When is MS stop support Vista service pact 2 and a few questions about the upgrade to the new version

Hello comrades,.

I have a few questions and concerns, and hope that you guys can share with me some lights here.

1. What is MS stop supports the Covenant of service about the update of windows Vista 2 / other online support?

2. my computer is vista based 32 bit, ultimate version. I heard that there are a lot of wonderful things about Windows 8. Should I move to Windows 8, or should I actually wait awhile then buy a new computer with Windows 8 64 bit attached?

Honestly, it's a question that has been bothering me for some time. But my laptop is 4 GB of RAM, 1920 x 1080 HD display, 300 GB HARD drive at 5400 RPM (cost me a lot - it's a SONY) and have been works very well even with vista, the operating system highly complainted by many others. I think it would be a waste to buy a new computer, including the so-called net-books and i - PAD, I know, they are beautiful and sexy, but looking at their record, I was speechless. Yet knowing 32bits was maximum and MS has already announced that they stopped support for Vista SP1, consider that SP2 is expected online.

3. how long do you 32-bit based can last? Should I increase the RAM of 4 GB to 6 GB and upgrade to Windows 8?

4. How about 64-bit based of the future? Or is it true that most of the computer manufacturing starts in the future these application device of the base (not the real computer-driven software)?

5. or should I forget it all, wait 3-4 years, until my laptop would be a museum piece, then buy a desktop computer which monitor and hard drive is all separated, knowing it is the best technique for the $s and phone for mobile computing laptop use there?

I understand that this is somewhat a personal decision, but I really appreciate you guys Preview on the path of the operating system! Thank you

Yes it will work to buy a copy upgrade of Windows 8.   This is a custom installation rather than an upgrade in place once you switch between 32-bit and 64-bit.  However you can still save money by buying the upgrade license.

More important is that all the drivers you need will be available.  Your computer manufacturer will not write drivers for Windows 8 because the computer has been out of production far too long.

Windows 8 is a significant departure from previous versions and I suggest that you upgrade to Windows 7 If you are tired of Vista or wait until you buy a new computer before Windows 8.  You read the discussions on the forums of Windows 8 CP.  At this point, there are many critics of Windows 8 due to the removal of the Start button and Start Menu.  Many people dislike having to rely on style Metro Screen start for many things.  It is becoming a major concern.

To navigate to the Windows 8 CP forums use in the middle of the dropdown at the top of this forum page.

Note:  Microsoft has not announced that there will be copies upgrade for Windows 8.  Microsoft has already stopped providing copies of upgrade of Office is not yet clear what will be available for 8.

Tags: Windows

Similar Questions

  • a few questions about the Push Service

    Hi all

    Have some questions about a Service of BlackBerry Push.

    (1) when registering for the assessment, it is requested

    Source IP address for shoot - what happens if I have a dynamic IP and I have two servers different one for development and one for the Production environment?

    1. Push is via the BIS-B connection only
    2. Register to access push Eval with RIM. Download the SDK, which includes a sample application for the client side and 3 examples of applications for the side server. Once RIM gives you access to Eval, you'll have an app ID, password and other details. Deploy the provided sample applications and enter your Eval details when prompted. The client-side sample must be deployed on a real device (i.e. not a simulator). There is a catch: many developers (including myself) have reported on this forum that their client-side sample is not able to receive push messages.
    3. I did not look to push on BES, sorry.

    I am fairly new to push myself, feel free to correct me if I'm wrong.

  • Satellite L30: A few questions about the change from Vista to Win XP

    My satellite L30 has Vista Home Basic preinstalled, but I decided that Vista is still a little slow & buggy and would like to change to WinXP Pro. I have 2 questions-

    1. a change to XP will extend the battery performance? (currently 1 h with no wifi I think it's pretty poor)

    2. I intend to reformat the hard drive for all the hidden partitions will be lost. If I decide to go back to Vista, at a later date I will be able to reinstall using the "upgrade" dvd that came with my computer? I think I'm wrong in saying that this dvd contains a full version of Vista, but I wonder if my serial number still working?

    Thank you

    Hello

    If you bought the L30 with Vista operating system preinstalled, then I presume that you have received also the Toshiba Vista recovery CD.
    The Vista on the recovery CD is already enabled and you don't need to enter keys t.

    Regarding your battery question: well as you know the battery working time depends on the use of the laptop. Performance heavy on the laptop running decreases the life of the battery. It is a fact.

    But you assume the Vista needs of more resources for laptop as the XP and the Vista operating system wastes more energy than other operating systems.
    I think if you install XP on the laptop, you should be able to work with the battery a little longer as with Vista.

    Concerning

  • Question about the ADF Version supported Oracle database

    Hello

    One of my client's situation trigger this thread, they have a few Oracle 9.2.0.6 inherited instance, which turns out to be that a version of database not supported for JDeveloper/ADF 12.1.3, in this case, supports an earlier version of the ADF is the only choice without upgrading of database to 11.x for them?

    And I'm also interested to know why JDeveloper/ADF confined its support to some version of database Oracle, thank you

    -Liang Yi

    Hello

    If I'm not wrong then the Oracle 9i database is out of support since juil.-2007. JDeveloper and ADF certifies and supports the unsupported database versions or operating systems. So I hope that answers the "why". The real solution is to upgrade the database, because that's the reason that will block you for what your client is to move forward.

    Frank

  • Is there anyway to get the support from Adobe about the new version of LR?

