Where rules for calculation of the Manager will be deployed

Similar Questions

• When you use Adobe Flash on youtube for example. The player will receive more and more delays when you use the tools of player until firefox freezes for about 10 seconds.

  After the delay freezing of the player will be reset to 0. I can reproduce this 'crash' by moving just my mouse on the youtube progress bar and see the delay to accrue. This only happens when firefox is my main window.

  Hello, there are reports by users that comodo products may not work well with the safe_mode for firefox that adobe has introduced in its version of the plugin flash since version 11.3.

  http://forums.Adobe.com/thread/1074253

  http://forums.Comodo.com/empty-t85399.0.html

  Please make sure that firefox.exe, plugin - container.exe and FlashPlayerPlugin_*.exe are not blocked or sandbox sort by your security or software in the case where it doesn't work or try to change your provider AV (I would recommend microsoft security essential, it is quite reliable and light) or downgrade to flash version 10.3.

• Looking for example of the Manager to OBTAIN with the PL/SQL source type

  Hello

  I currently have a Manager GET job with a running QUERY source type in ADR 3.0.  The call returns the number of records (hundreds, or even thousands of 10) in JSON and allows the user to navigate through the results.

  The call accepts several parameters that I convey just in the place where the clause of the query in the Manager.  Data is retrieved by the beach date (s).

  To prevent queries runaway with ranges for a long time, I've implemented a logic in the sql statement to limit the applicant.  The applicant requested an error thrown instead.  There are other limits that I'm imposing on other entries I need to provide useful errors for example.

  I would like to change the call GET use PL/SQL type instead of the type of REQUEST so that I can do validation on entries and send useful return error messages if necessary, however I can't find examples online.

  Are there any examples (or alternatives) would be greatly appreciated.

  Thank you

  Anthony

  Hello

  You can use the Pipelined functions to generate your recordset plsql and then just use a select statement of the function in the pipeline in the service definition.

• Calculation of the Manager: how to validate several sets of rules / rules at once

  Hi all

  I have a lot of rules and rule sets and want to validate both, but am not able to do the same thing. You can deploy multiple rules / rulesets at once, but not able to find even for validation. No idea how this can be achieved. If this isn't the case, then is there any reason why this is not provided.

  Thank you.

  The only way to do that is to put all the rules and rule sets marked for the deployment, and validation at the level of the application node.

  Sree - mougel

• Hallo, my Firefox browser does not load youtube for some reason, the Explorer will be. I try to change the setings proxy as the firefox Help Center has suggested, but nothing helped. Also, no updates have been installed on firefox, I know. Pleas help me.

  Hallo,

  For some reason any firefox stopped to load the site youtube for me. I can watch videos other people uploaded on facebook for example, but can not enter the site. Explorer is in charge of the site, so I tried to change the proxy settings in my firefox such as recommended in the Help Center, but nothing helped. Also, there was no update not installed I know, go to youtube by any link will just give me an error message saying: the connection was reset while the page is loading.
  Pleas help me.

  Thank you, I looked again articles of the Center for help and resolved the problem by disabling cookies and hidden history.
  If this issue is no longer relevant. But thank you.

• Calculation of the Manager - missing tool > menu Variables in 11.1.2.4

  Hello

  I can't manage (all applications) in Hyperion Planning 11.1.2.4 substitution variables. The menu, I should be able to achieve in the calculation Manager under

  Tools > Variables

  is absent. How can I access and manage overall in Hyperion Planning 11.1.2.4 substitution variables as I could do in older versions?

  What Miss me in this regard?

  Thank you

  bidi

  I think that's the way it works now, they can only be created at app/db level.

  See you soon

  John

• logic to write business rules for filling in the data since a dataform to anoth

  Hi all
  
  
  What is the logic that I use for data stand from one form to another form
  
  For example:
  
  Plan 1 data of level 0 dataform as complete as plan 2 dataform the parent value.
  
  am not understand what logic I use please help me write this business rule.
  
