When presseing bar space to maneuver around a photoshop mockup, I get a "ding".

Similar Questions

• What happened to the feature to get around on the artboard by pressing the space bar and dragging with the mouse?

  What happened to the feature to get around on the artboard by pressing the space bar and dragging with the mouse?

  cwalker,

  If it does not, it may be time for the list:

  Sometimes, (some) things may fail or stop working for no apparent reason. When (other) possible reasons/remedies do not work, it is perhaps a kind corruption (temporary or permanent), or even preference settings which disturbs, which can be cured with something on the following list put in place in order to provide a catch-all solution for otherwise intractable cases. It starts with a few easy suggestions and safe) 1 and 2) for cases less serious and goes two ways 3) and 4) to reset the default preferences (easily but irreversibly and more laboriously but more completely and also reversible), then follows a list 5) various other possibilities, and it ends with a complete reinstallation 6). If no other suggestion doesn't work, or if no other suggestion appears, you can start on the list and decide how to go or who can apply.

  The following is a general list of things, try when

  (A) the question is not in a specific file,

  (B) you have a printer installed, connected and turned on if it's a physical printer (you can use Adobe PDF/Acrobat Distiller as a printer by default without the need to have a printer on, of course you will need to specify when you really need print on paper), and

  (C) It is not caused by problems with opening a file from external media (see below).

  You tried/made some of them already; 1 and 2) are easier for temporary strangenesses and 3) and 4) specifically may be corrupted/inconvenient preferences); ((5) is a list in itself and 6) is the last resort.

  If possible / there is, you must record a current work first, of course.

  (1) close Illy and open again.

  (2) restart the computer (you can make up at least 5 times);

  (3) close Illy and press Ctrl + Alt + Shift / Cmd + Option + shift during startup (easy, but irreversible);

  4) move the folder (follow the link with this name) with closed Illy (more tedious but also more thorough and reversible), for CS3 - CC you can find the file here:

  https://helpx.Adobe.com/Illustrator/KB/preference-file-location-Illustrator.html

  5 look through and try the relevant among the other options (click on the link with that name, item 7) is a list of the usual suspects among other applications which can disturb and confuse Illy, point 15) applies to the maybe CS5, CS6 and CC);

  Even worse, you can:

  6 (A) uninstall (check the box to delete the preferences, if any), B) run the cleanup tool (if you have CS3/CS4/CS5/CS6/CC) and C) reinstall. It is important to use this step three way: otherwise, things may persist.

  http://www.Adobe.com/support/contact/cscleanertool.html

• Since the installation of El Capitan, my streaming to my Audioengine DAC D2 cut after 12 minutes (the default duration of sleep). It will restart by pressing the space bar. When I change the duration of sleep, the cut outs are becoming more frequent and i

  Since the installation of El Capitan, my streaming to my Audioengine DAC D2 cut after 12 minutes (the default duration of sleep). It will restart by pressing the space bar. When I change the duration of sleep, the cut outs are becoming more frequent and intermittent. Help?

  I checked the wifi and changed frequency (new modem, frequency change made no difference). The Board battery seems fine - all updates well. My computer is an iMac (2011), 3.1 GHz Intel Core i5, 8 GB 1333 MHz DDR3, with a new AMD Radeon graphics card. I recently installed a State strong 1 TB SATA drive and fitted with a LaCie Porsche 4 to USB for backup and a 4TB disk storage RAID LaCie drive.

  I'm frustrated, having to come in my computer since my living room every 12 minutes to continue to listen to Spotify on my stereo system.

  My guess is there a bug in the software of sleep in El Capitan, which disrupts his (I've tried different USB ports connect the Audioengine sender and same thing).

  Should I go back to Yosemite?

  Turiteaguy

  First of all, 10.11.3 OSX just came out. Try this.

