Where is the VI Analyzer Config to get examples of LabVIEW?

Similar Questions

• How to read the VI Analyzer config file?

  Hello

  How to read the analuzer vi configuration file? I'm getting a lot of errors on the size of the front panel and I don't know what should be the size you want. Where is the maximum expected size of the specified front panel?

  Kaspar says:

  Hello

  How to read the analuzer vi configuration file? I'm getting a lot of errors on the size of the front panel and I don't know what should be the size you want. Where is the maximum expected size of the specified front panel?

  If you have VI Analyzer installed, you can load the configuration file and look at the section select the Tests. There is a test for the maximum size of front under front-> User Interface. The default value is the resolution of the current monitor of the PC (including multiple monitors). You can change to the desired option.

• Where are the guidelines on how to interface custom for LabVIEW data acquisition equipment?

  I have a need to do some very specialized data acquisition that may require special hardware for the building. I would still use LabVIEW as the front end and maybe even wear parts of the interface of the final product. However, I can't find the documentation. Where is that is kept? I've seen references to a number of generic protocols, no links back to the details, which may be appropriate. The data are a band high bandwidth, but bursty with sampling frequency up to 40 MHz and events that lasts about 100 milliseconds. Can anyone recommend various methods would be most suitable for this application?

  You can use the instrument driver model and guidelines.

  http://www.NI.com/white-paper/3271/en/

  Use google to search not for OR

  I searched

  national instruments instrument driver guidelines

• Installing TB31.3.0 on a W8.1 workstation; I want to delete the messages on the user agent of TB, but prevent deletion on the server. Where is the switch? When to install

  Hello!

  I have already installed a TB user agent on my workstation 'primary': I can create, read, and DELETE messages ON the workstation and the server.
  I want now to install a user of TB on a "secondary" workstation agent, where I can create, read and DELETE messages on the workstation. But I don't want the secondary workstation to delete messages on the server. (In short: I want that the function "delete" ONLY allowed to my primary workstation).
  Is this possible? Where is the switch ON / OFF? (For example, this feature is available on the agent on my WindowsPhone).
  When I install it?

  Thanks for your support!
  Rgds
  Flamboyant

  Using Thunderbird on your second workstation - the only option would be to create a Pop email account
  so before you download anything, you must configure the account settings to "leave a copy on the server.

  Tools > account settings > account for Pop mail server settings.
  or
  Menu icon > Options > account settings > server settings

  • Letter: look for the e-news at startup
  • Letter: arrival of new messages every xx minutes
  • Select: automatically download new messages
  • Letter: Leave messages on the server '
  • Click OK

  E-mail POP accounts can only download the mail from the Inbox server.
  This will allow you to remove off the coast of the secondary workstation and leave it on the server.
  However, Pop cannot see or download other folders on the server: IMAP only can see other folders these are read remotely. But in IMAP because records are a same as server, removing in TB will remove also off server.

• How to get the video intro off my google home screen I already saw it, where is the firefox logo used to be.

  How to get the video intro off my google home screen I already saw it, where is the firefox logo used to be. I started with the last update that I rebooted.

  Hello
  to change the homepage when opening firefox-press 'Alt' and click on tools-> Options.

  Main menu, you can change the URL.

  If the problem persists, you can follow these simple steps:

  Enter about: config in the address bar and press ENTER. Accept the message of 'dragons' to see the Advanced preferences screen. Use the above search box to enter the below pref.
  

  You can assign an empty string to stop your Firefox to retrieve "extracts" and brandLogo changes the browser.aboutHomeSnippets.updateUrl pref. Right-click this pref and select Edit then clear the value as pref in the box that appears, and then click OK. Who will also disable "snippets" that appear under the container of the research on the default home page.

  Then you must open the folder of your profile, via help > Troubleshooting Information > profile folder > > button view folder. Then close Firefox. Your profile file open with Firefox closed (Firefox '3-bar' menu key > exit/Quit), wait or two minutes, then remove the storage\moz-safe-about + home folder in the Firefox profile folder to remove the brandLogo and stored in IndexedDB code snippets to make Firefox use the default brandLogo and a defined default code snippet.

  If you later change your mind about these changes, you can reset the pref browser.aboutHomeSnippets.updateUrl via the context menu and Reset allows to retrieve the default value using the storage\moz-chest-fort-about + home folder again.

• Satellite P100: Where to find the BIOS 2.4 to get rid of overheating

  Hi all

  Well well, it is for anyone who has had problems of overheating on the p100 or other such fan disturbances in vista or xp.

  Here is my story:
  I bought a new p100 on seven 6th with Vista preinstalled and I found that I couldn't play because A) there was the problem of "stutter" B) my system overheats protection to stop the automatic to do.