    I spent hours trying to get LR6 to work in the CC.   I did everything mentioned in the forums without success.   Now my LR indicates that I have a trial!   I've been a user of CC since the beginning and now cannot use LR.   Is there any support from Adobe?  Chat options are no longer available.  They just don't care.

    Try to sign out and sign in return for Creative Cloud Desktop app and then check.

    Sign in, sign out | Creative office cloud app

  • A few questions about the management of the partitions when you perform a recovery

    Hello everyone,

    I bought a L505-13Z on weeks there are for personal use and editing of audio work light. In these two weeks, I took the time to explore and test the performance of this computer and judged suitable for my needs because it resists even havier audio work so I'll need, what it is tested. I am really satisfied with this laptop! In any case, some optimizations I did for audio software suffered a few necessary features of the computer, so I need to reinstall the operating system... Basically, I was always used to install only the system drive wiping system, leaving the score of "D: Data" intact. I noticed that this is not the case with the recovery of the system, because after the restoration, system partitions and data disappeared. of course everything is saved on an external drive, but every time I have to restore, I need to copy everything back from the backup drive? I missed the point of this - it's exactly like having all my data saved on the system partition. What, then, is the need for the data partition?

    Is there a way to recover and leave intact the partition 'Data'?

    My second question is if it is possible to change the size of the partitions somehow? I think it's a bit pointless to have 230G of free space for the system partition. 100G is sufficient for my needs, and I could use the 130G remaining for the data partition, I don't know why the drive is simply divided into two by default... (I am aware that a change of size of partition must erase all data on the disk).

    Thank you all in advance for any help!

    If you use the procedure of recovery disc HARD - http://aps2.toshiba-tro.de/kb0/HTD9102IR0000R01.htm - structure and the data on the second partition will not be deleted.
    So, if you want to install OS using HARD drive recovery option you can move all the important data of the C partition to D partition.

    The whole HARD disc will be deleted if you use recovery DVD for installing the OS.
    ----------------------------------------------------------
    You should not change the partition structure because it can have a negative influence on the recovery procedure more HARD drive. It can happen that data recovery will be will be more found.

    Please note: second partition D is not a kind of system partition or recovery. This is normal and usual HARD disk partition. He is saved just Toshiba recovery image in the folder called HDDRecovery.
    You can do it, I did too, it is better to enter the properties of this file and set it as invisible.

    You will not be irritated by this file. It's there, but you can not see and there is no way that you can remove it somehow. Use this partition as usual. Create own folders, copy data here, just do your usual work.

    Any other questions?

  • Device CD/DVD Toshiba HD DVD (not Bluray) does not work after installing Vista Service Pact 2

    Computer computer = laptop Acer Aspire AS9810-6829
    S/N = LXAF 15 707 0065 023 00 60V0
    Operating system = Windows Vista Ultimate... Service Pack 2
    Problem = DVD player does not work!
    DVD model = TOSHIBA DVGW/HD TS-L802A ATA Device

    Measures taken by the owner to correct the problem.
    1. check the Device Manager and records the following information:

    Windows cannot start this hardware device because its
    information of configuration (in the registry) is incomplete or damaged.
    (Code 19)

    Click on 'Search for solutions' to send data about this device to
    Microsoft and see if there is a solution available.

    2. Replace hard drive with a backup hard drive for 8 monthe ago.
    The DVD worked correctly with the old disk installed hard & Vista Service Pact 1.

    3. has concluded that the information in the registry for the DVD has been damaged.

    4. do you have a complete 'Clean Install' of the operating system and all applications.

    5. the problem seems to be resolved.  The DVD worked.

    6 Windows began its update procedure.  Several updates have been installed as well as
    Service Pack 1.  After each installation of the DVD worked fine.

    03:07 days of windows update, Windows Service Pack 2 has been installed.

    8. immediately after installing Windows Service Pact 2 DVD has stopped working
    Device Manager displays the same message that appears at the point 1 above.

    9. Please help!

    Ken Lewis
    E-mail address is removed from the privacy *.

    https://support.Microsoft.com/OAS/default.aspx?PRID=13014&Gprid=582034&St=1

    Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support for SP2 is valid until February 26, 2010.

    Microsoft free support for Vista SP2 at the link above.

    See you soon.

    Mick Murphy - Microsoft partner

  • When I scan for Windows Vista Service Pack update (published 4/2009) comes in,

    I redid my computer a few months ago restore to factory settings and restore my files from a backup disk. Everything seemed to work properly.  A few weeks ago a full scan found a worm & some virus which I removed. Now, I have a problem with the updates. When I scan for Windows Vista Service Pack update (published 4/2009) arrives.  When I click to install it, it is saying it is correctly installed (in 30 seconds) and yet he continues to come when I'm scanning for updates.    Should I restore settings again?  After looking for info on the forums of windows, I did the System File Checker to check corrupt files.  Several corrupted files appear in the details of the SFC.  But their fixation is "over my head".   I glued the SFC details below. Any help would be appreciated.  Thank you