• Escape the mouse pointer when you press the space bar

  My tecra has developed a problem where whenever I press the space bar, the mouse pointer out of the screen and the mobile guard in the upper right or sometimes down left for about 30 seconds then stops. happens in all weather conditions of applications that I use an optical mouse or the touchpad

  Hi Dave

  I had the same problem. Initially, the mouse was mad for 30 seconds, but shortly after, it was worse. I switched the keyboard and now everything is ok.

  Of course, the pointer of the mouse was defective. I'm sure that in your case the problem is the same.

  Good luck!

• Tecra M2 - if I press the space bar moves the cursor on the screen

  Hello

  I've reloaded Windows XP SP2 on my Tecra M2 today but have found the when you type if I press the space bar, the cursor moves on the screen, the cursor does this for between 10 and 30 seconds, it is not a major problem but it is a bit annoying.
  I installed all the drivers and utilities. Any help would be appreciated.

  Thank you
  Wez

  This occurs if you disable the touch pad using the FN + F9 key combination?

• Recover mode standby by pressing the space bar

  When I first set up Windows 7, I could recover mode standby by pressing the space bar. Now, I have to press the power button on the computer itself. How to get back to wake the computer by pressing right on the space bar?

  When I first set up Windows 7, I could recover mode standby by pressing the space bar. Now, I have to press the power button on the computer itself. How to get back to wake the computer by pressing right on the space bar?

  Hello

  Open Control Panel , and select keyboard.

  Select the Hardware tab.

  Click the Properties button.

  Click the change settings button.

  Select the Power Management tab.

  Select the allow this device to wake the computer .

  Click OK/apply/OK.

  Test and let us know the result.

  Thank you for using Windows 7

  Ronnie Vernon MVP

• Don't want to press the space bar, is there no other way?

  I don't want to press the space bar to do understand that I need it to oracle on plenty of space for this column, for example is there any new request around the following?
  
  Substr (Concat (V_column_name, ' '), 1, 10)

  Don't know what you're asking.

  Perhaps LPAD or RPAD?

• CRNT open anything without right click logoff crnt must press the space bar to click on logoff

  CRNT open anything on the desktop or journal by clicking the mouse, I have to press tab to get it on the sign out button, then press the space bar

  Hi maxinew,

  1. don't you make changes before the show?
  2. What is the brand and model of mouse?

  Try these steps and check the result.
  Step 1: Check your desktop configuration
  a. double click on my computer.
  b. on the Tools menu, click Folder Options.
  c. under the general tab, make sure that double-click to open an item (single-click to select) is selected.
  d. click on apply to save your changes to settings.
  e. click ok and close the computer window.
  f. check if the problem persists.

  Step 2: Reset the buttons of the mouse on their values
  a. Click Start, point to settings and then click Control Panel.
  b. double-click mouse.
  c. on the tab buttons, click default settings. If the problem is only with a specific program, click on the settings button, and choose this program and then click default settings.
  Note: If the default settings is not available, all your work button is already defined for the default mode.
  d. click OK and check the result.

  See the problems with the mouse button or scroll the parameters

  Visit our Microsoft answers feedback Forum and let us know what you think.

• I liquidated my bar. As the search bar when you type in the web address, and now I can get it back. I handed to the clicked place where I did to trun off (unchecked it), and I don't see anything again?

  I liquidated my bar. As the search bar when you type in the web address, and now I can get it back. I handed to the clicked place where I did to trun off (unchecked it), and I don't see anything again?

  Hold down the key (key in OSX) and press the following letters in this exact order: V T M
  The bar of menus must now appear permanently, unless you turn it off again (view > toolbars). Turn on/off the menu bar is a new feature in version 3.6.

  See the other bars under view > toolbars. By clicking on one of them will place a check mark (display) or remove the check mark (not shown).

  Then, in the Menu bar, go to view-> toolbars-> customize, then press the Restore Default Set .