  So I spent a week of research forums and the bowls of the internet trying to find solutions for that.
  The first most liley solution I found was to downgrade to XP, so I did... and that fixed the problems of stuttering during playback of dvd and while palying games!

  However I have had overheating issues (I could only play games like oblivion for 10 minutes then boom).
  The temperature of my system has been peeking at as 75 to 85 degrees, obviously this is not good. So I phoned a support technique toshiba and they told me to take it in an ASP and the look.

  Well, it's a problem for me, because the nearest EPA is 4 hours away by rocket lol jk but it is plan Z.
  So I looked more deeply into the darkest recesses of internet forums...

  AND I THINK I FOUND THE ANSWER!

  However, this requires downgradeing to the BIOS version2.40 who, after a week of research, I have been unable to find! :(

  So my question... my please. Can someone tell me where I can find this particular version of the Bios?

  If you have had similar problems, like that I can post a link to the forum (I've not worn to hand at the moment but I can get it if anyone wants) which I think has the answers but you should have a pretty good understanding of computer systems to try these fixes. I weeded ut who changes the ACPI settings does not work (for my system anyway)

  Any help in locating BIOS v2.4 will be greatly appreciated

  I wish you much luck, but I'm a little pessimistic about finding the old version of the BIOS. Please check this forum a bit better by using the advanced search option. I'm not 100% sure but I think I read the similar topic some time ago. Maybe you can find the user who wrote this version of BIOS. Check her profile here and write on his e-mail address, if any.

• wanted to know on how to use labview to get the values of the Spectrum Analyzer?

  Hi all

  I am a new Member and I am doing a project I have to see the performance of the DSl cable (lasting different for example 100 m, 200 m) on the Analyzer of spectrum and its values as graphic, food, BW should be get in excel sheet. I the company Rohde and Schwarz Spectrum Analyzer, I use interface GPIB 82357 B Agilent... If anyone can help me how to start. I plugged GPIB to spectrum and its drivers on the computer...

  Thanks in advance

  Patricia

  @Dennis Knutson

  I did not choose, he gave to me... and I have to work use only... no other choice...

• Kodak Hero 9.1 and installed, to the point where the pilots are downloading, I get the error "operation not complΘtΘ 0x00003eb.

  I come from Kodak Hero 9.1 bought and installed, to the point where the pilots are downloading, I get the error "operation not complΘtΘ 0x00003eb" Kodak say it of to do with Windows, but how to get assistance, an idea (which seems to have started since my last automatic download for service pack 1, maybe irrelevant)

  Hello

   

  Thanks for asking!

  When you try to install the driver for Kodak Hero 9.1 you receive 0x00003eb. error code

   

  To help you better, we need more information.

   

  When you click on the dialog box, you receive information about the error?

  To work with the issue, I suggest you follow these steps:

  Method 1: Clean boot

   

  When the computer starts to boot, programs non-Microsoft will not be started and would avoid any interruption of their share.

  See the mentioned site:

  How to perform a clean boot for a problem in Windows Vista, Windows 7 or Windows 8

  http://support.Microsoft.com/kb/929135

  Note: once you are done with the boot, follow step 3 of section to set your computer to normal startup.

  Note: If in case, you are connected via a connection wireless, and then when you start the System Configuration utility to perform the clean boot, click Startup and Services tab one time and check wireless see corresponding section are checked (enabled).

  Method 2: File system (CFS) Scan Checker

  SFC scan will find all missing or incorrect system files and repairs them.

   

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  I hope this helps. If the problem persists, or if you have problems of Windows in the future, let us know and we would be happy to help you.

   

• I get a notice that my subscription will expire soon.  I click on "Subscription manager" and go to my account, but I can't find ANYTHING on how to pay renew my subscription.  Where is the membership Manager?

  I get a notice that my subscription will expire soon.  I click on "Subscription manager" and go to my account, but I can't find ANYTHING on how to pay renew my subscription.  Where is the membership Manager?

  Hi Ruth,.

  Please see manage your creative cloud membership

  Hope that helps!

  Kind regards

  Sheena

• I have a standard Acrobat 9 volume license, I need to reinstall it on a pc where we need to reformat the pc, how can I get the installer?

  Hello

  I have a standard Acrobat 9 volume license, I need to reinstall it on a pc where we need to reformat the pc, how do I get the installer to download?

  previous versions http://www.adobe.com/downloads/other-downloads.html

• Where can I get help with this message? «Adobe Acrobat Reader DC could not open (my file.xls) because it is not a type of supported file or because the file has been damaged (for example, it was sent as an attachment to e-mail and has not been correctly d

  Where Iget can help with this message? «Adobe Acrobat Reader DC could not open (my file.xls) because it is not a type of supported file or because the file has been damaged (for example, it was sent as an attachment to e-mail and has not been correctly decoded).» I don't know where to go or how to solve this problem. It started to happen after I went to the office 356 and uses Windows 10.

