When you try to copy a file 'trust' in Vista, get the message 'Copy as administrator'

Similar Questions

• When you try to install my new Embird program I get the message "this link must be opened with an application, select application. What does that mean?

  Help, I hope that I've not messed up, too bad!

  Help, I have a small embroidery business and have used a program called Embird.  Yesterday, I downloaded an upgrade for this program. It said to uninstall the old program before installing the new, so I did.  Now when I try to install the new one it says this link must be opened with an application, select application.  I have no idea what it means that someone can help me?  I tried to restore the computer to a date prior to just start all over hoping he would restore the old Embird, it says that the file may be damaged and will not work.

  If you were able to 'merge', you have unzipped the file somehow.  What was all the messages when you did the merger?

  Follow these steps:

  1 information about the particular file in question

  Right-click on the downloaded file, and select Properties.  What does say for 'File Type' and what is the 3-letter file extension (after the point)?

  If there is no file extension, find the file using Windows Explorer, and then click Tools > Folder Options > view.  Uncheck "Hide extensions for known file types" and click OK.  Now, look at the file again for the file extension.

  2. test of exe files

  Click Start > run, then type notepad in the "open" box, then click OK
  Didn't open a Notepad window?  If not, what error message do you have?

  Click Start > run, and then type the following in the "Open" box and click OK
  %SystemRoot%\system32\
  Find notepad.exe (or just Notepad if file extensions are not displayed), and then double-click it.  What is going on?

• When you try to play .mp4 files in WMP, I hear the sound but the picture is distorted and I can't see the photo in Windows Media Player.

  * Original title: Windows Media PLayer

  I have Windows Media Player version 12 installed but when you try to play .mp4 files in WMP, I hear the sound but the picture is distorted and I can't see the picture.  Please see image attached.

  Even if I see that I can change the version of the file in a different format, I have the same problem with videos on websites that I can not of course change the format before playing these.

  I managed to fix the problem for about 20 minutes by flattening my computer re - install the operating system and this resolved until all updates have been through, and then it disappeared again.  I tried many codecs packs and this still does not help.

  My system is running Windows 7 and Media Player version is 12.0.7601.18840, which tells me that Media Player is the most recent version.

  Please can someone help?

  

  Open uninstall a program in windows and in the left click on the feature to turn on or off windows. Clear the check box of the window Media Player, and then click ok. This will uninstall the drive, and then restart.

  After restarting the same steps, now, check the box for the same and perform a restart and if all goes well it should solve the problem.

  Note: Make sure that Windows is up-to-date.

• When you try to open a PDF from Adobe, I get this message "to the 882 ordinal not found in SHELL32.dll dynamic link library.

  When you try to open a PDF from Adobe, I get this message "to the 882 ordinal not found in SHELL32.dll dynamic link library.  Any ideas on how to solve this problem.  Have Windows Vista.  Thank you.

  original title: problem opening Adobe pdf.

  Hi Gary,.

  Are you facing this issue only when you open pdf files?

  Method 1:

  You can try uninstalling and reinstalling Adobe software and check if it helps.

  Uninstall a program

  Method 2:

  You also try to run the system restore.

  Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.

  To run the system restore, you can consult the following links:

  System restore

  System Restore: frequently asked questions

  Hope this information is useful.

• When I try to open a PDF email attachments I get the message: SECURITY WARNING - your current security settings do not allow this file to download.

  Network discovery sharing sharing inbound network incoming Remote Desktop RDP TS Remote Desktop Remote Assistance Network

  
  

  When I try to open a PDF email attachments I get the message: SECURITY WARNING - your current security settings do not allow this file to download.    I am running Windows 7 and the email is in Windows Live Mail.   HOW CAN I SOLVE THIS PROBLEM?

  Thanks a lot for your help. I finally found a way to open the PDF file by saving it to my documents folder then right-click to open it in Adobe Reader. This has proved to be a more useful to any similar future problem solution.

• When I try to use a MS fingerprint reader I get the message "no mapping between account names and security IDS was done."

  Original title: fingerprint digital mapping

  When I try to use a MS fingerprint reader I get the message "no mapping between account names and security IDS was done."

  I tried the fix (http://support.microsoft.com/kb/890737?wa=wsignin1.0) without success.

  Any ideas?

  Hello

  Have you tried to reinstall the fingerprint reader, as mentioned in the previous post article?

  If your computer is on a domain, the question you posted would be better suited for the IT Pro TechNet public. I would recommend posting your query in the TechNet Forums to get help:
  Windows XP IT Pro Forums
   
  For more information, see the articles:
  Understand and configure the Welcome screen and the classic logon screen
   

  Hope the helps of information.

  Let us know if you need help with Windows related issues. We will be happy to help you.

