Where is Merge with similar lines?

Similar Questions

• Line 1 columns do not merge with Row 2 columns in InDesign Script

  It is my code: -.

  var myTableFrame.insertionPoints = myTable [0].tables.add ({columnCount:3, headerRowCount:1, bodyRowCount:2});})

  myTable.rows [0] .cells [0] .silence = "A";

  myTable.rows [0] .cells [0].merge(myTable.rows[1].cells[0]);

  But:-below the job line: -.

  myTable.rows [0] .cells [0].merge(myTable.rows[0].cells[1]);

  myTable.rows [1] .cells [0].merge(myTable.rows[2].cells[0]);

  
  

  ------------------------------------------------------------------------------

  Problem is that column 1 & 2 of the fusion of line 1

  and the column 1 row 2 & 3 fusion

  but, to the column 1 rank 1 & 2 fusion has not and no column of row 1 merger with column of line 2

  Can someone help me please...

  Thank you...
  

  Problem solved: -.

  1. we cannot merge with bodyRow headerRow columns...

  2. we can merge with headerRow headerRow columns...

  3. we can merge with bodyRow bodyRow columns...

  In the case of line 1 should be used below line: -.

  var myTableFrame.insertionPoints = myTable [0].tables.add ({columnCount:3, headerRowCount:2, bodyRowCount:2});})

  OR

  var myTableFrame.insertionPoints = myTable [0].tables.add ({columnCount:3, bodyRowCount:3});})

• Merge only one line on several lines

  I need prepare a merge statement that merge only one line in a table. Here is the table definition, data instruction and fusion sample, I used.
  

        CREATE TABLE Mob_Attr (NAME VARCHAR2(20), ATTR_1 VARCHAR2(20), ATTR_2 VARCHAR2(20), ATTR_3 VARCHAR2(20));
        CREATE TABLE Mob_Desc (NAME VARCHAR2(50), ATTR_1 VARCHAR2(20), ID NUMBER(20));      
        CREATE TABLE Mob_Main (NAME VARCHAR2(20), ATTR VARCHAR2(20), ID VARCHAR2(10));     
        
        insert into Mob_Attr(name, attr_1, attr_2,attr_3) values ('n1','aa',null,null);
        insert into Mob_Attr(name, attr_1, attr_2,attr_3) values ('n2','bb',null,null);
        insert into Mob_Attr(name, attr_1, attr_2,attr_3) values ('n3','cc',null,null);
        insert into Mob_Attr(name, attr_1, attr_2,attr_3) values ('n4','dd',null,null);
        
        insert into Mob_Desc (NAME,ATTR_1,ID) values ('n1','aa',10);
        insert into Mob_Desc (NAME,ATTR_1,ID) values ('n1','aa',15);
        insert into Mob_Desc (NAME,ATTR_1,ID) values ('n1','aa',123);
        insert into Mob_Desc (NAME,ATTR_1,ID) values ('n1','aa',1455);
        insert into Mob_Desc (NAME,ATTR_1,ID) values ('n2','bb',455);
        insert into Mob_Desc (NAME,ATTR_1,ID) values ('n2','bb',135);
        insert into Mob_Desc (NAME,ATTR_1,ID) values ('n3','cc',15);
        insert into Mob_Desc (NAME,ATTR_1,ID) values ('n3','cc',52);
        insert into Mob_Desc (NAME,ATTR_1,ID) values ('n4','dd',1455);
        
        merge into Mob_Main ma using
        (select d.name, d.attr_1,d.id from Mob_Attr a, Mob_Desc d
        where a.name = d.name and a.attr_1 = d.attr_1
        ) q on (ma.name=q.name and ma.attr=q.attr_1)
        when not matched then
        insert (NAME,ATTR,ID)
        values (q.name,q.attr_1,q.ID);
        

  Merge statement above will actually merge complete data. But I want that the first line will only get inserted to the base table (Mob_Main). If we take the "n1" name first row in the table with the ID Mob_Desc '10' should get only inserted. I go for a cursor to do what I have given huge volume, I prefer the merger instead.

