When you try to move the curson using the button on the screen pass in zoom mode

Similar Questions

• "Impossible to copy the requested resource is already in use" error message when you try to move the file to the thumb drive.

  I'm going to try really hard to do this makes sense, but I don't know much about computers.  Bear with me.

  Brother gave me a computer.  A graphics Nvidia GeForce 9800 inside.  Because it restored the system settings, the drivers are missing.  Can not connect this computer to the internet.

  So, I went to the nvidia site and downloaded the necessary drivers on my OTHER computer, which is what I'm now on the right.  The download ends, and when I try to move the (drivers) file in the USB, I get this delicious "cannot copy xxxx that the requested resource is already in use".  It is not in use.  I can't even use it on this computer as its pilots for a graphics card that is not yet part of this computer.

  What should I do to make sure I put the file with the drivers on a USB key, on the port to the other computer.

  (by the way, this also occurs with a few random mp3s of the mine.  10 of the 12 tracks on a CD, for example, does copy on the USB no problem, but then two of them to come up with the error message, for no apparent reason.  Don't know if it's relevant)

  Try another USB key. That one is may be damaged or failing. In the meantime, to burn the drivers on a CD - R disc (not CD - RW) to take the target machine. MS - MVP - Elephant Boy computers - don't panic!

• Problems when you try to move the 3 stepper motors

  Hello

  I have problems when I Isaiah to compile a 3 stepper motors control program.

  I have 3 steepest motors and controller (3 SMCP33 + SMCP33-EVA) nanotec.com, they also provide an example of Vi to control a motor that works successfully, but problems happen when I try to adapt the program to try to start the 3 Motors. The final application for this is going to be a Cartesian robot XYZ so finally I need to program coordinates to move the 3 Motors.

  I am new to LabVIEW, so what I do is try to adapt the nanotec example to order 3 engine as follows.

  -J' I assign each engine a different address, doing so that I can run each engine separately. But when I try to run 3 programs at the same time, they work but all moving them the engine (the first that has been run).

  -If I try to make a sort of sub - VI is the same thing, only one motor is driven.

  -Moreover, I get a warning when I try this, I have attached a screenshot of this.

  I have attached the Vi and texture it to improve my description.

  I woul be grateful if someona can help aport.

  Kind regards.

  Thanks for posting the original.  By comparing the two screws immediately gives an indication of what might happen.

  In the picture you posted you circled two places where you changed the address of the reader. In the Example.vi - Nanotec address of the player is connected to about 14 seats.  So when you try to run the other engines in your modified program, the 12 places, you have not changed the address of the player are always preset to motor 1.

  What you need to do is to divide the example VI in at least three parts.  The first part initialization. The next part moves the engine.  The last part ensures that the engine is stopped and made any required another stop.  Each party becomse a separate Subvi. Each Subvi has the address of the reader as input.  The initialization and shutdown parts are placed before and after a while loop.  The movement parts are inside the loop.  You can use three of each sub - VI for the three engines or a Subvi combined with subVIs move three to manage all three engines.

  I can't say what approach might be better without knowing more about how you plan to order the engines - one at a time or all three at the same time, what kind of feedback is used, how management mistakes and other topics.

  Lynn

• "error code 43' when you try to move the iphoto folder.

  Hello

  When you try to transfer my photos on external hard drive folder, I get the message "the operation cannot be completed because one or more required elements could not be found. (Error code - 43) ".  I'm following the instructions from apple by drag-and - drop the file.

  have you rebooted and started the copy without opening any applications?

  How the drive is formatted?

  (select the drive, click CMD + i)

  

  you copy several files at once, or a large group of files or a file large?

• Error when you try to move the SSM to IPS 6.1

  I am running 4,0000 E1 and when I try to upgrade, it says "can't upgrade the software on the sensor. This package cannot be installed on the platform of the SSM-IPS10. »

  I tried upgrading via IDM, FTP, SCP, and I get the same error.

  I'm trying to upgrade using the package IPS-AIM-K9-6.1-1-E1.

  Simple problem to use the file of E1 6.1 (1) bad.

  The IPS-AIM-K9-6.1-1-E1.pkg file is specific to the AIM - IPS module for ISR routers.

  AIM - IPS module for ISR routers must not to be confused with the ASA-AIP-SSM modules for devices of the SAA.

  All other platforms (including the SSMs) should use the standard 6.1 (1) E1 file upgrade:

  IPS - K9 - 6.1 - 1 - E1.pkg

• Error when you try to move the cloudvolumes folder in a different data store

  OK, so I'm moving my App volume 2.10 cloudvolumes folder of datastoreA on vcenterA on datastoreB on vcenterB, because we want to separate us from our VDI of our basic infrastructure.

  We are able to access the two vcenters on the web client.

  I tried to just copy the folder datastoreA to datastoreB cloudvolumes and received the following error.

  Copy of the file object has already been deleted or has not been entirely created

  
  

  I've seen this error in Veeam before when moving virtual machines from a data store. The solution is to remove and readd the virtual machine in the inventory.

  
  

  Everyone tried to move the cloudvolumes folder?

  
  

  Any help would be appreciated.

  
  

  Thank you
  

  
  

  
  

  I would never move the folder because there are files that will always be accessible or are not in read/write mode.

  I suggest you copy the files from the 1 folder to another, or maybe add an additional data store to the manager Appvolumes and let the files (appstacks at least) copy automatically.

• again message when you try to move the files to the trash

  "The files are in a volume that doesn't support garbage."

  using an iMac.  ransacked thousands of files and never had this message.  I was able to delete the files on disc well.

  another?  through images that have been a few years I came across about 30 that were pixelated.  remember never seen so many people like that.  passed through hundreds of images in that folder and other than these 30 only met a few more pixelated ones.  ????

