Where is the Apache of WLS 10.3.5.0 House?

Similar Questions

• Where is the Apache plugin files?

  I am trying to configure Apache to proxy connections to a cluster WebLogic 10.3. Unfortunately, I can't find the files in the module. (Using Web Server Plug-ins with WebLogic Server) documentation for the version that I use, they should be in WL_HOME/wlserver_10.3/server/plugin/linux/i686, and they must be named something mod_wl. The only files in this folder are libproxy_61.so and libproxy128_61.so, and there is no mod*.so appointed files anywhere in the installation tree. I'm sure that I chose when installing plugins, because I said just to be sure.
  
  It's just a test for purposes of training facility, but I would still operate.
  
  What gives? Is Apache supports default OTN downloads missing, if so, where can I get the files? Is it obsolete (as appropriate for what)? According to the docs, version 2.0 is obsolete but still supported, but version 2.2 is not obsolete. I checked on Windows and Linux, and is the same for both platforms.
  
  All advice appreciated!
  
  Edit: I repeated the installation again, chose Custom and installed the plugins of web service only. While plugins for IIS and another server (files libproxy_61.so, probably of Netscape) are present there is still no trace of the Apache files.

  Looking at the download site of Oracle for 10.3 there is a note indicating that Apache plugins are downloaded on [http://download.oracle.com/otn/bea/weblogic/server103/WLSWebServerPlugins1.0.1150354-Apache.zip] (reference [http://www.oracle.com/technology/software/products/ias/htdocs/wls_main.html]). I hope this helps.

  Confirmed: City of WL 10.3 installation docs ([http://e-docs.bea.com/wls/docs103/plugins/apache.html#wp131399]):

  "Install the plug-in to the shared server HTTP Apache as a dynamic object
  The Apache plugin is distributed as a shared object ( .so ) for Solaris, Linux, AIX, Windows and HPUX11 platforms. The WLS 10.3 installation includes not plugins of Apache HTTP server. Server HTTP Apache plug-ins are available in a zip file separate, available from the download of Oracle and support sites. »

  Published by: blumo on February 12, 2009 07:44

• Install and configure the Apache HTTP server plug-in

  Hello
  
  I use WL10.3 in a Linux machine.
  
  I have an environment where I have one WL server in a domain which is deployed with the web application
  
  And I have another area where I have two managed servers in a cluster that is deployed with the company.
  
  Now, I want to configure Apache HTTP server to make it work as a proxy with the weblogic.
  
  In my current scenario, the proxies of one seed server req in the cluster and that is defined in a jndi.properties.
  
  Now, what should I do if I want to use the Apache
  
  I have the following questions:
  
  1 forget my env, generally how to install and configure Apache HTTP plugin?
  I see that we have already seen libproxy_61.so file in /bea/wlserver_10.3/server/plugin/linux/i686
  
  Do I need to install the patch even then as said in http://www.oracle.com/technology/deploy/security/wls-security/2793.html?
  
  2. While am adding the lines in the httpd.conf file.
  LoadModule modules/mod_wl_22.so weblogic_module
  
  If I put ibproxy_61.so instead of mod_wl_22.so in this line?
  
  3. While configuring the proxy server, balancing and session replication will be assured?
  
  4. and for my setup, as stated at the beginning, a few lines, which may be the best architecture?
  
  Your help is really appreciated.

  Hi Subh
  1 so all external requests go to the single domain server with MoreWeb app. In this scenario, you don't need any additional Proxy Apache server. Because the basic concept of the Apache Web server is to route multiple applications on a cluster of managed servers. In your case, it is a single server, you don't need any additional Web front server. Now you have these EJB on another area that is clustered. I guess you use search standard JNDI to access the EJB. So, how do you make sure that only MoreWeb app requests are load balanced to the EJB. As each subsidiary request for EJB must go to MS1 and MS2 as robin in default mode. First request to MoreWeb need access EJB of MS1. Second request for MoreWeb need access EJB MS2 etc. This means in theory, you should have an Apache Web Server before the second area something like that. You have any servlet default weblogic cluster already deployed to the second area. Otherwise use that or care of apache in etc. Then in MoreWeb App when you search the EJB, make sure that you give the address Cluster and the direct port instead of the host/port MS1 or MS2. This Web server should in turn make the round robin for EJB on second domain clustered. When you get the InitialContext object instead of using empty default constructor as new InitalContext(), you may need to use something like InitalContext (aMap) new aMap corresponding to a hash table with the properties for the provider url, etc. etc. You can see the docs for more details. Here is the link for the EJB Clustering. See the section on EJB

  http://download.Oracle.com/docs/CD/E12840_01/WLS/docs103//cluster/load_balancing.html

  Hope this helps
  Ravi Jegga

• Where is the com.rim.ws.enterprise.admin package?