  MERGE INTO Mob_Main ma
       USING (
                SELECT distinct d.name, d.attr_1, first_value(d.id) over (partition by d.name, d.attr_1 order by d.rowid) id
                FROM Mob_Attr a, Mob_Desc d
                WHERE a.name = d.name AND a.attr_1 = d.attr_1
               ) q
          ON (ma.name = q.name AND ma.attr = q.attr_1)
  WHEN NOT MATCHED
  THEN
     INSERT     (NAME, ATTR, ID)
         VALUES (q.name, q.attr_1, q.ID);
  COMMIT;
  
  select *
  from Mob_Main
  order by name, id;
  
  NAME                 ATTR                 ID
  -------------------- -------------------- ----------
  n1                   aa                   10
  n2                   bb                   455
  n3                   cc                   15
  n4                   dd                   1455      
  
  4 rows selected.
  

• How to create the new library of Photos to iCloud without it merging with the former?

  I started my iCPL in January 2015. It is now 104 Gb/8000 photos. In a year I need to upgrade my plan of storage iCloud.

  So I think I would make the existing one a regular photo library, and start a new photo library iCloud.

  If I start a new library now and make the iCPL, merge it with the existing iCPL. I want to replace the existing in iCloud.

  I could do (I think): -.

  1. make the existing a non-iCPL and rename it.

  2. create a new lib Photos and make the library system iCloud.

  3. the new library (empty) will download and merge with the former in iCloud, so it contains now 8000 photos of the original lib.

  4. delete all the 8000 photos in the new.

  5. start put new photos in the photo library now empty iCloud.

  Is there a better way? I do it too difficult?

  I can see what I've described above taking a long time to settle on all devices, even if I can avoid 30 day waiting by removing the deleted record recently.

  Thank you

  You use "Optimize Mac Storage" on your Mac? Then, you will need to make sure that all the photos to download to your Mac before you copy your current library corresponding to your backup disk and start deleting iCloud.  Is there enough free storage on your Mac to do this?

  I would also like to than my thin iCloud library. My iCloud library has only my favorite photos of many years, I want on all my devices as well as the most recent photos that I'm still trying. Because the iCloud library must be the library system, only in iCloud library photos are available in the media for other applications browser, so I keep all the photos here that I can use in other applications.

  What I do to save bandwidth and download time is to have two libraries:

  1. A large library where I keep all the photos I want to keep - it's my photo archives. This library is on an external drive that is supported by Time Machine and is currently still an Aperture library.
  2. A smaller library iCloud in my pictures folder.

  I import new photos first to the iCloud library, remove all the bad moves that do not need archiving, then I export the originals at the library of the archives.

  And then I start editing the photos in the library to iCloud and learn by removing and keeping only the best photos.

• Qosmio G10 begins with vertical lines on the screen

  Hello, can anyone help?

  When I try to start my sign qosmio G10 comes on with vertical lines on the screen. And the screen goes black and I can only hear the fan.
  In VGA mode, it begins upward, but always with the lines on the screen.
  Is there something wrong with the video card? In my view, that there are more people with this problem.
  Toshiba offered little help?

  I'm 'out out of warranty '. I need to by a new complete motherboard or y at - it another option? Replace the video card?

  Hello

  Its a shame about the warranty because you ask the service partner Toshiba for the verification of the laptop and this procedure would be free. You know, the warranty would cover the audit of the laptop.

  But I would say the external display connection and then you can check if the same vertical lines appear on the external display.
  If you see the lines on the second monitor, then I guess it could be something wrong with the graphics card or motherboard.

  I think that this procedure is the best way to find out what could be the problem, but anyway, I think you should ask a technician for assistance if you want to solve this problem.