    2012-09-04 11:51:44, info CSI 00000006 [SR] components check 100 (0 x 00000064)
    2012-09-04 11:51:44, transaction Info CSI 00000007 [SR] beginning verify and repair
    2012-09-04 11:51:47, info CSI 00000009 [SR] full audit
    2012-09-04 11:51:48, CSI of information 0000000 components [SR] a check 100 (0 x 00000064)
    2012-09-04 11:51:48, CSI Info 0000000b transaction [SR] beginning verify and repair
    2012-09-04 11:51:53, CSI to 0000000 d [SR] full audit information
    2012-09-04 11:51:53, CSI 0000000e Info [SR] components check 100 (0 x 00000064)
    2012-09-04 11:51:53, CSI Info 0000000f transaction [SR] beginning verify and repair
    2012-09-04 11:51:55, info CSI 00000011 [SR] full audit
    2012-09-04 11:51:56, info CSI 00000012 [SR] components check 100 (0 x 00000064)
    2012-09-04 11:51:56, transaction Info CSI 00000013 [SR] beginning verify and repair
    2012-09-04 11:51:57, info CSI 00000015 [SR] full audit
    2012-09-04 11:51:57, info CSI 00000016 [SR] components check 100 (0 x 00000064)
    2012-09-04 11:51:57, Info CSI 00000017 [SR] beginning verify and repair
    2012-09-04 11:51:59, info CSI 00000019 [SR] full audit
    2012-09-04 11:51:59, CSI Info 0000001 components [SR] a check 100 (0 x 00000064)
    2012-09-04 11:51:59, CSI Info 0000001 b transaction [SR] beginning verify and repair
    2012-09-04 11:52:01, CSI Info 0000001 d [SR] full audit
    2012-09-04 11:52:01, 0000001e Info [SR] CSI components check 100 (0 x 00000064)
    2012-09-04 11:52:01, CSI Info 0000001f transaction [SR] beginning verify and repair
    2012-09-04 11:52:03, info CSI 00000021 [SR] full audit
    2012-09-04 11:52:03, info CSI 00000022 [SR] components check 100 (0 x 00000064)
    2012-09-04 11:52:03, transaction Info CSI 00000023 [SR] beginning verify and repair
    2012-09-04 11:52:04, info CSI 00000025 [SR] full audit
    2012-09-04 11:52:05, info CSI 00000026 [SR] components check 100 (0 x 00000064)
    2012-09-04 11:52:05, the transaction Info CSI 00000027 [SR] beginning verify and repair
    2012-09-04 11:52:06, info CSI 00000029 [SR] full audit
    2012-09-04 11:52:07, CSI Info 0000002 components [SR] a check 100 (0 x 00000064)
    2012-09-04 11:52:07, CSI Info 0000002b transaction [SR] beginning verify and repair
    2012-09-04 11:52:09, info CSI 0000002d [SR] full audit
    2012-09-04 11:52:09, CSI [SR] 0000002e Info components check 100 (0 x 00000064)
    2012-09-04 11:52:09, CSI Info 0000002f transaction [SR] beginning verify and repair
    2012-09-04 11:52:11, info CSI 00000031 [SR] full audit
    2012-09-04 11:52:12, info CSI 00000032 [SR] components check 100 (0 x 00000064)
    2012-09-04 11:52:12, transaction Info CSI 00000033 [SR] beginning verify and repair
    2012-09-04 11:52:13, info CSI 00000035 [SR] full audit
    2012-09-04 11:52:14, info CSI 00000036 [SR] components check 100 (0 x 00000064)
    2012-09-04 11:52:14, transaction Info CSI 00000037 [SR] beginning verify and repair
    2012-09-04 11:52:15, Info CSI 00000039 [SR] check complete
    2012-09-04 11:52:16, CSI Info 0000003 components [SR] a check 100 (0 x 00000064)
    2012-09-04 11:52:16, CSI Info 0000003b transaction [SR] beginning verify and repair
    2012-09-04 11:52:19, info CSI 0000003d [SR] full audit
    2012-09-04 11:52:19, CSI 0000003e [SR] Info components check 100 (0 x 00000064)
    2012-09-04 11:52:19, CSI Info 0000003f transaction [SR] beginning verify and repair
    2012-09-04 11:52:24, info CSI 00000041 [SR] full audit
    2012-09-04 11:52:24, info CSI 00000042 [SR] components check 100 (0 x 00000064)
    2012-09-04 11:52:24, transaction Info CSI 00000043 [SR] beginning verify and repair
    2012-09-04 11:52:29, info CSI 00000046 [SR] full audit
    2012-09-04 11:52:29, info CSI 00000047 [SR] components check 100 (0 x 00000064)
    2012-09-04 11:52:29, transaction Info CSI 00000048 [SR] beginning verify and repair
    2012-09-04 11:52:33, CSI Info 0000004a Verify [SR] full
    2012-09-04 11:52:34, CSI Info 0000004 components [SR] b check 100 (0 x 00000064)
    2012-09-04 11:52:34, CSI Info 0000004 c [SR] beginning verify and repair operation
    2012-09-04 11:52:37, CSI 0000004f [SR] Verify Info full
    2012-09-04 11:52:38, info CSI 00000050 [SR] components check 100 (0 x 00000064)
    2012-09-04 11:52:38, Info CSI 00000051 [SR] beginning verify and repair
    2012-09-04 11:52:43, info CSI 00000053 [SR] full audit
    2012-09-04 11:52:43, info CSI 00000054 [SR] components check 100 (0 x 00000064)
    2012-09-04 11:52:43, transaction Info CSI 00000055 [SR] beginning verify and repair
    2012-09-04 11:52:51, CSI 0000005f [SR] Verify Info full
    2012-09-04 11:52:51, info CSI 00000060 [SR] components check 100 (0 x 00000064)
    2012-09-04 11:52:51, transaction Info CSI 00000061 [SR] beginning verify and repair
    2012-09-04 11:52:55, info CSI 00000063 [SR] full audit