  Thanks in advance
  
  FYI, SM.
  
  Published by: user13385347 on August 25, 2011 03:29
  
  Published by: user13385347 on August 25, 2011 03:32

  You must give the alias to the location of the cube source within the @xref function.

  An example is

  @XREF("_RevCube_","Prg_Queue","Training Revenue","ServiceType")
  

  See the technical reference Essbase for more details

  http://download.Oracle.com/docs/CD/E12825_01/EPM.111/esb_techref/frameset.htm?CopyRite.htm

  Kind regards
  Brig.

• calculation of the Manager 11.1.2.3.700 psu 21292109

  Hello

  I am applying this compatibility IE 11 fix.  However, it is a sine qua non for patch ADF (apply MLR ADF Patch 21240419).  I can't do the syntax works to patch ADF.

  I think he needs to get a deeper level either YES (I think, the implementation of the Hyperion cannot be classified to Stand Alone)

  Following does not work.

  opatch apply 21240419 - oh E:\app\Oracle\Middleware\oracle_common - jre E:\app\Oracle\Middleware\jdk160_35

  Any recommendation?  My lsinventory on the following path works.

  opatch.bat lsinventory - oh E:\app\Oracle\Middleware\oracle_common - jdk E:\app\Oracle\Middleware/jdk160_35

  Thank you.

  Try opatch apply 21240419\oui - oh E:\app\Oracle\Middleware\oracle_common - jre E:\app\Oracle\Middleware\jdk160_35

  See you soon

  John

• vSphere device Replication Manager will not deploy

  Dear people of the future: this is what we have found so far: (http://xkcd.com/979/)

  Install us a vCenter Site Recovery Manager system and have a devil of a time on a vCenter deploy the model to the OVF for the VR device. Error message is "the OVF package uses features that are not supported. "Unsupported section ' {http://www.vmware.com/schema/ovf} vServiceDependencySection' (Extension of vCenter vService dependency)"

  A vCenter is protected and has successfully complete connection, mapping and created the placeholders with vCenter B (off site). When I go to step of the vSphere replication 1 to deploy the aircraft, the model of the FVO shows the correct location of my vCenter server and two servers RS for A and B are configured the same (physical SRM with SQL 2 k 8, vCenter virtual appliance).

  I can force it to use the model of the FVO directly from my SRM server, but then the vSphere replication process will not go past step 2 (reconfigure the VR device).

  In addition, I don't see a "VMware VirtualCenter Management Webservices" service on the vCenter server A or B so I don't think that is the question.

  Thoughts?

  Victor.

  He solved. When I went to run updates on the server vCenter Server, he said that it was waiting for a reboot because of previous updates. A bounced and everyone is happy! Thank you for helping me to talk about it through!

• How to migrate EAS Business Rules for Calc Manager in 11.1.2.1 (without using EPMA)

  Hi all

  for the moment, we are on 11.1.2.1 and one more late upgrade scheduled to 11.1.2.3, use Calc Manager rather than the rules Business (EAS). Therefore, I would like to upgrade to business at Calc Manager rules, but without using EPMA (we would still use the classic Planning Administration). I read several documents and sites, but I was unable to find a way to do... Does anyone have a how or documentation about my problem?

  Thank you very much

  André

  P.S.: Maybe to make it a bit clearer: I won't spend 11.1.2.1 to 11.1.2.2. I would only use Calc Manager instead of business EAS rules 11.1.2.1 and I couldn't find anything that shows how or if it is possible to migrate from the business rules to Calc Manager (without using EPMA).

  You can change the method of calculation of the Manager of Calc application. I replied to your message in the Manager area of Calc.

  Concerning

  Celvin

• [8i] help with function with parameters (for the calculation of the work)

  Let me start by saying, I've never written a function before, and I do not have access to create a feature in my database (that is, I can't test this feature). I am trying to achieve a function I can ask my IT Department to add for me. I hope that someone can take a look at what I wrote and tell me if this should work or not, and if it's the right way to go to solve my problem.
  