  Hello

  I'm about to use the BES API to make integration work. According to the online documentation (http://docs.blackberry.com/en/developers/deliverables/40686/jba1323369308846.jsp) all I need is the Apache CXF, however, if I look at the code example (https://github.com/blackberry/BWS-Samples/blob/master/SampleBwsClient.java) I also need the package com.rim.ws.enterprise.admin. I guess that's part of some SDK. Where can I get the miserable thing? TIA

  -aaron

  Yes, wsdl2java.bat will create the proxy together.

  You will need the BES in place before doing this. The steps only take a few minutes and there is no much test/development that can be done until the BES is available in any case.

• Facing a problem with writing the custom for WLS identity assertion provider

  I am facing a problem with writing the custom for WLS identity assertion provider.

  Requirement:

  Asserter identity configured in WLS should get called when the following cookie is sent in a request by my application
  cookie name: OAMAuthnCookie_blr1234567.idc.oracle.com:7777
  
  I added the name of the cookie as a token of support and Active token in WeblogicCustomIdentityAsserter.xml
  
  < MBeanAttribute
  Name = "SupportedTypes.
  Type = "java.lang.String [].
  Writeable = "false".
  Default = "new String() {& quot; OAMAuthnCookie_blr1234567.idc.oracle.com:7777 & quot ;}.
  / >
  <!-ActiveTypes attribute contains the subset of your mbean SupportedTypes who are active in the area. ->
  < MBeanAttribute
  Name = "ActiveTypes".
  Type = "java.lang.String [].
  Default = "new String() {& quot; OAMAuthnCookie_blr1234567.idc.oracle.com:7777 & quot ;}.
  / >

  Problem:

  Identity asserter provider is not invoked for the request that has the cookie named OAMAuthnCookie_blr1234567.idc.oracle.com:7777.
  
  I did some experiments with the cookie name, to see where the problem could be
  
  Identity asserter provider is triggered for the following cookies:
  OAMAuthnCookie_blr1234567.idc.oracle.com7777.
  blr1234567. IDC. Oracle
  blr12_XXX. IDC. Oracle.com
  
  and it does not work for cookie name - OAMAuthnCookie_blr1234567.idc.oracle.com:7777
  
  I think that the name of the token supports not the colon. I don't have control over the name of the cookie, two points will always be
  
  Tried it with giving the name of the cookie after the encoding of the colon
  

  < MBeanAttribute

  Name = "SupportedTypes.

  Type = "java.lang.String [].

  Writeable = "false".

  Default = "new String() {& quot; OAMAuthnCookie_blr2211441.idc.oracle.com & #58;. 7777 & quot ;} »

  / >

  
  But still does not work
  Am I missing something? Any help will be appreciated.
  Help, please!

  colon ': ' is an illegal character in the name of the cookie.

  RFC 2616, Section 2.2 says:

  token = 1 *.

  separators = "(" | ")" | " <" |="" "="">" | " @"

  | "," | ";" | ":" | " \" |<">

  | "/" | "[" | "]" | "?" | "="

  | "{" | "}" | SP | HT

  It is clear ":" a "separator" and thus not allowed in a token or a cookie name.

• Mavericks where is the best place for sites folder?

  Hi there... Thanks for reading

  I need to put in place of the Mavericks and dreamweaver sites

  where is the best place to have the sites folder?

  Thank you very much.

  warmly,.

  Hope

  Hope,

  This is a discussion on the establishment of a local web (Apache) on your Mac server.  Given that you do not use one, it is not applicable to your situation.

  Nancy O.

• How to make the Apache configuration for two different areas

  Hello
  
  I was trying just a few clustering on weblogic workshop. I was facing a problem... Here's the scenario:
  
  I have two clusters:
  
  CLUSTER1: 3 managed servers (server1, server2, serveur3)
  Cluster2: 2managed servers (server4, Server5)
  
  I have two examples of applications I have made on these two clusters i.e on cluster1 app1 and app2 on cluster2.
  
