HP Pavilion 500-141ea: which recommended update BIOS to use?

Similar Questions

• HP PAVILION 500-141ea 8.1 update

  I have a 500-141ea PAVILION and its 2 weeks... my question is, someone has it improved to 8.1 with success? as microsoft is nagging me to do, if they have some advice before doing so, I ran microsoft update, I have the green light, a single shape Hp says its has not been tested and warns not to do so, can all a smooth confusion.

  Thank you

  Porl

  Your Support page has some drivers 8.1 update:

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4158&LC=en&cc=us&DLC=en&sw_lang=&product=5449722

• HP Pavilion 500-141ea: GPU for HP pavilion 500-141ea

  Hello

  A couple of years ago, I bought a HP pavilion 500-141ea, I am now looking to upgrade the GPU and the power supply on this subject. I want to replace the old GPU with a GTX 960 but I unure know if it is compatible with my motherboard because I'm not sure if it has the version of the bios that is needed to support the 960 GTX

  Information on the motherboard:

  MS-7778 (Jasmine)

  BIOS version: FRIEND 80.46 10/03/2013

  If it doesn't not work could offer you some suggestions?

  Thanks in advance!

  Madness 78, welcome to the forum.

  960 GTX requires UEFIin the motherboard instead of a standard BIOS / Legacy.  Your motherboard has UEFI.  You have two things to consider: 1) the power required to run the video card correctly and 2) the length of the card.  The power supply unit (PSU) to the count is 300W.  I think that you will need a minimum of 400W.  I recommend a block of power SUPPLY Corsair of at least 500W.  The modular power supply to reduce the number of cables you are using.  This allows for better air circulation.  You can determine if the card fits by the measure of the e/s rear plate at the front of the computer.  This will allow you to see if it fits and if other ingredients will be in the way of this Assembly.

  Please click on the button + Thumbs up if I helped you and click on accept as Solution If your problem is resolved.

• HP pavilion 500-141ea

  This is probably going to sound like a stupid question as im new to this, but I just baught HP pavilion 500-141ea and I leave there speakers play sounds, but I can't hear anything? I saw that it is said

  Audio: High Definition Audio 7.1 this means just the sound of reading or am I just stupid and it doesn't have speakers built in?

  Hello

  Your PC turn has no built-in speakers, but you can easily get a set of any computer store (or use a screen that has built in speakers).

  Best regards

  DP - K

• HP Pavilion 500-242ea: graphics card update

  I am an avid player of PC, when I try to play the new games IE cod blackopps 3 sound telling me that I have little memory, I think about buying additional ram, do I have to update my graphics card?

  System Pavilion 500-242ea

  mobo (jasmineR)

  chipset AMD A75 FCH

  MEM 4 x DDR3 Sockets

  a front side bus speed 4-way, 5 GT/s per lane

  processor socket FM2

  Exp 1 of slots pci express x 16 (ben2.0)

  3 PCI Express x 1 (gen 2.0)

  1 half-length mini-map

  Graphics

  235integrated Radeon R5

  AMD radeon 7560D 1440 x 900

  graphic mem 4 181 MB

  In the waiting

  You'll be glad you asked!

  This is your computer .  Power supply is 300W.  PROCESSOR AMD A8-5500.  D 7560 AMD graphics card.

  COD Black Ops must these requirements.   Your CPU meets the corrected value.

  The graphics are a serious difference... the comparison here is.  560ti vs the 760 and both are 170W.

  You will need at least a 500W PSU, but again, I would see that a 600W Corsair associated with a card EVGA.

  Finally, you need 8 GB of memory of motherboard.  Just 6 GB. Not sure about your Setup, because there are 4 locations, and you have 6 GB installed... Run the CPUID CPU-Z to analyze the 4 locations.

• Pavilion 500-304nd: failed to update the BIOS

  The HP Support Assistant keeps present me BIOS update SP70148, version 80.20Ap1. Even if I see no notice of this, it seems that the update has actually not every time after you download and install the update (black BACK box opens and closes) and subsequent automatic reboot. I also tried to use the download of your support pages, but nothing helped.

  Please notify. Thank you!

  We are aware that there is a problem with this update on the motherboard S of Memphis.

  I advise you when updating fixed or replaced.  Please be patient.

• Updated HP Pavilion 500 - 141ea graphic card

  Hey I treid look everywhere but I found nothing on how to improve the graphics card for this computer, can you tell me or help me find this computer takes in charge the cards? That currently is pretty bad so I would be happy to hear most if not all suggestions. (first post btw).

  Well I installed the Radeon 7770 on my computer and it works perefctly well, I may have high/ultra graphics on more recent games with reasonable frame rates (tested hardline BF, Titanfall, DayZ, Shogun, Skyrim) and certainly suited to my needs. I need a new power supply 500W and overrall costs about £130 (not sure what it would be in USD, given that the difference in tax). Thanks for all the help.

• HP Pavilion 500-141ea: GPU upgrade

  Hi all

  I'm new here, but hid for some time in the run up to the upgrade of my GPU.

  I am owner of a pavilion of 500-141 ea - spec/details here: here.