  PS: Have you tried to reinstall or update the graphics driver? I think you should do it but I don't know if it will help you, but you know Mr. try is free ;)

  One of my friends had a similar problem with the vertical lines on other mobile manufacturing, and it was a WLan cable which was responsible for the strange lines on the screen.

• 100 GB Vista full boot need to merge with the E drive.

  I have vista, my startup diskc: disk is full Iwant to merge the e drive?

  100 GB full Vista, 1 disk boot hard need to merge with the E drive part.  HOW?

  Hello

  What is the size of the E:Drive?

  E: drive may be the recovery disk to reinstall the OS, if there is between 5-15GBs.

  Do not touch, except to make the recovery of the disks.

  Here is the info on the recovery disks >

  Your recovery Partition was photographed on your hard drive during the production of your computer by the manufacturer for all of these reasons.

  1. to reinstall Vista from in the case of a failure of the system, based on individuals or the keys at startup.

  F10 or Alt + F10 or F11 are a couple of different manufacturers use sequences.

  You will need to ask your manufacturer for proper sequence.

  2. to make the recovery disks on if your drive hard breaks down, so that you can then reinstall the operating system on a new hard drive.

  Also ask them how to make records.

  Your D: or E: drive of recovery should not be used for backups, defragmented, etc..

  There are backups on an external hard drive.

  To resolve the problems that have arisen with the recovery D: Partition, you will need to contact the manufacturer of your computer to remove all that has been added to it.

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  If E: is not the recovery disc, with disc of Vista management you must use all the space of the E: drive, doesn't not part of the E:.

  See if this applies to your situation.

  Save all data on E: > E: remove > and then extend C: into the now unallocated space where E: was.

  "How delete and extend a Partition with Vista disk management"

  http://www.Vistax64.com/tutorials/95418-disk-management-delete-extend.html

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  You can use these methods to get space on your C: drive:

  http://Windows.Microsoft.com/en-us/Windows-Vista/delete-files-using-disk-cleanup

  http://www.Piriform.com/CCleaner

  Do NOT use the part of the registry of CCleaner.

  See you soon.

• BlackBerry Smartphones new icon on the screen circle - yellow with white lines with a 1 next to it - what is it please?

  Hello.

  News to hear so please bear with me...

  I had my blackberry for about a month and a new icon has appeared (alongside the message icon where normally). It shows a '1' next to a yellow circle with white lines through it... I have the feeling that it's to do with e-mail, but don't know what it is or how to get rid of it... I have no new messages to read...

  your help would be much appreicated.

  Concerning
  Sutton237

  Check your browser or WAP push messages.

  Messages folder > Options > folders, and then search for in your WAP push and push browser files.

  Read and erase the message.

• How to concatenate strings with the lines of a text file

  Hello
  I tried concatenate strings with the lines of a text file, but something is wrong with my code and I belive is the agruments I use in the cycle for. If anyone can help me I will appreciate it very much.
  My code is:
  [code]@echo off
  the value "input=C:\Users\123\Desktop\List.txt".
  for /f "usebackq tokens = *" % in (' input % ') do)
  the value 'str1 = C:\some directory\ ".
  the value ' str2 = %% ~ F '.
  the value "str3 = .pdf".
  the value "str4 = str1% str2% str3%.
  echo.%STR4%
  ) [/ code]
  and the text file is something like:
  121122 [code]
  122233
  123344
  124455 [/ code]
  But I get only one wrong answer and I have to run it like 3 times to get a real result and it is a mistake, the first two are empty spaces and gives the third one as the last line of the text file but repeated n times, where n is the number of lines in the text file.
  Result:
  [code] C:\Users\123\Desktop>concatenate.bat
  C:\Users\123\Desktop>concatenate.bat
  C:\Users\123\Desktop>concatenate.bat
  C:\some directory\124455.pdf
  C:\some directory\124455.pdf
  C:\some directory\124455.pdf
  C:\some directory\124455.pdf
  C:\some directory\124455.pdf
  C:\Users\123\Desktop>[/code]
  So if anyone has an idea about what is wrong please let me know.
  Concerning
  -Victor-

  Hi Victor,

  This forum is dedicated to the support of the Office of consumer Windows (fonts, colors, personal settings).  Since your question is about programming and usually outside the context of most of the customers, I suggest you post your question in the forums as http://msdn.microsoft.com - the Microsoft network to users will be more adapted to help you in your quest.

