When windows updates the computer I cnan can't connect you

Similar Questions

• When windows update, the restart may end, it says please wait and won't restart unless I closed it and open it in safe mode, what can I do?

  When windows update, the restart may end, it says please wait and do not restart unless I closed it and open it in safe mode, what can I do?

  Hello

  1st thing to try is a restoration of the system in safe mode

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If that does not read this information

  the link below is how to download and get a vista disk startup repair, which you can start from the

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

  It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

  Change boot order it do dvd drive 1st in the boot order

  http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/

  If the problem continues to repost in the correct windows update forum

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update?page=1&tab=all

• My hard drive crashed and I lost Adobe Acrobat, who had been installed by Dell, when I bought the computer? How can I reinstall Adobe Acrobat.

  My hard drive crashed and I lost Adobe Acrobat, which was preinstalled by Dell, when I bought the computer.  How can I reinstall Adobe Acrobat?

  Hey Stan,

  Please see the following link for download Acrobat.

  https://helpx.Adobe.com/Acrobat/KB/Acrobat-downloads.html

  You can it by entering your Adobe credentials if it was a subscription or license by typing the serial number if it was a perpetual version.

  Concerning

  Sukrit diallo

• When you click "Restart now" after Windows Update, the computer stops, does not restart

  When you click "Restart now" to a windows update... the computer cycle throughout the judgment... and not restart.

  * original title - problems with computer restart (ing) after the updates *.

  Hello

  1st thing to try is a restoration of the system in safe mode

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If that does not read this information

  the link below is how to download and get a vista disk startup repair, which you can start from the

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

  It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

  Change boot order it do dvd drive 1st in the boot order

  http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/

• I changed the name of the computer, now I can not connect to Oracle SQL Developer

  Hello my friends!
  
  Everything worked perfectly until I needed to change the name of the computer and now I can no longer connect in Oracle SQL Developer 3.1.
  I restarted Oracle 11 g by stopping and restarting. The order message said stop and start successfully. This tells me Oracle 11 g Express is running, but I can no longer
  connect to Oracle SQL Developer 3.1.
  
  How can I fix?
  
  Thank you all!

  J man,

  I'm not a pro at Oracle XE, but I would say that this is not a problem of SQL * Developer, but the listener of OracleXE.
  Now, I'm in total guessing game mode:
  find the "listener.ora" file in your Oracle installation (from [url http://docs.oracle.com/cd/E17781_01/server.112/e18804/network.htm#ADMQS168] this document is c:\oraclexe\app\oracle\product\11.2.0\server\NETWORK\ADMIN\listener.ora
  I'm sure that it is coded in the old hostname, simply replace it with the new host name.
  Restart your receiver and please try to connect again.

  HTH,
  Berx

• in my windows xp desktop computer that I can't connect to wifi on the 4th floor looking for the LAN or high speed internet?

  Wen I go on STAGE LAN/HAUTE SPEED INTERNET

  IT HAS 2 TILES:

  1394 CONNECTION

  CONNECTED, FIREWALL

  13934 NET ADAPTER

  AND

  CONNECTION TO THE LOCAL NETWORK

  NETWORK CABLE UNPLUGGED, FIRE...

  REALTEK RTL9138 family PC if...

  HELP PLZ... NO GUD WIV COMPUTERS... FOR IM A TEENAGER! Help! KEEP THE ANWSER PLEASE ENOUGH BASIC XXX

  Hi Irim,

  1. What is the brand and model of your computer?

  2. What do you mean by "unable to connect to WIFI on the 4th floor?

  3. it worked earlier?

  I suggest you to see link and check if it helps.

  Windows wireless and wired network connection problems

• You can load the update of windows on the computer and then one more

  You can load the update of windows on the computer and then one more

  You can load Windows * updates on multiple computers. Should not be confused with * updates *. TaurArian [MVP] 2005-2010 - Update Services

• I use Windows XP Home Edition. It takes awhile to start when I turn on the computer. How can I speed up this process?

  I use windows XP Home Edition. It takes awhile to start when I turn on the computer. How can I speed up this process?

  original title: slow start
  • Faster processor.
  • Fastest hard drive.
  • Faster or more RAM/memory.
  • Less things loading at startup.
  • Appropriate and the most recent hardware device drivers.

  In XP, you can cleanup and optimize it in some way, by using the following tips:

  Search for malware:

  Download, install, execute, update and perform analyses complete system with the two following applications:

  • MalwareBytes (FREE)
  • SuperAntiSpyware (FREE)

  Remove anything they find.  Reboot when necessary.  (You can uninstall one or both when finished.)

  Search online with eSet Online Scanner.

