When you restore the backup files in Vista, get error "the parameter is incorrect."
I reinstalled my windows vista cd and all my files was erected to another area of my computer for the back, but I don't know how to restore them for use on my laptop. How to restore my stored backup files? It's there, but there are errors such as (the parameter is incorrect)
Hello
"and all my files was erected to another area of my computer to school."
do you have you will actually cost the files yourself or did it do for you through the recovery process
If this has been done by the recovery of computer manufacturers as part of the resettlement process, you will need to contact the manufacturer of the computer
If you have saved the files yourself, read this:
make backups on an external hard drive or DVD
see if this information helps you
How to make a backup of your data
http://www.vista4beginners.com/how-to-backup-your-data
How to restore your files
http://www.vista4beginners.com/how-to-restore-files
the 1st link below is how do the backup complete pc
http://www.bleepingcomputer.com/tutorials/tutorial145.html
and that is how do to recover the backup complete pc
http://www.bleepingcomputer.com/tutorials/tutorial144.html
and here is the information of microsoft in restoring a system image backup
http://Windows.Microsoft.com/en-us/Windows-Vista/restore-your-computer-from-a-system-image-backup
If you have problems, it's in here is a forum for microsoft at the link specifically for backup questions below
http://social.technet.Microsoft.com/forums/en-us/WindowsBackup/threads
Tags: Windows
Similar Questions
-
When you restore the backup on itunes, will be saved the apps already on the ipad?
Hello
When you restore the backup of itunes
for an air2 ipad has already I want to keep, new applications
the new left on ipad?
Thank you very much!
Backup restore will overwrite the device.
You can re - download apps that are absent from purchased.
-
What happens when you restore a backup of a Bitlocker encrypted drive?
What happens when you restore a backup of Windows (disk image) made from a Bitlocker encrypted drive?
I use Bitlocker on the drive of my BONES and my data disks. It will be a complete restoration to its original state encryped or something else?
I use the TPM module, but the USB key with the key. Thanks for your time. HAL
The answer to your questions is in the following article: http://blogs.technet.com/filecab/archive/2008/04/29/complete-pc-backup-vista-and-vista-sp1-windows-server-backup-longhorn-server-and-bitlocker-faq.aspx.
I hope this helps.
Good luck!
Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
-
When you try to install Turbo tax, I get error 1601.
When you try to install Turbo tax, I get error 1601 (which are 641, 80070641). I am running Vista.
original title: problem installing WindowsHello
1. is the question confined to Turbo tax?
2 have you made any changes to the computer before the show?Method 1: Run the fix - it of the article mentioned below:
Solve problems with programs that cannot be installed or uninstalled
http://support.Microsoft.com/mats/Program_Install_and_Uninstall/Method 2: Error 1601: "Windows Installer is not available" when you install or update:
-
Original title: domain Active Directory unavailable Services
I have an HP laptop, works with Vista Business SP2, all MS etc updates Now, I get a message "Active Directory Domain Services" unavailable when I try and find the printer and cannot print to any printer, USB or a netwrok, I used to be able to. Dead in the water. I tried the trick of Notepad listed in this forum, "Run as administrator", disable the firewall, malware, antivirus, uninstall the drivers, updates re-installed, downloaded, everything. HELP PLEASE!
HelloThank you for the update.Question: There may be conflict between printers.Try the methods that you have not tried earlier and check after each method:Method 1:
Solve printer problems: http://windows.microsoft.com/en-US/windows-vista/Troubleshoot-printer-problemsMethod 2:
Step 1: uninstall the printer driver and reinstall the driver:
Find and install printer drivers in Windows 7: http://windows.microsoft.com/en-US/windows7/Find-and-install-printer-driversStep 2: Define any default printer and check:
Change your default printer: http://windows.microsoft.com/en-US/windows-vista/Change-your-default-printerMethod 3: problems printing from the Internet: http://h10025.www1.HP.com/ewfrf/wc/document?DocName=buu01105&cc=us&LC=en&DLC=en#N453Reference link:
Impossible to print or view, preview printing a Web page in Internet Explorer:
http://support.Microsoft.com/kb/973479It will be useful. -
problem when you use the parameter $ v in a package
Hello.
I have to get the parameter data $ v view within a packet, but when I compile it, he gives me the error "PL/SQL: ORA-00942: table or view does not exist. However, the owner of the schema of the pacckage has privileges during this point of view because when I run select * v parameter $ outside of the package, I get data without problem.
