Where is file stored on your computer when you use: File.applicationStorageDirectory

Similar Questions

• What happens to your computer when you compress your old files when running disk clean

  What happens to clean your computer when you compress your old files when running disk?

  Why is it you would compress the files while running a cleaning disc?  http://www.help2go.com/Forum/computer-help/105414-compressing-old-files-disk-cleanup.html

• Error: Failed to setup of the Windows updates. Restoration of the changes. Do not turn off your computer when you try to install Windows updates

  I got an error message in step 2 of configuring updates - "updates were not correctly configured.  Returning from changes' anyone can help solve this problem?

  Error: Failed to setup of the Windows updates. Restoration of the changes. Do not turn off your computer when you try to install Windows updates
  http://support.Microsoft.com/kb/949358

• How do you rename your computer when you buy it second part?

  I just bought my computer from a friend and I want to remove his name off computer.  I tried to do it by changing its name in user accounts, but his name remains.  How can I put my name as the original owner?

  Hello jeep62,

  One who installs Windows, the installation program asks you to enter your name and optionally, the name of the organization. These registration information appears under recommended for in the general tab of the System when you click Start, click Control Panel, click performance and Maintenanceand then click System.

  THEN:

  1. Click Startand then click run.
  2. In the Open box, type regedit, and then click OK.
  3. Look for the following registry key:
     HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion
  4. To change the name of the company, follow these steps:

     In the right pane, double-click RegisteredOrganization. Under value data, type the name that you want, and then click OK.

  5. To change the name of the registered owner, follow these steps:

     In the right pane, double-click RegisteredOwner. Under value data, type the name that you want, and then click OK.

  6. Click Exit on the file menu to exit the registry editor.

  Hope this helps you. Let us know anyway. Make it a great day!

  "In the end the love you take is equal to The Love You Make" (The Beatles last song from their latest album, Abbey Road.)

• Unable to restart your computer when you try to configure my PC back to factory settings.

  So, recently I tried to reset my laptop to factory settings, but it says:

  Cannot restart your computer
  Windows cannot restart the computer in the Windows recovery environment to complete the restore.

  Maybe its weird, but that's exactly what he said. I have no idea what this means? I could get help :)
  Thank you.  -Nicolai

  Try to start again in the recovery environment, then launch a reset:

  New computers that come pre-installed with Windows often have what is called a recovery partition. This is used to reinstall an operating system in the case of a system failure. To access it, you need to start when you start your computer by pressing a function key. This can be either F1, F2, F9, F10, F11, F12 key DEL or tab. See the manual that came with your PC for instructions on how to reinstall Windows.

  This is how the recovery partition is accessible to most popular brands...

  For Dell, press CTRL + F11 directly after switching on the device

  For HP, press F11 directly after switching on the device

  For LG, press F11 directly after switching on the device

  For Toshiba, press and hold "0" BEFORE and during the power upward

  For Acer, press and hold ALT + F10, as soon as you see the logo

  For Asus, press F9, as soon as you see the Asus logo.

  For Samsung, press F4 to the power upward...

  For Fujitsu, press the F8 key directly after the power

  Advent, restart your computer. Then, press F10 repeatedly until the message "Starting system recovery"

  Sony VAIO, reboot and press "F8" or "F10" repeatedly until the screen "Advanced Boot Options".

• "This operation has been cancelled due to restrictions in effect on this computer" when you use "Windows key + R.

  Original title: when I press the WINDOWS KEY + R runwindow opens & a massage said "THIS OPERATION has BEEN CANCELLED due to RESTRICTIONS IN EFFECT ON THIS COMPUTER. PLAESE CONTACT YOUR SYSTEM ADMINISTRATOR.

  After a Virus attack, I have a lot of problems such as help & does not support opening, Manager tasks doesn't work do not run applications does not, microsoft Security Center doesn't work don't not etc...

  can someone help me with this issue please?

  Hi Parth1004,

  1. you are the administrator of the computer?

  2. the computer is on a domain network?

  Follow the suggestions below for a possible solution:

  Method 1:

  Step 1: Start in safe mode and check if the problem persists.

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

   

  Step 2: If the problem does not occur in safe mode, you can put your system to boot (in normal mode) to solve the problem.