  These two applications are deployed all as I am able to open these browser applications by calling the individual run as server port: http://localhost:7003 / app1.
  
  Now, I have installed an apache server on my laptop and configured the http.conf file.
  
  
  Question: I am not able to call the application of apache. If there is only a single cluster then it works very well and for an application two that a single cluster (application) only works too which port is set in the last.
  
  Here are the contents of my httpd.conf file:
  
  #
  # This is the main Apache HTTP server configuration file. It contains the
  configuration directives # that give the server its instructions.
  # See < URL: http://httpd.apache.org/docs/2.2 > for more information.
  # See especially
  # < URL: http://httpd.apache.org/docs/2.2/mod/directives.html >
  # for an analysis of each configuration directive.
  #
  # Do NOT simply read the instructions here without understanding
  # what they do. They are there only as advice or reminders. If you do not know
  # consult the online documentation. You have been warned.
  #
  # Configuration and logfile names: If the file names that you specify for a lot
  number of files in server control begin by "/" (or "drive: / 'for Win32 '), the
  # server uses this explicit path. If the file names do not start
  # with "/", the value of ServerRoot directive is preceded by - so "logs/foo.log.
  # with ServerRoot set to "C:/Program Files/Apache Software Foundation/Apache2. 2' will be interpreted by the
  # Server as "C:/Program Files/Apache Software Foundation/Apache2.2/logs/foo.log".
  #
  # NOTE: Where file names are specified, you must use forward slashes
  # instead of backslashes (e.g. "c:/apache" instead of "c:\apache").
  # If a drive letter is omitted, the drive on which httpd.exe is located
  # will be used by default. It is recommended that you always provide
  # an explicit drive letter in absolute paths to avoid confusion.
  
  #
  # ServerRoot: The top of the directory under which the server tree
  # configuration, error and the log files are kept.
  #
  # Do not add a bar slash at the end of the directory path. If you point
  # ServerRoot to non-local disk, remember to point the LockFile directive
  # to a local disk. If you want to share the same multiple ServerRoot
  demons of # httpd, you will need to change at least the LockFile and PidFile.
  #
  ServerRoot "C:/Program Files/Apache Software Foundation/Apache2. 2. "
  
  #
  # Listen: Allows you to bind Apache to specific IP addresses and/or
  ports #, instead of the default value. See also the < VirtualHost >
  directive #.
  #
  # Change this to listen on specific IP addresses below for
  # prevent Apache glomming on all related IP addresses.
  #
  #Listen 12.34.56.78:80
  Listen 80
  
