Where is my hand tool?

Similar Questions

• Where is the hand tool?

  Hello

  I'm a Photoshop user, and at least I don't think I could not find the hand tool

  This is very useful, especially when you zoom in to touch up details in specific areas, move the document from one region to the other.

  Please tell me that I'm wrong and there is no on Photoshop Touch phone

  Thanks in advance

  In addition to useful response - gruele

  Please take a look at the pod to get started on the right side of this forum.

  http://forums.Adobe.com/thread/1152842

  

  The pod to begin will help you understand the new look of PS Touch and gestures.

  Please let me know if you have any other questions,

  Janelle

• Hand tool moves the entire screen instead of the view

  I use photoshop for a long time and I started to use after effects last month and 'I KNOW' how hand tool works, but recently I tried to mess with some settings of sequels and after that whenever I try to use the hand tool to change my point of view (for example after I Zoom) it moves all over the screen in the composition tab. To help you better understand what I'm saying, think of photoshop. When you are zoomed out in photoshop, hand tool does not work. because you're already all see. but now in sequels even when I zoomed out I can move the screen tab composition and it is not locked and it is very annoying. And I'm not talking about move tabs. I know how it works. My composition label is locked in place, but the screen/screens in this tab moves with hand tool.

  (Sorry if I made any mistakes. My English sucks)

  I KNOW"how the hand tool works, but recently I tried to mess with some settings of sequels and after that whenever I try to use the hand tool to change my point of view (for example after I Zoom) it moves all over the screen in the composition tab.

  AE hand tool and hand of the Ps tool are not exactly the same.

  PS the editing table (grey area outside the canvas) is irrelevant, because you would normally place of items outside the canvas - it is probably why you are locked in the content inside your canvas, when you are zoomed out.

  In Ae the editing table can be very relevant because the image is more than a window through which you see your trained together and animated elements. steal things from the outside, you can have cameras and outside lights and often end up making one Setup and use with the grey mount table more then the dimensions small composition. These layers backstage will be displayed as rectangular outlines. Suppose you've got some getting used to. Perhaps if you gave a specific example of a workflow where you are annoyed by this behavior and we can take a closer look.

  the image can move from time to time, but you can use the shortcuts to place it in the frame. Shift + / is my favorite.

  

• Is there a faster way to add text repeated in addition to the hand tool?

  Every day I receive several documents to edit and to each, there is a page where I enter the date 3 times. The file come with me so I can't do the thing in javascript, others spoke. I just go to tools, add text (date) and then use the hand for copy/paste tool. However, since for some reason hand tool that she pours just in the middle of the screen and I have to drag it to the area I need, I found it faster just to keep clicking and typing in the date I need.

  Whenever I do this, I keep thinking, "there must be a better way." Are there?

  With the help of Adobe Acrobat Pro

  There is no shortcut for this.

  A faster way may be to click and paste instead of paste and drag.

  1. right click on the page, then select "add text".

  2. click on the place where you want to enter.

  3. Paste (Ctrl/Cmd + V)

• Photoshop won't let me not deselect the hand tool

  I was sent a jpg of a web to change banner ad. It was sent to my PC where I have Photoshop CS2 and I tried to make changes, but found that I don't have the best copies of our logo on the PC, so I saved what I had done so far and I transferred to my Mac to work on. I'm on OS X 10. ; 7.3.

  When I open on my Mac in CC in Photoshop, the hand tool showed on-screen even if highlighted the move tool in the Toolbox.

  He wouldn't let me change the tools in the Toolbox. the hand rest icon no matter what I do. But he does not behave as you would expect the hand tool to behave, either; It is not move the workspace. It doesn't have any effect at all.

  However, I can still copy and paste by using the menus. But I can not move what I stuck with the arrow keys of the keyboard.

  I was able to save and close the document by using the menus.

  Someone has seen something like this before? Can I do about it?

  I thought it might work in Photoshop CS6 better, so I'll try that next.

  She works in CS6, so maybe it was my OS.

• Curves box disappears whenever I click on the hand tool to make points of an image.

  Hi, I use curves and when I apply a curve and select the hand tool and click on my image disappears from the box of curve - it applies the point on the curve area, but I have to re - select the layer with the curve to the box once again, making it work on the tedious curve.  In any case I know what I'm doing wrong?