• Problem with animation line flicker/aliasing

  Hi I was wondering if anyone had any suggestions on trying to get this smoother animation and a little crisper.

  I know that the quality will be slightly less good in a gif format.

  https://S3.amazonaws.com/uploads.hipchat.com/115279/3089179/b6GFClDGSBHAucu/lines.gif

  Thank you

  Let me give you a few basics. These are things that are not considered by almost everyone that starts working in the video, especially those who come from a print or web design background. Photographers are also victims of a flaw in their knowledge which is understandable because they have never had to deal with things like this before. Here are the facts.

  First Point:
  Video (and everything that comes from digital displays) are always arranged on a grid of pixels. No exception. You can never put a line width of single pixel on this grid of pixels and do appear as a single pixel line, unless it lines up perfectly. Nothing that is not precisely aligned to the pixel grid is interpreted. It is called Anti-aliasing. This means that if your 1-pixel thick line is to halfway between grid display will be the average of the values in this row and you end up with a broad line of two pixels on the screen with each line taking half the value of the color of the original line. In other words if you are not precisely aligned on the grid of your 1-pixel wide black line becomes a 2px wide gray line.

  Second Point:
  Video is composed of images that reading at a particular rate. Your screen also has a refresh rate. Display rate standard in countries that have 60 Hz electricity usually have a refresh rate standard 60 Hz or multiples of a whole number of this rate divider. In countries where electricity is 50 Hz (Europe), the refresh rate is usually 50 Hz. The video frame rate for video in NTSC countries (most of the world) are normalized to 29.97 FPS (there's a reason associated with the problem of broadcasting TV signals in color, but I won't go into that right now). The Standard in PAL countries video frame rate is 25 fps. When you choose a frame rate for your video project which is not the frequency of standard images for your area, you may rate for your video come into conflict with the cadence of your screen. This can cause perfectly smooth motion judder and there is nothing you can do about it, except change the refresh rate of your screen or lift it up with a new high refresh rate capable display or change the frame rate of your video.

  Third Point:

  The average human eye and brain have a property called retinal retention. These effects how we perceive motion. No matter what you do, most people perceive incorrectly flexible movement across their field of vision. Most of the time the brain tries to iron out things and your eyes automatically try and follow this movement. This effect is well understood by the great directors when they block shots and the great directors of photography when they put cameras if your eye is directed to the part of the frame where they want that to get you to understand the history.

  Fourth Point:
  There is a strobe effect that applies to all the movements. For example, if you watch an old movie on TV western, you will sometimes see the wheels of the car rotate backwards. Smart of an airplane propeller video phone can show you that strange Sword-shaped blades turn slowly or even backwards. It's the interaction between pace and movement. The only way to create videos that shows the movement correctly and in the right direction is to match the query of the cadence.

  Fifth Point:
  Work around the fine lines, turning it into a thicker lines is to disable interpolation. You can do in After Effects by selecting quality draft. With quality lit project, you will always have a thick black line of single pixel. This solves a problem, but worse the other. The problem of the stroboscopic effect. To make your single pixel with black line SOUPLESE you must match the query of the line to the frame rate. You move 1 pixel by image or 2 pixels per image or 3 pixels per image or 4. You cannot move to 1.4 or 2.8 pixels per image. It won't wok, it would never work.

