When the motherboard must be changed does the PC cabinet to be change simultaneouly must

Similar Questions

• Why Apple does not provide a 10 W charger with the air of the iPad 2 when the barn of the computer and hundreds of people on the web say he needs a 12 W charger because Apple has changed their software and 10 W very slow iPad charges.

  Why Apple does not provide a 10W for I pad air 2 charger when the barn of the computer and hundreds of people on the web say that the 10 W does not work and it takes a 12 W charger.  Burning of the computer told me that Apple has changed their software on the iPad and now requires a 12 W charger.

  So you're claiming Apple is selling iPads with a charger that doesn't work?

  A charger 10W works perfectly well. A 12W charger can be slightly faster to load under certain conditions.

• Network type changes 'Public' and does not return to work when the default gateway is detected

  Original title: Type of network not restored on ethernet cable reconnect.

  I have a Dell Precision R5500 running Windows 7 Professional Service Pack 1. It is connected to a network that is stored as a type of 'work '. When the ethernet cable is removed and replaced network type changes to 'Public' and does not return to work when the default gateway is detected. I also have a Toshiba Tecra M10 running Window 7 Professional Service Pack 1 that initially detects the network restored as 'Public', but 'Work' once again Exchange is a connection to the default gateway. Is there a setting somewhere in the strength of the network to double check its type periodically?

  Hello

  You have any other network assets wireless (specifically) running on the computer?

  Have another active network connection could also cause this.

  Allows us to follow the methods mentioned below and see if they help.

  Method 1: Run the network troubleshooter.

  When the network type gets changed to 'Public' after the cable is disconnected and reconnected. The troubleshooter should let you know if there are errors with the associated services.

  See the following article:

  Using the troubleshooter from network in Windows 7:

  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

  
  Method 2: check if network discovery and file sharing options are enabled in the network and sharing Center.

  See the following steps:

  a. click on start toreduce this top, type network and sharing Center in the Start Search box, and then click network and sharing Center in the programs list.

  b. If network discovery is off, click the arrow to expand the section, click turn on network discoveryand then click apply.

  Reduce this includes this imIf that you are prompted for an administrator password or for confirmation, type your password or click continue.

  c. If file sharing is off, click the arrow to expand the section, click turn on file sharingand then click apply.

  Collapse this includes this ima

  If you are prompted for an administrator password or for confirmation, type your password, or click continue.

  
  Method 3: Uninstall the network drivers and then install the last set of drivers on the manufacturer's Web site and check the issue.

  See the following steps:

  (a) click Start, right click on computer.

  (b) click on properties, click on Device Manager

  (c) expand the network adapter, right click on the adapter option

  (d) click on uninstall

  (e) now go to your computer / site Web of the manufacturer of the device, download the updated drivers and install them.

  Reference:

  Updated a hardware driver that is not working properly:

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

• When I send someone a document I changed if his crossing of the stuff or by adding arrows, when the customer print, it does not show my changes, I'm going through our prices so visitors cannot see and when the customer print them they can see prices?

  When I send someone a document I changed if his crossing of the stuff or by adding arrows, when the customer print, it does not show my changes, I'm going through our prices so visitors cannot see and when the customer print them they can see prices?

  You probably use drawing markup tools. There are options to print with or without annotations. You can not change this.

  If you don't want them to see the prices, either remove the original document and recreate the pdf without them there or you can use the redaction tools in the full paid for version of Adobe Acrobat Pro.

• The selection list value does not change when the page is sent

  Hi all
  
  I have a selection list that acts as an entry for the report. the page is submitted using a button.
  The button uses the branch option "redirecting to page in the application. I select the same page.
  
  The problem is when I change other values in the value list always takes the first value
  
  I want to know if the problem is with the key or select list. What should I do about it?
  
  Concerning
  REDA

  Renon wrote:

  I tried your suggestion. Now that I ask, is the report is expected to show only when the button request is passed. I read to present the action of page the name of the button acts as a request.
  so now my report status is request = Expression1 and value of expression1 takes GO tell button name.

  The report does not appear but. I checked the session. It has the value of the selection list and the page is submitted as but the report is not displayed.

  ASK is disabled before the exposure treatment page unless it is set in a branch or a URL, this is why it has no value when they are referenced in your State in the region.

  Set the attribute request in your branch for & request to make available at the course to see the page the current value of the demand for treatment.

