I have a pc running windows xp and im receives the window\system32\config\system message

Similar Questions

• Problems starting Windows XP. I get "the following file is missing or damaged. \WINDOWS\SYSTEM32\CONFIG\SYSTEM"message.

  Original title: start windows xp questions

  Windows xp. When I try to start the system I get the message "the following file is missing or damaged. \WINDOWS\SYSTEM32\CONFIG\SYSTEM... I have an xp disk and code but not sure if it is the origanal. When I start the computer, it does not start the windows xp disc.

  If you get the message hal.dll missing, your system is still booting from the hard drive and do not boot from the XP Recovery Console CD (I hope that you have created).

  There is no hal.dll on the CD you made if all goes well.

  You must enter the BIOS of your system and make the first boot from the CD to your Pcakard device Bell looks like it firstly, instead to focus first on the HARD drive (make the drive the second choice for now).

  Searching the Internet, I found a message that says to enter the Packard Bell BIOS you must do this:

  Users of Packard Bell, you can access the BIOS set up by pressing the keys F1, F2 or del

  I don't have a PB, so I can't say for sure if that works, or what to do after that - you will need to look around the BIOS for things like the boot order boot priority, etc. and make the CD drive the first choice, second choice HARD drive, save the settings, then you can boot from the CD I hope that you have made using these instructions.

  Generally when the system detects a CD is inserted, it will sell you a message like this:

  Press any key to boot from CD...

  Then all the button and follow the rest of the instructions...

• Windows XP machine error - \WINDOWS\SYSTEM32\CONFIG\SYSTEM.

  Original title: \WINDOWS\SYSTEM32\CONFIG\SYSTEM.

  I have this error

  \WINDOWS\SYSTEM32\CONFIG\SYSTEM

  I deleted something in the registry and I don't have the cd to fix it. Help, please?

  Hello

  According to the guidelines of the error, it seems to be a mistake to start and will require a Windows disk to resolve the same. Since you don't have a Windows XP installation disk, I suggest you to arrange for a Windows XP installation disc that fits the same edition and the version installed on your machine.

  Twelve, follow this link and check if the problem persists.

  How do I recover from a corrupted registry that prevents Windows XP startup

  Hope the helps of information. Please post back and we do know.

  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• HP mini 110-1129nr with windows xp home edition, following the file is missing or corrupt \windows\system32\config\system model doesn't have a cd/dvd drive. Help, please!

  HP mini 110-1129nr with windows xp home edition, on said boot computer could not start because the following file is missing or corrupt \windows\system32\config\system computer has no cd/dvd drive. Computer does not load in safe mode, I ran disk hard main test self test it says completion test: failure, check the status: 7 (filled with the read element of the test failed). Help.

  You need an external DVD drive to get the repair will.

  Also the device you own does not seem to have built in the recovery partition. I'm not sure about later versions of this machine, however, it is best to check with HP.

  The problem is that there is a corruption of the registry on your OS or the system could not find where the registry files are due to system files or boot corrupted file.

  A repair can be made with an external DVD, the worst case, is that if the repair doesn't work you reinstall Windows.

  See this page from HP

• Satellite A100-207 - \windows\system32\config\system is corrupt

  Hello

  Can someone help me with the following problem. With regard to a Toshiba Satellite A100-207 with windows XP media edition

  When starting the laptop hangs with error * \windows\system32\config\system is corrupt *.

  This article is the closest to the problem http://support.microsoft.com/kb/307545. but the warning in the article on the point is not to use with circumspect OEM on more facilities of he made me.

  I have lost the disc of recovery (recently).
  But were able to boot the laptop from USB using a cutter (lite) version of windows.

  The scene in the article copy c:\windows\repair\system c:\windows\system32\config\system fails because the file does not exist (the other files do however).

  In this folder there is a system.bak, this would solve the problems like the laptop boots windows logo screen then after 5 minutes restarts and just go around and around a certain extent.

