When set of database Setup error

Similar Questions

• System PeopleSoft database Setup error: PSDMTX error: access code

  People,
  
  Hello. I just installed MS SQL Server 2005 and PeopleTools 8.49 successfully. After that, I run D:\PT8.49\setup\PsMpDbInstall\setup.exe. The wizard runs by steps and connects to SQL Server 2005 successfully. Initializing the wizard Data Mover, it stops and the message as follows:
  
  "Invalid ID to access and password for the access code. psdmtx error. Installation failed load PeopleSoft data with following error message: error: psdmtx running. Please review the log file located under the directory of the log for more details. »
  
  I opened psdmtx.log and the message is: "' PSDMTX error: access code" "
  
  Due to the error above, I've implemented PeopleTools 8.49 Configuration Manager correctly. I also run a Script of Server Configuration 'spconfig.sql' and 'connect.sql' with the adequate development of < CONNECTID > and < CONNECTPS >.
  After that, I have run "D:\PT8.49\setup\PsMpDbInstall\setup.exe" again and get the same error.
  
  In 'setup.exe' Assistant, he has only 5 entries: ID symbolic PeopleSoft (sa1), PeopleSoft Access ID (sa), the PeopleSoft access password (mypass), PeopleSoft (people) and PeopleSoft login ID connect password (mypass).
  
  I know, PeopleSoft Access ID and password are used to communicate with SQL Server, and 2 values connect to SQL Server successfully. PeopleSoft Connect ID and password Connect are used to load the PeopleSoft database, and I put 2 values correctly. Symbolic PeopleSoft ID (sa1) is causing the problem?
  
  People can help solve this problem?
  
  Thank you.

  You install on a 64 bit OS?

  If so, you must configure your system DSN ODBC for PeopleTools 32-bit client from:
  * C:\Windows\syswow64\odbcad32.exe

  Confusion that the app has 32-bit in his name, and the 32-bit version of it lives in a folder named syswow64...

  Once you have configured the connection ODBC here, you should be able to connect to Data Mover, using the "bootstrap" mode (for example with the user his) and proceed with the installation.

• 11g R2 database Setup error

  during the installation of database 11 g R2, I get the following error
  file not found
  oc4j_applications\applications\em\em. War
  
  Please suggest

  Make sure you download and unzip the two files in the same directory.

  The way is to install 11 g without any error is

  extract the two Zip files anywhere-
  win64_11gR2_database_1of2.zip
  and win64_11gR2_database_2of2

  Then, copy all the content of the components of the second zip file folder... win64_11gR2_database_2of2\database\stage\Components\

  and paste it into the first folder of Zip files
  win64_11gR2_database_1of2\database\stage\Components\

  He will be working well
  and won't give any error.
  now
  simple to run the installer...

  Refer
  installing Oracle database 11g rel 2

  This should fix your error.

• Error occurred when setting up HA

  Hello

  IM problems to configure HA, the error is "year error occurred when setting up the HA Agent on the host."  I understand that this could be a DNS issue, I checked the/etc/hosts and everything seems fine.  Please see below:

  Do not remove the next line, or various programs

  1. who require network functionality will fail.

  127.0.0.1 localhost.localdomain localhost

  192.168.7.92 esx2.hazeware.net esx2

  192.168.7.91 esx1.hazeware.net esx1

  192.168.7.11 vc.hazeware.net vc

  I also checked the /etc/resolv.conf and who also seems very well.  Please see below:

  Search hazeware.net

  nameserver 192.168.7.10

  The two hosts and the VM (Virtual Center) can ping each other, Vmotion works very well, the DRS configuration is fine.  I have check the DNS Setup all that I can, I don't know what else to do, am I missing something?

  Also try stopping and restarting the virtual Center on your VC Server service... Working from time to time. Today, actually.

• I got a message when I open a window: "error: SQLITE_ERROR [1] the database: proc.» GetCurrentWebForms ".

  I got a message when I open a window: "error: SQLITE_ERROR [1] the database: proc.» GetCurrentWebForms ".

  Hi, Navy_K,

  It's out of the realm of Microsoft Answers.