  Still, here's something to try:

  In the Finder, navigate to the level root of the external HD which contains your photos; Create a new folder, call it whatever it is. Delete the folder.

  Back to LR and you should find that pictures delete normally after that.

  This thread: this volume does support not the trash...

  Mike

• When I try to record the screen, an error pops up

  Help, please!

  I get this error when you try to save the screen:

  "Capture is denied because the high-density display has been detected. "Please Set DpiAwareness = 1 in AdobeCaptivate.ini and restart the application.

  Get help to resolve this issue would be greatly appreciated!

  Thank you

  Hello

  Have you tried to take the steps that are mentioned? Basically, you will need to find the file named AdobeCaptivate.ini and try to change to add the referenced statement.

  Cheers, Rick

• After you download El Capitan, I received the following error message when you try to install: the drive is not formatted in MAC OS extended (journaled). Use disk utility to enable logging or reformat the disc. Can anyone help?

  After you download El Capitan, I received the following error message when you try to install: the drive is not formatted in MAC OS extended (journaled). Use disk utility to enable logging or reformat the disc. Can anyone help? (My disk utility shows that she in MAC OS extended (journaled) format.)

  It shows that it is Mac OS extended, not journaled. Click enable logging in the toolbar.

  The thing you read is if you format the drive using the RAID settings you have selected. You have to look at the bottom of the window where it shows the Format.

• Error 1721 when you try to install the Sprint SmartView software to use the Sierra Wireless 598U device.

  Error 1721 when you try to install the Sprint SmartView software to use the Sierra Wireless 598U device.

  It comes with Vista, upgrade install and activate Forum.

  http://social.answers.Microsoft.com/forums/en-us/vistanetworking/threads

  "Connect to a network, mail and the Internet."

  They will help you with your question in the Vista Networking Forum above.

  See you soon

  Mick Murphy - Microsoft partner

• When you try to restore the system using the system image, Windows 7 does not find the USB HDD.

  I have 3 computers backed up with their images of system on an external USB drive.

  However, when you try to restore a computer using system image, Windows 7 fails to find the USB HDD.

  I think it would be probably due to the fact that the WindowsImageBackup folder is probably not in the right place or a superfluous folder. Here's an example of how my disk backup has arranged record...

  Root for example E: /.

  -Computer #1

  - WindowsImageBackup
  -ComputerName #1

  -202348 backup 2016-05-29

  -Catalogue

  -SPPMetadataCache

  -MediaID (file)

  -Computer #2

  - WindowsImageBackup 
  -ComputerName #2

  -202348 backup 2016-05-29

  -Catalogue

  -SPPMetadataCache

  -MediaID (file)

  -Computer #3
  - WindowsImageBackup
  -ComputerName #3

  -202348 backup 2016-05-29

  -Catalogue

  -SPPMetadataCache

  -MediaID (file)

  I realize that the WindowsImageBackup folder should be at the origin, so I moved this computer folder #1 a less E:\

  However, restoration is unable to find it and can't even see the USB HDD.

  Can anyone offer advice on what I can hurt?

  Original title: restore the System Image

  Thank you all for responding with your advice and suggestions but the failure has been a bit of my doing (?).

  When I went to another port for the USB, everything worked fine! Simple solution, that I should have tried first - duh! :-)

  My USB 3.0 4TB drive was originally on a port USB 3 (which was either missing or not recognized by my Bios) and when I changed my old disk ports USB 2, everything has worked well!

  Thanks again, all...

• I use TDE tablespace encriptación and backup is performed (no encriptación rman). I get the error message when you try to restore the database

  I use TDE tablespace encriptación and backup is performed (no encriptación rman). I deleted the database and try to restore the backup. I get the error when you try to restore the database with rman restore database.

  ORA-19870: error when restoring backup piece + FRA_DG, oratst, backupset, 2015_03_2

  ORA-19913: could not decrypt the backup

  ORA-28365: portfolio is not open

  About what I know, you should be able to RESTORE the data, but no RECOVERY without portfolio being opened.

  Check the value of the variable environment - ORACLE_UNQNAME

  It has everything first a correct value and try to open the wallet.

  HTH,

  Pradeep

• When you try to move an image to a folder, whatever that means - "this will cause the file on the disk to remove. If you continue, this movement or any changes you made before it can be canceled?

  When you try to move an image to a folder, whatever that means - "this will cause the file on the disk to remove. If you continue, this movement or any changes you made before it can be canceled?

  I saw wording like this before, and I don't think it's anything to worry about. I don't know why Adobe chose these specific words, that your changes are certainly editable after the move.

• I get the error message: 1 when you try to download the creative application of cloud. I tried rerun the installation and use of the cleaning tool. I can not uninstall and reinstall the app because there never have down loaded initially.

  I get the error message: 1 when you try to download the creative application of cloud. I tried rerun the installation and use of the cleaning tool. I can not uninstall and reinstall the app because there never have down loaded initially.

  Try with the solution provided in the link below:

  ERRO 1: Creative cloud cannot install

• I have the following error message when you try to access the settings preferences "load library failed with error 1114: (DLL) initialization routine failed. I use Windows OS 10. Can anyone help?

  I have the following error message when you try to access the settings preferences "load library failed with error 1114: (DLL) initialization routine failed. I use Windows OS 10. Can anyone help?

  HI lifeimagecreations

  Greetings!

  Please see this thread in the lightroom preferences entry CC2015 crashes with LoadLibrary failed with error 1114

  If this does not work, reinstall the program with administrative rights.

  Let us know if this helps

  Concerning

  ~ Assani