Whenever I turn on my computer, it starts in a marlett font.

Similar Questions

• How can I get Firefox opens automatically whenever I turn on the computer?

  How to get Firefox opens automatically whenever I turn on the computer.

  You can place a shortcut to the Firefox program in the startup folder in "start > programs" by dragging the Firefox shortcut from the desktop or by dragging the Firefox entry in ' start > programs > Mozilla Firefox ' in this folder (or use copy/paste to achieve).

• Whenever I turn on my computer, I get "Sqlite3.dll is not found."

  Original title: "Sqlite3.dll is not found."

  Whenever I turn on the computer. Once the desktop screen .it's a message "this application has failed to start because sqlite3.dll is not found. reinstalling the application may fix this problem".but the computer still can run that I don't know what was wrong and how can I fix this please?

  I'm not leaving your system works in selective startup mode, because that would leave you with a sloppy XP configuration.

  You must find the faulty startup item and get rid of it.

  Here's how:

  It is sometimes easy to get rid of the error message by doing something like disable the startup item in msconfig (if you can still find), but I suggest you fix the problem and difficulty not only the symptom of the problem by simply deleting the startup message.

  I would also not recommend you start digging in the registry to try to find the startup item and remove it unless you have a backup of your system or at least a backup of your registry, because there is no 'Cancel' or 'quit without saving changes' option in regedit.  If you make a mistake, that's all.

  These ideas relieve 'rapid' and sometimes risky of the symptom if they not even work at all, but they can't actually solve the problem.  Also, I'd be suspicious of ideas that begin with the words "try."  You don't need to try things, you need to fix things.  You don't need to try ideas that might work, you must do something that will always work all the time.

  Here are the detailed instructions that protect you and solve your problem in the 'right' way.

  There is very little. DLL files that should be loaded from the C:\WINDOWS folder and is not one of them.  If you do not have a good explanation for the name of the file in a Google search, the chances are good that your system is currently or has been infected by malware.
  A "Cannot find...". ', ' Failed to start..., "Could not load..." ». "Might not work... "" Cannot run ""error loading... ". "or"specific module could not be found"message at startup is usually related to the malware that has been configured to run at startup, but the referenced file has been removed after a malware scan, leaving behind him a startup item or the registry entry pointing to a file that does not exist.
  It might be a removal of malicious software or an application not installed.  The entry may have a curious looking name since it was probably generated at random when the malware was installed. If you search your system for the referenced file, you may not find.
  Windows attempts to load this file but cannot locate because the file has been deleted for most probably during an analysis of the malware. However, an orphaned associate of remainders of startup parameter or registry entry and tells Windows to load the file when you start or connection.
  So you should delete the referenced entry Windows stop trying to load or run the file. It may or may not be included in the registry, but you can find it.  Autoruns (see below) you get the elements no matter where it is.

  You must be sure to solve the problem and not just fix the symptom of the problem by simply relieving your message - system is not a fix (there is a difference).

  If you just locate and uncheck the item in msconfig, which disables the element but does not remove the reference to the element of false starting your computer.   The msconfig program is not a Startup Manager, that's a troubleshooting tool.  Disabling things in msconfig to put an end to the messages and think that your problem is solved is short-sighted and leave behind him a sloppy XP configuration.  Just disable the display of a start-up error message should not count as a 'solution' to the problem.
  If you are comfortable editing the registry, you can find and remove the reference directly from there or remove it using a popular third-party tool called Autoruns.  The problem can always be found in the registry well.
  Before making any changes to your registry by hand or with third-party tools, don't forget to first make a backup of the registry
  . There is no cancellation or exit without saving the option in regedit.
  Here is a link to a popular registry backup tool:
  http://www.SnapFiles.com/get/ERUNT.html
  You can also use the Autoruns to find the element of start remains little matter where he's hiding.  Autoruns does not install anything on your computer.  It will display all startup locations where the reference may be then you can turn it off or remove it completely.  Here is the download link for Autoruns:
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Run Autoruns.exe and wait that he at the end of the filling of the list of entries.
  When the Autoruns is finished scanning your system, it will say "Ready" in the lower left corner. Autoruns can be a little intimidating to first if you have never seen it before because it displays a lot of information.  You are really interested only a few sections.
  The problem is usually to start the system or the user startup entries, then click the connection tab and see if the startup item is there.
  Scroll through the list and look for a boot entry associated files in the error message.
  If you can't find on the connection tab, look in any tab.
  You can also click file, search to search for logon, or any tab for all or part of the name of the element.
  Right-click on the offending entry and choose Remove.  If you are not sure what it is, you can simply turn off (uncheck the entry), reboot, and if the problem is resolved and things work normally and everything works fine, then delete the offending entry.  If you don't see it in Autoruns, you may edit the registry and remove the item from your startup folder it.  Autoruns shall display the same information however.
  Given that your system has or has had an infection, follow up with this:
  Perform scans for malware, and then fix any problems:
  
  No matter what you use for malware protection, follow these steps:

  Download, install, update and do a full scan with these free malware detection programs at:
  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
  They can be uninstalled later if you wish.

