When you start a laptop computer, I get a Microsoft c++ Library runtime message and pc stops booting

Similar Questions

• When you start Windows XP Professional I get warning no. firewall is enabled.

  For about a week now when I start my computer at the bottom of the screen I get this message "your computer is perhaps in danger that no firewall is enabled. Click on the bubble to solve the problem. By clicking on the bubble I get Security Center, which shows the firewall is. There's the word (underlined) Reccomendations. I click it and turns on the firewall. After that I get an error message. "Exception EAccessViolation in module DD. exe to the access violation of 0003AE67 at address 0043AE67 in module 'dd '. Read of address 00000008. I never had this problem before, ever. Is it possible to fix this?

  Hi SilvioCarlini,

  1. did you of recent changes on the computer?

  2. do you have security software installed on the computer?

  3 when was the last time it was working fine?

  Method 1

  See the link below and run the Fixit tool, check if it helps.

  Diagnose and automatically fix problems of Windows Firewall service

  http://support.Microsoft.com/mats/windows_firewall_diagnostic/

  Method 2

  If fails it above step then check out the link below and run the Fixit tool, check to see if it helps.

  How can I turn on or turn off the firewall in Windows XP Service Pack 2 or later versions?

  http://support.Microsoft.com/kb/283673

• When you start Windows Media Player I get error: "Server execution failed".

  Hello

  When I try to start Windows Media Player by double-clicking an audio or video file, I get the error "Server execution failed" for this file. Can someone tell me what this means and what I can do about it?

  Thank you

  Christi

  Hi Christi,

  You may receive this error if you try to open a file media shortly after the closing of Windows Media Player (WMP).  When you close WMP, the user interface is closed immediately, but WMP continues to be in a State of "shutting down" for a few seconds, and the process is still in activity during this period.

  To avoid this problem it should be enough to wait a few seconds before Windows Media Player opens, 2 seconds at least.

  Bobby

• When you start a Vista computer, send a message that MSVCP71.dll is missing

  Hello

  When I started my computer, I got a window to open up and say that Avast! could not be started because MSVCP71.dll not found. I had Avast! installed on this computer for about 6 months now and never had a problem. My characteristics of the computer. are:

  Windows Vista Edition Home Premium 64-bit
  Service Pack 2
  A6750y HP
  AMD Phenom 9650 Quad-Core 2.30 GHz
  8 GB RAM

  Any help is really appreciated. Thank you.

  Uninstall/reinstall Avast.

  Disable Avast first > right-click on its icon in the notice area > Stop On-access Protection.

  Go to Control Panel programs and features > uninstall.

  http://www.avast.com/eng/download-avast-home.html

  Download and reinstall the update.

  See you soon.

  Mick Murphy - Microsoft partner

• "Modem on Bus High Difinition Audio device" error on found new hardware when you start your laptop Gateway mx 6214. He can not find a driver to install and fix this? Is there a driver or a fix for this problem?

  Showes up like a yellow question mark in the Devces system as 'other '.   Cannot find a driver to install, both causes a loop continues when starting, new hardware found and cannot find a driver to install?

  Hello

  Download and install the drivers from the link below after selecting the operating system

  http://support.gateway.com/product/default.aspx?tab=1

  Diana

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• When I try to open msn, I get "error microsoft visual c ++ runtime library." How can I fix it?

  The windo error appears a few seconds after clicking on the butterfly.  This ancestral started after I tried to load the upgrade of msn premium software.

  Install the following updates should contribute to solve the problem. Install only the necessary file for (x 86) 32 - bit or 64-bit (x 64)

  Microsoft Visual C++ 2008 SP1 Redistributable Package (x 86)
  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=A5C84275-3B97-4AB7-A40D-3802B2AF5FC2&displaylang=en

  Microsoft Visual C++ 2008 SP1 Redistributable Package (x 64)
   http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=BA9257CA-337F-4B40-8C14-157CFDFFEE4E&displaylang=en

  Microsoft

  Package redistributable Visual C++ 2010 (x 86)
  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=a7b7a05e-6de6-4D3A-A423-37bf0912db84

  Microsoft

  Package redistributable Visual C++ 2010 (x 64)
  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=bd512d9e-43c8-4655-81bf-9350143d5867

  Sincerely,

  Marilyn

• When you start the computer, the error: "year error occurred in the program during the initialization of the error Code 0 x 80070002.