I tried to compile using the names SYS.v$ parameter and SYS.v$ _parameter, but none of them works.
Do I need special privileges to sys or something like that? What is the command?
I also tried this:
create or replace view oracle_parameter
as
Select *.
setting of v$.
but it showed me the error "Insuficient privileges."
Thank you.The user needs to have the privilege granted explicitly not through roles.
Trygrant select on v_$parameter to user1;
also
create or replace view oracle_parameter
as
Select *.
setting of v$.but it showed me the error "Insuficient privileges."
What is the number of the ORA error? Make sure that the user has create the privilege of seeing as well.
Published by: yingkuan on January 20, 2009 15:41
-
I first thought that my hard drive went wrong, because it would not allow my to reinstall the Windows XP operating system on the hard drive. I get the blue screen of death. So, I went out and got a new hard drive and tried to install the XP operating system on the new hard drive. I had once more the blue screen of death! So I ask why it does this? I'm stuck!
Here is the error code information:Stop: 0x0000007E (oxc0000005, 0xF749D0BF, 0xF78E9208, 0xF78E8F08)PCR.sys - base at F7496000, datestamp 3b7d855c F749dobf addressPlease help me! I have a dell Inspiron 1520, if it's relevant somehow.original title: I need helpOK, then 'search' in the bios.
make sure that the bios contains specific data on time system, the RAM and the hard drive, IE. :
Make sure that the date and time is correct.
Make sure you installed the amount of memory shown in bios the amount real matches.
Make sure that the new hard drive and its size is denoted accordingly.
(go to dell.com and look for the model number. then go over the web pages on it and the faq on the bios and the size of the ram that came standard with the laptop)
-
Post-installation SQL scripts when you restore the RMAN backup to a higher version
Hello
If I have a backupset from RMAN, say a 11.2.0.3.0 DB and I want to restore it to a DB 11.2.0.4.5, I know I have to open in upgrade mode, and run the SQL of the PSU OJVM components as well as the power supply of January 2015, once the recovery is complete.
Is there something specific about the order of the catbundle, the utlrp, the utli112 and the OJVM postinstall scripts that must run after catproc?
I guess it must be:
catproc-> utli112-> OJVM PSU - > catbundle-> utlrp
But the thought that I would check just in case there is something specific that I missed.
Thank you
Phil
Well - to perform a test upgrade will help you perfect/tweak the process
-
How to prevent the WIndows Activation when you restore the material in the same FVO
I just want to know, on a Vmware ESX 3i 3.5.0 on a hard disk crash scenario, when only the hard drive has been replaced. How yo make an ovf import (backup) that requires no windows activation.
Please see my answer to your previous question (Re: still Windows Activation required even if the restore of a virtual server on the same hardware)
André
-
When you open a PDF file, all I get is code or jibberish
It's a pdf file, but it's jibberish
Hello
1. are you unable to open PDF documents?
If you are not able to open PDF documents, then I suggest you try to install the latest version of Adobe reader and check if that helps:
It will be useful.
-
When you try to install WordPerfect x 5, get error 2203 - 2147287035 system error
I use Windows 7 Ultimate on a computer at home. I get 2203 Installer error messages when I try to install WordPerfect x 5; the installation is interrupted until it is complete. The system error number is 2147287035.The error message indicates that Setup cannot open some files of database setup, but every attempt, it gives files different numbers (file - for example, f1e20.ipi - which do not seem to be there at all). I am connected with full administrative privileges.
Cause: The temporary folder by default for the user (%temp%) has insufficient permissions assigned to it.
* Stop and restart the Windows Installer Service:
- Click the Windows menu button (formerly start) or press the Windows keyboard.
- In the search box, type Services and then click on the Services element that appears at the top.
- Expand the Services window, and then scroll down to Windows Installer.
- Right click on the Windows Installer list item and then click on stop, right click again and then click Start.
* Add the group with full control permissions everyone to the list of permissions of the default temporary files folder:
- Click the Windows menu button (formerly start) or press the Windows keyboard.
- In the start search box type % temp %, and then click the Temp folder item that appears at the top.
- At the top of the window of the Explorer, in the address bar, click the folder to the left of Temp in the path of the folder (default Local).
- In the folder list, right-click the Temp folder and then click Properties and then click the Security tab.