  I'm creating a function to make a very simple calculation of work (add/subtract a number of days to a date in the calendar).
  
  The database, I work with has a table with the schedule of work. Here is a sample table and sample data, representative of what is in my work table calendar:
  

  CREATE TABLE caln
  (     clndr_dt     DATE,
       shop_days     NUMBER(5)
       CONSTRAINT caln_pk PRIMARY KEY (clndr_dt)
  );
  
  INSERT INTO     caln
  VALUES (To_Date('01/01/1980','mm/dd/yyyy'),0);
  INSERT INTO     caln
  VALUES (To_Date('01/02/1980','mm/dd/yyyy'),1);
  INSERT INTO     caln
  VALUES (To_Date('01/03/1980','mm/dd/yyyy'),2);
  INSERT INTO     caln
  VALUES (To_Date('01/04/1980','mm/dd/yyyy'),3);
  INSERT INTO     caln
  VALUES (To_Date('01/05/1980','mm/dd/yyyy'),3);
  INSERT INTO     caln
  VALUES (To_Date('01/06/1980','mm/dd/yyyy'),3);
  INSERT INTO     caln
  VALUES (To_Date('01/07/1980','mm/dd/yyyy'),4);
  INSERT INTO     caln
  VALUES (To_Date('01/08/1980','mm/dd/yyyy'),5);
  INSERT INTO     caln
  VALUES (To_Date('01/09/1980','mm/dd/yyyy'),6);
  INSERT INTO     caln
  VALUES (To_Date('01/10/1980','mm/dd/yyyy'),7);
  INSERT INTO     caln
  VALUES (To_Date('01/11/1980','mm/dd/yyyy'),8);
  INSERT INTO     caln
  VALUES (To_Date('01/12/1980','mm/dd/yyyy'),8);
  INSERT INTO     caln
  VALUES (To_Date('01/13/1980','mm/dd/yyyy'),8);
  INSERT INTO     caln
  VALUES (To_Date('01/14/1980','mm/dd/yyyy'),9);

  The table includes since 01/01/1980 but 31/12/2015.
  
  I have written (and validated) this parameter query that performs the calculation of my working day (mday):

  SELECT     cal.clndr_dt
  FROM     CALN cal
  ,     (
       SELECT     cal.shop_days+:mdays     AS new_shop_days
       FROM     CALN cal
       WHERE     cal.clndr_dt     =:start_date
       ) a
  WHERE     cal.shop_days     = a.new_shop_days
  AND     ROWNUM          =1
  ORDER BY     cal.clndr_dt;

  Based on this request, I created the following function (and I have no idea if it works or if the syntax is right, etc..):

  CREATE OR REPLACE FUNCTION add_mdays 
       (start_date     IN DATE,
       mdays          IN NUMBER(5))
  RETURN     DATE 
  IS
       new_date DATE;
  BEGIN
  
       SELECT     cal.clndr_dt
       FROM     CALN cal
       ,     (
            SELECT     cal.shop_days+mdays     AS new_shop_days
            FROM     CALN cal
            WHERE     cal.clndr_dt     =start_date
            ) a
       WHERE     cal.shop_days     = a.new_shop_days
       AND     ROWNUM          =1
       ORDER BY     cal.clndr_dt;
  
       RETURN     new_date;
  
  END add_mdays;  //edit 9:31 AM - noticed I left off this bit

  I'm also not sure how to do to have the function handle results that would return a date outside the range of dates that appear in the table (prior to 01/01/1980 or after until 31/12/2015 - or, another way to look at what was, before the caln.clndr_dt or the caln.clndr_dt MAX value MIN value).
  
