When you use tool crop the screen goes all black.

Similar Questions

• Since my computer downloaded the auto update: hotfix for windows XP (KB2570791), it does not start in place... the screen goes all black. I can only start in safe mode.

  I restored the computer to a previous point, but as soon as I stop and restart, the same thing happens. ??

  Hello

  You can try the steps listed in the link: after the Windows Logo appears, or after you log on Windows, a Windows XP computer can display the wallpaper, a black screen or a blue screen: http://support.microsoft.com/kb/318027

• Whenever we start to use our computer, the screen goes black and the message 'Auto adjust is in Prgress'. Then, all of our screen is small and all the icons and pages are smaller than before.

  original title: Auto Adjust

  Hello.

  Whenever we start to use our computer, the screen goes black and the message 'Auto adjust is in Prgress'. Then, all of our screen is small and all the icons and pages are smaller than before.

  I tried restoring the system that works and that gets our screen back to normal but every day that this Auto setting is coming and we can't seem to stop it.

  Any help would be appreciated... Thank you

  Try this:

  Go to the Web site of the manufacturer of your laptop computer-graphics/computer card > drivers and downloads Section > key in your model number > look for the latest Vista drivers > download/install them.

  Then:

  http://Windows.Microsoft.com/en-AU/Windows-Vista/change-screen-resolution

  Change the screen resolution

  Screen resolution refers to the clarity of the text and images on your screen. At higher resolutions, items appear sharper. They appear also smaller, so more items adapted to the screen. At lower resolutions, fewer items adapted to the screen, but they are larger and easier to see. At very low resolutions, however, images may have serrated edges.

  See you soon.

  Mick Murphy - Microsoft partner

• Get "Not responding" when you use law ON the.

  Get "Not responding" after each keystroke when you use law on the.  I see the message and then after about 10-15 seconds, if you press the tab key.  Literally, it happens after every key stroke.  I've never had this happen before.  My laptop has Windows 8.  At this rate, it'll take a week to complete my tax return.

  Hello

  Thank you for your response.

  I'm sorry for the late reply.

  I appreciate your efforts to resolve the issue.

  I suggest you run the system file checker (SFC) and see if it helps.
  Reference:
  Use the System File Checker tool to repair missing or corrupted system files
  http://support.Microsoft.com/kb/929833

  System File Checker is a Windows utility that allows users to find corruptions in Windows system files and restore the damaged files.

  Note: It can ask the difficulty Windows installation DVD and allowing SFC to do more than minor repairs. Could some of the files saved on your computer are deleted when fixing corrupted files.

  Please keep us updated on the status of the issue.

  Thank you

• When you use find on the page (ctrl + F on Windows) it is a message indicating the total number of matches. What does the first number?

  When you use find on the page (ctrl + F on Windows) it is a message indicating the total number of matches. What does the first number?
  I'm more interested in the case when this number is smaller than the total.

  Hello

  I think you mean the text stating "x of there matches", to the right of the box where you entered the search term.

  The first number ("x" in my example above) indicates the current entry highlighted on the page that matches the search phrase. If you use the upper and down arrows to navigate through the instances of this term on the page, you will see this number go up and down.

  I hope this helps, but if not please come back here and we can look at another solution for you.

• Why always, I received management is not available when you use maps for the iPhone 6 and I live in the Qatar?

  Why I always get direction is not available when you use maps for the iPhone 6 more?

  Currently I live in the Qatar.

  Hi Alison, Sameh

  The reason why you see directions is not available, it's that for cards of Apple, turn-by-turn directions is not a feature that is available in the Qatar. You can search for places and satellite imagery
  Take a look at the link below for more details on what features are available in the Qatar.

  iOS 9 feature availability
  http://www.Apple.com/iOS/feature-availability/

  Nice day

• Satellite L300 - 29 X just crashes when you use some of the programs installed

  I bought a Toshiba L300 29 X for my daughter (30 years) help in its work of the University.
  Since we took this home and installed the OS it is questions. At first, I thought it was to do with Vista and so I bought the upgrade to Windows 7 and installed, but the same issues are there it just freezes when you use some of the programs installed.

  I tried restoring factory several times with Vista and still once I even made restoration to the first State to install W7 disk then updated from the web and then she still uses it for his United work and it freezes.

  There is nothing wrong with his work United as when using my laptop or even its partners a there aren't any issues or problems.
  Programs are in Office 2007 and it is the same copy I have in my laptop and they are both up-to-date.

  Its mobile partners is lower than its own specification and has less RAM so that to have only a single processor.
  I tried to install the W7 as a 32-bit and a 64 bit OS, and whenever there is any change in the problems with programs

  Can someone out there suggest a possible cause or same difficulty for am I at the end of my knowledge on this issue and my daughter is about to throw the thing out the window.

  Hello

  I think that the described issue could be related to a hardware problem, given that the laptop should not have problems running the Microsoft Office applications.

  In many cases, the s for laptop system could freeze due to a higher temperature.
  My girlfriend repeatedly asked for help because the laptop froze too.