  I suggest you post your query to

  SQL Server forums

  http://social.technet.Microsoft.com/forums/en-us/category/SQLServer

  Or,

  Microsoft TechNet Forum

  http://social.technet.Microsoft.com/forums/en-us/categories/

  Database Engine Error Severities

  http://TechNet.Microsoft.com/en-us/library/ms164086.aspx

• I want to install a program, but when I run the setup I have this error displays "an error (-5006: 0x8000ffff) occurred while runnig the Setup program."

  original title: Setup error.

  I want to install a program, but when I run the setup I have this error displays "an error (-5006: 0x8000ffff) occurred while runnig the Setup program."

  Please make sure you have finished any previous Setup and closed other applications. If the error persists, please contact your dealer.

  I solve the problem... All the error is the file. I don't know but he corrupted and I deleted it.

  I have download it again and the problem was solved. Thanks to you all.

• My SSD with a version of Dreamweaver CS6 running crashed. Now a new SSD is installed and every time I try to reinstall DW CS6 error "inconsistency in the database Setup" (in German terms) occurs. I tried to delete everything about t

  My SSD with a version of Dreamweaver CS6 running crashed. Now a new SSD is installed and every time I try to reinstall DW CS6 error "inconsistency in the database Setup" (in German terms) occurs. I tried to delete everything about CS6, rebootet and so forth--nothing worked. Two hours later, I tried to install DW 5.5 - that worked. Then I tried again to install 6.0 - without success. Can anyone help?

  Thank you for your response. I could not find caps.db.

  Meanwhile, I solved the problem as follows: I searched "dreamweaver" everywhere one deleted all that I could find. Then I googled "CS6" and did the same. I guess that there are around 20 or more places where I deleted files or directories. Suddenly, installation has not prevented, to 2%, what he has always done before and the installation was a success :-) It cost me more than 4 hours to understand this, and I have found a trick somewhere really help. Adobe itself I could not contact because I couldn't find an email address or a phone number - poor support for such expensive software. For luck, I didn't deliver something just in time. Missing a useful support, it's an attitude really poor, poor Adobe... I think that I do not buy not more products Adobe - it could cost too much of my time... :-(

• Error when setting the parameters on the tool

  Hi experts,
  
  I want to use ODIsqlunload, but it still gives the error. My win7 OS
  
  error:
  
  oracle.odi.oditools.OdiToolInvalidParameterException: error when setting the parameters on the tool
  at com.sunopsis.dwg.function.SnpsFunctionBase.getCoreOdiTool(SnpsFunctionBase.java:620)
  at com.sunopsis.dwg.function.SnpsFunctionBase.getSunopsisApi(SnpsFunctionBase.java:494)
  at com.sunopsis.dwg.dbobj.SnpSessTaskSql.executeOdiCommand(SnpSessTaskSql.java:1415)
  at oracle.odi.runtime.agent.execution.cmd.OdiCommandExecutor.execute(OdiCommandExecutor.java:32)
  at oracle.odi.runtime.agent.execution.cmd.OdiCommandExecutor.execute(OdiCommandExecutor.java:1)
  at oracle.odi.runtime.agent.execution.TaskExecutionHandler.handleTask(TaskExecutionHandler.java:50)
  at com.sunopsis.dwg.dbobj.SnpSessTaskSql.processTask(SnpSessTaskSql.java:2906)
  at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java:2609)
  at com.sunopsis.dwg.dbobj.SnpSessStep.treatAttachedTasks(SnpSessStep.java:540)
  at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java:453)
  at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java:1740)
  to oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$ 2.doAction(StartSessRequestProcessor.java:338)
  at oracle.odi.core.persistence.dwgobject.DwgObjectTemplate.execute(DwgObjectTemplate.java:214)
  at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.doProcessStartSessTask(StartSessRequestProcessor.java:272)
  to oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.access$ 0 (StartSessRequestProcessor.java:263)
  to oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$ StartSessTask.doExecute (StartSessRequestProcessor.java:822)
  at oracle.odi.runtime.agent.processor.task.AgentTask.execute(AgentTask.java:123)
  to oracle.odi.runtime.agent.support.DefaultAgentTaskExecutor$ 2.run(DefaultAgentTaskExecutor.java:83)
  at java.lang.Thread.run(Thread.java:662)
  Caused by: java.lang.Exception: ODI-30044: invalid parameter:-file
  at com.sunopsis.dwg.function.SnpsFunctionBase.actionSetParameters(SnpsFunctionBase.java:251)
  at com.sunopsis.dwg.function.SnpsFunctionBase.setParameters(SnpsFunctionBase.java:799)
  at com.sunopsis.dwg.function.SnpsFunctionBase.getCoreOdiTool(SnpsFunctionBase.java:616)
  ... 18 more
  
  and the code is:
  