  In 1985, there were 11 known computer viruses.  Today, there are over 70,000 and new threats are detected every day.  Always update your virus definitions before running a scan.

  Restart your computer and solve the outstanding issues.

• How can I get rid of the configtool.exe whenever I turn off my computer?

  How can I get rid of the configtool.exe whenever I turn off my computer?

  Hi Mark,

  ·         You have a Palm PDA connected to the computer?

  configtool.exe process is multi configuration tool - user which is used on Palm PDA or personal digital Assistant devices.

  It would also be possible that certain types of malicious files tend to hide as long as the process of configtool.exe to infiltrate your system.

  Method 1: You can run the Microsoft Safety Scanner to check the infection by the virus. Check out the following link.

  Microsoft Safety Scanner - free online tool for PC health and safety

  Method 2: Start the computer in safe mode and check if the problem persists.

• Windows defender is stopped. whenever I turn on my computer. setting has been activated automatically, but a message "windows defender is disabled" keep appearing one whenever I click on it. Help, please. Thank you!

  Windows Defender is disabled whenever I turn on my computer. setting has been activated automatically, but a message "windows defender is disabled" keep appearing one whenever I click on it. Help, please. Thank you!

  If you have Microsoft Security Essentials or AVG installed, you don't have to do a thing. These 2 are supposed to disable Windows Defender, because they have their own "defender". Running two defenders would conflict on the other and redundant.

  If you have not installed 2 above. Try this...
  Start bittun > in the search box, type services > press ENTER > uac prompt > scroll down and look for Windows Defender...
  under the State ; It must be said Started
  under Startup type : must say automatic
  If this isn't the case, right click on Windows Defender > properties >
  under the change of automatic startup type to
  under service status to start editing
  Click OK.

  t-4-2

• Whenever I turn on the computer, my clock is wrong.

  Whenever I turn on the computer, my clock is wrong. I installed Windows7 in November, but this only started happening after the new year. When I change the time display, it only changes the time on the screen. not on the clock display computer. And when I turn the screen clock is wrong again; It corresponds to display the time of the computer again.

  battery from motherboard is dead I think. then, at some point, you have lost power to reset the bios clock. Restart the computer in your bios (delete seems to be a popular key for that these days, but it is f2 or f12 or f10. depends on your Board) and change the bios settings of the clock (I bet that the date is off also) then turn it off, pull the plug, count to 15, and repeat. If the bios clock wrong again then your battery is dead. If it is correct, you have a different problem.

• Whenever I turn on my computer I get a box that pops up and say "Update: there is an error during installation." Please reinstall the application.

  Whenever I turn on my computer I get a box that pops up and say "Update: there is an error during installation." Please reinstall the application"How can I do this?

  Original title: when I turn on my computer

  You should consider carefully as pop - up and determine what application has a problem.

  If he has no idea anywhere in the pop - up, first physically disconnect your computer from the Internet (because in the following steps, you will temporarily disable your antivirus software).

  • Click Start and type "msconfig.exe" (without the quotes) in the search box and press ENTER.
  • When the "System Configuration" window opens, select the tab "start".
  • Uncheck the half of the listed items (for your convenience, click on "Startup Item" in the column header to sort the items alphabetically)
  • Click OK and restart (click here to avoid the warning that you are in a diagnostic mode)

    If the pop-up warning does NOT appear, the problem application has been one of the items you unchecked.  If this is the case, reopen the System Configuration and check again half of the elements that had checked you.

    Similarly, if the pop-up warning appears, then the application problem is that remained turned on. In this case, open the Configuration of the system, again check the items that you had disabled, then uncheck half of the remaining items.

  • Restart and continue the process until you have identified the problem application.
  • Once you have identified the problem application, open System Configuration once more, select "Normal startup" on the "Général" tab and restart.
  • Do not forget to reconnect your computer to the Internet
  • Uninstall or reinstall the application issue.

• How can I prevent a program to display automatically whenever I turn on my computer? Spotify doesn't it.

  All started to use Spotify. Whenever I turn on my computer, the screen of Spotify launches. Can I change this so that it only start when I click the icon?

  This is the place to go for more information about Spotify.

  See this:

  http://community.Spotify.com/T5/help-desktop-Linux-Mac-and/remove-from-startup/TD-p/16075

• Whenever I turn on my computer I got the message that C/users? Linda? AppData/Roaming? kaupe.dll is missing. I ran malwarebytes and it found nothing. How can I fix it?