  Buy HP Pavilion with Windows 7 64 bit.  Migrate some applications and files of old laptop computer with Vista 32-bit.  Most applications migrated work but when I start the new computer, still get this error message: "year error occurred in the program during the initialization of the error Code 0 x 80070002. Once I close the error message box, applications seem to work.  What is a real problem or just a nuisance, I can't ignore?

  original title: Error Code 0 x 80070002

  Hello

  I suggest to start the computer in safe mode and check if the problem persists.

  Start your computer in safe mode:

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  If the problem does not occur in safe mode, and then perform a clean boot.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: Perform step 7 to put the computer to a normal startup.

• When I start my laptop script error on the screen.what that means and how it get rid you

  When I start my laptop SCRIPT ERROR comes on my screen. What it means and how to get rid

  You have assigned to a category of forum that is completely different to your question/problem. Your question has been moved to a forum category that matches it's better.

  If you don't already specify the product name, Windows version, version of the program and other necessary information on the product you have a problem with: do so immediately!
  And please explain the problem more in detail. Do not try to give an overall summary abstract with terms invention. Use natural language. Explain step by step what you do and what you see and why it is a problem.
  Provide accurate and complete data: exact error message of name, exact product of exact, exact file names, exact address... you get!

• When you play FarmVille, my computer crashes or I get a notice that "bits have been lost" and refresh the page... usually don't work and I have to start all over again.

  When you play FarmVille, my computer crashes or I get a notice that "bits have been lost" and refresh the page... usually don't work and I have to start all over again.

  I think that there is a prob with this game, it does not matter if you use firefox or IE. Or another browser. It blocks something. Or causes probs.

  FB needs to fix it. There are a lot of people (in a Google search), who are having probs. One way or the other

• When you buy a used computer how do you get around the user so password down, you can load your commands on the computer

  When you buy a used computer how can you getaround left password buy the former owner, so you can to the low load you information

  Hello

  I'm sorry, but the strategy of microsoft in these forums, is that without assistance will be given about the lost, unknown or forgotten passwords

  read the policy at the link below

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-security/keeping-passwords-secure-Microsoft-policy-on/a5839e41-b80e-48c9-9d46-414bc8a8d9d4

  ______________________________________________________________

  and when you buy a second hand computer, because you never know what it contains or is used since, the best policy is to reinstall the operating system

  How to reinstall Vista

  Contact the manufacturer of the laptop computer and ask them to send you to vista recovery disks to reinstall the operating system back as it was when you bought it

  they do it for a nominal cost of $

  also ask them if you have a recovery partition on your hard drive to get back to the way you bought

  you would normally press F8, F9, F10 or F11 or Alt + F10 or 0 to start to start the recovery process according to the manufacturer

  Ask them of the exact key sequence

  or borrow a vista microsoft dvd; not a HP, Acer recovery disk etc

  Make sure that you borrow the correct 32-bit or 64-bit microsoft dvd to your computer

  they contain all versions of vista

  This is the product key that determines which version of vista is installed

  http://www.theeldergeek.com/Vista/vista_clean_installation.html

  How to replace Microsoft software or hardware, order service packs and replace product manuals

  http://support.Microsoft.com/kb/326246

• When I start my laptop (running vista 32-bit) upward and the connection, get this error message "error loading c:\users\Appdata\Local\Temp\sshnas.dll".

  When I start my laptop (running vista 32-bit) upward and the connection, get this error message "error loading c:\users\Appdata\Local\Temp\sshnas.dll".

