Where is the default location of a sqlite file in the air

Similar Questions

• How can I fix error "changed default location for Windows Update files" that Fit-It notes several times, but does not solve?

  Using Windows XP Home Edition SP3, IE8, and Firefox 13.

  Used several times to install and MS Fit-It tool to try to fix Windows Update so that will download the updates of high priority.  4 four security updates not always settle.  Fix - It tool shows that "one or more Windows Update are configured incorrectly" and that it has been fixed (run 10 times).  He also pointed out "where Windows Update stores data has changed and needs to be repaired", but offers no solutions to fix this problem.  Cannot find any reference to this in the KB or MS answers.

  Is it possible to repair this problem and it will make a difference by allowing for installing security updates?  I talked to Ms. telephone and e-mail do not install security updates, but they say I have to pay $99 to get this issue fixed MS Update.  I thought I read that security patches are supposed to be supported without charge.

  Any new advice or techniques for solving this would be appreciated.

  Hello RickH999,

  Follow the steps in the article to reset the Windows update components and check if the problem persists.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  I hope this helps.

• Where are offline files stored (to be synchronized)? Can we change the default location?

  Dear
  I use Vista Ultimate.
  Where are offline files stored (to be synchronized)? Can we change the default location?
  concerning
  Maurin

  Hi Maxim P,.

  Sync Center is the place to go to synchronize your computer with network folders, mobile devices and compatible programs. Sync Center can keep automatically your files and folders synchronized in different places.

  Open Sync Center by clicking the Start button, tap all programs, accessories, and then clicking on of Sync Center.

  Sync Center is a feature of Windows that allows you to keep information synchronized between your computer and files stored in folders on network servers. They are called offline files because you can access them even when your computer or the server is not connected to the network.

  You can see the link below for more information about changing the location of the CSC files.

  How to change the location of the CSC folder by configuring the CacheLocation registry value in Windows Vista

  http://support.Microsoft.com/kb/937475

  For more information, see work with network files when you are offline.

  See the links below for more information on synchronization.

  Sync Center: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/Sync-Center-frequently-asked-questions

  How to maintain your information is synchronized

  http://Windows.Microsoft.com/en-us/Windows-Vista/how-to-keep-your-information-in-sync

  Sync Center: recommended links

  http://Windows.Microsoft.com/en-us/Windows-Vista/Sync-Center-recommended-links

  Please post back and let us know if it helped to solve your problem.

  Kind regards

  KarthiK TP

• where is datamodeler.log if the default location is not accessible?

  Hello world
  where can I find the datamodeler log file if the default location is not accessible, either because of lack of privileges or because the application is streamed?
  Thanks much for the advice.
  yours,
  user8632123.

  Hello
  Try to set your location of the log file from the tools-> preferences-> environment-> Log

• where is the button located size lithium battery. I want to upgrade my camera to factory default

  because I can't delete or remove photos from my camera that I am trying to reset to factory default.  I can't find the battery lithium button size to do so.  Help

  where is the battery located on my sony cybershot camera 16.2 megapixels that it will not load

• the default location of the window popup

  I use a planning site that opens a new window every time I have change or make a reservation. The pop up has always opened in the center of my screen. Last night, it now opens at the bottom of my screen, so I have to drag up to see anything. How can I change the default location where I want? Close the browser has not changed anything about it, restarted my computer has not changed.

  Thanks for the reply, but it turns out that my problem was caused by a much simpler problem.
  The size of the window when not maximized not had been changed and moved to the bottom of the screen. Once I deselected maximize and then corrected the smallest window size and position, the pop-ups are returned to the opening where they shouldn't.

• where is the location on my office found for bookmarks

  Don't know if anyone will answer this question correctly? And when it comes to time, I do not have much of it. I work my butt off the coast to be sitting here wasting time on the simple search for information. The real question, I so, where is the folder of bookmarks on my desktop PC? I have Windows 7 Pro and I use Mozilla Firefox 34.0.5 I fed up with Internet Explorer, however I don't like the way Internet Explorer stores Favorites on my desktop PC. I gave a direct description to what I want to know and I expect a direct response, some little stretched run answer me here and there. Like all communities support, everybody thinks that everybody asks that question has time to spend days, weeks, months looking for a simple answer to a simple question. Like night and day is it such a folder for Firefox, as it is for Internet Explorer, registered on a PC. Thank you for your time and information.