   

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

   

  Note: After troubleshooting, be sure to configure the computer to start as usual as mentioned in step 7 provided in the above article.

  Method 2: I also suggest that you scan your computer with the Microsoft Security Scanner, which would help us to get rid of viruses, spyware and other malicious software.

  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

   

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Important: During the scan of the hard drive if bad sectors are found, the scanner tries to repair this sector, all available on which data may be lost.

  Let us know the results.

• Scanner (Officejet 7500) cannot find the computer when you use shortcuts scan to printer

  When you choose Scan to PDF, e-mail, etc., by using the scanning on the 7500 buttons it allows me to select the computer on the network (each with all of the latest drivers and software loaded). However when about to the scanner and then says the computer is not found (whatever the) despite them being on and ready. Scanning by any other method of the Mac works. Automator shortcuts work very well during the tests, but they do not seem to get initiated by the scanner for scanning form of initiation of the printer itself.

  Research on the support site HP and conclusion - a 'connection error' or "Computer no. detected" Error Message displays when trying to Scan from the printer control panel - as a subject gives PC solutions, but nothing for Mac. And so here I am. Help!

  JKB

  The next thing to check is that "HP Device Monitor" is running.  This background process is responsible for detecting the keys for scanning applications.  If you open the activity monitor (located in/Applications/Utilities) you should see this class as one of the running processes.

  It may be generally preferable for you to perform an uninstall and reinstall the HP software.  You will find in Applications/Hewlett-Packard HP Uninstaller.  Use this utility to remove the old software.  I recommend that you download and install the latest version of the software for your 7500 here: http://tinyurl.com/4voly2d.

  Hope this helps,

• "" Se error message "No. DVD player has been detected on your computer" when you try to insert DVD

  Original title: DVD and CD Driver problems and do not know what to do! I need help...

  My dvd drive is not detected. For example, when I insert a cd, I can hear it running, but it is not bring up windows media player or DVD does not play. I ran a fixed and got Player error: No. DVD 2 was detected on the computer, and 2nd mistake was this player Windows Media can not be placed in properly and may not work as expected. He told me that the two problems are not fixed. I also follow steps start clicked then clicked on computer and then under duct only showing local disk C: and hp recovery D: I do not see a DVD or CD drive. Please help me it is frustrating.

  Hello

  
  1. what fixit did you run?
  2. were there any changes (hardware or software) to the computer before the show?
  3. What is the status in Device Manager?
  
  Run the FixIt mentioned below, if you have not tried and see if it helps.
  http://support.Microsoft.com/kb/314060
  http://support.Microsoft.com/mats/windows_media_player_diagnostic
   
  Hope this information helps.

• How do you get access to your computer when you forgot your password and hint question

  My mother did not use his computer for a while and forgot his password and hint question. Is there anyway to get into the computer without them? She has a Toshiba laptop with Windows Vista installed on it.  Thank you.

  Hello

  I'm sorry, but the strategy of microsoft in these forums is that without assistance will be given about lost or forgotten passwords

  read the policy at the link below

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-security/keeping-passwords-secure-Microsoft-policy-on/a5839e41-b80e-48c9-9d46-414bc8a8d9d4

  I suggest you reinstall vista

• U2312HM monitor is not recognized by my computer, when you use the USB cable

  I have a Dell XPS L702X running on Windows 7 Professional.  When I connect it to my Dell U2312HM monitor (using the USB cable), does not recognize it at all.  My monitor has a mistake about it, saying: now the VGA cable.  When I try to select the input Source, USB isn't even an option.  I tried to change the ports on my laptop, reboot with the connected monitor, making sure that all the cables are properly inserted.  Nothing seems to work.  Any help would be great.

  Thanks in advance,

  Daniel

  Daniel_hicks1,

  You've lost me. You try to send a laptop computer VIDEO signal in the monitor through a USB cable? If so, it will not work. USB upstream cable connects from the monitor to the computer to activate the USB ports monitor downstream. To get the video from the laptop to the display, you must connect the VGA, DVI or DP of the monitor cable to the laptop.

• How do eject you safely your iPhone when you use photo app

  Using the new OS El Capitan 10.11.1, in the Photos app, how do eject you safely your iPhone

  AB2H,

  Read the excellent advice provided by leonie in how "eject you" a camera or such a device of the photos app after import?