  "SnpsSqlUnload «-file=F:\temp/data_6001_1001.dat" "-driver oracle.jdbc.OracleDriver =" «-URL=jdbc:oracle:thin:@musty-Pc:1521:XE "-user = system-pass = < @= snpRef.getInfo ("SRC_ENCODED_PASS") @ > - file_format variable = - charset_encoding = UTF8 '-row_sep = \n" "-date_format = YYYY-MM-DD '-fetch_size = 1000 '-field_sep = #
  Select / * + * /.
  
  columns...
  table...
  where (1 = 1)
  
  I have try this - settings file:
  
  F:\data_6001_1001.dat
  F:\test.txt
  C:\Test\test.txt
  C:/data_6001_1001.dat
  C:\test/data_6001_1001.txt
  c:/test/data_6001_1001.txt
  C:\test/data_6001_1001.dat
  
  all of them same result :(
  
  Please help me experts :(

  Hi experts, I have solved my problem :))

  my code like this:

  "SnpsSqlUnload «-file=F:\temp/data_6001_1001.dat" "-driver oracle.jdbc.OracleDriver =" «-URL=jdbc:oracle:thin:@musty-Pc:1521:XE "- user = system-pass =<@=snpRef.getInfo("SRC_ENCODED_PASS") @=""> - file_format variable = - charset_encoding = UTF - 8 '-row_sep = \n" "-date_format = YYYY-MM-DD '-fetch_size = 1000 '-field_sep = #
  Select / * + * /.

  But it's really strange! I change only the file--> FILE and driver---> DRIVER and row_sep--> ROW_SEP and etc...

  I don't know why, but they should be higher. I did on linux OS 64 bit and no mistake.
  But win7 it gave me error.

  I thik it's a bug...

• Setup error CS6, inconsistency in the database of the installer, code output 15

  Hello

  I am trying to install Photoshop CS6 on my new Mac.

  After asking 2%, I get the error message "Setup error CS6, inconsistency in the database of the installer."

  The file of summary shows error code fatal exit 15 and 0 errors/errors/warnings.

  I've seen the other threads in this forum with the same error and I tried the only suggestions here, but so far no luck.

  My Photoshop CS6 is a version downloaded from the Adobe Web page. Everything works fine until the installation begins.

  These are the actions that I have tried:

  1. restart and reinstall

  2 cleaning adobe tool (no result because there was nothing to clean up)

  3. I have disabled the software from my old computer

  4 tried to install it in safe mode

  5. I was contact Adobe support, did not get much support at all. After awhile, I was told to open a discussion in this forum.

  Please help... spent two days on this already.

  Jeff,

  Finally... The problem is resolved.

  I contacted chat support and the person I spoke to connected to my computer and only could find a corrupt file that caused the whole issue.

  Once the file has been deleted, installation could be completed without any problems.

  Thank you for your support.

• Install HA agent on ESXi 3.5u3 failed: ' year error occurred when setting up the HA agent on the host ".

  Hello!

  I of the improperly installed HA agent via vCenter to clean newly installed ESXi 3.5u3. It occurs in about 60% of the process 'Reconfigure for VMware HA': ' year error occurred when setting up the HA agent on the host ". Remote syslogI now have:

  Jan 14 14:19:56 80.251.112.51 pass: 2009-01-14 11:18:44.412 "TaskManager" 49156 info created task: haTask-ha-host - vim.host.NetworkSystem.refresh - 237

  Jan 14 14:19:56 80.251.112.51 spend: 2009-01-14 11:18:44.412 "NetworkProvider" 49156 info update the configuration of the entire network...

  Jan 14 14:19:56 80.251.112.51 pass: 2009-01-14 11:18:44.425 "NetworkProvider" 49156 information updated configuration of the entire network.

  Jan 14 14:19:56 80.251.112.51 pass: 2009-01-14 11:18:44.425 "TaskManager" 49156 info task completed: haTask-ha-host - vim.host.NetworkSystem.refresh - 237

  and no warnings or errors.