• ENVY 15 t-j000 quad edition cto: outputs audio switching does not work in windows 10 birthday when the headset is connected

  Hi guys.

  As you know in 10 anniversary update windows, you can switch between outputs sound when the headphone is plugged directly from the sound icon in the taskbar, but it does not work as it should. If the headset is unplugged then the sound comes from the speakers and they are plugged in when the noise is coming from the headset and I can't select speakers. It shows two devices, but when I select one of them the speakers are selected. Also I tried to playback devices, but still, I can't put the headset as default playback device. She is forced to be like the only communication device. I've updated the audio driver but nothing has not improved. My audio driver is codec IDT high-definition. In addition, I tried the generic driver from the sound of microsoft, which is called "codec high definition audio" and it shows a device like speaker and it doesn't detect any helmet or communication device. So, what's the problem? I am able to use this option of windows 10 birthday or not? If yes how? I need this option because I use a headset a lot and I don't want to plug them each time. Thank you for your attention. I can give additional information if it is needed and I'm hear to help.

  Hi David,

  If you remember, I had problem with the IDT driver after upgrade to windows 10 and other updates. I'll be back to tell you good news. Finally, I solved the problem partially and I'll explain what I did.

  Today, I found that there is some audio drivers in the microsoft catalog site, so I went out there and looked for a codec high definition audio. A list came and saw that there are three tempo IDT Audio driver that are compatible with windows 10. They are all IDT Audio driver version 6.10.6504.0 and they are made in 2015. I downloaded all the drivers of three and tested. The first two of them does not solve my problem but the last which is "Tempo driver update for codec IDT high-definition" made in 08/05/2015 with 13.1 MB did the job. I must mention that you need to install this driver on generic windows sound driver for good results. If you install hp IDT drivers probably do not get good results. After installing this driver now I am able to switch between outputs audio (headphones and loudspeakers). The driver can detect my headset exactly as what it is. He shows me an output until I plug in my headphones and it then adds another exit in the helmet. I put my headphones or internal speakers as default playback device which I couldn't do with other drivers. There are just two problems that does not matter much to me, and I can't ignore them. The first is the light of the button mute on the keyboard does not work with this driver which is not very important, and the second is that there is no Equalization of beats in this driver and instead there is an audio driver IDT, which is very similar to the equalizer, but it beats not affect only the internal speakers the headphones that is more important to me because the sound via the headphones is very clear and good. If there was some ablity to HP to change this driver and add audio beats and allow also the light on the button mute then it would be perfect. The link for this driver is here:

  Driver IDT tempo for windows 10 and put on subsequent day

  Just download the latest driver with 13.1 MB size and enjoy.

• Repeat the questions of character: will not repeat when maintained key (even after change of repeat speed & delay at the fastest)

  When I type characters (as well as the arrow keys and backspace) etc they will not repeat when the button is kept pressed and you must wait a few seconds before being able to repeat a character or go back and delete a mistake!  This has been a problem since I accidentally leaned on a button and he kept extensible - a message box emerged by asking (I don't remember verbatum what he said) if I wanted to stop this does not happen - and in my drowsy State, I felt just OK!  I disappeared in the 'control panel' and changed the character of repetition and time short and fast many times and it never changes nothing!  I noticed that when I connect to my computer the character repeat works normally.  I'd appreciate any help because it is frustrating and annoying say the least!  Thank you, Danette

  Hello

  1. have you made changes on the computer recently?

   
  Please check if you face the same problem when recording in safe mode. It is a possibility that one of the non-Microsoft application or driver is causing this issue.
   
  Step 1.
  a. restart your computer.
  b. when the computer starts, you will see your computer hardware are listed. When you see this information tap the F8 on your keyboard key repeatedly until you are presented with the screen Windows 7 Advanced Startup Options.
  c. using the arrow keys, select the desired option of Mode without failure.
  d. press the Enter key on your keyboard to start in safe mode of Windows 7.
  e. when Windows starts, you will be at a typical logon screen. Connect to your computer and Windows 7 goes into safe mode.
  f. do whatever tasks you need and when you are done, reboot to return to normal mode.
   
  Step 2.
  If it works fine in safe mode try performing a clean boot in order to find the cause root.
  See the article below for instructions on how to start your computer in a clean boot state.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: When the diagnosis is complete, don't forget to reset your computer to normal startup. Follow step 7 in the above article.
   