  Sixth Point:
  Even if you perfectly fit the pixel grid movement, you can still run on the retinal retention problem and frame rates. Every Director of professional photography with a value of his day rate knows that there are critical speeds of Pan - speeds during which you can not move the camera in a scene and offer a scene that doesn't pan and look terrible. Jerking can be so bad that it gives people headaches and worse. The frequency of images the more cautious, be with the camera. When the video cameras of 24 frames per second were introduced a whole bunch of people came back with horrible images. Shots that run at 29.97 work at 24. Cadence, retention of the retina, strobe effect and your brain combined with no fixed focal point for your eyes to focus on and track combine to fault up to the shooting and of the query.

  The solution:
  When you want to animate a thin line, you're better off at 29.97 frames per second that anything slower. 30 is OK if you go never broadcast or DVD to watch on a TV. You can use an expression to control the movement, so that your line moves exactly an even number of pixels per image. If your design requires that go you faster you must hide the problem with motion blur. If you want to lighten in and clear it of movement then you must hide the problem of aliasing with motion blur. Smooth long moves must be exactly to an even number of pixels per image. You have more options of speed at a higher speed. Even at a higher speed, you will encounter the problem of the sixth Point.

  The evidence:
  Any problem of smoothing by giving you the discount gray lines load the rendering of your lines animated in AE and step as part of an animation at the same time. Baring any cache image and to make the issues I bet that your animation will run without difficulty from one image to the other. It is only when the video plays back at speed that your eyes and your brain will tell you that the movement is uneven.

  Certain standards:
  Go to a cinema and watch the end titles. It takes about 7 or 8 seconds (depending on the height of the frame) for securities to roll from the bottom of the screen upwards. The second seven rule is pretty standard. With 29.97 FPS 1 video per image pixel, 2 pixels per image and 4 pixels per image work well enough for most applications. When you find a speed frame rate works for your video, it's the frame size and it is write it down. Use it again and again.

  This is an expression that works at the speed of the animation and allows blur to apply to your image. You can do the movement meet the markers if you want to start and stop. I have a bunch of preset animations that I use all the time for that style of animation.

  Bottom-up:

  t = time;

  en = t/thisComp.frameDuration;

  x = value [0];

  s = 4; Speed in pixels per image must be an integer

  y = value [1] - (fr * s);

  [x, y]

  Left to right:

  t = time;

  en = t/thisComp.frameDuration;

  y = value [1];

  s = 4; Speed in pixels per image must be an integer

  x = value [1] - (fr * s);

  [x, y]

  If you wish to reverse the direction, you can add a sign less in the final table or apply the term of anchor instead of position. These expressions take the initial starting position of the layer as a starting point. Both are moving to 4 pixels per image. To start and stop the movement, the simplest method is to split the layer, add the expression, let the layer move, then divide the layer again and delete the expression. If you are handy with expressions, you can bind the movement to layer markers, and then just move the markers for start and stop, or even reverse the direction of a single layer.

  If you don't want to mess with all those unbreakable rules then jack up motion blur and uses a higher cadence with thicker lines and hidden defects. There are no other solutions.

• How to draw a line (with the line segment tool) then draw another line, from those previous anchor point. When I try immediately draw another line on the other anchor lines it try to turn instead.

  I'm following a course of basic fundamental illustrator on Lynda. The video of "draw straight lines" is troubling me. They draw a line with the line segment and then draw another line coming out the anchor point at an angle.

  Here's where it is troubling me - when I try to drag a line to the anchor point trying to transform the first line, I drew. (the line cursor turns into a selection tool) I can't draw another line connecting the first.

  Advice would be great because it's driving crazy me.

  See you soon,.
  Kyle

  Yes, it is irritating. You must clear the previous line first. If you want to make sure that both ends are perfectly aligned, start by turning on the guides. If you want two lines to be part of the same way, you should use the tool pen instead.

• In Adobe Flash CS6, I have a blue box appearing around lines drawn with the line tool (and other tools like the brush etc.). I can't understand how to disable.