    2012-09-04 11:52:56, info CSI 00000064 [SR] components check 100 (0 x 00000064)
    2012-09-04 11:52:56, transaction Info CSI 00000065 [SR] beginning verify and repair
    2012-09-04 11:53, info CSI 00000067 [SR] full audit
    2012-09-04 11:53, info CSI 00000068 [SR] components check 100 (0 x 00000064)
    2012-09-04 11:53, transaction Info CSI 00000069 [SR] beginning verify and repair
    2012-09-04 11:53:05, CSI Info 0000006b Verify [SR] full
    2012-09-04 11:53:06, components of CSI Info 0000006 c [SR] 100 audit (0 x 00000064)
    2012-09-04 11:53:06, CSI Info 0000006 d [SR] beginning verify and repair transaction
    2012-09-04 11:53:14, CSI Info 0000006f Verify [SR] full
    2012-09-04 11:53:15, info CSI 00000070 [SR] components check 100 (0 x 00000064)
    2012-09-04 11:53:15, transaction Info CSI 00000071 [SR] beginning verify and repair
    2012-09-04 11:53:24, Info CSI 00000075 [SR] check complete
    2012-09-04 11:53:24, info CSI 00000076 [SR] components check 100 (0 x 00000064)
    2012-09-04 11:53:24, transaction Info CSI 00000077 [SR] beginning verify and repair
    2012-09-04 11:53:38, info CSI 00000079 [SR] full audit
    2012-09-04 11:53:38, CSI Info 0000007 components [SR] a check 100 (0 x 00000064)
    2012-09-04 11:53:38, CSI Info 0000007 b transaction [SR] beginning verify and repair
    2012-09-04 11:53:52, CSI Info 0000007 d [SR] full audit
    2012-09-04 11:53:52, CSI 0000007e Info [SR] components check 100 (0 x 00000064)
    2012-09-04 11:53:52, CSI Info 0000007f transaction [SR] beginning verify and repair
    2012-09-04 11:53:55, info CSI 00000081 [SR] full audit
    2012-09-04 11:53:55, info CSI 00000082 [SR] components check 100 (0 x 00000064)
    2012-09-04 11:53:55, transaction Info CSI 00000083 [SR] beginning verify and repair
    2012-09-04 11:53:57, info CSI 00000085 [SR] full audit
    2012-09-04 11:53:57, info CSI 00000086 [SR] components check 100 (0 x 00000064)
    2012-09-04 11:53:57, Info CSI 00000087 [SR] beginning verify and repair
    2012-09-04 11:53:59, info CSI 00000089 [SR] full audit
    2012-09-04 11:53:59, CSI Info 0000008 components [SR] a check 100 (0 x 00000064)
    2012-09-04 11:53:59, CSI Info 0000008b transaction [SR] beginning verify and repair
    2012-09-04 11:54:09, 000000 a 9 CSI Info [SR] verification complete
    2012-09-04 11:54:10, 000000aa CSI Info [SR] components check 100 (0 x 00000064)
    2012-09-04 11:54:10, CSI Info 000000ab transaction [SR] beginning verify and repair
    2012-09-04 11:54:11, 000000ad CSI Info [SR] verification complete
    2012-09-04 11:54:11, 000000ae CSI Info [SR] components check 100 (0 x 00000064)
    2012-09-04 11:54:11, 000000af CSI Info transaction [SR] beginning verify and repair
    2012-09-04 11:54:14, 000000 b 1 CSI Info [SR] verification complete
    2012-09-04 11:54:15, 000000 b 2 CSI Info [SR] components check 100 (0 x 00000064)
    2012-09-04 11:54:15, 000000 b 3 CSI Info transaction [SR] beginning verify and repair
    2012-09-04 11:54:19, 000000 b 5 CSI Info [SR] verification complete
    2012-09-04 11:54:19, 000000 b 6 CSI Info [SR] components check 100 (0 x 00000064)
    2012-09-04 11:54:19, 000000 b 7 CSI Info transaction [SR] beginning verify and repair
    2012-09-04 11:54:26, 000000 b 9 CSI Info [SR] verification complete
    2012-09-04 11:54:27, 000000ba CSI Info [SR] components check 100 (0 x 00000064)
    2012-09-04 11:54:27, 000000bb CSI Info transaction [SR] beginning verify and repair
    2012-09-04 11:54:32, 000000bd CSI Info [SR] verification complete
    2012-09-04 11:54:32, 000000be CSI Info [SR] components check 100 (0 x 00000064)
    2012-09-04 11:54:32, CSI Info 000000bf transaction [SR] beginning verify and repair
    2012-09-04 11:54:38, CSI Info 000000 c 1 [SR] full check
    2012-09-04 11:54:38, CSI Info 000000 c 2 [SR] components check 100 (0 x 00000064)
    2012-09-04 11:54:38, CSI Info 000000 c 3 [SR] beginning operation check and repair
    2012-09-04 11:54:42, CSI Info 000000 c 5 [SR] full check
    2012-09-04 11:54:42, CSI 000000C6 [SR] components Info check 100 (0 x 00000064)
    2012-09-04 11:54:42, CSI Info 000000 c 7 [SR] beginning operation check and repair
    2012-09-04 11:54:46, CSI Info 000000 c 9 [SR] full check
    2012-09-04 11:54:47, 000000 CSI Info [SR] this component check 100 (0 x 00000064)
    2012-09-04 11:54:47, CSI Info 000000cb transaction [SR] beginning verify and repair
    2012-09-04 11:54:57, CSI Info 000000dc Verify [SR] full
    2012-09-04 11:54:57, Info CSI [SR] 000000dd components check 100 (0 x 00000064)
    2012-09-04 11:54:57, CSI Info 000000de transaction [SR] beginning verify and repair
    2012-09-04 11:55:08, 000000f4 CSI Info [SR] verification complete
    2012-09-04 11:55:09, 000000f5 CSI Info [SR] components check 100 (0 x 00000064)