  In the list of features HA doesn't speak on the use of HA between the hosts, its all about the components within a single host HA capabilities.  You can cluster VMs on different hosts to VM HA, but not VMware ESXi HA

• 8.1.1.5 Siebel database configuration error.

  Hello people,
  
  Any that have faced this error. I am in the middle of Installation, performed the installation of all servers and got into the configuration step. Now with gateway and started the configuration DB.
  
  I'm stuck at one of the stages of the DB Server Setup Wizard to install the new database. It stops at the step after collecting information ODBC & password from the related screens in the wizard.
  
  
  
  SQLTraceAll SQLTraceAll 4 000000034e3c0768:0          No found DNS
  
  GenericLog GenericInfo 3 000000034e3c0768:0      Can not connect to the database.
  00000:
  
  SQLTraceAll SQLTraceAll 4 000000034e3c0768:0          (SQLDisconnect): Conn 290823880, time: 0 s
  
  SQLConnectOptions disconnect 000000034e3c0768:0 4 (SQLDisconnect): Conn 290823880, time: 0 s
  
  GenericError 1 000000034e3c0768:0 GenericLog          Validation failed: C102: the username / password Combination.00000: cannot be validated at this time.
  
  GenericError 1 000000034e3c0768:0 GenericLog          ValidateFailed database password, error: C102: the username / password Combination.00000: cannot be validated at this time.
  
  
  In SQL server, I have created a database called siebeldb and gave enough space and ran grantuser.sql. So that it can start to create the index and table of siebel. I have an ODBC can connect using windows and server for this DB. (90 compatibility mode)
  
  SQL Server mixed mode authentication.
  
  This is a demo env, have some App, DB (SQL Server 2008 R2) on the same machine, running on OS Windows 2008 server 64-bit
  
  Any help is great!
  
  Thank you
  Kumar

  Kumar,

  I did a quick test and got the same errors when you give a name incorrect odbc for db server config wizard:

  SQLTraceAll SQLTraceAll 4 000000034e3c3f5c:0     2011-08-05 14:25:34 found no DNS
  GenericLog GenericInfo 3 000000034e3c3f5c:0     2011-08-05 14:25:34 cannot connect to the database.
  00000:
  SQLTraceAll SQLTraceAll 4 000000034e3c3f5c:0     2011-08-05 14:25:34 (SQLDisconnect) handful of Conn: 300421960, duration: 0s
  SQLConnectOptions disconnect 000000034e3c3f5c:0 4 2011-08-05 14:25:34 (SQLDisconnect) handful of Conn: 300421960, duration: 0s

  Check the odbc name assistant is the name of odbc created in the start menu > administrative tools > Data Sources (ODBC) > tab system DSN.

  As I did this test in windows2003/sql server 2005, you can make sure you are using Microsoft SQL native connectivity Client 9.0 in addition to compatibility mode set to 9 as indicated in the guide of the SRSP:

  http://download.Oracle.com/docs/CD/E11886_01/V8/core/SRSP_81/SRSP_81_DBPlatforms2.html#wp1019620

  Thank you

  Wilson

• LaserJet P2055dn Setup error

  When installing, I get the error message stating:

  "This software cannot be installed using the command" run as... " ». The installation cannot continue until this is resolved. »

  I am the only administrator of the computer and the only other account. I would like to set up the printer via a network connection. Thank you very much for the help.

  WIV,

  I don't know what process the OS you use so I tried installing on a 64-bit win7. When I downloaded the software of complete solution by default it when right on a Setup screen where I can choose the easy installation or advance of Setup options. I chose the installation easy and let it run and install as usual. If you encounter another, could you explain further, and I will try to help you through it.

  I have you linked to some documents that could be useful and a few screenshots that should help you through this. I also gave you the link to the page of the product that has the driver of the complete solution. You will want to choose the HP LaserJet P2050 post-Euro PCL6 Default Install.

  2055 d Page product - choose this option: HP LaserJet P2050 post-Euro PCL6 Default Install

  Install a driver full features or complete solution on a Windows 7 OS (32-bit and 64-bit) using a USB

  Install a driver full features or the complete solution on a Windows 7 OS (32-bit and 64-bit) through a network

  If you still need help, please post here and let me know what your specific problem.