  #
  # Dynamic Shared Object (DSO) Support
  #
  # To be able to use the features of a module that was built as a DSO you
  # duty place corresponding 'LoadModule' lines at this location until the
  # the directives that it contained are actually available before their use.
  # Modules statically compiled (those listed by "httpd-l") is not necessary
  # to be responsible here.
  #
  # Example:
  # LoadModule foo_module modules/mod_foo.so
  #
  LoadModule modules/mod_actions.so actions_module
  LoadModule alias_module modules/mod_alias.so
  LoadModule modules/mod_asis.so asis_module
  LoadModule auth_basic_module modules/mod_auth_basic.so
  #LoadModule auth_digest_module modules/mod_auth_digest.so
  #LoadModule authn_alias_module modules/mod_authn_alias.so
  #LoadModule authn_anon_module modules/mod_authn_anon.so
  #LoadModule authn_dbd_module modules/mod_authn_dbd.so
  #LoadModule authn_dbm_module modules/mod_authn_dbm.so
  LoadModule modules/mod_authn_default.so authn_default_module
  LoadModule authn_file_module modules/mod_authn_file.so
  #LoadModule authnz_ldap_module modules/mod_authnz_ldap.so
  #LoadModule authz_dbm_module modules/mod_authz_dbm.so
  LoadModule modules/mod_authz_default.so authz_default_module
  LoadModule modules/mod_authz_groupfile.so authz_groupfile_module
  LoadModule modules/mod_authz_host.so authz_host_module
  #LoadModule authz_owner_module modules/mod_authz_owner.so
  LoadModule modules/mod_authz_user.so authz_user_module
  LoadModule autoindex_module modules/mod_autoindex.so
  #LoadModule cache_module modules/mod_cache.so
  #LoadModule cern_meta_module modules/mod_cern_meta.so
  LoadModule modules/mod_cgi.so cgi_module
  #LoadModule charset_lite_module modules/mod_charset_lite.so
  #LoadModule dav_module modules/mod_dav.so
  #LoadModule dav_fs_module modules/mod_dav_fs.so
  #LoadModule dav_lock_module modules/mod_dav_lock.so
  #LoadModule dbd_module modules/mod_dbd.so
  Modules/mod_deflate.so deflate_module #LoadModule
  LoadModule modules/mod_dir.so dir_module
  #LoadModule disk_cache_module modules/mod_disk_cache.so
  #LoadModule dumpio_module modules/mod_dumpio.so
  LoadModule env_module modules/mod_env.so
  #LoadModule modules/mod_expires.so expires_module
  #LoadModule ext_filter_module modules/mod_ext_filter.so
  #LoadModule file_cache_module modules/mod_file_cache.so
  #LoadModule filter_module modules/mod_filter.so
  #LoadModule modules/mod_headers.so headers_module
  #LoadModule ident_module modules/mod_ident.so
  #LoadModule imagemap_module modules/mod_imagemap.so
  LoadModule modules/mod_include.so include_module
  #LoadModule info_module modules/mod_info.so
  LoadModule modules/mod_isapi.so isapi_module
  #LoadModule ldap_module modules/mod_ldap.so
  #LoadModule logio_module modules/mod_logio.so
  LoadModule log_config_module modules/mod_log_config.so
  #LoadModule log_forensic_module modules/mod_log_forensic.so
  #LoadModule mem_cache_module modules/mod_mem_cache.so
  LoadModule mime_module modules/mod_mime.so
  #LoadModule mime_magic_module modules/mod_mime_magic.so
  LoadModule negotiation_module modules/mod_negotiation.so
  #LoadModule modules/mod_proxy.so proxy_module
  #LoadModule proxy_ajp_module modules/mod_proxy_ajp.so
  Proxy_balancer_module modules/mod_proxy_balancer.so #LoadModule
  Modules/mod_proxy_connect.so proxy_connect_module #LoadModule
  Proxy_ftp_module modules/mod_proxy_ftp.so #LoadModule
  Modules/mod_proxy_http.so proxy_http_module #LoadModule
  #LoadModule proxy_scgi_module modules/mod_proxy_scgi.so
  #LoadModule reqtimeout_module modules/mod_reqtimeout.so
  #LoadModule rewrite_module modules/mod_rewrite.so
  LoadModule setenvif_module modules/mod_setenvif.so
  Modules/mod_speling.so speling_module #LoadModule
  Modules/mod_ssl.so ssl_module #LoadModule
  #LoadModule modules/mod_status.so status_module
  #LoadModule substitute_module modules/mod_substitute.so
  #LoadModule unique_id_module modules/mod_unique_id.so
  #LoadModule userdir_module modules/mod_userdir.so
  #LoadModule usertrack_module modules/mod_usertrack.so
  #LoadModule version_module modules/mod_version.so
  #LoadModule vhost_alias_module modules/mod_vhost_alias.so
  LoadModule modules/mod_wl.so weblogic_module
  
  
  
  * < IfModule mod_weblogic.c > *.
  WebLogicCluster 127.0.0.1:7005, 127.0.0.1:7007, 127.0.0.1:7003, 127.0.0.1:7103, 127.0.0.1:7104
  MatchExpression /app1
  * < / IfModule > *.
  * < location /weblogic > *.
  SetHandler weblogic-Manager
  WebLogicCluster 127.0.0.1:7003, 127.0.0.1:7005, 127.0.0.1:7007, 127.0.0.1:7103, 127.0.0.1:7104
  DebugConfigInfo WE
  PathTrim /weblogic
  * < / location >. *
  
  * < IfModule mod_weblogic.c > *.
  WebLogicCluster 127.0.0.1:7003, 127.0.0.1:7005, 127.0.0.1:7007
  MatchExpression /app2
  * < / IfModule > *.
  * < location /weblogic > *.
  SetHandler weblogic-Manager
  WebLogicCluster 127.0.0.1:7003, 127.0.0.1:7005, 127.0.0.1:7007
  DebugConfigInfo WE
  PathTrim /weblogic
  * < / location >. *
  
