Where is the catalog file?

Similar Questions

• where are the audio files stored during recording as a project?

  Where are the audio files stored during recording as a project. The project opens fine on my computer, but when I move to another computer I have missing audio files.

  They are stored in their own folder in the project folder:

  

  So if you want to move it to another computer, you must copy the project folder, not only of the project folder.

• Question of location/duplicate the catalog files

  I need assistance with my location of the catalog.  I restored from backup after resetting my computer.  Now, I have original photos on a D drive and I have a copy (maybe not a complete copy) on the C drive.

  I already had my catalog and my original photos on D (I think).

  Now when I add new photos, where should I put them?  I would like to put it on D, but all other pictures in the catalogue are on C.

  I would like to have everything on D and do not have a copy of everything.

  I don't want to lose one of the photos on D that are not in the catalog for a reason any.

  JoeBusher wrote:

  I opened the catalog of pse14 to move D:\Pictures 04 04 2015\Joe (1 mod 23/11/15 285 MB).  The properties for the pictures are all over D.

  I also opened pse14 catalog at C:\Photoshop\Joe 1 (375MB mod 25/12/15).  Those are all on C.

  Thank you for your help.  I feel that we are making progress.  What should I do next?

  First, use the catalog to D: now to import new files. Make sure you set your preferences to import files from the card or the scans to the D: drive.

  Then you can compare what is on C: and D: catalog to make sure that they are the same. You can use the Explorer / Finder to remove duplicates for free space on C:.

  I guess that you always backup folder that you have used before: keep to make sure you have extra security before you do the cleaning on C:.

  You can delete unwanted catalogs since the Organizer catalog manager.

• What are the default locations of PSE 8 for photos and the catalog files in Windows 7?

  I can only find this information in the Knowledge Base for XP and Vista.

  Thanks for help

  The default locations for catalog on Wndows 7 records is the same as on Vista:

  http://kb2.Adobe.com/CPS/515/cpsid_51536.html

  To find out where the current catalog file, do help > System Info.

  The default locations for photos are under my pictures on Windows 7, compared to photos on Vista.

• Bookmarks in version prior to the 8 - installed the new hard drive - where is the bookmarks file?

  installed new hard drive two months ago - just now to reinstall Firefox - installed new version 8 - need to know where my old favorites would be stored (what file and where)

  The profile is a file that store your personal information in a safe place

  • https://support.Mozilla.com/en-us/KB/profiles
  • here explain how to make a backup of https://support.mozilla.com/en-US/kb/Backing%20up%20your%20information profile
  • here explain how to restore

  https://support.Mozilla.com/en-us/KB/recovering%20important%20data%20from%20an%20old%20Profile

• Where is the bookmarks file? I need to sync via mobileme.

  For the MAC version of Firefox 4.0.1 where is the precise location (path) on the computer where the bookmarks file is stored? What will be the name of the favorite file?
  I intend to put the bookmarks on my iDisk (mobileme) file so that my wife and I can have the same bookmarks and sync will keep synchronized.

  They are stored in a file called places.sqlite in the profile folder. This file also stores the history of navigation. For the location of the profile folder see https://support.mozilla.com/kb/Profiles

  Another method to keep synchronized bookmarks is to use Firefox Sync, which is integrated in Firefox 4. For more information about Firefox Sync, see http://support.mozilla.com/kb/what-firefox-sync?

• Where are the saved files that someone sends you through Skype Windows8

  Hello

  I just bought a new computer that has windows 8 installed above and I must say that I was shocked when I realized that the system is like that running a pad that is so bad, if you want to actually work with the computer.

  Then, I installed Skype and was amazed that there is nothing that you can do with it. No video call?

  I use Skype to send files and make video calls. Now, when someone sends me a file I have no choice where this file is saved... Where are the files stored?