- Click the button change... and on the next screen, click Add.
- On the screen in the window large text type everyone and then click on check names - everyone should then be highlighted.
- Check the Full control under the column allow and then click OK, then OK again and OK again to close all windows.
Questions about installing Windows 7?
FAQ - Frequently Asked Questions from Installation Windows 7 & responses -
Whenever I try to open a document in adobe on a Web site I get Runtime error: ProgramC:\Program Explorer\ iexplore.exe, then he said: this application has requested the execution to terminate in an unusual way. For more information, contact the application support team. It happens as a Microsoft Visual C++ runtime library. I have recently installed SpeedmaxPC because the system was so slow. Can anyone help?
original title: runtime errorThanks for the advice guys, I have reset internet explore and it seems to have fixed.
-
When you try to install Windows updates I get errors 66A and next.
original title: 66A and FF errorsI tried to install the important updates KB2446708 and KB2467174. On the first appears an error 66A. On the second a FF error. How can I solve this?
Hello
see if that helps to fix:
How to reset the Windows Update components?
There is also an automatic 'fix - it' here
http://support.Microsoft.com/kb/971058
Also, try to put the KB numbers in the search on the link below and then manually download the
http://www.Microsoft.com/downloads/en/default.aspx
or repost in the correct windows update forum
http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update?page=1&tab=all
-
I know there have been a few posts on this in the past, but I have a slightly different query.
To copy files from my drive NTFS of Windows 7 64 bit for my Western Digital My Book World Edition II 2 GB player manually, not with the WD software provided), for some files, the following message appears."Are you sure you want to copy this file without its properties? The X file has properties that cannot be copied to the new location. »After investigation, it appears that Western Digital My Book World Edition II is not NTFS format and is, in fact, driven Linux.Their technical support has confirmed that, despite the message, it is safe to copy files and rely on this backup (I want to backup my drive HARD whole so I can do a clean install - so it's really important!).Is anyone able to advise exactly what means the message in terms of properties lost?If you right-click on one of the files in Windows Explorer, then select Properties, you will see the Details tab of the properties he wouldn't if the files have been copied to a drive not NTFS. They are written in an Alternate Data Stream (ADS), and the FAT format readers include ADS.
It depends on the file type of the importance of these properties. If you have spent a lot of time, adding titles and comments and authors and authors e-mail addresses to docprops your Word documents, for example, that the work would be lost.
If you can live with the loss of these properties, go ahead - standard properties will be re-writings in the file when you restore from backup. It's of course time and resources.
To avoid this problem, format your external drive to use the NTFS system.
Noel
-
Preview screen turns black when you use the slider to soften ultra key
Hello
I'm working on a video, including a greenscreen. That is why I use the ultra key to make the transparent green screnscreen. Whenever I touch the slider "soften" Ultra key, windos preview blackens. I can't get it back to normal until I restart the first. Version 2015.4.
This issue is being investigated. So far it has been reproduced with acceleration GPU on Windows. What is the case on your system? Also, could you provide your operating system, graphics card and if you use CUDA or OpenCL?
A possible solution is to go into project settings > General and set the Mercury Playback Engine software only, when you use the parameter to soften.
Thank you.
Maybe you are looking for
-
Satellite M40x-148: where can I get the recovery disk
I need a recovery CD for my satellite m40x 148.Is there someone who could help? Were make a copy? A big thank you to anyone with a solution
-
too long in the loops of whlile (timed)
HY I am: routinely labview developer course made, advanced no performance (not even as it may seem, I need that). Programm: multi all structure of event loop with lines of command for each loop, more a single elemnt queue for each loop running as a v
-
I plugged my Toshiba laptop to my HD TV
After all hang up I have a screen on the laptop and the TV HD and everything works fine. The only problem is the display is too large on both screens, can someone help me?
-
Cannot install HP D110a on Dell laptop
Windows 8 on Dell Inspiron 15. Cannot install my printer. The Wizzard install will not work. My HP Photosmart e-all in one series D110 disc will not work because this is for XP, Vista, 7 Version 14.0.1 this has worked on my Acer laptop, but who die
-
TMS on demand? With Jabber
Can I create a conference in Muli in TMS - reservation resources MCU (but without ends) in order to be able to have dial-in users. (with stem). The MCU fixed maximum partisipants to say (EG: 4 video in the model). Users could be registered of CCUM o