  
  < IfModule! mpm_netware_module >
  < IfModule! mpm_winnt_module >
  #
  # If you want httpd to run as a different user or group, you must run
  # httpd as root initially and it will pass.
  #
  # Group / user: the name (or #number) of the user/group to run httpd as.
  # It is generally advisable to create a dedicated and aggregatable for user
  # httpd, as with most system services are running.
  #
  Demon of the user
  Daemon group
  
  < / IfModule >
  < / IfModule >
  
  Server configuration # 'hand '.
  #
  # The directives in this section implement the values used by the 'hand '.
  # Server, which meets all demands that are not managed by a
  definition of # < VirtualHost >. These values also provide defaults for
  # all < VirtualHost > containers you can set later in the file.
  #
  # All these directives may appear inside containers < VirtualHost >,.
  # in which case the value default parameters will be substituted for the
  virtual host of # being defined.
  #
  
  #
  # ServerAdmin: Your address, where problems with the server should be
  # e-mail. This address appears on some generated by the page server, such
  # as error documents. for example [email protected]
  #
  ServerAdmin < adminurl >
  #
  # ServerName gives the name and the port used by the server to identify itself.
  # This can often be determined automatically, but we recommend that you specify
  # explicitly to avoid problems during startup.
  #
  # If your host doesn't have a registered DNS name, enter its IP address here.
  #
  #ServerName < servername >
  # DocumentRoot: The directory you are going to use your
  documents #. By default, all requests are taken from this directory, but
  aliases and symlinks # can be used to point to other locations.
  #
  DocumentRoot "C:/Program Files/Apache Software Foundation/Apache2.2/htdocs".
  
  #
  # Each directory that Apache has access can be configured in respect
  # to which services and features are allowed and/or disabled in this
  # Directory (and its subdirectories).
  #
  # Everything first, we configure the 'default' to be a very restrictive of game
  features #.
  #
  < directory / >
  Options FollowSymLinks
  AllowOverride None
  Order deny, allow
  Refuse to all the
  < / Book >
  
  #
  # Note that, from this point forward you must precisely enable
  features special # to be enabled - so if something doesn't work not as
  # you might expect, make sure that you have specifically enabled it
  # below.
  #
  
  #
  # This should be replaced by what you set DocumentRoot.
  #
  < directory "C:/Program Files/Apache Software Foundation/Apache2.2/htdocs" >
  #
  # Possible values for the Options directive are "None", "All."
  # or any combination of:
  # Indexes includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
  #
  # Note that "MultiViews" must be named explicitly -'all Options '.
  # is not give it to you.
  #
  # The Options directive is complex and important. Please see
  # http://httpd.apache.org/docs/2.2/mod/core.html#options
  # For more information.
  #
  Options Indexes FollowSymLinks
  
  #
  # AllowOverride controls what directives may be placed in .htaccess files.
  # It can be 'All', 'None', or any combination of key words:
  # Options FileInfo AuthConfig Limit
  #
  AllowOverride None
  
  #
  # Controls who can get stuff from this server.
  #
  Order allow, deny
  Allow all the
  
  < / Book >
  
  #
  # DirectoryIndex: sets the file Apache will serve if a directory
  # is requested.
  #
  < IfModule dir_module >
  DirectoryIndex index.html
  < / IfModule >
  
  #
  # The following lines prevent the .htaccess and .htpasswd files to be
  # seen by customers of the Web.
  #
  < FilesMatch "^ \.ht" > "".
  Order allow, deny
  Refuse to all the
  Meet all
  < / FilesMatch >
  
  #
  # ErrorLog: The location of the error log file.
  # If you do not specify an ErrorLog directive in a < VirtualHost >
  # container, error messages related to this virtual host will be
  # logged here. If you do define a for a < VirtualHost > error log
  container of #, that host errors will be logged there and not here.
  #
  ErrorLog logs / 'error.log '.
  