  The less you have to run all the time, most things you want to run will perform:

  Use Autoruns to understand this all starts when your computer's / when you log in.  Look for whatever it is you do not know using Google (or ask here.)  You can hopefully figure out if there are things from when your computer does (or connect) you don't not need and then configure them (through their own built-in mechanisms is the preferred method) so they do not - start using your resources without reason.

  You can download and use Process Explorer to see exactly what is taking your time processor/CPU and memory.  This can help you to identify applications that you might want to consider alternatives for and get rid of all together.

  Do a house cleaning and the dust of this hard drive:

  You can free up disk space (will also help get rid of the things that you do not use) through the following steps:

  Windows XP should take between 4.5 and 9 GB * with * an Office suite, editing Photo software, alternative Internet browser (s), various Internet plugins and a host of other things installed.

  If you are comfortable with the stability of your system, you can delete the uninstall of patches which has installed Windows XP...
  http://www3.TELUS.NET/dandemar/spack.htm
  (Especially of interest here - #4)
  (Variant: http://www.dougknox.com/xp/utils/xp_hotfix_backup.htm )

  You can run disk - integrated into Windows XP - cleanup to erase everything except your last restore point and yet more 'free '... files cleaning

  How to use disk cleanup
  http://support.Microsoft.com/kb/310312

  You can disable hibernation if it is enabled and you do not...

  When you Hibernate your computer, Windows saves the contents of the system memory in the hiberfil.sys file. As a result, the size of the hiberfil.sys file will always be equal to the amount of physical memory in your system. If you don't use the Hibernate feature and want to reclaim the space used by Windows for the hiberfil.sys file, perform the following steps:

  -Start the Control Panel Power Options applet (go to start, settings, Control Panel, and then click Power Options).
  -Select the Hibernate tab, uncheck "Activate the hibernation", and then click OK. Although you might think otherwise, selecting never under "Hibernate" option on the power management tab does not delete the hiberfil.sys file.
  -Windows remove the "Hibernate" option on the power management tab and delete the hiberfil.sys file.

  You can control the amount of space your system restore can use...

  1. Click Start, right click my computer and then click Properties.
  2. click on the System Restore tab.
  3. highlight one of your readers (or C: If you only) and click on the button "settings".
  4 change the percentage of disk space you want to allow... I suggest moving the slider until you have about 1 GB (1024 MB or close to that...)
  5. click on OK. Then click OK again.

  You can control the amount of space used may or may not temporary Internet files...

  Empty the temporary Internet files and reduce the size, that it stores a size between 64 MB and 128 MB...

  -Open a copy of Microsoft Internet Explorer.
  -Select TOOLS - Internet Options.
  -On the general tab in the section 'Temporary Internet files', follow these steps:
  -Click on 'Delete the Cookies' (click OK)
  -Click on "Settings" and change the "amount of disk space to use: ' something between 64 MB and 128 MB. (There may be many more now.)
  -Click OK.
  -Click on 'Delete files', then select "Delete all offline content" (the box), and then click OK. (If you had a LOT, it can take 2 to 10 minutes or more).
  -Once it's done, click OK, close Internet Explorer, open Internet Explorer.

  You can use an application that scans your system for the log files and temporary files and use it to get rid of those who:

  CCleaner (free!)
  http://www.CCleaner.com/
  (just disk cleanup - do not play with the part of the registry for the moment)

  Other ways to free up space...

  SequoiaView
  http://www.win.Tue.nl/SequoiaView/

  JDiskReport
  http://www.jgoodies.com/freeware/JDiskReport/index.html

  Those who can help you discover visually where all space is used.  Then, you can determine what to do.

  After that - you want to check any physical errors and fix everything for efficient access"

  CHKDSK
  How to scan your disks for errors* will take time and a reboot.

  Defragment
  How to defragment your hard drives* will take time

  Cleaning the components of update on your Windows XP computer

  While probably not 100% necessary-, it is probably a good idea at this time to ensure that you continue to get the updates you need.  This will help you ensure that your system update is ready to do it for you.

  Download and run the MSRT tool manually:
  http://www.Microsoft.com/security/malwareremove/default.mspx
  (Ignore the details and download the tool to download and save to your desktop, run it.)

  Reset.

  Download/install the latest program Windows installation (for your operating system):
  (Windows XP 32-bit: WindowsXP-KB942288-v3 - x 86 .exe )
  (Download and save it to your desktop, run it.)

  Reset.

  and...

  Download the latest version of Windows Update (x 86) agent here:
  http://go.Microsoft.com/fwlink/?LinkId=91237
  ... and save it to the root of your C:\ drive. After you register on the root of the C:\ drive, follow these steps:

  Close all Internet Explorer Windows and other applications.