  Firefox has nothing to do with the favorite folders. As I said, Firefox stores bookmarks in the places.sqlite file in the profile folder.

  Apparently, you have two profiles.
  C:\Users\? \AppData\Roaming\Mozilla\Firefox\Profiles\d8rkjo4v.default
  C:\Users\? \AppData\Roaming\Mozilla\Firefox\Profiles\m8kaaqri.default

  Check the dates on the files in the profile folders to see who is the most recent or the one used most recently.

  'Files' in Firefox bookmarks are a graphical representation for for user interface display. Bookmarks are not stored in separate folders, as with Windows / Internet Explorer.

• How to MOVE the default location of Windows Fax and Scan?

  We have recently added a second server (Windows Server 2008) to a domain AD., because the new server has more resources, we moved all the DOCUMENTS folder to users from the server (Server 2003) network share to address liked to a share on the new Server 2008 machine. After the move, all Windows 7 machines runs the utility of fax and scan can not find MANY DOCUMENTS folder as the utility constantly points to the old server (which took the OLD action of document already deleted).

  I changed the location of DOCUMENTS in Windows 7 for Server 2008 sharing, but Fax and Scan keeps searching for the old stock 2003 server and I cannot find where to redirect them. Can I turn off Windows fax and analysis services to the title of printing and scanning and then restore? That will allow me to redirect to the correct folder? I have tried even to search the registry for references to the old stock but still can't seem to locate the old server to the MANY DOCUMENTS reference.

  Can anyone help?

  Russ Foszcz

  I solved this problem with a synlink

  First to find the actual location of Library/Documents/scanned documents, make this scanned Documents to right click and click 'open file location '.

  In my case he opened it (that I copied from the address bar):

  Documents C:\Users\Tim\Documents\Scanned

  What should I do now is to save the files in this folder, and then delete the "Documents" folder completely

  Then click the windows key and type in run or search (or click the Windows key + R) and type 'cmd' and press enter

  A black console should appear

  In it, you must enter this command, I wanted that my scans to record in X:\Scans

  MKLINK /j "C:\Users\Tim\Documents\Scanned Documents" X:\Scans

  then press enter

  This creates a folder (symlink, not a shortcut), who acts as a normal file, but is actually located in a different place, so when the scan software saves files in its default location will be actually stored in X:\Scans

• Change the default location of the snapshot for a virtual machine

  Hello. I found this tutorial

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US & cmd = displayKC & externalId = 1002929

  on hos to move the default location for the snapshots of a virtual computer. How ever what I don't understand is where can I covering the line in the file *.mvx, "workingDir = "new_path_location" ? I just start typing at the end of the file? The file can be edited in Notepad of windows or I should connect to the host using putty and correct it in nano, for example?

  For example, in the same document, they used

  workingDir = "/vmfs/volumes/46f1225f-552b0069-e03b-00145e808070/vm-snapshots"

  I think that " 46f1225f-552b0069-e03b-00145e808070 " is an identifier for the volume. True or not? If yes how can I list all the volumes that are mapped to the host or vCenter Server identifiers?

  Thank you!

  alexiaesx wrote:

  Hello. I found this tutorial

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalID=1002929

  on hos to move the default location for the snapshots of a virtual computer. How ever what I don't understand is where can I covering, in the file *.mvx, line "workingDir = "new_path_location" ? I just start typing at the end of the file? The file can be edited in Notepad of windows or I should connect to the host using putty and correct it in nano, for example? in any case around, either Notepad or vi or nano - both will be fine.

  For example, in the same document, they used

  workingDir = "/vmfs/volumes/46f1225f-552b0069-e03b-00145e808070/vm-snapshots"

  I think that " 46f1225f-552b0069-e03b-00145e808070 " is an identifier for the volume. True or not? Yes its unique identifier for your vmfs volumes, but its better if you provide your name of store data instead, as if your data store name is XYZ, provide/vmfs/volumes/xyz/vm-snapshot, you can do it using UUID as well but you need to type for long and its not easy to remember.