   
  I hope this helps.

• RMAN duplicate grave crashes when I'm trying to change the paths of the destination

  Hello community,

  I am trying to duplicate a database of PROD for a test environment using the basic backup technique. I test the script in double and everything works fine when the paths of the database "auxiliary" (the database that I am creating) have the same paths as the basis of the 'target' (the database of production). If I change the paths, the double has failed because it does not find a backup of controlfile:

  channel ch1: from the restore backup set data file

  channel ch1: restore the control file

  channel ch1: reading of the backup piece PROD_cf_c-2175092736-20151204-0 c

  channel ch1: ORA-19870: error when restoring backup piece PROD_cf_c-2175092736-20151204-0 c

  «"ORA-19507: failed to retrieve the sequential file, handle ="PROD_cf_c-2175092736-20151204-0 c", parms ="»

  ORA-27029: skgfrtrv: sbtrestore returned error

  ORA-19511: error received from layer media manager, error text:

  < PROD_cf_c-2175092736-20151204-0 c > backup file not found in the NetBackup catalog

  This is the script that works, but if I have the same structure of directories in PROD and TEST (but this isn't a real scenario):

  run

  {

  allocate auxiliary channel ch1 device type sbt;

  Send "NB_ORA_CLIENT = xxx NB_ORA_POLICY = xxx, NB_ORA_SCHED = Full_Diario';"

  duplicate database for TEST PROD

  until 'sysdate-2/24.

  NOFILENAMECHECK;

  output channel ch1.

  }

  
  

  And this is the script that it does not work because I have the PROD and TEST different directory structure
  

  run

  {

  allocate auxiliary channel ch1 device type sbt;

  Send "NB_ORA_CLIENT = xxx NB_ORA_POLICY = xxx, NB_ORA_SCHED = Full_Diario';"

  duplicate database for TEST PROD

  until 'sysdate-2/24.

  SPFile

  control_files value ' / TEST/orabd1/ctl/control_PROD_01.ctl','/TEST/oralog1/ctl/control_PROD_02.ctl','/TEST/oralog2/ctl/control_PROD_03.ctl '

  db_file_name_convert value "/ PROD /", "/ TEST / '.

  the value log_file_name_convert "/ PROD /", "/ TEST / '.

  core_dump_dest value "/ TEST/oralog1/cdump".

  the value 'TEST' db_name

  Set diagnostic_dest ' /TEST/oralog2'

  instance_name must bring 'TEST'.

  all local_listener 'LISTENER_TEST '.

  Set log_archive_dest_1 ' LOCATION = / TEST/arch.

  the value of log_archive_dest_2 'LOCATION = NULL'

  ;

  output channel ch1.

  }
  
  

  I tried to restore a Netbackup file and it works. I try to duplicate a database when the structures of directories are identical and it works. Why it's a failure when I change the destination paths?

  Thank you!

  Marina.

  Hello

  We had a similar problem in our shop. In our case, that we never knew if she was related to Oracle or NetBackup, but we found a Bug of Oracle, so we think it was a problem with the Oracle.

  Bug 11783792  RMAN SEND command does not hold the value of the variable

  DOC - ID 11783792.8

  
  

  Rather than send 'NB_ORA_CLIENT = DCLI, NB_ORA_POLICY is BD_DC_2, NB_ORA_SCHED = Full_Diario';.

  try something like this:

  Run {}

  allocate channels ch01 type 'sbt_tape' PARMS 'ENV =(NB_ORA_CLIENT=DCLI) ";

  Send "NB_ORA_SERV =';"

  Restore settings

  output channel ch01.

  }

  Let me know if it helps.

  Kind regards

  Ferran

• Hello! I have a problem with the change of the method of payment. PMT_000008 error, when I'm trying to change the method of payment. Help, please!

  PMT_000008 error, when I'm trying to change the method of payment. Help, please! Cookies are cleaned, tried different browsers. It does not help.

  Since this is an open forum, not Adobe support... you must contact Adobe personnel to help

  Chat/phone: Mon - Fri 05:00-19:00 (US Pacific Time)<=== note="" days="" and="">

  Don't forget to stay signed with your Adobe ID before accessing the link below

  Creative cloud support (all creative cloud customer service problems)

  http://helpx.Adobe.com/x-productkb/global/service-CCM.html

• How to trigger a refresh of a drop-down list when the selection is changed

  Hello

  This is a general question of ExtendScript, but since I work with FM, I'll ask here first. I have a bit of a paradox here and I'm not sure of the best way to manage it.

