Where run as command option admin is spent on the Windows 7 operating system?

Similar Questions

• Dell Studio 1737 running the Windows Vista operating system. Hard drive errors

  My laptop Dell Studio 1737 running windows vista reports error code 2000-0146 since the PSA Diagnostics. I made diagnostics from the Dell Web site, and it reported targeted read Test failure WHD20 - 4 2 and Smart short self-test 4FH WHD16. My computer seems to work very well and boots from the hard drive normally with no problems. What patches or software downloads are what can I do to solve my problems?

  My laptop Dell Studio 1737 running windows vista reports 2000-0146 error code since the PSA Diagnostics. I made diagnostics from the Dell Web site, and it reported targeted read Test failure WHD20 - 4 2 and Smart short self-test 4FH WHD16. My computer seems to work very well and boots from the hard drive normally with no problems. What patches or software downloads are what can I do to solve my problems?

  Hello

  This Dell 2000-0146 error code is for a failed hard drive / failed.

  You will need to replace and reinstall the operating system.

  Save your data as soon as POSSIBLE.

  See you soon.

• 1.4 ore can run on the Windows Server operating systems?

  We plan to install Oracle 12 c on Windows 2012 64 bit, with ore 1.4 operating system.

  I checked the condition sine qua non of 12 c, it runs on Windows, 2012 but for ore, it was mentioned that it is running on Microsoft Windows XP, Vista or Windows 7 64-bit only.

  We also plan to install Oracle Big Data Connectors after this installation.

  Can anyone confirm what operating system that we should finally install?

  2012 Windows Server 64-bit is not yet a than oracle Enterprise R supported platform, but we invite you to try.  See the Big Data connectors User Guide for supported platforms.

  Sherry

• Get when the "not enough memory to process the command' install a new version of the Windows Installer.

  Original title: However, when you try to install the new version I get a message "not enough memory to process the order" I have 812 GB of free memory on my drive C. help!

  In response to an error 80070641 during installation of updates, I uninstalled Windows Installer with the intention to download the updated version and install my updates failed.
  However, when you try to install the new version I get a message "not enough memory to process the order" I have 812 GB of free memory on my C drive.
  Help!

  Hi Derek,.

  Please report the problem to Microsoft Community.

  According to the description, it looks like you get the error when installing a new installer as ' not enough memory to process the order'.

  I have a couple of steps that should help you with this problem.

  Method 1:

  Try these steps and check:

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following windows Help article.

  Back up the registry
  http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry

  a. Click Start > run > type regedit and press enter
  b. find the following key: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\LanmanServer\Parameters
  c. find IRPStackSize
  (d) If this value is not right click on key settings and click on new > Dword value and type IRPStackSize under the name.
  e. right click on IRPStackSize and click change
  f. Select decimal , enter a value greater than 15(maximum is 50 decimal), then click on OK.
  g. close the registry editor and restart your computer.

  Method 2:

  Try the steps mentioned in this link and check.

  Not enough memory is available to process this command.

  User action:

  Do one of the following, and then retry the command:

  a. reduce the number of running programs.

  b. remove unwanted files from the disk, the pagefile is on and restart the system.

  c. check the disk paging file for an IO error.

  d. install more memory in the computer.

  Visit the site and check:

  http://TechNet.Microsoft.com/en-us/library/cc978735.aspx

  Method 3:

  I suggest you to clear temporary folders and check if it helps, here are the steps:

  a. click Start, type folder in the search box and press enter.

  b. press the CTRL + A, that will select all the content and Remove it.

  Once you disable this, follow these steps:

  a. click Start, type Temp folder in the start search box and press ENTER.

  b. press the CTRL + A, that will select all the content and Remove it.

  I hope this helps. If you have questions more related to Windows, feel free to post here at Microsoft Community.

• Adobe CS4 Design Standard install and run successfully on a computer using Windows OS 8.1 or Windows 7 operating system?

  Adobe CS4 Design Standard install and run successfully on a computer using Windows OS 8.1 or Windows 7 operating system?