  Thank you.

• Cannot install on XP Pro SP3: "Service Pack 3 Setup error - the system cannot find the file specified."

  I am trying to install SP3 on my XP Pro.  I get a notice on my screen, stating: "Service Pack 3 Setup error - the system cannot find the file specified."  Don't know what I'd do.  Thank you.  Peter glass

  That's good news. I think you also need to analyze of rootkits being on the right side. So, now:

  Search for rootkits with a program SPECIALLY designed to detect and remove the (aswMBR):

  http://public.avast.com/~Gmerek/aswMBR.htm

  Download this file to your desktop. Double-click the icon to run the program. When the opportunity to download and install the latest Avast definitions do.

  Run a scan. Results in red indicate that this was not a false positive! Do you need to remove the rootkit (including "FixMBR" if necessary).

  And finally, leave your PC on overnight and search for viruses, using this site:
  http://www.eset.com/us/online-scanner/
  Once we are convinced that your PC is clean, here are my instructions (just in case where you still cannot run batch of Geek-Tech file, etc.):

  1. download the installation of SP3 and IE8 (beforehand) files. I prefer to keep these (and other useful files) on a USB key, but this is optional. Here are the links for the installation files:

  http://www.Microsoft.com/download/en/details.aspx?ID=24 (for SP3)

  (You can TOTALLY ignore the message "intended for it professionals"!)

  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=43 (for IE8)

  (You need to install IE8 AFTER SP3! Trust in me.)

  IMPORTANT NOTE!

  It is VERY important to ensure that Internet Explorer is at the level IE6 before installing SP3. In case you have IE7 or IE8, you must uninstall it / them, using the Control Panel Add / Remove programs. Let us know if you need assistance with this.

  Once again:

  Make sure that IE is IE6 level before installing SP3. You can go directly from IE6 to IE8 after SP3 has been installed.

  2. disconnect Internet. Also unplug all unnecessary devices.

  3. temporarily disable the automatic updates. To do this:

  Start | Control Panel (switch to Classic view if not already selected). Automatic updates

  4 set up a clean boot. The last thing you need is for a program that runs in the background to interfere with these updates! (It happens!) For more information:

  http://support.Microsoft.com/kb/310353

  (Note that this is the same as setting up a "Diagnostic boot.")

  Reset.

  5 install the SP3. Restart TWICE.

  6 switch to IE8. Restart TWICE.

  (What happens very often is that someone has their software antivirus running as they try to install SP3, which often translates into chaos! "This is why it must be done after installing SP3 and IE).

  7 unscrew the clean boot. (That is, return to the Normal startup).

  8 make sure that firewall Windows is activated (it should already be):

  Start | Control Panel | Security Center

  9 visit Windows Update to download and install only the critical security updates. Restart each time you are prompted.

  10 re - enable automatic updates.

• Family and dot net framework 3.5 sp1 update Setup error

  Hi all

  my system is windows vista 32 bit sp1.whenever I use windows update to install
  IMP updates dot net framework 3.5 sp1 and update family gives x error 0643.
  After crossing the suggestion given for this error to microsoft, I tried to
  manually install, but it gives error with desc set. and connect you as below. Help, please:

  Description:
  Microsoft .NET Framework 3.5 SP1 has encountered a problem during installation.  Setup did not complete successfully.

  Signature of the problem:
  Problem event name: VisualStudio8Setup
  Signature of the 01:35101 problem
  Signature of the problem 02: 3.5.30729.01_ORCAS_X86_NET
  Signature of the problem 03: CBS
  Signature of the problem 04: INST
  Signature of the problem 05: F
  Signature of the problem 06: gencomp750, {61040379-156d-4ece-b126-ea395a3b2
  Signature of the problem 07: BASERET_UNKNOWN
  Signature of the 08 problem: -.
  Signature of the 09 :-2145124330 problem
  Signature of the problem 10: WUSA
  The system version: 6.0.6001.2.1.0.768.3
  Locale ID: 1033

  More information about the problem:
  LCID: 1033

  Read our privacy statement:
  http://go.Microsoft.com/fwlink/?LinkId=50163&clcid=0x0409