  If yes how can I list all the volumes that are mapped to the host or vCenter Server identifiers?

  using the cli

  list of esxcli storage vmfs

  using ssh console, this should provide you with all the information for the disks

  Fdisk-lu

  Another thing,

  CD vmfs/volumes /.

  LS - lah

  You can see your vmfs volumes

• How to create an extension not in the default location in Eclipse?

  Hello world

  I recently installed an Extension builder 3 on my Eclipse Kepler (on a Mac OS 10.6.8)

  I just created an extension for InDesign CC (9.2) in my eclipse workspace. It works fine, I can launch InDesign CC and see my extension. I just created the extension proposed by the wizard without changing anything.

  This extension works now. The next step for me also moves into a tree view of the project, say that < workspace >/autocat/MyExtension. To do this, I use the context menu on my extension project and then move... I moved the project where I want to and launched InDesign. It crashed (see details below).

  The solution I tried then was not creating a project in the default location proposed by Eclipse, but I got this error message:

  

  In a last hope, I tried to use the eclipse import project, but didn't get any success.

  An excerpt from the crashlog when I moved my project away from the default location (looks like I have a problem with PlugPlugOwl):

  Excerpt from Crashlog

  Thread 0 crashed: dispatch queue: com.apple.main - wire 0 com.adobe.PlugPlugOwl 0x0000000102bcae9d std::basic_ostream < char, std::char_traits < char > > & boost::uuids:operator < < < char, std::char_traits < char > > (< char, std::char_traits < char > > std::basic_ostream &, boost::uuids:uuid const &) + 14121 1 libSystem.B.dylib 0x00007fff85985019 _dispatch_barrier_sync_f_slow_invoke + 63 2 libSystem.B.dylib 0x00007fff859638d2 _dispatch_queue_drain + 251 3 libSystem.B.dylib 0x00007fff8596417f _dispatch_queue_serial_drain_till_empty + 9 4 libSystem.B.dylib 0x00007fff85996f1c _dispatch_main_queue_callback_4CF + 37 5 com.apple.CoreFoundation 0x00007fff81424098 __CFRunLoopRun + 3640 6 com.apple.CoreFoundation 0x00007fff81422d8f CFRunLoopRunSpecific + 575 7 com.apple.HIToolbox 0x00007fff81d447ee RunCurrentEventLoopInMode + 333 8 com.apple.HIToolbox 0x00007fff81d44551 ReceiveNextEventCommon + 148 com.apple.HIToolbox 9 0x00007fff81d444ac BlockUntilNextEventMatchingListInMode + 59 10 com.apple.AppKit 0x00007fff84cc9eb2 _DPSNextEvent + 708 11 com.apple.AppKit 0x00007fff84cc9801-[NSApplication nextEventMatchingMask:untilDate:inMode: dequeue:] + 155 12 com.apple.AppKit 0x00007fff84c8f68f-[NSApplication run] + 395 13 com.adobe.exo.framework 0x00000001028d1e58 exo::app::OS_AppBase::RunEventLoop() + 56 14... adobe. InDesign.AppFramework CPMUnknown < ISAXContentHandler > 0x000000011d66f8d3: CPMUnknown(IPMUnknown*) + 775731

  15... adobe. InDesign.AppFramework CPMUnknown < ISAXContentHandler > 0x000000011d66e9b2: CPMUnknown(IPMUnknown*) + 771858

  16 main 0x0000000100001dbc com.adobe.InDesign + 412

  17 com.adobe.InDesign 0x0000000100001bb4 start + 52

  Any idea?

  Well, I 'solved' in this way: I moved in my system from my project files, then removed from the Eclipse (without removing it from the disk). Then I re-imported the project in Eclipse and trashed my InDesign preferences. It still crashes from time to time, but I can work with it. The truth is out there...

• Default location of the file project - PE7

  Can anyone help please

  .

  I searched for a way to edit my default project file location. Managed to change all the locations of disc scratch on my F: (Local) drive, but I don't see a way to change the default location for projects which will be the same player.

  I know that I can put it whenever I start a project, but it seems strange with modern software are unable to define a default value.