  Whenever I turn on my computer I got the message that C/users? Linda? AppData/Roaming? kaupe.dll is missing.  I ran malwarebytes and it found nothing.  How can I fix it?

  May be the remains of malicious programs. Go to start/run type msconfig. Look under Startup. If this entry is here, there uncheck and then restart your computer

• Whenever I turn on my computer windows live messenger lights! How can I stop this?

  cancel the contract

  
  

  I wish that my contract cancelled now! whenever I turn on my computer windows live messenger lights! I have not more contract. she resumed.

  Hello

  What contract? You must communicate with who you let any contract.

  Windows Live has its own Support and Forums for help with any problems.

  Windows Live Solution Center
  http://windowslivehelp.com/

  Windows Live Messenger - Support
  http://windowslivehelp.com/product.aspx?ProductID=2

  Windows Live Messenger
  http://windowslivehelp.com/forums.aspx?ProductID=2

  I hope this helps and happy holidays!

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• How can I get calendar reminders Works will automatically appear on my desktop whenever I turn on my computer?

  I did this on my last computer but do not remember how I did it-program calendar reminders Works will automatically appear on my desktop whenever I turn on my computer?

  Hello

  The initial response is no longer valid because these focus groups were dissolved.

  Now -> Check with the Experts to work in the answers - work Forums

  Answers - Forum work
  http://answers.Microsoft.com/en-us/Office/Forum/office_other

  =========================

  Original - response is no longer valid.
  
  Ask the Experts work here:

  Discussions in microsoft.public.works.win
  http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.works.win&cat=en_us_9804e2ac-c762-44C9-9c6f-90e45f32d772&lang=en&CR=us

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• whenever I turn on the computer, it goes to the Startup Repair, any ideas

  whenever I turn on the computer, that I do about 5 times, then it goes to the Startup Repair, any ideas?

  Hi Jim,.

  In addition to the advice given above, I would recommend looking at the following thread:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-system/everytime-i-turn-on-the-computer-startup-repair/21348aa7-FA71-E011-8dfc-68b599b31bf5

• I turned on my computer & it started making this strange buzzing

  Original title: weird buzz...

  I turned on my computer & it started making this strange hum. The only time where I do not that is that if I turn my volume to zero.
  Mute does not work... I don't hear anything, except the buzzing, even when you watch videos or play music... I checked my sound card, & my
  the computer is updated. It was working fine yesterday... :/

  I turned on my computer & it started making this strange hum. The only time where I do not that is that if I turn my volume to zero.
  Mute does not work... I don't hear anything, except the buzzing, even when you watch videos or play music... I checked my sound card, & my
  the computer is updated. It was working fine yesterday... :/

  I get the same thing on a windows 7 X 64 system. It's pretty boring. What is find a solution?

  I got it fixed! I uninstalled my speakers, and then shut down my computer. I turned it on the computer reinstalled the sound and the hum disappeared. (:

• Whenever I turn on my computer there is always an icon of "ready to install update" showing. What are these updates and why so many?

  "When I turn off my computer, I have an icon of" ready to install update "in the upper right of the button 'disable' located between the"stand by"and"restart"buttons. In the past, I would occasionally get one of these notices, but now they happen whenever I'm on the computer. What are these updates and why they are so common and if they pose a threat to my computer?

  Hi Michael,

  Try the following.

  Step 1: Check if there is lack of updates.

  a. click Start, click all programsand then click Windows Update or Microsoft Update.

  b. on the Windows Update Web site or on the Microsoft Update Web site, click view update history. A window opens that displays the updates that have been installed or that have failed to install on the computer.

  (c) in the State of this window column, find the update failed to install and then click on the red X. A new window opens that displays the installation error code.

  d. Note the error number. (If any).

  Step 2: reset Windows Update components and then install updates. Visit the following link and click on Fixit.

  How to reset the Windows Update components?

• 'C:\Windows\System32\winrnr.dll is not designed to run on windows or it contains an error' whenever I turn on my computer

  Hello

  My computer was freezing whenever I turned it on in normal mode. It is also frozen when I turned it on in SafeMode with network. After that, he would not be able to start up. At one point, I was able to boot into safe mode and do a system recovery to an earlier point in time that I tried it and it worked. I am now able to boot into normal mode. But whenever I start my computer, I get this error message:

  "C:\Windows\System32\winrnr.dll is not designed to run on windows or it contains an error...". »

  I want to assure you that I can solve this problem. Can you help me? Is this a Vista problem? This would resolve if I installed Windows 7. I was already thinking to do this...

  Thank you!

  Replace damaged files by your Vista DVD files:

  http://blog.NirSoft.NET/2009/09/17/how-to-extract-missing-system-files-from-the-DVD-of-Windows-7vista/

  "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/