  Error log:
  [06/23/12, 23: 57:04] Microsoft .NET Framework 2.0SP1 (CBS): [2] Failed to fetch of installation file in CBaseComponent::PreInstall()
  [06/23/12, 23: 57:04] setup.exe: ISetupComponent::Pre/Post/Install() [2] failed in ISetupManager::InternalInstallManager() with HRESULT-2147467260.
  [06/23/12, 23: 57:04] setup.exe: CSetupManager::RunInstallPhase() [2] - call to install/Pre/Post for InstallComponents failed
  [06/23/12, 23: 57:04] setup.exe: [2] CSetupManager::RunInstallPhaseAndCheckResults() - RunInstallPhase() returns a NULL piActionResults value
  [06/23/12, 23: 57:04] setup.exe: [2] CSetupManager::RunInstallFromList() - RunInstallPhaseAndCheckResults failed [2]
  [06/23/12, 23: 57:05] setup.exe: [2] ISetupManager::RunInstallLists (IP_PREINSTALL failed in ISetupManager::RunInstallFromThread()
  [06/23/12, 23: 57:05] setup.exe: ISetupManager::RunInstallFromThread() [2] failed in ISetupManager::RunInstall()
  [06/23/12, 23: 57:05] setup.exe: CSetupManager::Run() [2] - call to RunInstall() failed
  [06/23/12, 23: 57:05] WapUI: DepCheck [2] indicates Microsoft .NET Framework 2.0SP1 (CBS) is not installed.
  [06/23/12, 23: 57:05] WapUI: DepCheck [2] indicates Microsoft .NET Framework 3.0SP1 (CBS) was not attempted to be installed.
  [06/23/12, 23: 57:05] WapUI: DepCheck [2] indicates Microsoft .NET Framework 3.5 'package' was not attempted to be installed.
  [06/24/12, 00:23:55] Microsoft .NET Framework 2.0SP1 (CBS): [2] error: Installation for the Microsoft .NET Framework 2.0SP1 (CBS) component failure. MSI returned error-2145124330 code
  [06/24/12, 00:24:11] WapUI: DepCheck [2] indicates Microsoft .NET Framework 2.0SP1 (CBS) is not installed.

  In fact, I have recovery error CTOERROR.flg while installing windows dvd recovery discs and the fix - it asks to restart windows that if I do it asks me to reinstall windows bcz higher error.

  I am manually installingb through the planned introduction in the link that you shared... when I got the above error...

  Have you checked for hard drive failure?

  http://h10025.www1.HP.com/ewfrf/wc/document?LC=en&DLC=en&cc=us&DocName=bph05701&product=12455#N173

  Re: ctoerror.flg

  Incomplete recovery

  One solution was to remove all xxxx and repartition the hard disk

  http://h30434.www3.HP.com/T5/notebook-operating-systems-and/dv4-models-recovery-incomplete-failure-duplicable-problem/m-p/173139

  Order a DVD of Windows Vista SP2

  http://Windows.Microsoft.com/en-us/Windows-Vista/learn-how-to-install-Windows-Vista-Service-Pack-2-SP2

• Unable to Dassault catia v5 Setup error: CXINS.exe not found

  Original title: CXINS.exe not found

  My os is win7 32 bit, and I want to configure Dassault catia v5, when I click on setup, this error all?

  CXINS not raise in C:\Users\...\AppData\Local\Temp\TempDSUnload what should I do: its very important for me to install this software

  Hello

  1. are you able to install other applications?

  I suggest you to try the steps below and check if it helps.

  Method 1: Try to put your computer in a clean boot state, and check to see if the same problem happens.

  By setting your boot system minimum state helps determine if third-party applications or startup items are causing the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135

   

  Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode.

  Follow these steps to reset the computer to start as usual:

  (a) click on start toreduce this top that i, type msconfig.exe in the Start Search box and press ENTER.

  If you are prompted for an administrator password or for confirmation, type your password, or click continue.

  (b) under the general tab, click the Normal startup option, and then click OK.

  (c) when you are prompted to restart the computer, click restart.

  Method 2: Problems installing and uninstalling programs on Windowshttp://support.microsoft.com/kb/2438651 computers

  Method 3: Clear the following temporary folder:
  \AppData\Local\Temp C:\Users\

  Also enable the option Show hidden files

  If the problem persists then I suggest you contact the software publisher.

  http://www.3ds.com/support/

  Hope this information is useful.