  Hello

  Adobe has not tested applications in Creative Suite 4 on Win 7 or 8.1 because it is an old product, so it may or may not work on these operating systems.

  Please check the system requirements here, system requirements | CS4 Point product

  Kind regards

  Bani

• Where can I find options DO NOT choices through the menu bar?

  If I use the 'Tools' menu item and select 'Options', Firefox crashes, requiring a reboot. I used to have a tab that allowed me to make the changes/choice that I could see in the menu options, but I have lost it and can not find in my story. If I have this open "Options" tab, I can put the tabs to open to those currently configured. I need that. Help!

  You can try to open the topic: the page of preferences via the address bar.

  Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem.

  • Put yourself in the DEFAULT theme: Firefox/tools > Modules > appearance
  • Do NOT click on the reset button on the startup window Mode safe
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

  You can check for problems with preferences.

  Delete possible user.js and files numbered prefs-# .js and rename (or delete) the file prefs.js to reset all the prefs by default, including the prefs set via user.js and pref which is no longer supported in the current version of Firefox.

  • http://KB.mozillazine.org/Preferences_not_saved
  • http://KB.mozillazine.org/Resetting_preferences

  You can use this button to go to the Firefox profile folder currently in use:

  • Help > troubleshooting information > profile directory: see file (Linux: open the directory;) Mac: View in the Finder)
  • http://KB.mozillazine.org/Profile_folder_-_Firefox

• run a while loop in separate vi, minimize the window flashing

  My apologies in advance for not including a VI; I cannot give it, cannot even provide screenshots.

  I have a state machine base with a cluster of Boolean values that are analyzed in the 'default' State, the scan index = true determining the next State. All other States to return to the default state. The State of 'stop' stop the loop with a Boolean constant = True, located inside the structure case wired to the time entry conditional loop (all States have a Boolean constant False wired to it). Apart from the cases

  statement, the wire connected to the conditional entry is connected to a Boolean indicator, ' Stop, in really. The time delay within the State of the machine while loop is currently set at 100 ms.

  In addition to the 'State' shift register, the state machine has a "boolean" shift register. All States, except one, feeds the value passed the Boolean value through to the next State (i.e. wired directly from left to right the structure of the case). The exception is the State which inverts the Boolean value, with the output of the inverter transferred to the State following and also connected to a Boolean flag, 'Show the State', the

  indicator outside the case statement but inside the while loop. All other States wire just the previous state of the Boolean value through the following State, unchanged.

  In addition to the State of the machine while loop, I have a parallel while loop (scourge of the LV forums). All entered conditional loop is connected to a local variable to 'stop, really. " A True/False case in this while loop structure contains a Subvi in the case of True value. The Boolean value of entry to the case statement is connected to a local variable for 'Show status'. The Subvi, which is in the real case is to display the State of the

  user.

  The Subvi which provides status through its frontage runs a script in python via a 'comand prompt"vi. The necessary update to the python command send is ~ 1/second. Within the Sub - VI is a 1 second delay time after execution of the code.

  It works but I'm doing some improvements with minimal impact on what I have.

  Two cases of VI properties that relate to the conduct of the State Subvi (floating or default, modal does not at all):

  1. with "Firm when previously closed" selected, the window switches VI (via the main switch VI) open and closed but when it is open there is the a second window flash that could cause seizures in some users.

  2. with "closes when previously closed" deselected, the window remains open and it is difficult to tell the difference between the running state and is not running. In addition, the Subvi window will not be reduced for this option.

  Is there a little invasive change, I have the code in force to stop a second flash described in #1 above and activate / deactivate the Subvi status window?

  Thank you

  Jeff

  
  

• I have a pc running windows xp and im receives the window\system32\config\system message

  I have a pc running windows xp and im receiving the message window\system32\config\system I do not have a cd-rom drive, how do I get a copy of this disc help please

  Hello

  · What is the number and the model of the computer?