  AutoScan--> RUN and type:
  %SystemDrive%\windowsupdateagent30-x86.exe /WUFORCE
  --> Click OK.

  (If asked, select 'Run'). --> Click on NEXT--> select 'I agree' and click NEXT--> where he completed the installation, click "Finish"...

  Reset.

  Now reset your Windows with this FixIt components update (you * NOT * use the aggressive version):
  How to reset the Windows Update components?

  Reset.

  Now that your system is generally free of malicious software (assuming you have an AntiVirus application), you've cleaned the "additional applications" that could be running and picking up your precious memory and the processor, you have authorized out of valuable and makes disk space as there are no problems with the drive itself and your Windows Update components are up-to-date and should work fine - there is another thing you pouvez wish to make:

  Get and install the hardware device last drivers for your system hardware/system manufacturers support and/or download web site.

  If you want, come back and let us know a bit more information on your system - particularly the brand / model of the system, you have - and maybe someone here can guide you to the place s x of law to this end.  This isn't 100% necessary - but I'd be willing to bet that you would gain some performance and features in making this part.

• When windows update (KB968930) power Shell2.0 and WinRm20 for win Vista tries to install the thugs of the computer then restarts and crashes again and again

  • When windows update (KB968930) power Shell2.0 and WinRm20 for win Vista tries to install the thugs of the computer then restarts and crashes again and again

  Hello LisaQuaranto,

  I suggest that you configure the computer to start in minimum mode, download the update from the Download Center and try to install the update.

  To perform a clean boot on a computer that is running Windows Vista:

  a. Click Start, type msconfig in the search box and press ENTER.

  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

  b. on the general tab, click Selective startup.

  c. under Selective startup, clear the check box load startup items.

  d. click OK.

  e. When prompted, click on restart.

  f. after the computer starts, check if the problem is resolved.

  If your problem is resolved after the clean boot, and then follow the steps in the following article to narrow down the exact source:

  http://support.Microsoft.com/kb/929135

  In addition, refer to the section on how to restore your computer to a Normal startup mode by following the steps under "Reset the computer to start as usual", after performing the clean boot troubleshooting.

  You can download the update following the link below:

  http://support.Microsoft.com/kb/968930

  Thank you
  Irfan H, Engineer Support Microsoft Answers

• HP LaserJet 6MP: Windows updated my computer last night, now my 6MP HPLaserJer does not work and I can't get the driver

  After windows updated my computer, my laserjet6MP will not print.  When I click on print, an error message appears indicating that there is an error in printing.  When I checked for error it says there is a job prevents printing to the printer, but there is no jobs in the queue.

  I recently put my computer Setup initial because a hacker stuck to the top of my use of the computer.

  I have not all printers working, but now after update it does not print.  I love this printer and do not give it up.

  If the printer is connected with a parallel cable to the printer to the computer (usb adapter no) go into the Device Manager and click ports, and then click the lpt port that the printer is attached.  Change the default checkmark do not use an interruption for the last item to use any available interruption.  Also the legacy box downstairs.  Save the settings and the printer should work now.

• When turned on the computer it says - Error loading C:\WINDOWS\aluzonah.dll - the specific module could not be found

  When turned on the computer it says - Error loading C:\WINDOWS\aluzonah.dll - specific module is not found - the computer seems to work very well however.

  When turned on the computer it says - Error loading C:\WINDOWS\aluzonah.dll - specific module is not found - the computer seems to work very well however.

  A Google search for this returned no success other than your own message.  This suggests that the file refers to malicious software.

  You have a recent version of an antivirus with a current subscription application?  Have never leave you the subscription expires?

  Startup like these messages can occur if your antimalware application has deleted the payload real malware but has failed to clean up the start of the call.

  First download, install, update and run the following applications of malware free 2 the possibility that one or the other will detect and remove these remains (as well as anything else that your original scan could not detect):

  Malwarebytes

  SUPERAntiSpyware

  If these two applications running is not the message disappears, you will need to know where the call to the missing dll file is now done.  The best tool for this is AutoRuns:http://technet.microsoft.com/en-us/sysinternals/bb963902.aspx the main problem with the help of AutoRuns is that he finds the startup items as much as it can be a little overwhelming. One of the good features of AutoRuns is that you can prevent an element of commissioning by unchecking the box, but if you decide that you really want to start, just re-check the box.  Once you are sure that you will never need of the item to start, remove it.

  Typical advice is to check the logon tab, but because the now-absent file is a dll, it is not likely to appear online in the logon tab.  Yet, take a look at the connection tab and if aluzonah.dll is there, or if there is a line of starting an application of suspect search, a Google search suggests is malware, uncheck the box and restart.  If the entry is far, re - run AutoRuns and remove the line.

