TMS on demand? With Jabber

Similar Questions

• TC cannot connect to TMS on demand conference

  Hello community,

  I sent TCS in our video conference infrastructure and SIP Trunk to CUCM.

  I can do by opening a web session of the TCS for manual registration and dial points endpoint or lectures on the conductor using SIP.

  But if I do the Conference planning on recording of the Conference, the TCS and TMS don't auto connect to the Conference. Registration (SIP URI) alias are configured on TCS.

  I see on the connection of conference TMS setting the driver calls the CHT by using the h.323 protocol but TCS is not registered with the h.323 Gatekeeper. It's using a SIP trunk to CUCM. Is this a limitation if the TCS uses SIP trunk?

  tcs_error.jpg

  

  Thank you.

  ACCOUNT that is configured with CUCM planning only is not supported yet in TMS using the recording during a conference booking. See cisco-tms-cant-schedule-sip-recordings-tcs for more details, the solution is to add the alias to record with a participating entry model or the phone book.

• TMS totally lost with PE, help!

  Hello, I am very lost...

  I have:

  TMS14.2.2

  TMSPE1.1

  VCS7.2.2

  The keys:

  -TMS Provisioning cisco-extended (100 active clients / devices)

  -Systems (10)

  -Systems (100)

  .

  works not tms user portal, this option has been removed?

  to have smartscheluder need another spare key?

  WebEx want to integrate it with the other keys?

  Sorry

  Hello

  If it comes to the page, you set permissions on then is not what I'm talking about.

  As the admin user connected to the MSDS, click administration tools:

  

  Click user management

  

  Click on groups

  

  Once you get a list of groups:

  

  I flew over the Group of users, there is an orange button on the right click:

  

  Click on "set permissions".

  

  Now you can begin to assign permissions by default users group has all permissions to all.

  Please let me know if you have any questions.

  / Magnus

• Help with Jabber AD auth and TMSPE

  Can someone point me in the right direction to obtain the documents that cover the VCSC auth TMSPE operation device and available Jabber and auth users.

  I have the TMSPE guide and the auth VCS guide, but I'm looking for clarity on how the users who have been auth with AD via VCS would get provided by TMSPE when the users are not in TMSPE right now?

  Thanks in advance

  Tim

  Sent by Cisco Support technique iPad App

  Hi Tim,.

  Successful commissioning, you import these users AD in TMSPE.

  Initial authentication for the user of jabber will be through VCS to AD, but after the authentication for a commissioning successful that the user must be in the TMSPE database.

  If the user is not present, then you will get an error message.

  For TMSPE, set the default zone to check the credentials only.

  Thank you

  Alok

• TMS by booking with MCU in cascade

  Hello

  My client has questions about booking TMS, they have 2 microcontrollers (4205,5320), CTS and 14.2 TMS endpoints

  They want to use 5320 as the main rooms for booking, but if the resource on 5320 is not sufficient for the booking then cascade 4205 to increase capacity.

  I found in the admin MSDS distribution routing guide (low cost print routing and better) but I'm not sure this device meet the requirement.

  The Administrator's guide also said "Different MCU models using cascade when manually configure cascade is not supported in Cisco TMS"

  Note it doesn't you different medium cascading of MCUS in TMS is not supported?

  Anyone try this before please advice.

  Thank you.

  Kind regards

  Wassila

  You can't necessarily force TMS to use a 5320 on a 4205. Remember, TMS treats all the ex-codians as the same, so it is not defined which, two bridges, TMS will prefer.

  Also note that MSDS does not automatically cascade; cascading always requires the invention of the user. The user must explicitly choose a distribution algorithm.

  Kjetil-

• Join TMS MCU fails with "no ip bandwidth...". »

  We are trying to install a telepresence VTC system. We are trying to register the MCU (5320) (4.5) for TMS (14.6). We use a virtual VCS as the doorman. When attempting to add the TMS MCU, we get a warning "no bandwidth set to the system - system has bandwidth IP or ISDN bandwidth..." MSD displays zeros (0) for Ports and bandwidth. We have defined the bandwidth of the MCU on parameters of the H.323 MCU. There must be some little thing that we have not been configured correctly. We rechecked SNMP parameters, parameters H.323, etc. anything.

  Someone at - it have this problem before?

  TIA,

  Mark

  Areas are used in routing when creating the Conference schedules.  You can assign areas after adding points of termination or infrastructure in TMS, or while you are being added to them.  You can read more about which areas are in the TMS administration Guide, starting on pg 46.

  Regarding your MCU, if you are devoid of multimedia ports, it is probably the root cause of the problem.  Cisco have added to them, you'd only you you receive the product similar to how you added the activation keys and encryption.  If you go to the Cisco Licensing Portal, navigate to obtain other licenses > license of telepresence to return, then enter the serial number of the MCU.  It returns all the keys related to this MCU option if media ports were purchased, they should appear on the screen.  You are looking for something that says "L-5300-4PL.