  What is Photoshop CC? Under change (Photoshop on Mac) > preferences > Interface > Options, is "Auto-effondrement iconic panels" enabled? Uncheck the box that he and the Panel properties for curves if persists regardless of where you click.

• Default setting in Acrobat XI hand tool

  When I discover a PDF (Acrobat Pro XI) the selection tool is the default value.  I can't find any setting that will make the hand tool will be the default value.  Does anyone know where is this parameter, or another way to save your preferences?  I use Windows 7 Home Premium on a PC.

  (1) open Adobe

  (2) edit > Preferences

  (3) accessibility

  (4) uncheck the box 'always display the keyboard selection cursor '.

  5) click on 'OK '.

  (6) close Adobe

  (7) adobe re - open a PDF document

  (8) enjoy the new default setting of clamp.

• Link URL and the W on the hand tool?

  I think I have two things going on here.  1, it's how to disassociate a PDF file to a URL?  2. What is the W on the hand tool?  I would like to underline a text, but the needle with the w indicates the link where I found the pdf and I cannot make text changes, of that I am wanting.

  Second question first: the W on the hand tool means that your link opens in your browser (W = Web).

  First question: the link may have been created in the PDF file. But Acrobat/Reader by default creates links when he recognizes a URL. You can disable this option in preferences > General. Uncheck the «Create links from URLs»

• The hand tool parameters

  Photoshop CS5

  Windows 7

  Is it possible to change the normal functioning of the hand tool when you hold 'H '? Normally it zoom out to display the entire image, but I would be as it remains at the same magnification and just let move me the image, I find it annoying when it zoom I can lose a little of the place track where and what I've been to.

  The space bar not change cursor tool hand temporarily under Windows?

  Hold pressed H just done something else, see"temporarily zoom an image" in help.

• Pressed hand tool and its option

  Hello

  can you the hand tool when it is pressed, and when you get the gigantic red rectangle that zooms, being arrested in the middle of this process and let the position of magnification where I stopped?

  I tried with the command, ctrl, alt, shift, nothing...

  igotothegym wrote:

  Hello

  can you the hand tool when it is pressed, and when you get the gigantic red rectangle that zooms, being arrested in the middle of this process and let the position of magnification where I stopped?

  I tried with the command, ctrl, alt, shift, nothing...

  Depending on your reaction time, escape may work. If not, what Bob says to resize the zoom box, and then drag to move it around, the evacuation valve to freeze the view.

  Kind regards

  Peter

  _______________________

  Peter gold

  Know-how ProServices

      

• Hand tool changes to the article pointer

  I read that when someone creates a PDF with an article, this is what causes the hand tool change appearance and move/zoom on the page when you click anywhere. It is one of the more annoying "features" I've never met. I prefer to use the hand tool to pull the page exactly where I want it to be, rather than scrolling with the wheel, and whenever I click on my jumps and zooms page where I was at. I don't see how this would be useful in all settings, and even less implicitly. Is there a way I can replace it? I use Adobe Reader 9, not the full pro version.

  Would not be quite as obnoxious, but it zooms the page so wide that it requires horizontal scrolling to read all this. If someone knows a solution, please share!

  Disable the entry "hand tool read articles" in the Adobe Reader preferences.

• Hello everyone! I need an application where I can hand write or type and draw, all in the same...

  Hello everyone! I need an application where I can hand write or type and draw, all on the same page,.

  I'm taking courses in biology and chemistry and sometimes I need to draw and explain

  Can someone help me?

  Thank you!

  I need an application where I can hand write or type and draw, all on the same page, I'm taking courses in biology and chemistry and sometimes I need to draw and explain

  @manuelito.castro,.

  Discover the "Mobilenoter" application, that includes the possibility of ink in free form. If you need to be able to classify and organize your writings, Mobilnoter works perfectly with a single Note.

  -Doc

• Curriculum vitae of hand, tool and zoom

  I apologize for this easy research question, but neither documentation nor my own tests seem to indicate a clear answer.

  I have a graph of waveform and I use the zoom and hand on the graphic palette tool.