  Hi brionp43071032,

  Please see the troubleshooting provided in this KB doc steps: fix damaged document error when opening PDF files

  Let us know if you still experience the problem.

  Kind regards

  Meenakshi

• Captivate slidelet 9 - where is the stick slidelet box? I don't see an action button in the properties to get the box stick slidelet.

  Captivate slidelet 9 - where is the stick slidelet box? I don't see an action button on the slide bearing or the slidelet properties pane.

  Jenny.James.Tampa

  Tab actions are for the rollover slidelet area, and there is the option you are looking for:

  

• Where is the error log to pdf print stored on the server?

  Where will be stored in the server log files?
  What all journal contains this as all the details?
  What newspaper will contain details about the errors of pdf?

  Where will be the log files stored in server?
  What all log contains what all details? 
  

  BI Presentation Server log can be found in HOME\OracleBIData\web\log\sawlog0.log

  This log is useful for Presentation Server login questions and answers/questions about dashboard.

  You can increase the recording on this server to get a detailed logging to solve the problems of SINGLE sign-on and integration by editing the logconfig.xml file in the HOME\OracleBIData\web\config folder

  Server logs BI is NQServer.log and this NQQuery.log in the HOME\OracleBI\server\Log folder

  NQServer.log is to start the Server BI issues and responsible subjects and connected data sources
  the RPD. If the NQSConfig.ini contains errors or if the RPD has version problems or if appropriate RPD is not loaded, the BI server does not start and this is part of the NQServer.log

  NQQuery.log consists of Server BI query operations. We can also check if the result is to come from the cache or directly from database. We can get the real time to execute the query. We can get the query physical and logical journal.

  BI journal Cluster controller can be located from the HOME\OracleBI\server\Log folder. When the cluster is configured with OBIEE server nodes, the NQCluster.log file would provide the connectivity of cluster nodes and the State information. As well as the NQServer.log, NQCluster.log would be very useful for cluster of related issues.

  BI Javahost can be found in HOME\OracleBIData\web\log\javahost\jhost0.log. It is used to identify issues with tables and graphs generated by Java answers/dashboard reports.

  BI Scheduler can be located in HOME\OracleBI\server\Log\NQScheduler.log. It is used to identify the problems associated with the supply/Planner. To increase logging on Scheduler, set debug to true indicator in the scheduler jobs Manager configuration window.

   Which log will contain details about pdf errors? 
  

  can be jhost0.log... not sure

• where is the icon of the iphone on

  information from the iPhone on the iTunes site or Apple and where is the little phone that you clicked get info and move photos from your phone to a PC?

  The following website contains information of the iPhone: http://www.apple.com/iphone/

  If this isn't the type of information you want, reply with more details.

  iTunes can be used to move pictures from a computer to the iPhone but not the other way. I suspect you're talking about the iPhone icon is shown in the screenshot below (since locate and view your device in iTunes - Apple Support )

  

• cannot display the thumbnails tab or to get rid of the page "you have opened a new tab".

  I get this(see pic) when I open a new tab, I solved this problem before, but I forgot how I did the last time.
  I tried clicking on the "don't show me this page again.
  What is a crunch the words more near getter.
  tried the zoom out without result
  then I tried to go into everything: config and permutation of the browser.newtab.url in about: newtab just to see that it was still defined as about: newtab.
  How can I get rid of that? Unable to see thumbnails is kind of annoying.

  I never have this page soon. Looks like a malicious extension for me.

  Try Firefox Safe mode to see if the problem goes away. Firefox Safe mode is a troubleshooting mode that temporarily disables hardware acceleration, restores some settings and disables add-ons (extensions and themes).

  If Firefox is open, you can restart Firefox Safe mode in the Help menu:

  • Click the menu button

    

    click Help

    

    then select restart with disabled modules.

  If Firefox does not work, you can start Firefox in Mode safe as follows:

  • On Windows: Hold down the SHIFT key when you open the desktop Firefox or shortcut in the start menu.
  • On Mac: Hold the option key during the startup of Firefox.
  • On Linux: Exit Firefox, go to your Terminal and run firefox-safe-mode
    (you may need to specify the installation path of Firefox for example/usr/lib/firefox)

  When the Firefox Safe Mode window appears, select "start mode safe."

  

  If the problem is not present in Firefox Safe Mode, your problem is probably caused by an extension, theme or hardware acceleration. Please follow the steps described in the section Troubleshooting extensions, themes and problems of hardware acceleration to resolve common Firefox problems to find the cause.

  To exit safe mode of Firefox, simply close Firefox and wait a few seconds before you open Firefox for normal use again.

  When find you what is causing your problems, please let us know. This might help others with the same problem.