  OS: Windows 8

  Thank you

  type in your windows search bar
  
  '%AppData% '.
  then you will go to the folder "Skype".
  and there will be a folder with "my received files."
  had the same problem and figured it out

• Vista backup care contains only the catalog files

  I got Windows Vista the value to automatically save to a network drive.  I haven't used the computer for a couple of years, so he sat and the laptop battery has been cut.  I discovered more of my photo on my new computer files are missing and I tried to restore from my backup of this old computer which contained all the photos I had ever taken, but now some if these images went on the old computer also.  I use the original computer to restore the files as the new computer does not see the network drive.

  On the network drive, my shirts are:

  Backup utility Windows One Care

  Date My_PC 27/12/2011

  Do_Not_Delete.Mediaid date 12/12/2009

  2009 date 27/12/2011

  Catalogs date 27/12/2011

  DO_NOT_DELETE. GLOBALCATALOG DATE 19/01/2009

  DO_NOT_DELETE_SES(7D3C3BE-A742-486A-BO22-3F3FF61E1F99) DATE 09/02/2009

  WITH 10 OTHER FILES LIKE THIS

  Part1.zip.catalog date 19/01/2009

  With 200 other files numbered accordingly Part2... Part201

  Files

  DO_NOT_DELETE_SES (VARIOUS ISSUES) DATE 19/01/2009

  DO_NOT_DELETE.backupSetID date 19/01/2009

  When I use restore advanced and he say to go to the network drive, it is said that there is not a backup on this drive.

  This network is a network drive of computer at home, we just used for backups and file saving, we want not lost as tax documents.  However I always assumed that my photos were safe because I backingup a week.

  I hope someone can help, as most of the missing images of my mom who is now deceased.

  Is there anyway to restore from one of the above files without the help of the program to restore backup because he does not see the backup.

  You use the Restore tool to recover files saved?

  See the link

  http://answers.Microsoft.com/en-us/protect/Forum/protect_start/how-do-i-retrieve-my-Windows-Live-OneCare-Backup/e99fec82-8b1b-4f6f-B23C-601c8e9a6ff9

• Where is the page files?

  I am running Vista Home premium. I want to reduce the size of my partition of my boot c: drive. I want to find my page files and move them to another drive and then reduce the size of the partition.

  Where are they?

  How can I see them?

  How can I move them?

  Hello

  The page file (Pagefile.sys) is a hidden file on your hard drive that Windows Vista uses as if it were a memory (RAM). The file exchange and physical memory is the virtual memory. By default, Windows stores the paging file on the boot partition (the partition that contains the operating system and its support files). The default paging file size is equal to 1.5 times the total RAM. However, this default configuration is perhaps not optimal in all cases. This article describes how to configure the paging file for optimization of the system and recovery.

  You can follow the steps in the link given by bob.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/Windows-7-set-to-no-page-file-and-i-cannot-change/992de6a8-bec2-4E74-b6d9-d418a7f5cda0?TM=1367819685901

  Alternatively, you can follow the steps to move the paging files.

  1. Log the computer as an administrator.
  2. Click Startand then click Control Panel.
  3. Click performance and Maintenanceand then click System.
  4. Click on the Advanced tab, and then, under performance, click settings.
  5. Click the Advanced tab, and then under virtual memory, click change.
  6. In the drive [Volume label] list, click one drive other than the one on which Windows is installed (Windows is usually installed on the drive C). Under Total paging of the size of file for all drives, note the value that is displayed next to recommended.
  7. Click custom size, and type the value recommended in the initial size (MB) box.
  8. Type the maximum size that you want to allow for paging in the size maximum (MB) , and then click set.
  9. In the drive [Volume label] box, click the drive on which Windows is installed (usually drive C), and then use one of the following steps:
     • If you don't want a swap to disk file, click No paging file, and then click set. A message similar to the following message is displayed:

  If the pagefile on volume C: has an initial size of less than 126 megabytes, then the system may not be able to create a debugging information file if a STOP error occurs.
  Continue anyway?

  Click Yes.