  There is also a file system.sav in the folder windows\system32\config using this all goes someway to to solve the problem, the laptop restarts and resumes product set-up with off course fails has so I don't have the recovery disk.

  I would be grateful if someone could help with the problem

  Regards Garry

  > but the warning in the article on the point is not to use with circumspect OEM on more facilities of he made me.

  You can ignore this warning, you have no other choice than to try to fix this system following the article in the Microsoft Knowledge base.

  But to be honest, I doubt that the system would run smoothly after this work around.

  I would recommend the new installation of the OS.
  If you don t have a Toshiba Recovery disk, you can use a Microsoft Disk to reinstall the system. Essential drivers are available Toshiba driver Web site.

• file missing or corrupt windows\system32\config\system

  HELP - by on the title I did: -.

  The full, first part, follow these steps:

  1. Insert the diskette of starting Windows XP in the floppy drive, or insert the Windows XP CD into the CD-ROM drive and restart the computer.
     Click to select all of the options required to start the computer from the CD-ROM drive if you are prompted to do so.
  2. When the "Welcome" screen appears, press R to start the Recovery Console.
  3. If you have a dual-boot or multiboot, select the installation that you want to access from the Recovery Console.
  4. When you are prompted to do so, type the administrator password. If the administrator password is blank, just press ENTER.
  5. At the Recovery Console prompt, type the following lines, pressing ENTER after you type each line:
     MD tmp
     copy c:\windows\system32\config\system c:\windows\tmp\system.bak
     copy c:\windows\system32\config\software c:\windows\tmp\software.bak
     Copy c:\windows\system32\config\sam c:\windows\tmp\sam.bak
     copy c:\windows\system32\config\security c:\windows\tmp\security.bak
     copy c:\windows\system32\config\default c:\windows\tmp\default.bak

     delete c:\windows\system32\config\system
     delete c:\windows\system32\config\software
     Delete c:\windows\system32\config\sam
     delete c:\windows\system32\config\security
     Delete c:\windows\system32\config\default

     Copy c:\windows\repair\system c:\windows\system32\config\system
     copy c:\windows\repair\software c:\windows\system32\config\software
     copy c:\windows\repair\sam c:\windows\system32\config\sam
     Copy c:\windows\repair\security c:\windows\system32\config\security
     Copy c:\windows\repair\default c:\windows\system32\config\default

  6. Type exit to quit the Recovery Console. Your computer will restart.

  Note This procedure assumes that Windows XP is installed in the C:\Windows folder. Make sure that replace C:\Windows with the appropriate dossier_Windows if it is a different place.

  If you have access to another computer, to save time, you can copy the text in step 5, and then create a text file called "Regcopy1.txt" (for example). To use this file, run the following command when you start in Recovery Console:

  batch regcopy1.txt

  With the command batch to the Recovery Console, you can process all the commands in a text file in the order. When you use thebatch command, you do not have to manually type as many commands.

  Second part

  To perform the procedure described in this section, you must be logged in as administrator or an administrative user (a user who has an account in the Administrators group). If you use Windows XP Home Edition, you can connect as an administrative user. If you sign in as an administrator, you must first start Windows XP Home Edition in safe mode. To start the computer in Windows XP Home Edition in safe mode, follow these steps.

  Note Print these instructions before continuing. You cannot view these instructions after you restart the computer in Mode safe. If you use the NTFS file system, also print the instructions from article KB309531 of the Knowledge Base. Step 7 contains a reference to the article.

  1. Click Start , click shut down (or click turn off computer ), click restart , and then click OK (or click restart ).
  2. Press the F8 key.

     On a computer that is configured to start to multiple operating systems, you can press F8 when you see the boot menu.

  3. Use the arrow keys to select the appropriate safe mode option and press ENTER.
  4. If you have a dual-boot or multiboot system, use the arrow keys to select the installation that you want to access, and then press ENTER.