• How to maintain the pre, post-demande with patch migration

  Hi experts,

  I need suggestions on migration of patch. I must apply all RPC patch file on r12.1.1 for all the module. nearly 40-50 patch must be applied.

  My question is:

  can I migrate all the patch request pre and post request with the main patch.

  and some manual step as post request such as execution one request can be made that all CPP applied patch file.

  and

  a patch were required to apply the patch of delta as R12. AD. B.Delta.3 as long as the request.

  can I have merged this type of patch with the main patch.

  concerning

  pritesh Rodriguez

  in this case is the admerge patch maintain orders to apply the patch?  as

  Patch 1.pre - ask

  2. main patch

  3 post patch request

  Yes.

  Thank you

  Hussein

• Integration: Jabber with VCSC

  Hi experts,

  I'm new in the world of telepresence and I will install into a new customer a solution with VCSC, TMS and MCU.

  The customer already has a CUCM with Jabber and they want to deploy the Jabber with VCSC, they want that, for example, a Manager actually a video conference with other offices through your Ipad with Jabber

  I have not found a document with this configuration, can someone help me with the documentation of this integration?

  With their experience of telepresence, including the complexity of this integration? Can give me of highlights and key points of this integration?

  Best regards

  In addition to what Alok suggested, there are other things, you should consider:

  • The version of the recommended software is CallManager 8.6.2 and later (you can try 8.5.1, but there is no support BFCP)
  • It must integrate CallManager and VCS by following this document:

  http://www.Cisco.com/en/us/docs/Telepresence/infrastructure/VCs/config_guide/Cisco_VCS_Cisco_Unified_Communications_Manager_Deployment_Guide_CUCM_8_9_and_X7-2.PDF

  • To enable content sharing between registered in CUCM Jabber and the end point registered in VCS, make sure that your Jabber in CUCM devices have a SIP profile with BFCP protocol enabled, as well as the setting "Allow presentation sharing via BFCP" set to allow.
  • If you want to schedule conferences in MSDS for the Jabber in CUCM, you can add them to TMS as a 'room '. By using this option, you will be able to plan the Conference and the calendar control (it's better than using the Participant model)
  • About the phone book, you might have some problems. If your devices registered in VCS use device with an alphanumeric URI address, for example [email protected] / * /, you will not be able to add this contact to Jabber clients registered with CUCM, alphanumeric once is not supported. A solution would use only digital device address for all devices. About Jabber for Telepresence, you can define directories using TMS, in this case, you can add contacts without problem, either using a digital or non-digital address.
  • If you have endpoints another enrolled in CUCM who will call the end points registered in VCS, make sure your devices are running compatible software versions, mainly the videophones. It is strongly recommended to use the latest version of the software.
  • Be aware that Jabber for Telepresence doesn't support Instant Messaging, as the common Jabber support with presence server

  I hope this helps.

  Paulo Souza

  My answer was helpful? Please note the useful answers and do not forget to mark questions resolved as "responded."

• Jabber client - encryption of VCS Expressway with MRA

  Hi all

  I'm working on the implementation of MRA for a video solution existing. Version CUCM is 9.1.2 (no IM & P server), vcs - c and vcs-e 8.2.2.  Client Jabber is 11.5.x

  I finished most of the introduction and I am able to call internally and externally through MRA.

  I still have a few things to tweak.  One is the encryption of video calling once jabber connects from outside.  From my understanding, the thigh jabber call end point and VCS Expressway uses TLS. But when I run wireshark on the PC with Jabber client, I don't see the RTP stream as being encrypted.

  CUCM my jabber device does not use a secure profile.  Is it ok or not?

  Please let me know if more are needed.  Thank you

  You can confirm the call is encrypted from the client of jabber MRA by doing as follows (I used 11.5 jabber client, if you are using an older client, I can't guarantee this method):

  1. make a call from the client jabber ARM, once the call is configured and media is established, you can end the call.
  2. create a jabber client problem report (help > report a problem...)
  3. Enter the required details and save the .zip file.
  4 extract the file "jabber.log" from the .zip file. Since this file (at least since the version of client jabber 11.5) has the SIP messaging included in this document, you can use TranslatorX to view the file (you can also use a text editor if you wish).
  5 generate a diagram of the log file.

  translatorx - 01.png

  

  6. in the diagram of the scale, you should be able to locate the origin of the call. Search for an invitation, in my case a "RE-INVITE" and select it. A pop-up window will appear with the details of the SIP message.

  translatorx - 02.png

  

  7. read the content of the message prompt of the SIP protocol (focusing on the SDP - the component of negotiating media). I won't go into detail about how to read SIP messages (there's a good article here, it is not for jabber specifically, but the same concepts apply).

  translatorx - 03.png

  

  8. close the prompt message and open the message 'OK w/SDP' to examine the response of the VCS-E. The SDP response, we can confirm that the encryption settings have been accepted for the media (media will be encrypted).

  translatorx - 04.png

  

  For re - apply point Jamie, unless you run CUCM in mixed mode and using security profiles, signalling/media encryption stops on the thigh of CUCM/endpoint and the VCS - C respectively. See the diagram below for reference (mixed mode not implemented).