  Hello

  Download update and scan with the free version of malwarebytes anti-malware

  http://www.Malwarebytes.org/MBAM.php

  You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes

  http://www.bleepingcomputer.com/download/anti-virus/rkill

  If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

• When I start my laptop running windows 7, I sometimes get a duller tone of flashing two beeps as if something is wrong. What coud this be and how do I kill him?

  When I start my laptop running widows 7 I sometimes get a most annoying intermittent tone of two beeps suggesting (I imagine) that something is wrong. I think this has been already experienced with the connection of the optical mouse (Verbatim). Later, everything was fine, but the sound is back and the phone seems to work OK. What could cause this warning sign and how do I get rid the same?

  Hey Neville,

  1. What is the brand and model of your computer?
  2. did you of recent changes to the computer?

  Let's try these suggestions and see if the problem still occurs.

  If you are using AMI BIOS, see the error messages associated with it.

  Number of Beeps      Error Message
  ---------------------        ---------------
         1             DRAM refresh failure
         2             Parity circuit failure
         3             Base 64K RAM failure
         4             System timer failure
         5             Processor failure
  

  These errors are codes reported by THE system BIOS. Because errors are hardware related, you must call your equipment manufacturer or dealer to help fix the problem.

  The product included here, AMI BIOS, is manufactured by vendors independent of Microsoft; We make no warranty, implied or otherwise, regarding the performance or reliability of this product.

  Hope the above information has been useful. If you have any doubts, answer here and we are happy to help you.

• Computer stops responding with a black screen when you start Windows XP. Cannot select anything advanced startup options

  Original title: can't open Windows
  I can't open my laptop at all... block when I select anything in the mode without failure or screen black normal mode :(
  What should I do? Thank you!!!

  Hi Mihou,

  1 have. what changes you made before the question?

  2. What are the options you see in the advanced startup options?

  You can follow the methods in the article in order to solve the problem.

  Computer stops responding with a black screen when you start Windows XP
  http://support.Microsoft.com/?kbid=314503

  Azeez Nadeem - Microsoft Support [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• How do access you the list of programs that start when you start your computer?

  How do access you the list of programs that start when you start your computer?

  Saturday, January 19, 2013 19:48:16 + 0000, Psylly wrote:

  How do access you the list of programs that start when you start your computer?

  First of all, note that you should be concerned all the programs
  starts automatically, not only those who enter in the system tray.
  Not all the programs auto-start manifesting by an icon in the
  Status bar.

  On each program, you don't want to automatically start, check its
  Options to see if he has the choice of not start (make sure you)
  Indeed choose not to run, not just a "don't show icon.
  Optional). Many can easily and better be arrested like that. If that is not
  work, run MSCONFIG from the start. Run the line, and then click the Startup tab.
  Uncheck the programs that you do not want to automatically start.

  However, if I were you, I wouldn't do it just for the application of
  the minimum number of running programs. Despite what many people say
  You should be concerned, not with the way that a lot of these programs
  you run, but who. Some of them can degrade performance severely, but
  others have no effect on performance.

  Don't stop all programs to run willy-nilly. What you need to do
  is to determine what each program is, what its value is up to you which
  the performance cost is its running all the time. You can try
  Internet search and ask questions about the details here.

  Once you have this information, you can make a smart informed
  decision on what you want to keep and what you want to get rid of.
  Ken Blake, Microsoft MVP

• How do you computer when you start upwards and stops

  How do you computer when you start upwards and stops?

  Hello

  1. You use any meaningful application in your system?
  2. Are you facing any problem sound in the computer or speaker?
  3. To better help you, let me know the brief description of the problem.
  4. Do you get audio startup in Windows?

  If you are facing problems of sound in the computer, see the link below:

  The startup sound is not played correctly when you start Windows XP, Windows Vista or Windows 7

  http://support.Microsoft.com/kb/321735

  Tips for solving common audio problems

  http://Windows.Microsoft.com/en-in/Windows7/tips-for-fixing-common-sound-problems

  It will be useful.