  · Were there any changes made on the computer before the show?

  You can check the link that contains information about the same: how to recover from a corrupted registry that prevents Windows XP startup: http://support.microsoft.com/kb/307545

  For the installation disc, you may need to contact the manufacturer of the computer.

• Windows Vista operating system supports the TRIM command.

  Operating system Windows Vista does support the TRIM for Solid State Drives command.

  According to this, it doesn't.

• Trying to run Hallmark Card V2 and it "goes beyond" the window and will not reduce in size

  I am new to Windows 7.  An old program I have and seems to work - so-Hallmark Card Studio V2 is above all designed for Windows XP.  "However, when you open the program it" overflows the monitor window and the symbol of "boxes" at the top right normally used to enlarge/reduce the size of the window is covered on mainly off screen on the monitor.  So I can't minimize the window to fit something like 3/4 of the monitor.  I tried all the keyboard traits that affect Windows, but the only thing that works is to reduce the window to nothing or on-screen "overfull".  I tried to run the program under different settings from earlier Versions, but which has no effect either.

  Any suggestion is appreciated.  Thank you!

  WEC

  Your best bet is to contact the developer of Hallmark card because we have no idea if it's even compatible with win 8 and knows virtually nothing about his works.

• can't open internet options in the control panel by using the xp professional operating system

  Cannot open internet option in the Control Panel, click on it and nothing happens.  Toolbar lost on internet explore

  Hello

  1 could you please elaborate on the issue that you are facing?
  2. have you made changes on the computer recently?
  3. what versiopn of internet explore is installed on your computer?

  Here is a workaround to open Internet Options.
  Click Start and type inetcpl.cpl in the race and press ENTER.

  I hope this helps.

• where can I find the driver for GMA 900 and Windows XP operating system please.

  I have a desktop computer with Intel D915GAG motherboard and no plug PCI.  I installed Windows XP, but the Device Manager displays another device with yellow question mark and the display is abnormal and cannot be changed.  I think I need the driver to fix this problem.  Thank you.

  Here is the site of Intel . If the video is on board. I would say that's it. I also want to install the drivers for the chipset. If you have not yet installed the

• Running out of disk space HARD - Question on the Windows folder size

  Hello! I am troubleshooting my HARD drive space. I have a 'C' HDD 16 GB with nearly 0 MB space left (fluctuates probably due to created restore points).

  In any case, I discovered that my Windows folder contains about 7.7 GB of files. (I have Win XP Home Ed, 2002, SP3 installed - with MANY updates that have been installed over the years) 7.7 GB seems a lot.  Random check on the web (not sure how reliable replica is) I see less than 2 GB is what should be there.

  I don't think that there are many 'other' stuff in there, certainly nothing that I placed there. is there a way to check / clean this folder?

  Please do not suggest to re - install Windows as the solution, since at that time, I will buy another computer first.  then put in shape this one. It is clocked at 2.66 GHz Intel Pentium, so not ready to junk food she still.

  Thanks for your suggestions. Best regards, Frank V

  Frank

  Your list of the most fragmented files that partially reveals the magnitude of your problem. Note that the list does not display very large files that have less than 797 fragments. There are also many small and medium-sizes of the files fragmented with less than 797 fragments. A notable omission in your list, this is the System Volume Information folder. I can't believe that it is not fragmented, she must be on this part of the list is not displayed.

  To defragment by using with Windows XP Disk Defragmenter, you need a bit less 15%. Defraggler is my favorite Defragmenter, but I doubt that it will succeed on your C partition. With Defraggler you can defragment single files, except some files, including those related to safety programs. You must try to reach 20% of free disk space.

  Your swap file is severely fragmented and illustrated perfectly why the possibility of using the "let Windows manage" is not the best solution if you want the better system performance. Minimum setting fixed maximum = pagefile avoids what you see on your system. Unfortunately with a populated partition, it is very difficult if not impossible to resolve completely without having to reinstall the operating system. However, trying to mitigate the impact of what you see, it's something to watch much later in the restoration, the functioning of your computer.