  #
  # LogLevel: Control the number of messages in the error_log.
  # Possible values include: debug, info, notice, warn, error, crit,.
  # emerg, alert.
  #
  LogLevel warn
  
  < IfModule log_config_module >
  #
  # The following directives define some nicknames format for use with
  # a directive CustomLog (see below).
  #
  "LogFormat '%%u %t \"%r\ hour' % > s \"%{Referer}i\ %b" \"%{User-Agent}i\" "handset"
  "LogFormat '%%u %t \"%r\ hour' % > s %b "commune
  
  < IfModule logio_module >
  # You must enable mod_logio.c use %I and frequency
  "" LogFormat '%%u %t \"%r\ hour' % > s %b \"%{Referer}i\ "\"%{User-Agent}i\ "%I %o "combinedio
  < / IfModule >
  
  #
  # The location and format of the access (Common Log Format) log file.
  # If you do not have any logfiles access set in a < VirtualHost >
  container of #, they will be saved here. On the other hand, if you the do
  # define per - < VirtualHost > access logfiles, transactions will be
  # logged there and not in this file.
  #
  Common CustomLog "logs/access.log.
  
  #
  # If you prefer a log file of access, agent, and referer information
  # (Combined logfile format) you can use the following directive.
  #
  #CustomLog "logs/access.log' combined
  < / IfModule >
  
  < IfModule alias_module >
  #
  # Redirect: Allows to tell clients the documents used for
  # exist in your server's namespace, but no more. The customer
  # make a new request for the document at its new location.
  # Example:
  # Redirect permanent/foo http:// < url >/bar
  
  #
  # Alias: Maps web paths into paths of file system and is used to
  # access content that don't live under the DocumentRoot directive.
  # Example:
  # Alias /webpath/full/filesystem/path
  #
  # If you include a trailing / on /webpath, then the server will be
  # require that he be present in the URL. It is also likely that
  # duty provide a < Directory > section to allow access to
  # the path to the file system.
  
  #
  # ScriptAlias: This controls which directories contain server scripts.
  # ScriptAliases are essentially the same as assumed names, except that
  # documents in the target directory are treated as applications and
  # executed by the server on demand, rather than as documents sent to the
  client of #. The same regulation on flight "/" applies to the ScriptAlias
  # as for the Alias directives.
  #
  ScriptAlias/cgi-bin / "C:/Program Files/Apache Software Foundation/Apache2.2/cgi-bin/".
  
  < / IfModule >
  
  < IfModule cgid_module >
  #
  # ScriptSock: On threaded servers, refers to the access path to the UNIX
  decision # used to communicate with the CGI mod_cgid daemon.
  #
  Newspapers/cgisock #Scriptsock
  < / IfModule >
  
  #
  # "C:/Program Files / Apache Software Foundation/Apache2.2/cgi-bin" should be replaced by everything that your ScriptAlias
  # CGI directory exists, if you have set up.
  #
  < directory "C:/Program Files/Apache Software Foundation/Apache2.2/cgi-bin" >
  AllowOverride None
  None of the options
  Order allow, deny
  Allow all the
  < / Book >
  
  #
  # DefaultType: Server default MIME type used for a document
  # If it cannot establish also as file name extensions.
  # If your server contains mainly text or HTML documents, it is "text/plain".
  # a good value. If your content is binary, such as applications
  # or images, you can use "application/octet-stream" instead of
  # Keep browsers try to view binary files, as if they were
  # text.
  #
  DefaultType text/plain
  
  < IfModule mime_module >
  #
  # TypesConfig points to the file containing the list of mappings from
  # MIME file extension - type.
  #
  TypesConfig conf/mime.types
  
  #
  # AddType allows you to add or replace the MIME configuration
  # the file specified in TypesConfig for specific file types.
  #
  #AddType application/x-gzip .tgz
  #
  # AddEncoding allows you to have certain browsers uncompress
  # information on the fly. Note: Not all browsers support this.
  #
  #AddEncoding x-compress. Z
  #AddEncoding x-gzip .gz .tgz
  #
  # If the AddEncoding directives above are commented out, then you
  # should probably define these extensions to indicate media types:
  #
  AddType application/x-compress. Z
  AddType application/x-gzip .gz .tgz
  
  #
  # AddHandler allows you to map certain "manipulators": file extensions
  # No actions associated with the file type. It can be either integrated into the server
  # or added to the directive of the Action (see below)
  #
  # To use CGI outside of ScriptAlias directories scripts:
  # (You will also need to add "ExecCGI" to the "Options" directive.)
  #
  #AddHandler cgi-script .cgi
  