  1. after the application of the hand tool, how can I resume to the original curve?

  2. I have to zoom in a part of the graph several times consecutively, say twice. After the secodn zoom, I would take the result of the first zoom.
  The way the features of zoom-in and zoom-out work generally.

  In the graphic palette, the icon at bottom left of the zoom features, simply offer the opportunity to return to the initial version of the chart.

  I couldn't find a way to get a zoom-out extra as described above?

  Y at - it all?

  Thank you!

  MG.

  (1) use the Zoom all

  (2) you must programmatically.  When you zoom in, store the scale data X and Y (max and min).  You can make a button to return to the previous zoom then assigning data to scale with the values that you stored.

• Outlook Express 6, if I accidentally put a block on all mail entering .aol accts where can I find tools for restore it?

  If I accidentally put a block on all mail entering .aol accts where can I find tools for restore it?

  Hello

  
  I suggest to read the following steps and check if it helps.
  
  a. open Outlook Express
  b. Select tools, then select Message rules, click on the list of senders blocked in Outlook Express menu.
  c. highlight the sender or domain that you want to remove.
  d. click on delete.
  Reference: http://technet.microsoft.com/en-us/library/bb490836.aspx

• Space bar to hand tool is no longer works?

  I did no update AFAIK, but on opening Illustrator today the SPACEBAR to move the page (hand tool) no longer works, and frustrating, it must use the shortcut (H) instead.  Is this an update of Adobe?  Someone at - it's not how to get it back to normal?

  With the help of Abode CC

  Thank you!

  Adam,

  If the things that must operate simply refuse of (exhaustion all the possibilities (and carefully making sure you (all) make the necessary things)), you can try the list below.

  Sometimes, (some) things may fail or stop working for no apparent reason. When (other) possible reasons/remedies do not work, it is perhaps a kind corruption (temporary or permanent), or even preference settings which disturbs, which can be cured with something on the following list put in place in order to provide a catch-all solution for otherwise intractable cases. It starts with a few easy suggestions and safe) 1 and 2) for cases less serious and goes two ways 3) and 4) to reset the default preferences (easily but irreversibly and more laboriously but more completely and also reversible), then follows a list 5) various other possibilities, and it ends with a complete reinstallation 6). If no other suggestion doesn't work, or if no other suggestion appears, you can start on the list and decide how to go or who can apply.

  The following is a general list of things, try when

  (A) the question is not in a specific file,

  (B) you have a printer installed, connected and turned on if it's a physical printer (you can use Adobe PDF/Acrobat Distiller as a printer by default without the need to have a printer on, of course you will need to specify when you really need print on paper), and

  (C) It is not caused by problems with opening a file from external media (see below).

  You tried/made some of them already; 1 and 2) are easier for temporary strangenesses and 3) and 4) specifically may be corrupted/inconvenient preferences); ((5) is a list in itself and 6) is the last resort.

  If possible / there is, you must record a current work first, of course.

  (1) close Illy and open again.

  (2) restart the computer (you can make up at least 5 times);

  (3) close Illy and press Ctrl + Alt + Shift / Cmd + Option + shift during startup (easy, but irreversible);

  4) move the folder (follow the link with this name) with closed Illy (more tedious but also more thorough and reversible), for CS3 - CC you can find the file here:

  https://helpx.Adobe.com/Illustrator/KB/preference-file-location-Illustrator.html

  5 look through and try the relevant among the other options (click on the link with that name, item 7) is a list of the usual suspects among other applications which can disturb and confuse Illy, point 15) applies to the maybe CS5, CS6 and CC);

  More serious still (it can be serious because you may need to restore the plugins and whatnot if you've customized things), you can:

  6 (A) uninstall (check the box to delete the preferences, if any), B) run the cleanup tool (if you have CS3/CS4/CS5/CS6/CC) and C) reinstall. You can try without step B), but sometimes it is necessary, because otherwise things can persist.

  To uninstall:

  https://www.Adobe.com/cfusion/search/index.cfm?loc=en_US&term=uninstall&cat=support&produc t = illustrator & auto = 1

  Cleaning tool:

  http://www.Adobe.com/support/contact/cscleanertool.html