  My previous to Outlook Express references were specifically directed against this program. Outlook is a totally different program and solutions for Outlook Express do not apply to Outlook.

  You cannot compact Outlook pst files and archives, except those who created versions of Outlook prior to Outlook 2003. You can empty deleted item folder and you must first check that it is empty. I would then back up your Outlook Archives on an external drive or flash before attempting to move the locations of archive. Once you have moved the archive folders successfully I would then move messages from your current folders to the archive folders. If you archive the current materials first of all you have more to lose if the process of change the default location of the folder goes awry. Then, you can archive your current messages and change the default location of the current file. You can move messages current return from archives as a last step if you feel the need to do so.

  I copied a few instructions from an external source on how to change the default locations. I hope you find these useful.

  To change the location of database of Microsoft Outlook, the OUTLOOK file. PST is to be moved. In Windows XP, you can find this file in the folder C:\Documents and Settings\loginname\Local Settings\Application application\Microsoft\Outlook\ and in Windows Vista, you can find it in the C:\Users\loginname\AppData\Local\Microsoft\Outlook\ folder. After Outlook is closed, the OUTLOOK folder. PST can be moved easily using Windows Explorer by cutting (CTRL-X) and paste (CTRL-V) in the personal folder on the partition data (for example D:\loginname\Outlook). Now, the file is deleted from the original location, Outlook will present an error message because the database can not found. Accept the error message, navigate to the new location of the OUTLOOK. PST file and restart Outlook.

  ATTENTION: If automatic archiving is enabled, the ARCHIVE file. PST must be moved as well! This file can be moved to the same location as OUTLOOK. PST, following the same procedure.

  Source:

  http://www.optimizingpc.com/miscellaneous/changing_storage_location_personal_folders.html

  Hope this helps, Gerry Cornell

• In a configuration of dual boot Vista/Vista, where are the operating system files stored in another copy of Vista?

  In one, the operating system is in the C:\Windows folder. Where the operating system is stored on the 2nd partition?

  Hi BDTT.

  If you have installed the Windows vista operating system in a dual-boot on two partitions Setup then you find another folder Windows in the second disc of the partition.

  For example: C:\Windows and D:\Windows.

  When you start in any partition the root drive letter would change to the C:\ drive.

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• I have a WIndows 7 Ultimate operating system failure and required a drive for a clean install. I have the product key, but Microsoft offers no English option.

  I have a Windows 7 Ultimate active computer that was swarming (STRONGLY) of malware/virus/junk files/adware...

  I think I have cleaned out, but want to do a clean to be sure install, but I have no partition recovery (may be erased by a virus?) and no recovery dick.

  I went to the Microsoft website and entered my product key.  He has been recognized as Windows 7 Ultimate, but when I had to choose a language, English was not available.

  Any solution, or should I continue to use the computer and all hope is clean?

  EDIT - I installed the windows 10 (using an ISO image) on Windows 7.  I do not enter the product key when asked (the program said I could jump at this stage of the installation).  Installation went well.

  I then checked to activate Windows 10 - it activated without any difficulty.

  I will now try a clean install...

  For 5 years, Microsoft made it fairly easy for users of the Windows 7 operating system to get reinstall media. If you have lost your support disc or installation retail collection; either it has been damaged or defective; You can download a copy of the edition that you have licensed from a membership site called Digital River. More recently, Microsoft ended the availability to reinstall media that you can download as a. File ISO in Digital River, which is a digital reproduction of an optical disc.

  It was particularly convenient for people who could not easily get the manufacturer's recovery media, did not want to pay the fees required to get or preferred a clean configuration without the software packaged manufacturers or even a recovery partition does not work. It's easy to use, all you had to do was reinstall and reactivate using the product key located on the certificate of authenticity and download all the drivers on the manufacturers website.

  Given that this option is no longer available, what are your options? See the article for more details:

  How to: What are my options for Windows 7 reinstall media?