  I have had it for awhile now and have made a few casual games on it (Euro Truck Sim2) - it's OK at best, I am looking to upgrade the GPU to something a little better to improve the graphics. After absorbing as much information as possible on these forums, I discovered I obviously need a new graphics card, and as my current diet is valued at 300W, it would be best to stick to a moment PSU.

  Now, I've been watching the 960 GTX that seems a fantastic card but, for what I'm doing, I'm not sure if it's exaggerated.

  I turned to the GTX 750Ti after I've seen recommended by so many people. Including who I've been watching is the Asus version. Link. Looks like a solid GPU and fantastic value for money. I did some measure inside my case and think it "should" adapt, but as I am a novice I'm not sure, he would not blame on what whether 100%. It is the main thing that concerns me.

  For a power supply I was watching a CX500 Corsair, which should be more than enough for my needs at the moment. Looking at the ASUS card especially need a 6 pin directly from the power supply (from what I've read).

  I also read on UEFI/BIOS/settings issues so I'm ready for it to come when I update the map, but I'll post if I have a problem.

  So, I'm sorry for the essay, but I guess I want to know if anyone knows if the ASUS card would be and if the Corsair would be a good diet to use.

  Thanks for reading / your answers.

  Chris.

  CGD1, welcome to the forum.

  We do not mind trials because they give us the information we need to make good decisions.

  Here is the map of Newegg.  Normally, the thing that worries me cards dual fan is the length.  You want the card to fit and have lots of space for good air circulation.  This card is the perfect length.  Read the reviews to see what users have to say about it.  I also like the EVGA cards.  They have great Tech support.

  I love Corsair products.  The PSU you chose should work great.  The map in my link only requires 6-power connector additional.

  Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.

• HP pavilion p7-1455: new processor update bios

  If I update my bios on my HP 675852-001 MS-7778 motherboard I'll be able to upgrade to a new processor one like a http://www.newegg.ca/Product/Product.aspx?Item=N82E16819113404 & cm_re=amd_apu-_-19-113-404-_-Product

  Hi there @Bucket2142,

  Welcome to the Forums of HP Support!  I understand that you ask if a specific processor works with the motherboard of your system.  I'm happy to give you a helping hand with this.

  Looking at the HP Pavilion Desktop PC p7-1455 product specificationsand HP and Compaq Desktop PCs - features card mother MSI MS-7778 (Jasmine), the motherboard supports only the following CPU upgrade options:

  Trinity A4 - 5300 65W Dual-Core
  Trinity Dual-Core A6 - 5400K 65 W
  Trinity A8 - 5500 65W Quad-Core
  Trinity Quad-Core A8 - 5600K 100 W
  Trinity image A10-5700 65 W
  Trinity image A10 - 5800K 100 W

  Then one on that you specifically asked is not one of the supported types.

  Please let me know if it works for you and if it does not solve your problem, please mark this message as a solution. Bravo would be appreciated as well.

• Pavilion H8J91EA #ABU: failed to update BIOS on H8J91EA #ABU

  Has had a major disaster last night.

  Tried to update the BIOS on a Pavilion H8J91EA #ABU failed; Displays the boot block update message (or something like that - don't remember exactly) message stayed on the screen for centuries and then blacked out.  Now, the machine seems totally dead.  I tried the method of recovery of bios key 'Windws-key' and 'B' without result.

  Does anyone know if this feature is supported on the #ABU H8J91EA

  Thank you

  It sort!

  After failing to install the new BIOS understandable machine does not start.

  The option Windows key & B to retrieve the original BIOS is supported on this model but would not work.

  If you leave the machine off for a few hours the BIOS recovery works fine the first time try you it. but once the BIOS has loaded the system was unable to restart to complete the installation. Returning to the State where you cannot call the BIOS recovery feature and the machine is completely dead.

  Solution in my case was...

  • Power down machine
  • Leave for a few hours
  • Turn on, all holding the key windows and 'B '.
  • Wait for the BIOS recovery to start and release the keys.
  • Answer all questions and wait for the reboot to start.
  • If it does not start, turn the machine off and leave for a few hours.
  • Turn on the machine, and with a little luck, the boot will continue.
  • Answer any questions that you are asked, and wait.
  • Breathe a sigh of relief...

  I hope it's useful to someone.

• Pavilion dv7-1110eo: HP Pavilion dv7-1110eo error after update BIOS startup

  I've updated the BIOS (it is now Hewlett-Packard F.49) with a download from the HP Web site. I wish I had not done that because it's my portable patient. When start it freezes and the only thing that I see is black screen with HP logo. No button works.

  Later I discovered that BIOS itself is not the problem (I tried to get back the old version for a long time without success), it is the connected USB devices or USB ports, don't know. My laptop starts normally and works perfectly if I remove all plug-ins USB until I press the power button. After the black screen is passed I can plug the USB and they work too. I wonder if any of you ever faced this kind of problem...! If you have and you know how to solve this problem, please help. (Finnish HP customer service couldn't help me).