• Windows 7 - get this message when you try to open a file. Windows cannot access the specified device, path or file. You can not have the appropriate permissions to access the item.

  When I left click on the icon to open the file, I get the 17 ' error '. "  I right click on icon and select "run as Administrator'l and it will open, but lately it won't and the message above."

  Hi Bob,

  1. in open file are you get this error message?

  2. don't you make changes on the computer before this problem?

  This problem may occur if one of the following scenarios arises on your PC.

  • You do not have permissions for the file or the location of the file.
  • The file is located on a site that is not accessible at the moment as a network location or an external drive that is not currently connected to the computer.
  • The file has been moved or deleted.
  • The shortcut or the file is corrupted.
  • The file may be blocked by Windows.
  • Your anti-virus software may block the file.

  Refer to the help article:

   

  Error "Windows cannot access the specified device, path or file" when you try to install, update or launch a program or file

  http://support.Microsoft.com/kb/2669244

  Important: Disable your antivirus or changed settings can make your PC vulnerable to viral, fraudulent, or malicious attacks. Microsoft does not recommend that you disable your antivirus software or change settings. If you need to temporarily disable your anti-virus software, you should reactivate as soon as you are finished. Use this workaround at your own risk.

  Response with more information to help you.

• How can I change my photos of the PDF to JPEG? When I try to print photos from my computerl I get the message that the file is a postscript.

  O.K.   I can't print photos from my computer.   When I find a picture & click on 'print', I get the message that the image is a postscript file.  How can I change the @# $$ %% @ * thing back to where it is a jpeg image?

  Click Start > run > type CMD > Ok. Command prompt opens. On the command line type or paste each of the commands below, one at a time, pressing ENTER after each command. Restart the computer and attempt to print the photos.

  Assoc.JPEG = jpegfile

  Assoc.jpg = jpegfile

  In addition, what makes you think that file associations have been changed to PDF format? You can right click on the files in question > will the properties and the file type. It would be very strange for jpeg files have been changed to PDF format. Possible but, strange.

• When I try to use Windows Media Player 11 I get the message: Windows Media Player is not properly installed on windows vista

  Original title: MediaPlayer does not open. Followd Scout121 answr. Got the message: not recognized as int/ext control.  Help!

  I followed the directions for the question of Scout121, posted by Bikesh T 20 October 2011.  When I entered the "regsvr32vbscript.dll", I got the message: is not recognized as internal or external, command an executable program or batch file.

  We have Windows Vista Home Premium 32 bit version 6.0 (Build 6002: Service Pack 2).

  I received a validation code windows, but when I try to use Windows Media Player 11 but the message: Windows Media Player is not properly installed.   When I try to install the player form Microsoft Web site, I get the message that the installation has failed.

  Please notify.  We are clueless.  Thank you.

  Hello

  What troubleshooting steps you have done until now?

  Click on the link below and run the fixit.

  Method 1: Solve the problems of Windows Media Player video and other media or library

  http://support.Microsoft.com/mats/windows_media_player_diagnostic/

   

  Method 2: Disable Windows Media Player and then turn it on to Windows features and check if the problem persists.

  Disable and enable Windows Media Player and check if it opens.

  (a) click Start and select Control Panel.

  (b) click on programs and features.

  (c) click on or turn off Windows features turn on on the left side.

  (d) develop the features of media; clear the check box Windows Media Player.

  (e) click Yes and OK to continue.

  (f) restart the computer.

  Note: If windows media player is already disabled, follow the steps mentioned below:

  After the restart, follow these steps:

  (a) click Start and select Control Panel.

  (b) click on programs and features.

  (c) click on or turn off Windows features turn on on the left side.

  (d) develop the features of media; Check the Windows Media Player.

  (e) click Yes and OK to continue.

  (f) restart the computer.

  This would be re - install windows media player 12.

  See the link: http://windows.microsoft.com/en-US/windows-vista/Turn-Windows-features-on-or-off

  Method 3: Perform scan of SFC (System File Checker) and see if the problem persists.

  http://support.Microsoft.com/kb/929833

  Let us know the status of the issue.

• When I try to access system restore, or programs I get the message "windows cannot access the specified device, path or file."

  I use Windows XP and all of a sudden, it seems that all my files are gone.  When I try to access anything or in the control panel in Help and support, I get the same message.  Even when I click on the box that appears indicating that my disk hard space available is insufficient, when I click on it I get this message.  Anyway for my restore my system and access my files again?