• Pressing on space does not change input kanji in Japanese IME

  I use Windows 7 and tried to write Japanese before. It worked, but only in a separate window that shows the hiragana and kanji before placing it in the document itself. This separate window disappear with the deletion of the words and did not reappear in continuing to write, so that it no longer saw the entry. It was pretty boring and I tried to change the settings. Now all I do I just get entry hiragana and pressing space really just puts a space in the document but does not change the input of kanji.

  I used the Japanese input on my old computer with XP and the entrance to the right in the document and can be changed to kanji by pressing space. Is it possible to get settings in 7 schools and what to do, I have to change?

  It wasn't my problem. I have no problem switch between languages. I had grabbed in Japanese and got hiragana during the seizure but no kanji when you press the space key. However, I found that the conversion mode has been set no conversion. I must have gone to this accidentally by trying different settings. I get the normal conversion now.

• When I type a url, as soon as I hit the back, the text is covered by a black bar that makes the invisible url how can I get rid of this?

  When I type a url, as soon as I hit the back, the text is covered by a black bar that makes the invisible url how can I get rid of this?

  Could you check this thread started by another user of Linux and see if that helps:

  How can I stop firefox ffrom blocking URLS

• L460 keys repeat when pressed for 3 seconds

  When I press a button for at least 3 seconds, it repeats until I have tap again, as described in

  E460 keys repeat when pressed for 3 seconds

  There will be a Bios fix for the L460/L560 series as well? The Bug is quite annoying...

  In response to the client reported that after holding a key for 3 + seconds letter, the letter will continue to repeat on the screen until the key once again, while pressing results in solutions of numbers 2 arrow keys, 4, 6 or 8 entering E460, E560 and L460 ThinkPad, Lenovo provided through update BIOS for these systems.

  L460 BIOS v1.15 released 05/24/16 can be downloaded here: http://support.lenovo.com/us/en/products/Laptops-and-netbooks/ThinkPad-L-Series-laptops/ThinkPad-L46...

  E460 and BIOS E560 v1.17 released 28/04/16 can be downloaded here: http://support.lenovo.com/us/en/products/Laptops-and-netbooks/ThinkPad-Edge-laptops/ThinkPad-E560/do...

  Thank you

• When you type, the cursor jumps around. How can I correct this situation?

  When you type, the cursor jumps around.  How can I correct this situation?

  It is a very common problem when users become familiar with a new laptop. Either your palm/wrist/cuff/bracelet is touching the touchpad as you type or the touch pad sensitivity is set too high and reacts to strong strikes.
  • Someone to watch you while you type to see if you accidentally touch touchpad of the notebook.
  • Go to the control panel mouse configuration and reduce the sensitivity of the touchpad.
  • Make sure you use the latest version of the driver from the manufacturer of the laptop for the touchpad and update if a new becomes available.
  • Disable the touchpad entirely in favor of a wireless laptop mouse.
  As noted previously, this is a very common problem and users are usually completely unaware they do even when it is pointed out to them.

• Call a help file (.chm) when press a button on the front

  I can't call a help file (.chm) when press a button on the front. I have only called when press a key then right click the mouse and navigate the selected key for the button.

  Call the help file (.chm) when press a butto wrote:
  I have only called when press a key then right click the mouse and navigate the selected key for the button.

  This part is not so clear for me.

  But you have coded according to the part file .chm calling within the event to change the value of this button?

  If not try this using the Structure of the event & post here.

  If you post your code here, someone can help reg what has gone wrong.

• Iconia tab 7 A1-713. There is no 'restart' menu only "turn off" when press the button / stop

  Hello, is there no 'restart' menu on the screen when pressing the power since bought button tab. It displays only a menu of "turn off." How to solve this, please. Thanks anyway

  I can't find info on a restart in the menu stop although it would make sense.

  If she was here before, then you have EVS data and do a Factory reset.

  http://Acer--UK.custhelp.com/app/answers/detail/A_ID/29892/~/Acer-Iconia-B1-A71-and-B1-710-factory-d...