  Here's a full report of the problem (my blog):

  http://10101101010110.livejournal.com/32291.html

  http://10101101010110.livejournal.com/33650.html

  http://10101101010110.livejournal.com/33872.html

  Hi @10101101010110,

  Thank you for visiting the Forums HP's Support and welcome. I looked in your question about your HP Pavilion dv7-1110eo Entertainment Notebook and questions with a BIOS update. You can reset the BIOS with this document by selecting the reload the default BIOS settings. Helping other people.

  Note Remove all USB devices. Disconnect all devices of non-essential, as these can cause some problems.

  Here is a link to the HP Support Assistant, if you need it. Simply download and run the application and it will help with the software and drivers on your system, including USB devices.

  I hope this helps.

  Thank you.

• Pavilion 500-141ea: HP Recovery Manager

  I read in another Board that HP Recovery Manager is accessible from the start menu. But it may not be accessd in the Start Menu on my Windows 10 system! I have not tried this recently, but can I still access it by pressing F11 immediately after the passage on my PC?

  More importantly, can I still reset my PC to factory settings using the HP Recovery Manager, now I have 10 windows? Otherwise, I might as well delete the HP recovery partition to free up space...

  Sheri52

  Thanks for the reply.

  While Microsoft says there is no risk in the upgrade of Win10, because they allow you to believe that you can always return to your BONES and the original installation program within 30 days, the ugly fact of the matter is that the Win10 GoBack feature turned out to be unreliable - and when she fails, she can let machines in a State corrupted - that does not always happen , but it happens often enough to be a problem and you will get no warning beforehand that he goes to the trash your PC!
  
  If this is not enough, the Win10 upgrade is known, in some cases, corrupt partition recovery stored by the OEM that built the original machine. It's pretty much guarantee that no HP recovery will work: http://h30434.www3.hp.com/t5/Desktop-Video-Display-and-Touch/HP-Recovery-Manager-Blocked-After-Windows-10-Upgrade/td-p/5170752

  So, basically, the recovery partition won't do you no good now - you may remove as well.

  However, I highly recommend that you plan to use a third party to make a backup image of your PC, known as Macrium Reflect.

  Macrium reflect (MR) provides a FREE version that can be used to image and restore partitions or drives together: http://www.macrium.com/reflectfree.aspx
  
  What I recommend is the following:
  (1) download and install Macrium reflect (MR)
  (2) run M. and choose the option: "Create an image of the partition (s) required to backup and restore Windows" to write a full backup to an external drive or USB key
  (3) use the option to create a CD or a USB startup key
  
  My experience is that SIR, when you use the option of Compression high, typically allows to compress the image file recorded at about 50% of the space USED in the OS partition. This means that if you have a 40GB and 80GB OS partition is used, MR must only about 20 GB to store the image file.
  
  I use all the time and it usually takes less than 10 minutes to make the backup of the image and at the same time or less do a restore.
  
  In addition, MR has the ability to add a recovery Boot Menu entry. This then allows you to boot into Windows re, and then you can use it to do a restore - when you cannot start Windows!
  
  NOW, you have the means to restore a full system that works for the external hard drive or USB key in a few minutes.

  Good luck

• Pavilion 500: Hp Support Assistant update problem

  I have two updates to do bu, I can't. I can download them, but I can not install them. And there is no error etc. What should I do?

  

  Looks like some software of application/is using the drivers or the drivers to stop updating. You may need to update manually:

  http://support.HP.com/us-en/document/bph07165

• Pavilion 500-413nl: which download to choose?

  Hi all

  My question is very simple: what download, among the ones available on this page, choose to download and install to my PC? I see that some of them, like AMD, are not applicable, my PC is not an AMD graphics card.

  So, what should I do?

  Hi there called @andy-a,.

  Welcome to the Forums of HP Support!  I understand that you are looking for some guidance as to what software/driver, you need to install on your system. I'm happy to give you a helping hand with this.

  Your computer has been upgraded to Windows 10, or did you do a clean installation of Windows 10 later?  If this is an upgrade of an existing installation of HP, you can still use the

  HP Support Assistant, HP PCs - using HP Support Assistant (Windows 10, 8, 7). He must search and display updates are available depending on what hardware is in your system.

  Please let me know if it works for you and if it does not solve your problem, please mark this message as a solution. Bravo would be appreciated as well.

• Satellite Pro A10 PSA15E: update BIOS to use 160 GB HARD drive

  Hello

  I recently bought a second had Toshiba A10 Pro model reference PSA15E-03U82-EN. I was not able to upgrade the disk hard the 40gig towards a 160gig that I have, but it seems that I need to have the original BIOS boot disk to do this.

  How do I keep it? Can I download it and create my own?

  Thank you very much

  James
  [email protected]

  Hello

  If I understand you just upgrade you the BIOS to be able to use the 160 GB HARD drive in your notebook

  Unfortunately, this is not possible. Of course, you can upgrade the BIOS, but this will not help using the 160HDD.
  The BIOS supports a simple limitation of HARD drive and update will not help.

  The laptop supports load 20 GB, 30 GB, 40 GB or 60 GB HARD drive. Maybe you can use also a 80 GB HARD drive but I think that the 160 GB is simply too.

  I hope I could give you clearly

  Best regards