  In part two, you copy the registry of their location saved files by using the system restore. This folder is not available in the Recovery Console, and is usually not visible on the typical use. Before you begin this procedure, you must change several settings to make the folder visible:

  1. Start Windows Explorer.
  2. On the Tools menu, click folder options .
  3. Click the view tab.
  4. Under hidden files and folders , select Show hidden folders and files , and then click to clear theHide protected (recommended) operating system files check box.
  5. When appears in the dialog box confirming that you want to display these files, click Yes .
  6. Double-click the drive where you installed Windows XP to display the list of folders. If it is important to click on the correct drive.
  7. Open the System Volume Information folder. This folder is not available and is dimmed because it is defined as a file hidden doubling.

     Note This folder contains one or more _restore {GUID} folders such as "_restore {87BD3667-3246-476B-923F-F86E30B3E7F8}.

     Note You may receive the following error message:

     C:\System Volume Information is not accessible. Access is denied.

     If you receive this message, see the following article in the Microsoft Knowledge Base for access to this folder and continue with the procedure:

     309531 (http://support.microsoft.com/kb/309531/) how to access the System Volume Information folder
  8. Open a folder that was created not at the present time. You may need to clickDetails on the view menu to see when these folders were created. There may be one or more folders starting with "RPx under this folder. Here are the restore points.
  9. Open one of these folders to find a subfolder of the snapshot. The following path is an example of a folder path to the snapshot folder:
     C:\System Volume \RP1\Snapshot Information\_restore {D86480E3-73EF-47BC-A0EB-A81BE6EE3ED8}
  10. Starting from the Snapshot folder, copy the following files to the C:\Windows\Tmp folder:
      • _REGISTRY_USER_. DEFAULT
      • _REGISTRY_MACHINE_SECURITY
      • _REGISTRY_MACHINE_SOFTWARE
      • _REGISTRY_MACHINE_SYSTEM
      • _REGISTRY_MACHINE_SAM
  11. Rename the files in the C:\Windows\Tmp folder as follows:
      • Rename _REGISTRY_USER_. DEFAULT DEFAULT
      • Rename _REGISTRY_MACHINE_SECURITY to SECURITY
      • Rename _REGISTRY_MACHINE_SOFTWARE to SOFTWARE
      • Rename _REGISTRY_MACHINE_SYSTEM to SYSTEM
      • Rename _REGISTRY_MACHINE_SAM to SAM

  These files are the system restore registry files. Because you used the registry file that the Setup program created, this registry does not know that these restore points exist and are available. A new folder is created with a new GUID under System Volume Information and a restore point is created that includes a copy of the registry files that were copied during the first part. Therefore, it is important not to use the most recent folder, especially if the time stamp on the folder is the same at the moment.

  The current configuration of the system is not aware of the previous restore points. You must have a previous copy of the registry to a previous restore point to make previous restore available again points.

  The registry files that were copied to the Tmp folder in the C:\Windows folder are moved to ensure the files are available in the Recovery Console. You use these files to replace the registry files currently in the C:\Windows\System32\Config folder. By default, the Recovery Console has limited access to records and cannot copy the files in the File System Volume.

  Note The procedure described in this section assume you are using your computer with the FAT32 file system. For more information on how to access the folder of information system with the NTFS file system Volume, click on the number below to view the article in the Microsoft Knowledge Base:

  309531 (http://support.microsoft.com/kb/309531/) how to access the System Volume Information folder

  Third part

  In part three, you delete the existing registry files, and then copy the system restore registry files to the C:\Windows\System32\Config folder:

  1. Start the Recovery Console.
  2. At the command prompt, type the following lines, pressing ENTER after you type each line:
     del c:\windows\system32\config\sam

     del c:\windows\system32\config\security

     del c:\windows\system32\config\software

     del c:\windows\system32\config\default

     del c:\windows\system32\config\system

     copy c:\windows\tmp\software c:\windows\system32\config\software

     copy c:\windows\tmp\system c:\windows\system32\config\system

  copy c:\windows\tmp\sam c:\windows\system32\config\sam

  Copy c:\windows\tmp\security c:\windows\system32\config\security

  Copy c:\windows\tmp\default c:\windows\system32\config\default

  Note Some of these command lines may be wrapped for readability.