  # For maps of type (negotiated resources):
  #AddHandler type-plan of the var
  
  #
  # Filters allow you to process content before sending it to the client.
  #
  # To parse .shtml for server-side includes (SSI) files:
  # (You will also need to add "Includes" the "Options" directive.)
  #
  #AddType text/html .shtml
  #AddOutputFilter INCLUDES .shtml
  < / IfModule >
  
  #
  # The mod_mime_magic module allows the server to use various boards of the
  content of the file itself to determine its type. The MIMEMagicFile
  # directive tells the module where the definitions of suspicion.
  #
  #MIMEMagicFile conf/magic
  
  #
  # Customizable error responses come in three flavors:
  ((# 1) text 2) local redirects 3) external redirects
  #
  # Examples:
  #Error Document 500 "The server made a boo boo".
  #Error Document 404 Missing.html
  #Error Document 404 "/cgi-bin/missing_handler.pl"
  #Error Document 402 subscription_info.html < url >
  #
  
  #
  # EnableMMAP and EnableSendfile: on systems that support.
  projection in memory # or the sendfile syscall is used to deliver
  # files. Usually, this improves the performance of the server, but must
  # turn off when mounted network is served
  # file systems or if support for these functions is also
  # broken on your system.
  #
  #EnableMMAP off
  #EnableSendfile off
  
  # Additional configuration
  #
  # The configuration files in the conf/extra/directory can be
  # included to add additional features or change the default configuration
  # the server, or you can simply copy their content here and change as
  # necessary.
  
  # Server-pool management (MPM specific)
  #Include conf/extra/httpd-mpm.conf
  
  # Multilingual error messages
  #Include conf/extra/httpd-multilang-errordoc.conf
  
  # Entries to the fancy directory
  #Include conf/extra/httpd-autoindex.conf
  
  # Language settings
  #Include conf/extra/httpd-languages.conf
  
  # User directories
  #Include conf/extra/httpd-userdir.conf
  
  # Info in real time on the applications and configuration
  #Include conf/extra/httpd-info.conf
  
  # Virtual hosts
  #Include conf/extra/httpd-vhosts.conf
  
  # Local access to the manual for the Apache HTTP Server
  #Include conf/extra/httpd-manual.conf
  
  # Distributed authoring and versioning (WebDAV)
  #Include conf/extra/httpd-dav.conf
  
  # Various default settings
  #Include conf/extra/httpd-default.conf
  
  # Secure connections (SSL/TLS)
  #Include conf/extra/httpd-ssl.conf
  #
  # Note: The following text should be present to support
  # start without SSL on platforms without equivalent/dev/random
  but # a statically compiled in mod_ssl.
  #
  < IfModule ssl_module >
  SSLRandomSeed startup builtin
  SSLRandomSeed connect builtin
  < / IfModule >
  
  This is so for the app2 only configuration above, I am able to call and app1 his adage "404 page not found".
  
  Can soomebody help me cofiguring apache so that I can call the two applications.
  
  
  Thank you
  Ankit

  >
  
  WebLogicCluster 127.0.0.1:7005, 127.0.0.1:7007, 127.0.0.1:7003, 127.0.0.1:7103, 127.0.0.1:7104
  MatchExpression /app1
  
  
  SetHandler weblogic-Manager
  WebLogicCluster 127.0.0.1:7003, 127.0.0.1:7005, 127.0.0.1:7007, 127.0.0.1:7103, 127.0.0.1:7104
  DebugConfigInfo WE
  PathTrim /weblogic
  

  
  WebLogicCluster 127.0.0.1:7003, 127.0.0.1:7005, 127.0.0.1:7007
  MatchExpression /app2
  
  
  SetHandler weblogic-Manager
  WebLogicCluster 127.0.0.1:7003, 127.0.0.1:7005, 127.0.0.1:7007
  DebugConfigInfo WE
  PathTrim /weblogic
  
  >

  This configuration is a little weird. He has /app1 MatchExpression and MatchExpression /app2 and at the same time two sections . Are you sure you understand what means that the configuration?

  Try something like this...