  I searched the registry and cannot find anything here, and I see nothing in Edit > Preferences. Also searched the forum, but could not find an answer.

  Thank you

  Colin

  The ultimate workflow, IMHO, is to locate projects in a single folder structure. As you found, the general path is sticky, so it will save you some work, as you only change the folder.

  When I start a project, I first look at this project and its needs. Let's say I have a project for Berry (one of my clients), and it is for a DVD of a family member. Already, I have a folder 'Berry' on my external HDD FW 800, W:\ and would then add a subfolder "Elizabeth_04" in this case. Below, I would create, "Capture" (if I did any Capture), 'Stills,' 'Music', 'Audio', 'Titles', etc. and then complete the sub-sub sub-sub-folders of the copies of any material rolling and then use them, as the project progresses to keep my belongings organized.

  Back in the NLE, to the new project, I name presents a "Elizabeth_04" and find it in W:\Berry\Elizabeth_04, pointing my disks scratch on 'Even as a project.' As I create or locate assets, they would remain in the appropriate sub-sub sub-sub-folders.

  In my case, I export my deadlines as elementary streams, i.e. of files DV - AVI Type II video only and PCM/WAV (or AC3) Audio files only to a case of sub-sub, 'Finished AVI' or ' Finished AC3. I the author in Adobe Encore, so I import from these two cases, goods that are needed, and my project still is located in the W:\Berry\Elizabeth_04 folder, where still creates necessary sub-sub-sub folders. It's all in the place of a single root. Once completed, I have just go to W:\Berry\Elizabeth_04 and delete this folder and all folders under it.

  Good luck

  Hunt

• What are the default locations of PSE 8 for photos and the catalog files in Windows 7?

  I can only find this information in the Knowledge Base for XP and Vista.

  Thanks for help

  The default locations for catalog on Wndows 7 records is the same as on Vista:

  http://kb2.Adobe.com/CPS/515/cpsid_51536.html

  To find out where the current catalog file, do help > System Info.

  The default locations for photos are under my pictures on Windows 7, compared to photos on Vista.

• ITunes media folder location has changed, but it keeps resetting to the default location

  Hello

  I changed my iTunes media folder location. My internal drive has two drives (was originally a Fusion player, after a system crash, I had to clean it and install Mac OS from scratch and is no longer read as a reader of fusion, but I agree with it), so one of the discs that I use for the OS itself and the other to store the data. I've changed most of my files application for the storage disk storage. When I change the location of folder of media to iTunes, after reboot, it restores the original file to ~/Music/iTunes/iTunes Media.

  Why does that happen?

  If this info can help, I do not have the bluetooth icon in the menu bar, so I removed it by opening bluetooth preferences and unchecked 'see the bluetooth in the menu bar. He disappears. When I restart, it seems once again, it is not happened to Yosemite.

  Thanks in advance.

  iTunes will revert to the default locations, if the configured drive is not present when iTunes opens. This happens if the drive is not mounted or asleep...

• Where did the user profile folder located on Firefox Mobile?

  I develop a plugin for "Firefox for Android" and I need to create a folder with files to my plugin. I'm doing it: https://developer.mozilla.org/en-US/docs/Code_snippets/File_I_O

  BUT I can't check ir directory has already been created. Where can I see the "ProfD" on Android? I have read a different answers on the Net saying this is in:
  /Data/data/org.Mozilla.Firefox/files/Mozilla/?. by default.

  But when I opened my Android file manager, there is no data/data directory. There is only one of the data / and not mozilla in there.

  Help!

  I solved the problem. As says "madperson", my browser does not allow me to see the files. I therefore decided to use ADB to browse files. I had a few problems, but I could do with it:

  • . / adb devices
  • . / adb shell
  • Su
  • LS data/data/org.mozilla.firefox/files/mozilla/7j15q9po.default

  To open a file:
  Cat MyFile.txt

• using google maps on FF, by default the Hebrew language. This does not happen in IE or chrome. where is the setting to control this on FF?

  using google maps on FF, by default the Hebrew language. This does not happen in IE or chrome. where is the setting to control this on FF?

  try to clear the cache and cookies from Google.com , and reload the page.