    2012-09-04 11:55:09, CSI Info 000000f6 transaction [SR] beginning verify and repair
    2012-09-04 11:55:30, 000000f8 CSI Info [SR] verification complete
    2012-09-04 11:55:31, 000000f9 CSI Info [SR] components check 100 (0 x 00000064)
    2012-09-04 11:55:31, 000000fa CSI Info transaction [SR] beginning verify and repair
    2012-09-04 11:55:42, CSI Info 000000 fc [SR] full audit
    2012-09-04 11:55:42, 000000fd CSI Info [SR] components check 100 (0 x 00000064)
    2012-09-04 11:55:42, CSI Info 000000fe transaction [SR] beginning verify and repair
    2012-09-04 11:55:55, info CSI 00000100 [SR] full audit
    2012-09-04 11:55:55, info CSI 00000101 [SR] components check 100 (0 x 00000064)
    2012-09-04 11:55:55, transaction Info CSI 00000102 [SR] beginning verify and repair
    2012-09-04 11:55:57, info CSI 00000104 [SR] cannot repair the military record [l:20 {10}] "tcpmon.ini" Microsoft-Windows-printing-StandardPortMonitor-TCPMonINI, Version = 6.0.6000.16386, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "
    2012-09-04 11:56:01, info CSI 00000106 [SR] cannot repair the military record [l:20 {10}] "tcpmon.ini" Microsoft-Windows-printing-StandardPortMonitor-TCPMonINI, Version = 6.0.6000.16386, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "
    2012-09-04 11:56:01, info CSI 00000107 [SR] this element is referenced by [ml:38 {19}, l:36 {18}] "Windows Foundation.
    2012-09-04 11:56:01, CSI Info 0000010a [SR] could not reproject corrupted file [ml:520 {260}, l:46 {23}] '------? \C:\Windows\System32"\[l:20{10}]"TCPMon.ini '; source file in the store is also corrupted
    2012-09-04 11:56:01, CSI Info 0000010 c [SR] full audit
    2012-09-04 11:56:01, components of CSI Info 0000010 d [SR] 100 audit (0 x 00000064)
    2012-09-04 11:56:01, Info CSI 0000010e transaction [SR] beginning verify and repair
    2012-09-04 11:56:06, info CSI 00000110 [SR] full audit
    2012-09-04 11:56:06, info CSI 00000111 [SR] components check 100 (0 x 00000064)
    2012-09-04 11:56:06, transaction Info CSI 00000112 [SR] beginning verify and repair
    2012-09-04 11:56:11, info CSI 00000115 [SR] full audit
    2012-09-04 11:56:11, info CSI 00000116 [SR] components check 100 (0 x 00000064)
    2012-09-04 11:56:11, transaction Info CSI 00000117 [SR] beginning verify and repair
    2012-09-04 11:56:24, Info CSI 00000119 [SR] check complete
    2012-09-04 11:56:24, CSI Info 0000011 components [SR] a check 100 (0 x 00000064)
    2012-09-04 11:56:24, CSI Info 0000011b transaction [SR] beginning verify and repair
    2012-09-04 11:56:31, CSI Info 0000011 d [SR] full audit
    2012-09-04 11:56:31, CSI 0000011e [SR] Info components check 100 (0 x 00000064)
    2012-09-04 11:56:31, CSI Info 0000011f transaction [SR] beginning verify and repair
    2012-09-04 11:56:38, info CSI 00000121 [SR] full audit
    2012-09-04 11:56:39, 00000122 CSI info [SR] components check 100 (0 x 00000064)
    2012-09-04 11:56:39, transaction Info CSI 00000123 [SR] beginning verify and repair
    2012-09-04 11:56:45, info CSI 00000125 [SR] cannot repair the military record [l:24 {12}] "settings.ini" Microsoft-Windows-Sidebar, Version = 6.0.6000.16615, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "
    2012-09-04 11:56:49, info CSI 00000127 [SR] cannot repair the military record [l:24 {12}] "settings.ini" Microsoft-Windows-Sidebar, Version = 6.0.6000.16615, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "
    2012-09-04 11:56:49, info CSI 00000128 [SR] this element is referenced by [l:160 {80}] "' Package_37_for_KB943411 ~ 31bf3856ad364e35 ~ x 86 ~ ~ 6.0.1.5.943411 - 110_RTM_neutral_GDR" "
    2012-09-04 11:56:49, CSI Info 0000012b [SR] could not reproject corrupted file [ml:520 {260}, l:72 {36}] '------? "\C:\Program Files\Windows Sidebar"------[l:24 {12}] "settings.ini"; source file in the store is also corrupted
    2012-09-04 11:56:50, info CSI 0000012d [SR] full audit
    2012-09-04 11:56:50, CSI 0000012e [SR] Info components check 100 (0 x 00000064)
    2012-09-04 11:56:50, CSI Info 0000012f transaction [SR] beginning verify and repair
    2012-09-04 11:56:56, info CSI 00000131 [SR] full audit
    2012-09-04 11:56:56, info CSI 00000132 [SR] components check 100 (0 x 00000064)
    2012-09-04 11:56:56, transaction Info CSI 00000133 [SR] beginning verify and repair
    2012-09-04 11:57:05, info CSI 00000135 [SR] full audit
    2012-09-04 11:57:06, info CSI 00000136 [SR] components check 100 (0 x 00000064)
    2012-09-04 11:57:06, transaction Info CSI 00000137 [SR] beginning verify and repair
    2012-09-04 11:57:18, CSI Info 0000013a Verify [SR] full
    2012-09-04 11:57:18, CSI Info 0000013 components [SR] b check 100 (0 x 00000064)
    2012-09-04 11:57:18, CSI Info 0000013 c [SR] beginning verify and repair operation
    2012-09-04 11:57:22, Info CSI 0000013e [SR] full Verify
    2012-09-04 11:57:23, CSI 0000013f [SR] components Info check 100 (0 x 00000064)