  In Adobe Flash CS6, I have a blue box appearing around lines drawn with the line tool (and other tools like the brush etc.). Whenever I try to use a tool, a blue box appears around the line and I have to double click on it to handle, which opens just this line in a screen finery semi where all other objects are semi-gris in the background. I can handle this line in this screen, but nothing else at this point I could do 5 minutes ago. For example, I can no longer reach the 2 lines drawn by the tool online together. For some reason, it started randomly (probably due to an accidental combination) and I just can't put it to what it was. I inserted a video showing if all goes well I mean. Any help would be appreciated.

  Object drawing mode. Simply disable it in the tools Panel, or by using the default keyboard shortcut, which is J.

• Where to start with e-Commerce

  I am trying to build my first ecommerce site, and I'm having a very difficult time to find where to start. I've been building sites in the Muse and the download of Go Daddy to the FTP host. I want to be able to add products and have a shopping cart, and I'll have the moment the more difficult to find where to start with this. I found a lot of resources in way later down the line. I need the beginners crash course on how to start from scratch. Something will help you! Thank you!

  Hello

  Can you please refer to these forum posts: -.

  Re: How to create a shop online by using Muse?

  Re: adding a shopping cart for muse

  Re: How to create a shop online by using Muse?

  Let me know if you need anything else

  Kind regards

  Rohit Nair

• Question about merging with the function of the background

  Hello, I was wondering if someone can tell me when it is useful to use the fusion with the function of the background.  I see nothing in the documentation on the subject. It seems to me that you can make your changes on the master slide, and you would not need the feature.  If I'm misunderstanding please let me know, thanks.

  Hello

  Is not safe to be comprehensive here, just my ideas. If you merge objects with the background on a master slide, you can save on the size of the file, because the background is an image, compared to several objects. You will not be able to edit these objects more. Also the slide background will always be behind any object. For slides model objects you can have them either on top, where they sit on top of the stack, or not. If you have objects of time during the rest of the project, they will always be on top of the slide background, but if you slide model objects, they'll be on top of the object of time during the rest of the project, unless you put that one always on top. You can disable to show slides on normal leaves model objects, separately from the power off from the slide background. Some of my ideas. For objects that I still want to be with the background, I'd prefer to merge. For objects that do not always, I will keep the separately and it is of course always the case for the button of interactive form that you cannot merge with the background (which is just an image, non-interactive).

  Lilybiri

• Flash line thickness with the line/pen tool

  Hi all

  I'm starting work on an animation project where I'm very straight lines of vector, not something designed by the brush/pencil tool or things like that which are normally used in Flash animations. What I was wondering is, is there a way to transition smoothly between the weight of the line between 2 points?

  For example, I can set A point to a line of 1 weight/weight, then point B a weight of 2 and have thick smooth the transition between two different weights? I can't find a way to change the process of creation, I can't find a way to change it later.

  Thank you.

  HA aman that you don't need that you will find as more complicated for something like that!

  I think your right on with what you do I think that the pen tool is probably your best bet, or if you like to make art in the other tools you can always import it into flash if the creative tools in Illustrator or other better tool works you flash is really good with the import of art as long as you don't need to animate the actual art that might be easier.

• After the FrameMaker is imported in RoboHelp, some items/styles appear in boxes with diagonal lines

  I have a chapter in FrameMaker which does not convert on RoboHelp correctly. The text and images in this section appear inside the rectangular boxes with diagonal lines. When I compile the Help menu, this section is oblique with the curiously resized images and large spaces where they do not belong. I guess that these boxes with the average of the diagonal lines something obvious and hope someone can share what this might indicate the error?

  I thought that maybe he had some problems in the structure of the FM model that is the source, but it seems in good condition. Curiously, all the other sections in the same chapter are created in a manner identical outputs without problem.

  Thanks in advance,

  Douglas

  Hello

  The diagonal lines are probably conditional build tags. Do you have the conditional tags in FrameMaker? If so, the conditional tag HR is also conditional on FM. For your problem else Jeff may have even more ideas. Also try searching the forum for problems of framemaker and image. There was a couple of posts on this topic in recent months.

  Take a bow

  Willam