  My goal is to be able to use the function in a situation similar to the following:
  
  First of all, here is a sample table and data:

  CREATE TABLE orders
  (     ord_no          NUMBER(5),
       plan_start_dt     DATE,
       CONSTRAINT orders_pk PRIMARY KEY (ord_no)
  );
  
  INSERT INTO orders
  VALUES (1,To_Date('01/08/1980','mm/dd/yyyy'));
  INSERT INTO orders
  VALUES (2,To_Date('01/09/1980','mm/dd/yyyy'));
  INSERT INTO orders
  VALUES (3,To_Date('01/10/1980','mm/dd/yyyy'));

  And here's how I would use my function:

  SELECT     orders.ord_no
  ,     orders.plan_start_dt
  ,     add_mdays(orders.plan_start_dt, -3) AS prep_date
  FROM     orders

  Thus, the function would allow me to come back, for each command in my table of orders, the date is 3 days working (mdays) before the start of the plan of each order.
  
  I go about it the right way? I have to create a function to do this, or is there a way for me to integrate my request (which makes my mday calculation) in the example query above (eliminating the need to create a function)?
  
  Thank you very much in advance!
  
  Published by: user11033437 on February 2, 2010 08:55
  Fixed some typos in the last insert statements
  
  Published by: user11033437 on February 2, 2010 09:31 (fixed some syntax in the function)

  Hello

  Ah, referring to Oracle 8 and is not not able to test your own code makes me nostalgic for the good old days, when you have entered your cards and led to a window to the computer center and waited an hour for the work to be performed and then seen printing to find that you had made a typo.

  If you write functions, you should really test yourself. Like all codes, functions forge be written small not: write a line or two (or sometimes just a part of what would later become a single line), test, make sure it is running properly and repeat.
  Ideally, your employer must create a pattern of development in a development database that you can use.
  You can legally download your own instance of Oracle Express Edition free; just be careful not to use features that are not available in the database where the code will be deployed.

  You need a function to get the desired results:

  SELECT       o.ord_no
  ,       o.plan_start_dt
  ,       MIN (e.clndr_dt)     AS prep_date
  FROM       orders     o
  ,       caln          l
  ,       caln          e
  WHERE       l.clndr_dt     = o.plan_start_dt
  AND       e.shop_days     = l.shop_days - 3
  GROUP BY  o.ord_no
  ,            o.plan_start_dt
  ;
  

  It would be more effective (and somewhat simpler) If you've added a column (let's call it work_day) identified whether each line represents a work_day or not.
  For each value of shop_days, exactly 1 row will be considered as a working day.
  Then, the query may be something like:

  SELECT       o.ord_no
  ,       o.plan_start_dt
  ,       e.clndr_dt          AS prep_date
  FROM       orders     o
  ,       caln          l
  ,       caln          e
  WHERE       l.clndr_dt     = o.plan_start_dt
  AND       e.shop_days     = l.shop_days - 3
  AND       e.work_day     = 1
  ;
  

  You can use the analytic LAG function to populate the work_day column.

  A function would certainly be useful, although perhaps slower.

  The function you have posted has some errors:
  an argument can be stated under NUMBER (5); Just NUMBER.
  (b) when you SELECT in PL/SQL, as you do, you must SELECT a variable to store the results.
  (c) ROWNUM is arbitrary (making it useless in this problem) unless you draw a neat subquery. I don't think you can use ORDER BY in subqueries in Oracle 8. Use the ROW_NUMBER analytic function.
  (d) the service must end with an END statement.