    2012-09-04 11:57:23, transaction Info 00000140 CSI [SR] beginning verify and repair
    2012-09-04 11:57:29, info CSI 00000142 [SR] full audit
    2012-09-04 11:57:29, info CSI 00000143 [SR] components check 100 (0 x 00000064)
    2012-09-04 11:57:29, transaction Info CSI 00000144 [SR] beginning verify and repair
    2012-09-04 11:57:34, Info CSI 00000146 [SR] full check
    2012-09-04 11:57:34, Info CSI 00000147 [SR] components check 100 (0 x 00000064)
    2012-09-04 11:57:34, transaction Info CSI 00000148 [SR] beginning verify and repair
    2012-09-04 11:57:42, CSI Info 0000014a Verify [SR] full
    2012-09-04 11:57:42, CSI Info 0000014 components [SR] b check 100 (0 x 00000064)
    2012-09-04 11:57:42, CSI Info 0000014 c [SR] beginning verify and repair operation
    2012-09-04 11:57:51, Info CSI 0000014e [SR] full Verify
    2012-09-04 11:57:51, CSI 0000014f [SR] components Info check 100 (0 x 00000064)
    2012-09-04 11:57:51, transaction Info CSI 00000150 [SR] beginning verify and repair
    2012-09-04 11:57:55, info CSI 00000152 [SR] full audit
    2012-09-04 11:57:55, info CSI 00000153 [SR] components check 100 (0 x 00000064)
    2012-09-04 11:57:55, transaction Info CSI 00000154 [SR] beginning verify and repair
    2012-09-04 11:58, info CSI 00000156 [SR] full audit
    2012-09-04 11:58:01, info CSI 00000157 [SR] components check 100 (0 x 00000064)
    2012-09-04 11:58:01, Info CSI 00000158 [SR] beginning verify and repair
    2012-09-04 11:58:05, CSI Info 0000015a Verify [SR] full
    2012-09-04 11:58:05, CSI Info 0000015 components [SR] b check 100 (0 x 00000064)
    2012-09-04 11:58:05, CSI Info 0000015 c [SR] beginning verify and repair operation
    2012-09-04 11:58:10, Info CSI 0000015e [SR] full Verify
    2012-09-04 11:58:11, CSI 0000015f [SR] components Info check 100 (0 x 00000064)
    2012-09-04 11:58:11, transaction Info CSI 00000160 [SR] beginning verify and repair
    2012-09-04 11:58:16, Info CSI 00000162 [SR] check complete
    2012-09-04 11:58:17, info CSI 00000163 [SR] components check 100 (0 x 00000064)
    2012-09-04 11:58:17, transaction Info CSI 00000164 [SR] beginning verify and repair
    2012-09-04 11:58:20, Info CSI 00000166 [SR] check complete
    2012-09-04 11:58:20, 00000167 CSI info [SR] components check 100 (0 x 00000064)
    2012-09-04 11:58:20, transaction Info CSI 00000168 [SR] beginning verify and repair
    2012-09-04 11:58:24, CSI Info 0000016a Verify [SR] full
    2012-09-04 11:58:25, CSI Info 0000016b [SR] audit 92 (0x0000005c) components
    2012-09-04 11:58:25, CSI Info 0000016 c [SR] beginning verify and repair operation
    2012-09-04 11:58:31, Info CSI 0000016e [SR] full Verify
    2012-09-04 11:58:31, CSI 0000016f [SR] repair 2 Info components
    2012-09-04 11:58:31, transaction Info CSI 00000170 [SR] beginning verify and repair
    2012-09-04 11:58:31, info CSI 00000172 [SR] cannot repair the military record [l:20 {10}] "tcpmon.ini" Microsoft-Windows-printing-StandardPortMonitor-TCPMonINI, Version = 6.0.6000.16386, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "
    2012-09-04 11:58:31, info CSI 00000174 [SR] cannot repair the military record [l:24 {12}] "settings.ini" Microsoft-Windows-Sidebar, Version = 6.0.6000.16615, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "
    2012-09-04 11:58:31, info CSI 00000176 [SR] cannot repair the military record [l:20 {10}] "tcpmon.ini" Microsoft-Windows-printing-StandardPortMonitor-TCPMonINI, Version = 6.0.6000.16386, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "
    2012-09-04 11:58:31, Info CSI 00000177 [SR] this element is referenced by [ml:38 {19}, l:36 {18}] "Windows Foundation.
    2012-09-04 11:58:31, CSI Info 0000017a [SR] could not reproject corrupted file [ml:520 {260}, l:46 {23}] '------? \C:\Windows\System32"\[l:20{10}]"TCPMon.ini '; source file in the store is also corrupted
    2012-09-04 11:58:31, CSI Info 0000017 c [SR] cannot repair the military record [l:24 {12}] "settings.ini" Microsoft-Windows-Sidebar, Version = 6.0.6000.16615, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "
    2012-09-04 11:58:31, CSI Info 0000017 d [SR] this element is referenced by [l:160 {80}] "' Package_37_for_KB943411 ~ 31bf3856ad364e35 ~ x 86 ~ ~ 6.0.1.5.943411 - 110_RTM_neutral_GDR" "
    2012-09-04 11:58:31, info CSI 00000180 [SR] could not reproject corrupted file [ml:520 {260}, l:72 {36}] '------? "\C:\Program Files\Windows Sidebar"------[l:24 {12}] "settings.ini"; source file in the store is also corrupted
    2012-09-04 11:58:32, info CSI 00000182 [SR] full repair
    2012-09-04 11:58:32, info CSI 00000183 [SR] validation of transaction
    2012-09-04 11:58:32, info CSI 00000187 [SR] check and complete repair operation. All of the files and registry keys listed in this operation were repaired successfully