• Type exit to quit the Recovery Console. Restart the computer.

Note This procedure assumes that Windows XP is installed in the C:\Windows folder. Make sure that replace C:\Windows with the appropriate dossier_Windows if it is a different place.

If you have access to another computer, to save time, you can copy the text in step 2, and then create a text file named "Regcopy2.txt" (for example). To use this file, run the following command when you start in Recovery Console:

regcopy2.txt batch

Fourth part

1. Click Start and then click all programs .
2. Click on Accessories , then System Tools .
3. Click System Restore , and then click restore to a previous RestorePoint .

and now when I go to the fourth part and try to connect, it says I need to activate windows to open a session. If I click on Yes, the computer crashes just in my background image, if I click on no, this Chuck me back to the log in page... What is wrong with this blooming thing

Please HELP - it took three days of messing around and actually the Ive got nowhere!

OOOOO... should start here:
The question was preceded by a loss of power, aborted reboot or abnormal termination? (this includes pulling and buttons power)
These can cause corruption in the file system that must be fixed before you do anything else.
If none of these events occurred (or even if they have not taken place), you must verify the integrity of your file system before anything else (especially "try" things).
There is zero logic to start try to copy files to a hard drive that has a corrupted file system, so this must be first using the XP chkdsk program and run chkdsk can solve your problem completely.
Use the XP Recovery Console to check the file system on your HARD drive and fix the problems and then try to start your system - this may be all you need to do.  Or, you are welcome to just start trying things that might work.
Start the Recovery Console Windows using an XP bootable installation CD, or create a bootable XP Recovery CD of Console.
This is not the same as recovery disks that may have come to a store to purchase the system.  If you don't know what kind of bootable CD, you, do a CD of bootable XP Recovery Console and do not forget.
After booting into the Recovery Console, you should be in this folder:
C:\WINDOWS
For each of your hard disk partitions, you must then run:
Chkdsk /r
For example, at the Recovery Console prompt, enter:
CHKDSK c: /r
Let chkdsk finish to correct the problems, he could find.  It may take a long time to complete or seem to be 'glued '.  Be patient.  If the HARD drive light flashes, it's something.  Keep an eye on the amount of the percentage to be sure that it is still making progress.  It may even seem to go back sometime.
The chkdsk/r must be completed without error, you may need to run several times until it does.
Remove the CD and then type "exit" to exit the RC and restart the computer and the report with your progress.

Do, or do not. There is no test.

I need YOUR voice and the points for helpful answers and propose responses. I'm saving for a pony!

• Windows\System32\Config\System.log corrupted

  Sometimes when I turn on my PC I get a message error "C:\windows\system32\config\system.log is damaged and unreadable.  Please run the chkdsk utility. "Sometimes, when I turn it on it freezes in windows journal page, or just after the connection often (accompanied by a long beep after these two occurrences).  I have run chkdsk but it does not appear to have contributed.  Sometimes, the PC boots normally.

  If anyone has any ideas how I can fix this I would be very grateful.  Thank you.

  I guess that you have run the chkdsk utility with the "/ F" or "/ R" option.

  Another thing you can try is to clear your system log file.  To do this, start the event viewer:
  Start-> Run-> "eventvwr.msc".
  or
  Start-> programs-> administration-> event viewer tools.

  Once it starts, find the 'system' in the left column, right-click on it and select "clear all events.
  I hope that this will reset the file and get rid of your mistakes.