  I have a dialog box with a drop-down list, where I want to refresh some controls when the user changes the selection in the list (dropdownList.onChange). This includes them refresh the content of the list itself. However, the problem is, whenever I try to update the content of the list, onChange triggers again. So, if I put the call to update box in the onChange handler, it will result an infinite loop, because my upgrade function fires onChange when it refreshes the list.

  Does anyone know a better methodology, where I can safely triggers a refresh of a drop-down list in the list's onChange event handler? I really wish that onChange was reserved for an action of the user only, or at least there is a property for this purpose.

  Russ

  Hi Fabio,.

  You can't "Refresh" a menu drop-down.

  But you can rebuild.

  You must do it "manually".

  As I do:

  1. I have a picture I want to show in the dropdownlist control.

  2. I have delete all children: myList.removeAll ();

  3 I have rebuild the list via mylist.add ("item", "myArray [index] in a for - loop.

  But if you know the exact position of the elements to remove or add, you can do so via splice()

• The server reboots required when the data source is changed?

  Whenever I create a new Data Source, or change the Source of existing data from the server asks for the restart after clicking on the button "activate changes. Is it necessary every time when the DS is changed?
  
  Can someone clear my doubt as soon as POSSIBLE.
  
  Thanks in advance.
  
  -Prasad

  Hello

  I think it must refer to a particular data source restart not restarting the server. What that does show when you click on reboots and view changes in the upper left corner of the Weblogic console.

  Kind regards
  Neeraj Sehgal

• How insert/DML data in the table when the data in the related table changes

  Hello guys!
  
  I came across a problem that I need to get fixed. Because I don't know how to start and get it resolved I wanted to ask you for your expertise.
  
  The scenario is as follows:
  
  I have a table 'a' in my 10g database and a view "ab" which combined table 'a' with 'b' table in a view. However, the 'b' table is a table in another schema Manager database. and accessible (read only right) via a database link.
  
  Now here it is: whenever the data changes in table "b", for example 2 new sets of data is inserted, I need to insert automatically the 2 values of these 2 sets of data in my table "a". Same procedure for update and delete in table "b".
  
  The action that inserts data into the table 'a' must be initialized in my database, I have limited access to the other. Can I somehow use a trigger my reviews of "ab" to insert data into the table "a"? Or is it possible to use the "change notification procedure database" using the view as the reference?
  
  Desperately need help and example of all suspicion/code greatly appreciated. I am very new to Oracle and not very fond of PL/SQL routines. So please be so kind as to give me more details.
  
  Thanks in advance - I hope you have any ideas how I can get this problem resolved.
  
  Sebastian

  >

  ... it does not, since the DDL operations are not permitted on the remote databases (ORA-02021). I can't create the trigger on a view either. :-(
  So what ways are left to insert data into the table 'a' when the related table changes?

  Please, help if you have an idea!

  Yes,
  You can't perform the DDL (create the trigger...) on remote databases as you can see...
  Try to create this trigger in the local database that will make DML (insert into...) on the remote database.

      CREATE OR REPLACE TRIGGER local_forward_pt_after_insert
       AFTER INSERT
           ON N2K_INV_PT
           FOR EACH ROW
  
       BEGIN
           -- Insert records into table "a"
           INSERT INTO TBL_PUNKTDATEN@remote_database_sid
            ( INT_NUMMER,
              STR_GEBIET
               )
           VALUES
            ( :new.INT_INV_PT_NR,
              :new.GEBIET );
       END;
  

  Thank you

  Good luck

• When the perforation in the logic does not record pre

  Using logic 10.2.4

  I have implemented punch and punch the locators.  I play with the track and making punch.  Logic doesn't store any roll before... .in other words if I try to expand the newly created region a little more early to catch a truck or something thing I got at the beginning, nothing is there.  I know logic is supposed to check in at the beginning just in case... there at - it a setting I'm missing? I tried the pre roll record and set at 6 seconds, but still nothing at start is saved before punch to the point.  Same thing in lieu or in creating records of decision-making.