    Hi Mzvern,

    ·         If she invites only to install Vista Service Pack?

    That Factory Restore is the last step in resolving this issue.

    Follow these steps to see what Windows Update is originally the question or any error message/code:

    a. click Start, type Update in the start search box.

    b. in the list of results, click Windows Update.

    (c) in the left pane, click view update history.

    In the meantime, follow the suggestions below for a possible solution:

    Method 1: I suggest you follow the article and then check if it solves the problem.

    Windows Update or Microsoft Update repeatedly offers the same update

    http://support.Microsoft.com/kb/910339

     

    Registry warning

    To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft article:

    Back up the registry

    http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

    Important: During the scan of the hard drive if bad sectors are found, the scanner tries to repair this sector, all available on which data may be lost.

    Method 2: For cause of CFS, it wasn't able to repair files of Member, you can follow these steps.

    If the System File Checker tool cannot repair a file, follow these steps:1.At a command prompt, type the following command and press ENTER:

    takeown /f Path_And_File_Name

    For example, type takeown /f E:\windows\system32\jscript.dll.

    2. type the following command and press ENTER to grant administrators full access to the file:

    ICACLS Path_And_File_Name/grant ADMINISTRATORS: F

    For example, type icacls E:\windows\system32\jscript.dll/grant administrators: F.

    3. type the following command to replace the file with a known good copy of the file:

    Copy Path_And_File_Name_Of_Source_File Path_And_File_Name_Of_Destination

    For example, type copy E:\temp\jscript.dll E:\windows\system32\jscript.dll.

    For more information, see the following articles:

    How to analyze the entries in the log file generating the program Checker (SFC.exe) resources of Microsoft Windows in Windows Vista

    http://support.Microsoft.com/kb/928228

     

    Problems with installing updates

    http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

     

    Let us know the results.

  • I use Windows vista service pack 2 and when I download an attachment to an email and try to print I get this error message: Error Message 0 X % 1 in the message for %2 file

    original title: Error Message 0 X % 1 in the message file for %2
    I use Windows vista service pack 2 and when I download an attachment to an email and try to print I get the above error message.

    How I can fix

    Hi SusanReid,

    1. what email program are you using?
    2. you are trying to download from webmail or any mail client?
    3. don't download you and save the attachment or open it directly?
    4. What is the brand and model of the printer?

    I suggest to save the attachment and then print.

  • Cannot install windows vista service pack 1 and 2 error: 8007006E

    Original title: Windows Service Pack 1 and 2 will be not updated

    I tried a few times to download the Service packs 1 and 2 so that I can reinstall my Windows live messenger. I didn't have time to let it run full the last time, but this time, her gives me: "error (s) found: Code 8007006E - Windows has encountered an unknown error.

    Usually I have no problem with my updates, they fit very well. This time, of course when I need it, he decides to not work (Murphey's law).
    How to fix this or get to download correctly, so I can reuse my Messenger? I uninstalled my Messenger when it stopped working (would not allow me to connect to all) for about a month or two.
    Thank you!!!

    Hello

    1. can you install other windows updates?

    I suggest you to follow the steps below and check if it helps.

    Method 1: Try to reset the Windows update components and check to see if the same problem happens: http://support.microsoft.com/kb/971058

    Method 2:

     Try to put your computer in a clean boot state, and then try to install Windows vista service pack 1 and 2 manually.

    By setting your boot system minimum state helps determine if third-party applications or startup items are causing the problem.

    How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
    http://support.Microsoft.com/kb/929135

    Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode.

    Method 3: Try to install Windows vista service pack 1 and 2 from the link below.

    Service pack 1: http://windows.microsoft.com/en-US/windows-vista/Learn-how-to-install-Windows-Vista-Service-Pack-1-SP1

    Service pack 2: http://windows.microsoft.com/en-US/windows-vista/Learn-how-to-install-Windows-Vista-Service-Pack-2-SP2

    You can also consult the following link for more information:

    Troubleshoot problems with installing updates.

    http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

    Hope this information is useful.