  HTH,
  JW

• Windows XP could not start because the following file is missing or corrupt: \WINDOWS\SYSTEM32\CONFIG\SYSTEM

  System:

  Toshiba Satellite A-75

  WIndows XP Home Edition
  Fully updated with Svc Pk 3
  HITACHI Travelstar hard drive 80 gig

  Nice day

  I'm getting this ' file is missing or damaged:------WINDOWS-SYSTEM32-CONFIG-SYSTEM ' error and Windows does not start in the F8 boot options. When I disable the auto reboot, I get a BSOD 51 registry error, consistent with the file "missing or corrupt" error Surprisingly "Recovery Console" works so I used to run chkdsk. This has not solved the problem, but even once, surprisingly, the utility reported no fixed error. Ok. I do research online (using another computer of course) and check out the many tips that I copy some files in my "c:\windows\repair" folder in the folder 'system '. Before I had time to do that, however, I found an article from Microsoft stating that this should not be done if you have an OEM System... what I'm doing. Apparently, hives system on these OEM installed OS set other passwords that can permanently block you on your records if you use this method. Thanks for the warning. My system restore disc is nothing more than a tool of re-insall OS that will wipe all my data in the process, and this is not desirable. Currently, I see again all my data on the drive by using the "recovery console". I'm ready to thread the needle on this one in the hope of re - access the operating system, although in some limited capacity. Any help would be greatly appreciated.

  When you run chkdsk in RC, did you use the /r switch? This is the key! In other words, this should be the command:

  Chkdsk /r

  (there is a space before the slash)

  Moreover, KB307545 can be run safely on most OEM XP installations. Of course, nothing is guaranteed 100%.

  Before you do this or else, you really must ensure all data is stored safely. One way to do this is to start on a live Linux CD and then copy the files to an external hard drive. Another way is to connect the problem hard drive into a working PC and copy the files in this way. This could be done by the servo drive or with an adapter like this:

  http://www.Newegg.com/product/product.aspx?item=N82E16812161002&TPK=N82E16812161002

• I recived the windows\system32\config\system damaged or missing error today

  I got the windows\system32\config\system error damaged or missing today and do the chkdsk c:/r on it and he said: "The Volume appears to contain one or more unrecoverable problems"... is it still fixable or have I just lost my HD?

  I can't do a cause of model, that I built it 2 years ago.
  I run windows xp professional, service Pack3, all updates
  I use spybot, avg, windows defender and malwarebytes
  Caused the computer to restart 4 times and I didn't know it until it was too late cause we had electricians turning the power on/off and I didn't know my computer kept on again and restart.
  I have a cdrom to work and I still have the xp cd.

  Note: I tried to do a repair of windows, go to the Setup screen. But there was no repair to the screen only option how much space is free, if I wanted to install or delete a partition. I have nothing just to the left.

  If chkdsk does not resolve your hard drive, then you will need in the end not completely reformat your hard drive and reinstall Windows.  Before doing so, however, you must save as much data as you can to an external USB hard drive.  If your system boots, then save as much as the hard drive will allow.  If your system does not start, then you should try to boot from a bootable CD that will support USB drives (I prefer free Linux Livecd such as Knoppix), then again until you can.

  To reinstall Windows, many computers have a recovery Partition that will restore your computer to its State as purchaser which can be activated by pressing a combination of keys special at the time where the manufacturer splash screen goes back to the start.  Read quickly, find the appropriate key combination and press it to reinstall Windows - well in your case, it seems that you have an installation CD.  If the request to do a 'Quick format' or 'Regular Format', do not select Quick format.

  HTH,
  JW

• windows\system32\config\system missing or corrupted display.

  I was remove two conflicting security, CA & Ad-Aware programs.  Everything worked great until I rebooted.  Then the black the Windows\system32\config\system missing or damaged screen appeared.  Is there a way to recover my data and restore my computer without the disk restor?

  Provide information on your system, the better you can:

  What is your system brand and model?

  Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..

  The question was preceded by a loss of power, aborted reboot or abnormal termination?  (this includes the plug pulling, buttons power, remove the battery, etc.)

  The afflicted system has a CD/DVD drive work?

  If the system works, what do you think might have changed since the last time it did not work properly?

  Let me start with this: (never start with KB307545)

  If you have no XP bootable media (or aren't sure you have) create a bootable XP Recovery CD of Console and do not forget.

  This is not the same as recovery disks that might have come with the acquisition of the system store.

  You can make a bootable Recovery Console CD by downloading an ISO file and burn it to a CD.