  MRA-media - flow.png

  

  You need not applied to the device of CSF security profiles to obtain the encryption between the client of jabber MRA and the VCS-E. If you can decode signaling and media packets in Wireshark your jabber client, you probably will not connect via ARM (ARM is always encrypted).

  Please let us know if that helps.

  -Jon

• On-demand VPN with AnyConnect

  Hi all

  For a need for one of my clients, I am trying to configure VPN on demand with a Cisco ASA 5520

  The goal is that AnyConnect will prompt you for a connection when users use a specific application (SAP portal) & only at this time

  They use for Windows XP operating system

  I can't find examples of this type of configuration, I'm not even sure it's possible

  Anyone of you have an idea for this?

  Thanks in advance!

  Demand is currently only available on the IOS ONLY function

  Sent by Cisco Support technique iPad App

• Passing of TMS physical server in VM with external SQL Server

  What we have:

  13.2 physical TMS with TMSPE running on the Windows Server 2003 Enterprise with SQL server 2005.

  Application of TMS, tmsng, and TMSPE all located on the same server.

  What we wanted to do:

  Move the 13.2 TMS with TMSPE to 2008 r2 VM with tmsng located on the separate server from SQL 2008 VM (external).

  First attempt; the physcial and TMS VM servers with the same host name, the different IP addresses.

  (Physical server removed from the field after copying tmsng db and taken offline - changed then to the TMS VM server host name).

  13.2 of TMS and TMSPE installed smoothly on the virtual machine, we copied then the db tmsng existing since the physical server on the SQL 2008 VM server.

  Everything seemed fine, except that we could not clearly one of the TMS tickets tell us different MST services were not running, this despite the Court and restaring every MSDS services several times.

  TMPSE diagnosis showed all green, but the VCS - C told us a different story; with all of the connections; telephone directories and devices, users will fail with an http 400 error.

  At this stage our window of opportunity was closing quickly, we had to go back and bring back the old physical server, on the line.

  During testing, we used different for the physical host names and servers of MV, but we found TMS2 tickets thrown indicating different services of MST did not run on TMS1, so we thought we would try with identical host names for TMS1 and TMS2.

  There are some dependencies that we missed?

  Any advice on how to achieve better would be much appreciated.

  see you soon

  /Jens

  Hello

  I have seen this problem several times before and his tickets basically generation because it has a double set of services listed in under TMS Server (below), the following list Maintenance TMSNG db when you move it, it shows that there are for example 1 TMS Live Racing Department and one stop of service TMS Live where the next generates this ticket. Simply click the clear list to solve the problem.

  Regarding the TMSPE, have you moved the db TMSPE more on the new server or you let it run to the old?

  At all the configurations to correct in terms of user name / etc in the field configuration settings?

  Best regards

  Magnus Ohm

• EX90 two autonomous with the public IP address can make video calls among them self on the Internet or not?

  Dear expert;

  I am very new to VCS and TP Cisco.

  We implement now presence Cisco TV with VCS - C, VCS-E TMS, TCS, MCUS and endpoints with Jabber in a single edit.

  and in another configuration CUCM 10.5, UCCX 10.5 IM & P, Jabber with some 10 officers.

  Now the question is in our building on the 2nd floor we have an EX90 and on the 5th floor an EX90 and on local network, we can make video calls using the IP address.

  In the same way is it possible to make a video call between 2 devices EX90 (both have public IP) present in a location different in the same city on the Internet without the participation of VCS - C and VCS-E.

  It's the client request :)

  Concerning

  Paiva

  Yes, but leaving these systems outside in nature with public IP addresses, leaving you are vulnerable to a number of questions. See for example http://www.videonationsltd.co.uk/2014/11/h-323-cisco-spam-calls/

  https://supportforums.Cisco.com/discussion/12336591/sourceh323idcisco-incomingcalls

  https://supportforums.Cisco.com/discussion/12340591/nuisance-h323-calls-SX20

  The offers above with H.323 calls, in addition to this, you will encounter similar problems using SIP where the systems will be analyzed by tools such as SIPVicious

  /Jens

  Please note the answers and mark questions as "answered" as appropriate

• How can I get Jabber works on iPad without CUCM?