  But the problem was linked to a higher temperature because cooling fans were clogged and cooling fans might not work correctly. She used the laptop sitting on the couch and there was not a lot of free space around the laptop to ensure good air circulation

  I want to say is that there are several reasons for such behavior annoying cell phone I think it would be wise to check the hardware first
  This should be done by the technician of the ASP.

• ORA-00902 error invalid data type when you use CAST in the PL/SQL Package

  I'm getting ORA - 00902 Datatype not valid error when you use cast in getEmpValues (see code below) method in the package I created.
  I don't know what is the cause of the error. Any help would be appreciated
  
  
  
  CREATE OR REPLACE PACKAGE TEST. TEST_PKG AS
  
  ARRAY TYPE MyTableType IS NUMBER;
  TYPE REF_CURSOR IS REF CURSOR;
  
  FUNCTION str2tbl (p_str IN VARCHAR2)
  RETURN myTableType;
  
  PROCEDURE getContactValues (p_ParameterString IN VARCHAR2, p_Cursor1 to REF_CURSOR);
  
  END TEST_PKG;
  
  
  
  CREATE OR REPLACE PACKAGE BODY TEST. TEST_PKG AS
  
  FUNCTION str2tbl (p_str IN VARCHAR2)
  RETURN myTableType
  AS
  l_str LONG default p_str | ',';
  l_n NUMBER;
  myTableType l_data: = myTabletype();
  
  BEGIN
  LOOP
  
  l_n: = INSTR (l_str, ",");
  WHEN the OUTPUT (nvl(l_n,0) = 0);
  l_data.extend;
  l_data (l_data.count): = ltrim (rtrim (substr(l_str,1,l_n-1)));
  l_str: = substr (l_str, l_n + 1);
  END LOOP;
  L_data return;
  END;
  
  /*
  p_ParameterString is a string of the form 3, 6, 8, 9'
  */
  
  PROCEDURE getEmpValues (p_ParameterString IN VARCHAR2, p_Cursor1 to REF_CURSOR)
  AS
  
  
  BEGIN
  
  
  OPEN FOR P_Cursor1
  
  SELECT *.
  FROM EMP
  
  WHERE EMP_ID IN (SELECT *)
  OF THE (SELECT CAST (TEST.) (TEST_PKG.str2tbl (p_ParameterString) as myTableType) double)
  
  );
  END getEmpValues;
  
  END TEST_PKG;

  ARRAY TYPE MyTableType IS NUMBER;

  This type must be created outside of the package as a SQL type if it must be used in a select statement.

• Why when you hit tab of the workspace goes haywire

  What is when you use the tab key to move between images that the Bridge workspace becomes crazy and gets all messed up? Thank you.

  Because "Tab" is the command to toggle the visibility of the side panels. Try to use the arrows to move between images

• Laptop sleep/wake extended/turn off when I invite to screen goes all black

  So im havin a bit of trouble with my laptop. I disappeared for a month and so did not use my laptop during this period. When I got home and started using it, I encountered some problems. It was pretty slow, often freezing etc. So I made sure that I installed updates for my system while he was aware, ran for registry cleaning also programs.  She improved after that, but I sometimes encountered the following problem. When I invite my laptop to go into sleep/hibernation / stop all that happens is the screen goes black/towers, but the system is still running and wont turn off. Otherwise when I open my laptop from sleep/hibernation it starts, but all I get is a black screen, resulting in me having to manually close the system using the power switch. Else have this problem or know what's happening? Thanks for the help in advance.

  On my, 29 Sep 2014 21:51:23 + 0000, Conor_McG wrote:

  So im havin a bit of trouble with my laptop. I disappeared for a month and so did not use my laptop during this period.

  We are direct opposites. I only use my laptop when I travel away from
  Homepage.

  When I got home and started using it, I encountered some problems. It was pretty slow, often freezing etc. So I made sure that I installed updates for my system while he was aware, ran for registry cleaning also programs.

  Ugh! Registry cleaning programs are all snake oil. Cleaning of the
  registration is not necessary and is dangerous. Let alone register and
  do not use any registry cleaner. Despite what many people think, and
  What software record cleaning suppliers are trying to convince you,
  have unused registry entries is not really make you hurt.

  The risk of a serious problem caused by a registry cleaner by mistake
  delete an entry you need is much greater than any potential benefit
  It can have.

  Read
  http://www.howtogeek.com/171633/why-using-a-registry-cleaner-wont-speed-up-your-PC-or-fix-crashes/
  and also
  http://blogs.technet.com/markrussinovich/Archive/2005/10/02/registry-junk-a-Windows-fact-of-life.aspx

  You can also read the section on the registry of CCleaner
  Here cleaning product:
  http://www.howtogeek.com/113382/how-to-use-CCleaner-like-a-Pro-9-tips-tricks/

  Let me stress that neither me nor anyone else who warns the
  use of registry cleaners never said that they always cause
  problems. If they have always caused problems, they would disappear from
  the market almost immediately. Many people have used a registry
  cleaner and never had a problem with it.