  1. • If you want to keep the minimum size of the file on the drive, click custom size, and type a value that is equal or greater than the amount of RAM in the computer in the initial size (MB) box. Type the same value in the box size maximum (MB) , and then click set.
  2. The following message appears:

  The changes you did ask you to restart your computer before they can take effect.

  Click OK, click OK, click OK, and then click Yes when you are prompted to restart the computer.

  Hope it helps you to solve the problem.

• find out where are the archived files

  can they be deleted?

  There is no "archived" file in Vista - I think you can mean something else.  If it's something else, please describe what you mean and I might be able to determine what type of files, you're talking about this. Where these files are created?  Which could be used for?  What do you expect to find?  Why do you need to find the 'files '?

  Microsoft Outllook archived files (usually called archive.pst) to store contacts and old emails so that they don't clutter up the file outlook.pst normally used.  Where they are depends on where you put them.  The easiest way to find them is to do a thorough search of the entire disk.  To search for the folder C: whole disk in Vista go to start / search and type in EXT:PST. As you type, you'll see two hyperlinks appear just above where you type and we'll search everywhere.  A click on it.  Who will do a fast indexed search and bring up a dialog box.  It does not find them in this research because the file type. PST is not normally indexed.  Click on advanced search.  Click the drop-down location and find the C: drive and click on it. Check the box "include not indexed, hidden and system files (might be slow).»  Then click on search.  You will now search your entire hard drive to the specified file.  And Yes, this isn't a very effective way to search the entire disk for a file but it is how it is done in Vista.

  I hope this helps.  If I'm on the wrong track, please explain to me exactly what you want to say (and give me an example of an "archived" file or that is contained in an 'archived' file, if you can).

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Where is the Hosts file in Windows 7 x 64 Ultimate

  I have tried to change the Hosts file in Windows 7 x 64 Ultimate but can't find it.  I don't know if this is for x 86 and can easily change this one, but for the life of me can't find it for x 64.  Can someone give me sense?  Thanks in advance.

  If all is not lost, where is he?

  I'm running Win7 64 bit Ultimate and my hosts file can be found here.

  c:\Windows\system32\drivers\etc

  Bruce Hagen
  MS - MVP October 1, 2004 ~ September 30, 2010
  Imperial Beach, CA

• Lightroom does not copy the catalog files after downloading window 10

  Has anyone out there had trouble with the files cannot be copied to the catalog? My catalog is on another internal drive and says "could not copy to backup.

  Get to the top by projection manual path.  seems fine now thanks to you all.

• How can you save the original with the catalog file file after edit

  OK I'll try boarding.

  First of all, I shoot a game... According to 600 photos. Import the game in lightroom, I mark the photos I want and delete the catalog. I edit and rename and export the files I want the game. say 300 photos.

  My question is; After saving the 300 photos in the catalogue how match the original photos with those exported if they match.

  I think that the best answer is to change your workflow.

  I never export photos except for a specific purpose (e-mail, web, print), and then after that I used the photos exported, I remove the exports. I do not export them just to have sitting around on my hard drive for some whose use is more later. In this way, the photo is still available in Lightroom, and if you want this photo retouched, you go into Lightroom and find and export as required. It is not question to match to originals with exported given that you do not keep the exported photos once they have served their purpose (e-mail, web, print).

• jpg in ACR - where is the xmp file?

  Where can I find the xmp file after treatment jpg into Adobe camera raw?

  Thank you

  It is not a. It is stored in the header of the file.

• What is the catalog file and how can I find?

  @

  Hi sylviac

  A catalog is a database of the location of your photos and the information about them. When you change the pictures, rates, add keywords or other things to photos in Lightroom, all these changes are stored in the catalog. The photo files themselves are not affected. To create a new catalog: -.

  • Open Lightroom
  • New catalog, select file (Menu bar)

  Please go through these links using Adobe Photoshop Lightroom | How Lightroom catalogs work   and How to create and manage catalogs in Photoshop Lightroom

  Concerning

  Assani