  Given your current caln table, here's how I would write the function:

  CREATE OR REPLACE FUNCTION add_mdays
       ( start_date     IN           DATE          DEFAULT     SYSDATE,
         mdays          IN           NUMBER          DEFAULT     1
       )
  RETURN     DATE
  DETERMINISTIC
  IS
       --     add_mdays returns the DATE that is mdays working days
       --     after start_date.  (If mdays < 0, the DATE returned
       --     will be before start_date).
       --     Work days do not include Saturdays, Sundays or holidays
       --     as indicated in the caln table.
  
       new_date     DATE;          -- to be returned
  BEGIN
  
       SELECT     MIN (t.clndr_dt)
       INTO     new_date
       FROM     caln     f     -- f stands for "from"
       ,     caln     t     -- t stands for "to"
       WHERE     f.clndr_dt     = TRUNC (start_date)
       AND     t.shop_days     = f.shop_days + TRUNC (mdays)
       ;
  
       RETURN     new_date;
  END     add_mdays;
  /
  SHOW ERRORS
  

  Production code forge be robust (which includes "fool-proofing").
  Try to anticipate what people errors might appeal to your function and correct for them where possible.
  For example, if it only makes sense for start_date at midnight, mdays to be an integer, use TRUNC in the function where soembody passes a good value.
  Allow default arguments.
  Comment of your function. Put all comments within the service (i.e. after CREATION and before the END) so that they will remain in the data dictionary.
  If, given the same arguments, the function always returns the same value, mark it as DETERMINISTIC, for efficiency. This means that the system will remember the values transmitted rather than to call the function whenever it is said to.

  I wish I could score questions such as 'Correct' or 'useful '; you get 10 points for sure.
  You posted CREATE TABLE and INSERT statements (without even be begged).
  You gave a clear description of the problem, including the expected results.
  The code is well formatted and easy to read.
  All around, one of the more thoughtful and well written questions I've seen.
  Play well! Keep up the good work!

  Published by: Frank Kulash, February 2, 2010 13:10
  Added to my own version of the function.

• aftering updated firefox to version 8.0, that the Navigator will sail is no longer to any Web site. An error window appears with "unable to connect to the server (where you point)!

  Using windows XP pro.

  One possible cause is security software (firewall) that blocks or limits Firefox or plugin-container process without informing you, possibly after the detection of changes (update) for the Firefox program.

  Delete all rules for Firefox in the list of permissions in the firewall and leave your firewall again ask permission to get full unlimited access to the internet for Firefox and the plugin-container and the update process.

  See:

  • https://support.Mozilla.com/kb/server+not+found
  • https://support.Mozilla.com/kb/firewalls

• becomes so bad that I don't know if the screen will drain or freeze until I can send it

  I don't seem to be able to use Mozilla for very long because it freezes the screen turns white or it closes and returns to something that I closed.
  I went back to mozilla to factory settings 3 times tried to erase everything that maybe isn't compatible.
  but I'm not sufficiently confident to go away

  What security (firewall, antivirus) software do you have?

  Try to remove all the rules for Firefox and the plugin-container in the permissions list in the firewall and leave your firewall again ask permission to get full unlimited access to the internet for Firefox and the plugin-container and the update process.

  See:

  • https://support.Mozilla.org/KB/server+not+found
  • https://support.Mozilla.org/KB/firewalls

• How do we take a scheduled backup of the business rules of calculation Manager 11.1.1.3?

  How do we take a scheduled backup of the business rules of calculation Manager 11.1.1.3?

  Hi Celvin,

  We have to implement something like the utility formdefutil for Web Forms. LCM is an option, however, and we are looking for all the utilities. Please let us know is it is

  Thanks for your help!

• Latest version of Lightroom will not download the RAW files of my D750. How can I get around that? Purchased Lightroom for its ability to manage RAW files and now very disappointed.

  Latest version of Lightroom will not download the RAW files of my D750. How can I get around that? Purchased Lightroom for its ability to manage RAW files and now very disappointed.

  Hi mgwno,

  Native support of Lightroom for the D750 has been added in the Lightroom update published 5.7 tonight.

  Version details:

  Lightroom 5.7: http://blogs.adobe.com/lightroomjournal/2014/11/lightroom-5-7-now-available.html

  Camera Raw 5.7: vailable.html http://blogs.adobe.com/lightroomjournal/2014/11/camera-raw-8-7-and-dng-converter-8-7-now-a

  Kind regards

  Pete