  The next place to look is the Winlogon tab, which should have little, or no, entries.

  If you have not yet found the wrong entry, click the all tab, click the top row and then click on file > find and search for aluzonah.dll.  If you find an instance, uncheck the box and then manually move the selection on the following bottom line then press F3 to "search again".

• evreytime, I opened the windows update the sistem says that the service is not runing what can do?

  I have a windows Vista Home Basic in my pc, so I can't update it cause when I click search for updates, it says windows cannot check the updates because the service is not running

  Hi joselizama,

  1. Did you the latest changes on the computer?
  2. What is the full error message that you receive?
  3. You have security software installed on the computer?
  4. When was the last time it was working fine?

  Method 1

  I suggest that you restart all services related to Windows update and check later if you can install the updates of Windows on the computer.

  To restart services required by Windows Update

  You must be logged on as administrator to perform these steps.

  1. Open administrative tools by clicking the Start button, click Control Panel, clicking system and Maintenance, and then clicking Administrative Tools.
  2. Double-click Services. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  3. In the Services window, double-click in the Background Intelligent Transfer Service.
  4. Under the tab general , under Startup type, click Manual, and then click apply.
  5. Click the connection tab and make sure that the service is enabled in every hardware profile listed.
  6. Click the general tab, click Start, and then click OK. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  7. In the Services window, double-click Windows event log.
  8. Under the tab general , next to Startup type, make sure that Automatic is selected.
  9. Next to Service status, check whether the service is started. If not, click Start, and then click OK. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  10. In the Services window, double-click the Windows Update service.
  11. Under the tab general , next to Startup type, make sure that Automatic is selected.
  12. Next to Service status, check if the drive is listed. If not, click Start, and then click OK. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  13. In the Services window, double-click software licensing.
  14. Under the tab general , next to Startup type, make sure that Automatic is selected.
  15. Next to Service status, check if the drive is listed. If not, click Start, and then click OK. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  16. Close the Services window and try to install Windows updates again.

  Method 2

  If the previous step fails then I would suggest that reset you the default Windows Update components and later try to install updates.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

• Windows vista and the problem with the window updates more computer or mouse freezes

  I have window vista system.

  Impossible to update versions of window

  mouse/computer frequent freezing problem

  have installed McAfee total protection

  Hi DilipAssar,

  ·         What happens when you try to run windows update?

  ·         You receive an error message/code?

  ·         Did you the latest changes on the computer?

  ·         How long have you been experiencing this problem?

  ·         What exactly is the computer or the mouse gel?

  Search for the error message for the updates that have failed to be updated.

  To check the update fails, follow the steps:

  Click Start > all programs > windows update > view update history

  I suggest you try the methods mentioned below and check if it helps.

  Method 1: Put the computer in a clean boot State before proceeding with the installation of windows update.

  Note: After installing windows update, follow step 7 in the link provided to return the computer to a Normal startupmode.

  Method 2: Temporarily disable the security software.

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 3: Reset the Windows Update components.

  http://support.Microsoft.com/kb/971058

  You can also manually install the update (numbers KB) by downloading from the Microsoft Download Center.

  http://www.Microsoft.com/downloads/en/default.aspx

  Reference: http://windows.microsoft.com/en-US/windows-vista/Ways-to-improve-your-computers-performance

  http://www.Microsoft.com/athome/Setup/optimize.aspx

• the "uncdms.dll" error when I restart my computer. How can I fix?

  the "uncdms.dll" error when I restart my computer. How can I fix?

  The file belongs to the software Windows Desktop Search. If you use it, you can uninstall it from Add/Remove programs. If you use it (even if I think it's pretty awful), uninstall and then reinstall. MS - MVP - Elephant Boy computers - don't panic!

• When I cut the computer on I have to press ctrl, ALT, DELETE. I'm not sure what I did. Does one know how I can uninstall client services netware fot or a way to solve this problem?

  loging on

  When I cut the computer on I have to press ctrl, ALT, DELETE. I'm not sure what I did. None knows how I can uninstall the client services fot netware or a way to solve this problem thanks, Im using Microsoft Windows XP Professional Version: 5.1.2600

  When I cut the computer on I have to press ctrl, ALT, DELETE. I'm not sure what I did. None knows how I can uninstall the client services fot netware or a way to solve this problem thanks, Im using Microsoft Windows XP Professional Version: 5.1.2600

  It is normal and safe... Do you mean that you have not always press CTRL + ALT + DELETE to log on?

  If you * want * automatic login?

  • How to turn on automatic logon in Windows XP
  • How to enable or disable the CTRL + ALT + DELETE sequence for logging on Windows XP and Windows Vista, Windows 7