  The ISO bootable image file you need to download is called:

  xp_rec_con. ISO

  Download the ISO from here:

  http://www.mediafire.com/?ueyyzfymmig

  Use a new CD and this simple and free program to burn your ISO file and create your bootable CD:

  http://www.ImgBurn.com/

  Here are some instructions for ImgBurn:

  http://Forum.ImgBurn.com/index.php?showtopic=61

  It would be a good idea to test your bootable CD on a computer running.

  You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

  When you start on the CD, follow the instructions:

  Press any key to boot from CD...

  Installing Windows... going to pronounce.

  Press 'R' to enter the Recovery Console.

  Select the installation that you want to access (usually 1: C:\WINDOWS)

  You may be asked to enter the password (usually empty).

  You should be in the folder C:\WINDOWS.  It's the same as the

  C:\Windows folder that you see in Solution Explorer.

  The Recovery Console allows base as file commands: copy, rename, replace, delete, chkdsk, fixboot, fixmbr, cd, etc.

  For a list of the commands in the Recovery Console, type help at the prompt of commands or read on here XP Recovery Console:

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/recovery_console_cmds.mspx?mfr=true

  A good idea before you start things must first verify the integrity of your file system by using the chkdsk command.

  In the command prompt window, run the chkdsk command on the drive where Windows is installed to try to fix any problems on the afflicted player.

  Running chkdsk is fine, even if he finds no problem.  It won't hurt anything to run it.

  Assuming your boot drive is C, run the following command:

  CHKDSK C: /r

  Let chkdsk finish to correct the problems, he could find.

  It may take a long time for chkdsk complete or they seem to be "stuck".  Be patient.  If the HARD drive led blinks always, chkdsk is something.  Keep an eye on the amount of the percentage to be sure that it is still making progress.  It may even seem to go back sometime.

  You must run chkdsk/r again until it finds no error to correct.

  Remove the CD, and then type "exit" to exit the RC and restart the computer.

  You have not to set the BIOS to boot the disk HARD since the CD won't be.

• Computer in safemode, blocked: "multi (0) disk (0) partition (1) \WINDOWS\system32\config\system"

  Original title: laptop won't start Windows XP. Shows only a black screen.

  I work on a laptop Gateway MX 3416 running Windows XP Media Center Edition.

  When I turn on the laptop, I see the gateway logo, then white text that says press F11 for recovery of the system, but it goes to a black screen. Pressing on F8 does nothing and if you press the power button, the laptop shut down immediately.
  After you run the Bootcfg command in the Console of a Windows XP disk recovery, I managed to get the ability to run safe mode.
  When I try to run safe mode, it gets stuck at the "multi (0) disk (0) partition (1) \WINDOWS\system32\config\system"
  I have already run chkdsk from the recovery console and it did not show anything.
  I am running out of ideas and any help would be greatly appreciated.
  Hi GreanKube,
   
  Follow the steps in this article to resolve this problem:
  How do I recover from a corrupted registry that prevents Windows XP startup

  
  Warning Do not use the procedure that is described in this article if your computer has an OEM operating system. The hive system on OEM installations creates passwords and user accounts that did not exist previously. If you use the procedure that is described in this article, you may not be able to log in the recovery console to restore the original registry hives.

• \windows\system32\config\system... Missing or corrupt - need help!

  It shows "\windows\system32\config\system...missing or damaged" when I start the laptop. "

  He said that to use the windows recovery console, but my laptop is 10 ", so it does not come with a CD-ROM.

  then I tried to use windows PE (preinstallation environment) system startup via USB driver enter to solve the problem, but when it's loading system, after a few seconds it stop loading. so, I can not in windows PE.    don't know why, that might happen.

  someone knows how to fix this?

  Please help me with this.

  I would never start with KB307545 for this problem, have never used KB307545 to resolve this issue and will never suggest KB307545 to solve this problem.  It's really bad advice.

  KB307545 is the first thing to come into the Bing search engine for the error, but that doesn't make it the right thing to do.