  Nice day

  Question: How can I get Jabber works on iPad with TMS and VCS instead of CUCM?

  Material: TMS 14.5 with VCSC/VCSE X8.2.1 and TMSPE 1.0

  Rarely Jabber is used on an iPad here for the last time we tested, it was probably more than a year and it worked great. I have a new request if and when you go to the store I notice the previous product working is no longer available and has changed for Cisco Jabber 11.0.3. I feel that this only works with CUCM.

  Can someone tell me if it is possible to get this new application running without CUCM and rather through VCS /TMS? I tested a variety of attempts to connect to the new application and they are all lead to not being able to find a server. Cisco documentation is a bit complicated on this issue so I'm hoping someone here might have some experience with this.

  Any help is greatly appreciated.

  Thank you
  Mike

  The customer you are looking for is 'Cisco Jabber Video for iPad', which is what Jamie refers in its response.

  However, the Jabber video for iPad is therefore more available for download, as it's end-of-sale (eos-eol-notice-c51-732786), this is because Apple requires that all their applications must be 64-bit, and it was not possible to update Jabber video application as 32-bit based.  In addition, in the case where you have the video Jabber for telepresence (Movi) customer is also EOS (eos-eol-notice-c51-732787).

  Replacement for both video Jabber clients products are Cisco Jabber client (that you mention at the end of your message) with CUCM only, as call manager is management that moves to Cisco for call control.

• Jabber error 481

  Hi Gurus, I am getting SIP error 481 when I called from one video jabber let say J1 to another one let say J2 but J2 doesn't answer and J1 hangs up. normally I would expect J2 stops ringing but it keeps on ringing. I am using jabber 4.6, TMS 14.2 and a single VCS with software 7.2.2. Does anyone know how to fix this problem? Is there a misconfiguration in VCS or TMS causing this or? let me know if you need any logs? cheers, Jack

  Hi Jack,

  This is a known bug problem/software we CSCue55832. This is a bug with Jabber 4.6 not TMS or VCS.

  This bug is scheduled to be fixed in the future software versions Jabber.

  One option is to downground your jabber 4.4 or ealier.

  Best regards, Ahmad

• VCS Express with CUCM 10

  Hello

  There is a lot of confusion on Express C/E & VCS C/E, if anyone can confirm my following queries:

  With VCS VCS & Express control every endpoint to register with VCS control (no participation required CUCM or VCS control can't integrate with CUCM)?

  With Highway Core & edge that every endpoint is record in CUCM & CUCM will record Expressway Core?

  For calls B2B & movi Jabber, that we must have Expressway Center/periphery, VCS control/Express IS NOT support jabber movi & called B2B?

  Software Express C/E & VCS C/E are the same, but the licenses are different?

  Our clients have obtained

  1 x control VCS licensed

  1 x Express VCS under license

  1 x ISDN gateway,

  1 x TP driver

  1 x TP management suit.

  Kind regards

  Francisco

  With VCS VCS & Express control every endpoint to register with VCS control (no participation required CUCM or VCS control can't integrate with CUCM)?

  Yes, no CUCM is required, endpoints can also enroll in the VCS-E or it could register SIP to VCS - C proxy endpoints. A parallel installation of VCS CUCM with a trunk should also work with todays versions.

  The VCS will be only support standards basis of endpoints SIP and H323, its main purpose

  a for video settings. You won't be able to use it to register, provision or use of Cisco IP phones with it.

  With Highway Core & edge that every endpoint is record in CUCM & CUCM will record Expressway Core?

  See the C & E highway as a single unit to the external communication. The registrations are transferred by proxy

  CUCM outside.

  But that also means, you can't register 3 party at the highway and even end points

  Cisco endpoints must support the installation of the fast track C & E.

  The highway also runs things like XMPP for Jabber.

  For calls B2B & movi Jabber, that we must have Expressway Center/periphery, VCS control/Express IS NOT support jabber movi & called B2B?

  The C & E Highway can also manipulate calls business2business or another sip trunks / h323, but this infrastructure requires the media license.

  B2B calls also works very well with the installation of VCS.

  If you are talking about how to provide Jabber accounts and video Jabber:

  There are video Jabber (which is implemented by TMS and VCS) and Jabber (i.e. led CUCM) there.

  If you are talking about outside calls that he can just be regarded as regular b2b external calls.

  then they be it work with VCS or motorways on the site of the end.

  Software Express C/E & VCS C/E are the same, but the licenses are different?

  It is correct. Licensing Expressway is more attractive for users CUCM, but you already have

  have SPRDD in place that should work in all cases well.

  With CUCM, you get licenses Expressway in any case. So according to the type of use, you.

  B2B, internal calls... you can add a configuration of fast track to Jabber and the stuff of office home and

  use the VCs to B2B and part 3 records.