  The problem with a registry cleaner is that it carries with it
  the risk of a significant problem. And since there is no
  benefits of using a registry cleaner, running that risk is a very bad
  good deal.

• Photoshop CS4 crashes when you use shift and the move tool

  Help, please!

  Whenever I click on a layer with the tool move while holding the shift key (so I can limit the movement), photoshop crashes.  I get a message that says: "could not use the tool to travel because of a program error." And then photoshop just stop.

  Now I can use the move tool without holding SHIFT, but as soon as I hit the shift button and tried together... crash!

  What is going on?

  I was wondering if it has something to do with an updated video driver I installed yesterday.  He was not doing this before that.

  Suggestions anyone?  Please please please help!

  Have you tried to roll back the driver to see if the fault disappears?

  Alternatively, you can try to reset your preferences as described in the FAQ.

  http://forums.Adobe.com/thread/375776?TSTART=0

  You must physically delete (or rename) the preference files or, if you use the Alt, Ctrl, and shift, don't forget you get a confirmation dialog box.

  This resets all settings in Photoshop default.

  (A complete uninstall/reinstall will not affect preferences and a corrupted file may be the cause of the problem.)

• Why Photoshop is slow when you use tools such as brush or clone stamp?

  I'm on a Dell XPS computer laptop, Win 8.1, Core 7i, 16 GB RAM, SSD. Working on a file of 1 GB 16-bit with 20 layers aroudnd.

  When I'm using no matter what painting or retouching tools, must be a long until my stroke actually appear on the image instead see it instantly. I draw a line and the hourglass icon remains for 3-10 seconds on the screen before the shows in the line.

  Moreover, the Task Manager shows: 10 to 15% use CPU, memory of 45 to 50% and the disk and the network is less than 5%

  What could cause this problem?

  I was experimenting the same problem. Have you tried to reduce the size of the Tile Cache to 128K instead of 1024?

• Using issue view file when you use mp3s on the internal memory and the memory microSD external

  (1) if I have folders of mp3 on the player's internal memory and on the external drive microSD memory, can I use the folder to view all folders on the 2 memorys simultaneously integrated on one list or do I have to go through the files on each memory separately.

  (1) if the answer to question 1 is Yes, then I would like to now if I can have on the internal memory and external memory records with the same name, but with different files and the player will display these folders with both files on the internal memory and the external.

  I want to know because I like to browse through the files, and if the internal memory is full, I wish I could add more files in the folders where the internal memory by making a folder with the same name on the micro sd, and I don't like to go through the files on 2 devices at the same time, just on 1 list.

  Help, please.

  Thanks in advance

  The Clip + Treaty internal and external cards in 2 separate sources, under the folder view (it is quite logical, when you think of him, and just as 2 separate cards on your computer).  And if you look at the 2 lists separately (again, just like on your computer).  When you view your files using ID3 tags, both internal and external map content is merged in 1.

  If you do not have to see 2 separate lists, you can simply keep most / all of your content on the map either internal or external (even by, if you were really dead set on it, for example get a 2 GB Clip + and then using 8 or 16 GB external with her new card).

• When you use my microphone, the microphone level adjusts automatically.

  In order to fix temporarily I have right click on the speaker icon in the status bar, go to the recording devices, double-click my microphone, go to the levels tab and readjust it. It becomes a huge problem, when speaking with the microphone and the level goes from 100 to 20 randomly and all of a sudden I can't be heard.

  Sometimes she'll be right down, and I do not see a checkbox to disable automatic adjustment.

  I unchecked allowing applications to take exclusive control, but I'm not sure this is related in fact.

  Hey gerri,

  To clarify, you say that the volume slider in the properties of the microphone (pictured below) is self-adjustment:

  

  If Yes, do you think the cursor moving it is on?

  If so, this isn't a feature in Windows 7 that I know.

  I suggest to uninstall Skype temporarily and restart the computer to see if the problem resolves.

  Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Subversion password let go when you use data on the same svn forced maker.

  Hello
  
  We are running windows Xp sp3 with svn tortoire. Data Modeler 3.0.0 665
  
  Modeler data allows us to modify our data model.
  
  There is a svn repository for all data and source of our project.
  
  Problem:
  When you run the Modeler data and open a template that is located on the svn, an update on the svn repository repository always ask the password for svn.
  This problem also come if you do a simple deposit refresh the Data Modeler.
  
  It seems this substitution of data Modeler always the directory D:\Documents and Data\Subversion\auth\svn.simple Settings\...\Application file that contains the authentication for svn subversion.
  He forgets the password for svn and put the file read-only.
  
  You know the problem?
  close solution or work exist?
  
  For example, we can make a script which always replace the file changed. I'm trying to read but without success.
  
  Kind regards.

  Hello

  some of the features-svn Data Modeler is inherited from JDeveloper.
  Unfortunately, working with svn external tools (such as the turtle) is a well known issue for JDeveloper, because it encrypts and stores the password in another file and try to protect the file you mentioned.
  See more here: SVN and JDeveloper 11 g credentials

  Concerning
  Ivaylo