  The problem likely is the file system is corrupt and XP just can not find the file to load.

  The question was preceded by a loss of power, aborted reboot or abnormal termination? (this includes pulling and buttons power)

  These can cause corruption in the file system that must be fixed before you do anything
  on the other.

  If none of these events occurred (or even if they have not taken place), you must verify the integrity of your file system before anything else (especially "try" things).

  There is zero logic to start try to copy files to a hard drive that has a corrupted file system, so this must be first using the XP chkdsk program and run chkdsk on your hard drives may solve your problem completely.

  You don't need a Windows XP disk to run chkdsk/r either (or implement KB307545), but you have to start on something.

  Do you your system of unspecified and model do not have a CD/DVD drive, or you do not have a Windows installation CD or both?

  You have a working CD/DVD drive or not?

  Your system is able to boot from a USB device?

  If your mini system has no CD-ROM drive (many minis don't) and even if you had a Windows CD, it would be of no use, you reference to KB307545 is therefore still less logical.

  @Imran: technician of technical support:

  Have you ever actually fixed this problem before?

  You have ideas that are possible?

  Why don't you take your system to work, get the XP running and then pull the plug on this subject.  Repeat this about 5 - 10 times and then you will be recreated the problem and you can actually see.

  Then, don't use is not a Windows XP installation CD, fix the system afflicted and then offer this solution as an answer instead of the first Microsoft KB article that appears in a search engine Bing.

• Impossibile to "start Windows because the following file is missing or damaged. Windows system32 config system

  1. Impossibile to "start Windows because the following file is missing or damaged. Windows system32 config system

  The question was preceded by a loss of power, aborted reboot or abnormal termination? (This includes pulling and buttons power).

  These can cause corruption in the file system that must be fixed before you do anything else.

  If none of these events occurred (or even if they have not taken place), you must verify the integrity of your file system before anything else (especially "try" things).

  There is zero logic to start try to copy files to a hard drive with a corrupted file system so corruption of file system must be fixed first using the XP chkdsk program and run chkdsk can solve your problem completely.

  Use the XP Recovery Console to check the file system on your HARD drive and fix the problems and then try to start your system - this may be all you need to do.  Or, you are welcome to just start trying things that might work.

  Start the Recovery Console Windows using an XP bootable installation CD, or create a bootable CD from the Console of the Recovery XP (no XP media required).

  A CD of XP Recovery Console is not the same as the recovery disks that may have come to a store to purchase the system.

  If you have any bootable CD to run the XP Recovery Console or that you are not sure what type of bootable CD you have, can create a bootable XP Recovery CD of Console and don't forget (no support for XP not necessary).

  If you need instructions to create a bootable XP Recovery CD of Console, we can predict that too (just ask).

  After booting into the Recovery Console, you should be in this folder:

  C:\WINDOWS

  For each of your hard disk partitions, you must then run:

  Chkdsk /r

  For example, at the Recovery Console prompt, enter:

  CHKDSK c: /r

  Let chkdsk finish to correct the problems, he could find.  It may take a long time to complete or seem to be 'glued '.  Be patient.  If the HARD drive light flashes, it's something.  Keep an eye on the amount of the percentage to be sure that it is still making progress.  It may even seem to go back sometime.

  The chkdsk/r must be completed without error, you may need to run several times until it does.

  Remove the CD, and then type "exit" to exit the Recovery Console and restart the computer and the report with your progress.

• Windows\System32\Config\System is corrupted or missing error

  system32 error
  my ex is to get the windows\system32\config\system missing or damaged error. Unfortunately, she only has more his original cd, can I download a boot disk or recovery disk or whatever it is? The computer won't past this screen. As a side note, I have a student XP Pro installation disc, but it will not even read that.

  Maybe someday the dialog box 'ask a question' forums XP will ask these questions automatically when a new thread is started so I don't have to ask every time.  It might even be possible to solve a problem in a single response when enough information is provided.

  Please provide additional information on your system:

  What is your system brand and model?