  

  The count and record Pre Roll above are mutually exclusive. They do not define how at the beginning of the recording begins, but rather where the playhead is set before the start of the recording. If you have a 2 count together bar and position the playhead at 10 bar, and then tap Save. Logic moves the playhead at bar 8, start playback (if there is something to play) and begin to check in at 10 bar. If you select a period of prefetching in a few seconds, the playhead will jump back 6 seconds instead of bars. Neither defines the amount of pre-roll advertising in the in the recorded real audio.

  Auto Punch in is exactly that. When the recording start / stop. There is no registered pre-roll advertising. If you want the extra recording time before or after, then stretch the autopunch bar to make room for the start of start or end at the end.

  You can also use take folders that might be a suitable replacement and allowing campers of any part you want.

  Exception to this rule the there is one and will achieve exactly what you want - but it does not work with automatic punch. It is the punch on the fly...

  prerequisites - you must have "quick fist blow" activated.

  Press play and internally logical starts recording the moment where you press play, when you're ready to punch in, press R and you start recording, when finished, press stop. Logic recorded a region between the points where you started recording and click on stop. However, logic actually starts recording (under the hood) from the moment where you supported the play button, so if you look in the project tree, you can see the entire audio region with only set it collecting points as the region.

  It's only this case that allows you to develop the region in time to include a part any audio region that was "pre" set registration points. It is in fact will contain the entire audio file as soon as the room was pressed to stop, even with quick punch point defined further in the song.

  So say you have 10 bars - you start reading at the bar 1 and 5 bar you quick punch in bar 7 and you punch out. The defined region will show 5-7 bars, however if you develop the starting point of audio regions to the left - you will find that you have saved in fact all the way back to bar 1.

  Sorry, this feature is not available if the autopunch is the method of choice.

• When a tab is opened, it does not overlap the screen im on.

  So when I like to open another tab when I click a button, it does not overlap the screen, I'm on and if I click it, nothing happens, so I have to minimize and press tab to open it and when I click on the tab I am the last, it works fine but the other tab is not.

  It seems that your browser runs slowly due to lack of memory (why a new loading tab so seems to freeze and can be thawed by minimize and maximize). This explains also why you can change to the previous tab, but not others; the last tab you used is still in main memory, while the other tabs should return loaded into main memory when you change their (as other data takes the place of the main memory).

  So I suggest you try to restart Firefox (as some may have memory leaks) and closing other applications you have open (use the Task Manager to help if they are slow to respond). If you're still having problems, try closing using the tabs/windows less.

  If you still have the problem, then you should try reinstalling Firefox (see uninstallation and installation).

• Why my GPS stopped suddenly when the location and the surroundings have not changed work?

  Why my GPS stopped suddenly when the location, a framework and the weather conditions have not changed work?

  Ros

  iPhone 4S OS 9.2.1

  Have you ever tried to force reboot the phone by holding down the button sleep and home for 10 seconds, until the Apple logo comes back again? You won't lose data by doing this, but it can cure a few glitches.

  If this does not work and to rule out a software problem, set it back to factory settings, without using any data backup later. Test the phone and if the GPS works again, restore the backup.

  If the GPS does not work after the factory reset, it is a hardware problem, and Apple has to repair the phone if GPS can be fixed.

  In the case where it cannot be resolved, it could offer to replace the iPhone 4s, if you are willing to pay the price for the refurbished phone.

  Out of warranty repair service

  If your repair is not covered by Apple limited one-year AppleCare warranty + or AppleCare Protection Plan, your iPhone may be eligible for out-of-warranty service. For example, the liquid damage is not covered by the warranty, but may be eligible for out-of-warranty service. Some damage is not eligible, for example, if your device has been broken into several pieces. See the terms of repair of Apple and Conditions for more details.
  Read the terms of Apple repair

  Model	Out-of-warranty service fee	Battery service *
  iPhone 6 s more, iPhone 6 Plus	$329	$79 * available only if battery Apple diagnostic test failure
  iPhone iPhone 6s 6	$299
  iPhone 5, iPhone 5, iPhone 5	$269
  iPhone 4S	$199
  iPhone 4, iPhone 3GS, iPhone 3G	$149

  In addition, a $6.95 shipping charges if necessary. Fees are in US Dollars and exclude tax. The price is for the service through Apple. The final service charge we charge will be determined during the tests and may be less than the costs of service above. Pricing and terms vary for the service by an Apple authorized service provider.

  copied from: answer Service Center - iPhone