  
  SetHandler weblogic-Manager
  WebLogicCluster 127.0.0.1:7003, 127.0.0.1:7005, 127.0.0.1:7007, 127.0.0.1:7103, 127.0.0.1:7104
  DebugConfigInfo WE
  

  
  SetHandler weblogic-Manager
  WebLogicCluster 127.0.0.1:7003, 127.0.0.1:7005, 127.0.0.1:7007
  DebugConfigInfo WE
  

  where /app1 and /app2 are your weblogic applications contexts.

  http://download.Oracle.com/docs/CD/E11035_01/WLS100/plugins/Apache.html
  http://httpd.Apache.org/docs/2.0/mod/core.html#location

• Where are the options of the trackpad in Sierra OS?  In El Capitan the trackpad there NO light tap (ENTER) and just one click HARD (ENTER) and could move the cursor.

  Where are the options of the trackpad in Sierra OS? In El Capitan the trackpad there NO light tap (ENTER) and just one click HARD (ENTER) and could move the cursor.

  System Preferences > Trackpad!

• where is the key of "hash" on my keyboard

  where is the sign of hash on my keyboard tag... Please quite

  We need a lot more information to give you special help.

  Quoted by of Apple  'how to write a good question.

  To help other members in answering your question, give as much detail as possible.

  • Include your name (peripheral) product and specifications such as the speed of the processor, memory and storage capacity. Please do not include your serial number, IMEI, MEID or any other personal information.
  • Provide the version of your operating system and the relevant applications numbers, e.g. "OS X 10.4.11" or "Safari 4.1.3.
  • Describe the problem and include all the Details on what seems to make it.
  • The list of troubleshooting steps you have already tried, or temporary corrections that you discovered.

  For a detailed 'coaching', please see usage tips , help us help you on these forums and wrote an effective communities of Apple Support question

• where is the icon of the iphone on

  information from the iPhone on the iTunes site or Apple and where is the little phone that you clicked get info and move photos from your phone to a PC?

  The following website contains information of the iPhone: http://www.apple.com/iphone/

  If this isn't the type of information you want, reply with more details.

  iTunes can be used to move pictures from a computer to the iPhone but not the other way. I suspect you're talking about the iPhone icon is shown in the screenshot below (since locate and view your device in iTunes - Apple Support )

  

• Where is the messages the button 'send '?

  I see a button a blue circle with an arrow pointing up. I'm guessing that this button brings me to the top of the conversation. It is where the word 'send' used to be. So, where is the button 'send '?

  This arrow is the new Send button. In addition, if you hold down this key before sending a message (or 3D touch if you have a 6 or higher), you can change the appearance of your message, or you can add things to the screen with this message. I hope this has been helpful!

• Where is the State of the batteries, pencil in the new IOS

  OK we have a new iOS, but where is the pen battery status now? I'm not the the lock screen widget.

  I still have the battery widget display which ask me to lock screen.  Have you checked under "Edit" in the view of widgets to make sure it is still enabled?

• Does anyone know where is the "marker to start project?

  Does anyone know where is the "marker to start project? Not here, and where it is shown in photos in "help". Use often to start my sessions a few bars before 1 Bar. The "End of project marker" triangle is at the end of my session and 'Help', said that both exist. Thank you!

  The beginning of project marker is shown below...

  You may need to scroll the window arranges a little to the right of having show itself.

  Very important "DO NOT SET YOUR PROJECT START MARKER EARLIER THAN 1,1,1,1"

  Doing so brings various undesirable problems caused by a negative project start marker.

  Just start your project at the bar 3 or where to leave room for everything what you want to do earlier. Don't forget you can still "enter time" at any time after creating a project to make more room and move the whole project to the right if necessary.

  

• where are the photo books manufactured?

  Where are the Apple on a manufactured Mac photo books created?

  Apple does not announce - you need to ask them - I guess that's where ever they choose and could be one of a number of different places according to volume and when ordering

  And you posted in iPhoto for Mac forum - Photo Books can no longer be ordered at all since iPhoto - they withdrew in April

  LH

• Where are the fonts for FCPX located?

  Hello

  Where are the fonts for FCPX in my MacBook Pro to mid-2015?

  There are 3 files for fonts: System/Library/Fonts, Library/Fonts, ~ Library/Fonts.

  It seems to be Library/Fonts, but I see that some are not used in FCPX, so I want to be sure. If I'm right, why some is used in FCPX? Looking for don't not to add them, just curious.

  The best

  Elmer

  All fonts are system fonts, no specific applications.

  Fonts can be of different Types of fonts.

  FCPX uses only specific fonts Types, not all types, the system recognizes.