  Hi Ladygodiva7,

   

  Method 1: Put the computer to an earlier point in time where everything worked well. To do this, follow the steps mentioned in the article below to perform the system restore

  How to restore Windows XP to a previous state

  http://support.Microsoft.com/kb/306084

   

  Method 2: you can follow the steps described in the section below to restore the security settings

  How to restore the security settings to a known working state?

  http://support.Microsoft.com/kb/313222#appliesTo

• Since the update Firefox 6.0, some websites do not load correctly. I suspect it has to do with the Java being disabled because of the compatability modules. When I try to go to Tools/Add-ons, I get the message "Loading" for several minutes without chang

  Update Firefox 6.0 is useless to me because many websites I visit are not displayed properly, I guess because the Java modules are disabled because of incompatibility. They appear correctly in Internet Explorer.

  In addition, the add-on from Trend Micro is not compatible, which leaves me with a positive feeling.

  When I try to check to see if these modules can be updated, the menu item Tools/Addons just goes to a page with "loading" and stays there for several minutes without change until I close it.

  I would like to know the procedure to regularize this version of Firefox to my previous version that worked.

  Firefox 5.0/5.0.1/4.0/4.0.1 and earlier 3.6.20 all contain questions of security and stability that will not be corrected. You put your system at risk by using any version of Firefox that 6.0 or 3.6.20. Any person who displays a link to other versions is to be irresponsible, in my opinion.

  Java
  
  If the incompatible extensions in Add-ons > Extensions are Java Console, you have no need them unless your doing Java development. Most of the users have not yet installed, but Java will install Java Console with each update. You can delete them manually:

  • http://KB.mozillazine.org/Java#Multiple_Java_Console_extensions

  The only thing that affects the functioning of the sites/Java applets on the web is the plugin (Add-ons - > Plugins) "Java (TM) Platform SE (version)". Do not forget that it is enabled and that you have not all extensions which affect/block "scripts".

  • Check commonly used plugins: https://www-trunk.stage.mozilla.com/en-US/plugincheck/
  • Update or install Java (aka, next generation Java plug-in for the Mozilla browsers): install or update Java in Firefox

  Trend Micro
  
  You must contact Trend Micro or go to the forums on their website to inquire about their plans to update the add-ons/toolbars they install in Firefox.

  Problem with the display of the Add-ons Manager
  
  The Add-ons Manager gets in a loop of loading due to the recent update of Firefox 6 and servers being overloaded because users and update process are looking for updates to the add-on. If you stay away from the "Get Add-ons" selection on the left of the screen of the add-on Manager, you should have no problem with that. This situation is expected to resolve when the overload of Firefox 6 update is complete. I do not always use this "Get Add-ons" option, instead, I go to the website of modules and the search for what I want from there: https://addons.mozilla.org/en-US/firefox/search/?q=clone & cat = all & x = 0 & y = 0

• When you try to load my trading platform change I get a message ' not enough memory to process this command... ". Any suggestions?

  Using windows xp... Never had a problem before and I use this platform every day

  Hi Daniel,.

  I suggest you perform the clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  Note: After the boot minimum troubleshooting step, restore your computer to a Normal startupmode.

• When you try to access newsgroups Microsoft with Outlook, I get the error failed to connect to the server

  Configuration:
  Account: msnews.microsoft.com
  Server: msnews.microsoft.com
  Protocol: NNTP
  Port: 119
  Secure (SSL): 0
  Code: 800ccc0e

  News of MS servers have been closed since last October. You can still access newsgroups with another server as eternal September, AIOE, etc., but the traffic is very light.

• When you try to remove programs or update something, I get the error message that it cannot find the windows installation program and its usually due to installer is not properly installed.

  I was in Add or remove programs and try to delete a program and he said that he could not reach the RPC and or the installer of windows are not accessible due to the windows installer is not installed properly.

  How to re-install Windows Installer:
  http://xphelpandsupport.MVPs.org/how_do_i_reinstall_the_windows_i.htm

  Windows Installer 3.1 Redistributable (v2)
  http://www.Microsoft.com/downloads/details.aspx?FamilyID=889482fc-5f56-4a38-b838-de776fd4138c&displaylang=en

  Windows install 4.5 Redistributable
  (Latest version of Windows Installer)
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en

  Update for Windows XP (KB958655-french)
  Install this update to resolve the issue in MSI Installer 4.5
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=e0735d57-03cc-42e5-823e-60c9efe74aac & amp; amp; displaylang = in & displaylang = in

  Also:
  Common problems of Windows Installer
  http://support.Microsoft.com/?kbid=555175

  The Windows Installer CleanUp utility (Note: this link has changed the utility he did).
  http://support.Microsoft.com/kb/290301

  JS
  http://www.PAGESTART.com

  Never be afraid to ask. This forum has some of the best people in the world to help.

• When I try to add or remove a program I get the message windows can't because windows install is in safe mode.

  I don't know why my installer of windows is in safe mode.  How can I change this

  Hi sharonww,

  You have reached the critical support of Windows Installer. This problem is treated better here in the Windows forum, I moved your thread to the appropriate forum.

  Kind regards
  Gerard G.