  • After the release of windows vista service Pack 2 and flash 10 my system continues to blue screen

    After the last update of windows vista service Pack 2 and flash 10 that my system continues to blue screen, the solution has advised windows that will fix it is to uninstall flash and reinstal, it dosent solution work any ideas? I tried to roll back to Flash 9 and it's less, but happens again... someone has any ideas?

    First, uninstall Flash to make sure that's not the problem.  If the problem persists and if the problem is related to the installation of Vista SP2 (as seems to be the case), then Support Microsoft offers free technical support for installation of Vista SP2 issues at: https://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034&st=1&wfxredirect=1&sd=gn.  They are experts on these issues and you should take advantage of the offer, although it is still free.  I'm sure they will be able to help you.  Minimize (but do not deny) the update of Flash and to focus on the installation of SP2 when you explain the problem.

    I hope this helps.  If this isn't the case, after return and we'll see what we can do.

    Good luck!

    Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • Cannot install Vista service pack 2 is 800f0a09 error code with the message that there are problems with the driver for dell latitude

    Original title: why I get error code 800f0a09 to upgrade to windows vista service pack 2

    I have a laptop del that is running on Windows Vista Edition Home Premium. I tried to download itunes but it requires service pack 2. Whenever I try to update to service pack 2, I get the message following error code 800F0A09. He also mentioned problems with the driver for dell latitude. What can I do to fix this please.

    Thank you

    Hello

    Please join Microsoft Community where you can find the necessary information on Microsoft products!

    You can not install Vista Service pack 2 and get the error with code 800f0a09 and the message that there are problems with the driver for dell latitude.

    The problem may occur if some of the components of the update are corrupt.

    What is the full error message that you receive?

    I suggest you follow the steps mentioned below to check if the problem is with the update components:

    Method 1: Reset the update components

    See the site:

    How to reset the Windows Update components?

    http://support.Microsoft.com/kb/971058

    Warning: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

    http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

    Method 2: Run the system update readiness tool

     

    See the site:

    System update scan tool corrects errors of Windows Update in Windows 8, Windows 7, Windows Vista, Windows Server 2008 R2 and Windows Server 2008

    http://support.Microsoft.com/kb/947821

    Method 3: Turn off the antivirus software

     

    See the site:

    Disable the anti-virus software

    http://Windows.Microsoft.com/en-in/Windows-Vista/disable-antivirus-software

    Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

    I hope this helps. If the problem persists, let know us and we would be happy to help you.

  • I installed windows vista service pack 1 and now problems

    I installed windows vista service pack 1, and now it will not connect to the printer and I have no sound! I've updated the drivers of the two, and they work both according to their status of device but no sounds or printer connection. Help, please.

    Once solve you the problems with SP1, you can then start of SP2.

    How to resolve problems that you experience after you install a Service Pack for Windows Vista
    http://support.Microsoft.com/kb/948481

    A device driver is not installed or a hardware device does not work correctly after you install a Service Pack for Windows Vista
    http://support.Microsoft.com/kb/948187

    Important: things to know before you download Windows Vista SP1
    http://TechNet.Microsoft.com/en-us/windowsvista/bb968859.aspx

    Learn how to install Windows Vista Service Pack 1 (SP1)
    http://windowshelp.Microsoft.com/Windows/en-us/help/133c8953-c9cd-4FA5-8883-03e91bb6f2021033.mspx

    and - how to uninstall Windows Vista service packs as a troubleshooting step
    http://support.Microsoft.com/kb/948537

    Learn how to install Windows Vista Service Pack 2 (SP2)
    http://windowshelp.Microsoft.com/Windows/en-GB/help/105f7420-6f7f-4FE8-8698-2f40ca5f53711033.mspx

    Information about Service Pack 2 for Windows Vista and Windows Server 2008
    http://support.Microsoft.com/kb/948465

    Windows Server 2008 Service Pack 2 and Windows Vista Service Pack 2-five language standalone (KB948465)
    http://www.Microsoft.com/downloads/details.aspx?FamilyId=a4dd31d5-F907-4406-9012-a5c3199ea2b3&displaylang=en

    How to get the latest Vista Service Pack
    http://support.Microsoft.com/kb/935791

  • I download the latest version of Firefox, but when I go to sign up for google + it tells me that my browser is no longer supported. I tried uninstalling and everything, but can not get the new version appears. Any Suggestions?

    I download the latest version of Firefox, but when I go to sign up for google + it tells me that my browser is no longer supported. I tried uninstalling and everything, but can not get the new version appears. Any Suggestions?

    Please see that.

  • An error occurred when DNS was questioned about the resource record (SRV) service location used to locate a domain controller Active Directory (AD DC) for the domain 'HAMI. LOCAL ".

    An error occurred when DNS was questioned about the resource record (SRV) service location used to locate a domain controller Active Directory (AD DC) for the domain 'HAMI. LOCAL ".

    The error was: "an existing connection was to be closed by the remote host".
    (0 x 00002746 WSAECONNRESET error code)

    The query was for the SRV record for _ldap._tcp.dc._msdcs. HAMI. LOCAL

    Hello

    Your question of Windows 7 is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the Forums TechNet Windows 7 Technet.

    Here is the link:
    http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads

    Hope this helps

Maybe you are looking for