  

• Where are the models of 'New project' when you use Visual Studio with labwindows/cvi 2013 2012?

  Background:

  Platform: windows 7 X 64

  Visual Studio 2012

  LabWindows/cvi 2013

  First install Visual Studio 2012.  Then follow this installation Labwindows 2013.  In the installation options, I check 'visual studio 2010' (there is no option for VS2012).

  Question: After the installation of Labwindows, I expect to see patterns added to the "New project" dialog box in Visual Studio.   For several years I used labwindows.  Changed the method for using Labwindows with visual studio?

  Thanks in advance for any help.

  Hello jsut64,

  Unfortunately, there is no option to integrate with Visual Studio 2012 yet LabWindows/CVI. We plan to add in a future release.

  Best regards

  = Nelu F. | National Instruments.

• The files and settings to remove the old computer when you make a file and the transfer settings Wizard?

  The files and settings to remove the old computer when you make a file and the transfer settings Wizard?

  Hi KaraDay,

  When you use the files and Settings Transfer Wizard in Windows XP, it only transfers a copy of the files and settings on the computer.

  How to use the "files and Settings Transfer Wizard" in Windows XP

  http://support.Microsoft.com/kb/293118

• When you use Adobe CreatePDF desktop printer where the files go?

  When you use Adobe CreatePDF desktop printer where the files go?

  The CreatePDF desktop printer is removed. Please visit https://forums.adobe.com/docs/DOC-5131 for more information.

• New installation of Windows 7 Ultimate, computer loops and again: "the installation program prepares your computer for first use.

  I'm running Windows 7 Ultimate on my Toshiba Tecra A4-S211 and provided that the installation went, it seemed that took place without incident; except that when I try to start windows I see: "Starting windows" followed by "Setup prepares your computer for first use" that is displayed for about 3-5 seconds and then it restarts and displays abruptly: "cannot start Windows. A recent hardware or software change might be the cause. "I tried the safe mode, but also"last known good configuration"and I get the same results. Finally, I tried the repair function on the installation disc and says am Startup Repair is unable to repair the computer automatically, where then I click to send information to Microsoft to be told that if I had all the devices attached like a camera or portable music player to remove them and restart. I have nothing set, no flash player or anything.
  I tried to do all the steps above a dozen times each, and the results are consistent, except that the start of repair is sometimes said that there is nothing wrong with windows. Here also to point out that I had XP running on it before without problem and I tested the DVD on another computer and it worked.

  Hi Austin,.

  You can try some of them in Mode safe - tap F8 repeatedly that you start.

  If you do not have a Windows 7 disc, you can borrow a friends because they are not a copy
  protected. The manufacturer of your system will also sell the physical DVD cheap since you already
  Clean Windows. You can also do an ERD on another computer.

  Try the Startup Repair - (if at anytime, benefit you from some, but not full access coming to Windows
  return and then try to startup repair.)

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  What are the system recovery options in Windows 7?
  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

  Try the disk Options recovery or Windows 7 startup repair.

  How to run a startup repair in Windows 7
  http://www.SevenForums.com/tutorials/681-startup-repair.html

  Also from the command PROMPT on the Console (if possible) recovery or a Windows 7 disc

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Then run checkdisk (chkdsk).

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  Retry After Chkdsk startup repair.

  If after those you can try the system restore to fashion without failure or the valuation or Windows 7
  disc.

  How to do a system restore in Windows 7
  http://www.SevenForums.com/tutorials/700-system-restore.html

  --------------------------------------------------------------------

  If you need to repair disks - these help repair Windows not re-install.

  How to create a Windows 7 system repair disc
  http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

  ======================================

  If necessary:

  What to do if Windows does not start correctly
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-to-do-if-Windows-wont-start-correctly

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  What are the system recovery options in Windows 7?
  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

  How to do a repair installation to repair Windows 7
  http://www.SevenForums.com/tutorials/3413-repair-install.html

  Follow the steps in this link as well.

  http://support.Microsoft.com/kb/2674065#Method2

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-system/Windows-failed-to-Starta-recent-hardware-or/8dad59b9-A08D-4cb8-8ddf-1c164b7caf65