  What is your Version of XP and the Service Pack?

  Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..

  The question was preceded by a loss of power, aborted reboot or abnormal termination?  (this includes the plug pulling, buttons power, remove the battery, etc.)

  The afflicted system has a CD/DVD drive work?

  If the system works, what do you think might have changed since the last time it did not work properly?

  The question was preceded by a loss of power, aborted reboot or abnormal termination? (This includes the plug pulling, buttons power and removing the battery).

  These can cause corruption in the file system that must be fixed before you do anything else.

  If none of these events occurred (or even if they have not taken place), you must verify the integrity of your file system before anything else (especially "try" things).

  There is zero logic to begin to try to begin to try to modify or copy files to a hard drive that has a corrupted file system, so this must first be fixed using the XP chkdsk program and run chkdsk on your hard drives may solve your problem completely.

  Use the XP Recovery Console to check the file system on your HARD drive and fix the problems and then try to start your system - this may be all you need to do.  Or, you are welcome to just start trying things that might work.

  Boot into the Recovery Console Windows using an XP bootable installation CD.

  If you have no XP bootable media (or aren't sure you have) create a bootable XP Recovery CD of Console and do not forget.

  This is not the same as recovery disks that may have come to a store to purchase the system.

  You can make a bootable Recovery Console CD by downloading an ISO file and burn it to a CD.

  The ISO bootable image file you need to download is called:

  xp_rec_con. ISO

  Download the ISO from here:

  http://www.mediafire.com/?ueyyzfymmig

  Use a new CD and this simple and free program to burn your ISO file and create your bootable CD:

  http://www.ImgBurn.com/

  Here are some instructions for ImgBurn:

  http://Forum.ImgBurn.com/index.php?showtopic=61

  It would be a good idea to test your bootable CD on a computer running.

  You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

  When you start on the CD, follow the instructions:

  Press any key to boot from CD...

  Installing Windows... going to pronounce.

  Press 'R' to enter the Recovery Console.

  Select the installation that you want to access (usually 1: C:\WINDOWS)

  You may be asked to enter the password (usually empty).

  You should be in the folder C:\WINDOWS.  It's the same as the

  C:\Windows folder that you see in Solution Explorer.

  The Recovery Console allows base as file commands: copy, rename, replace, delete, chkdsk, fixboot, fixmbr, cd, etc.

  For a list of the commands in the Recovery Console, type help at the prompt of commands or read on here XP Recovery Console:

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/recovery_console_cmds.mspx?mfr=true

  A good idea before you start things must first verify the integrity of your file system by using the chkdsk command.

  In the command prompt window, run the chkdsk command on the drive where Windows is installed to try to fix any problems on the afflicted player.

  Running chkdsk is fine, even if he finds no problem.  It won't hurt anything to run it.

  Assuming your boot drive is C, run the following command:

  CHKDSK C: /r

  Let chkdsk finish to correct the problems, he could find.

  It may take a long time for chkdsk complete or they seem to be "stuck".  Be patient.  If the HARD drive led blinks always, chkdsk is something.  Keep an eye on the amount of the percentage to be sure that it is still making progress.  It may even seem to go back sometime.

  You must run chkdsk/r again until it finds no error to correct.

  Remove the CD, and then type "exit" to exit the RC and restart the computer.

  You have not to set the BIOS to boot the disk HARD since the CD won't be.

• Windows xp sp3 corrupted/missing windows system32\config\system

  Due to the plant after installing sp3, I got the message: "windows has not start because the following file is mising or corrupted \windows\system32\config\system."

  Then, I preformed another destructive restore. again, had the same message. Instead of making another destructive recovery, I did a repair.

  Everything was fine, installed all updates etc. Until I installed sp3. I woke up, started the pc and ONCE again, got the same message.

  I have a HP a375c running windows xp (with sp3).

  I can occasionally, to restart, and it will load. But it's unstable. I can't trust to continue trying to restart and then ultimately won't be able to end.

  I also received a message: c:\i386\dist\system32\dll.dll can not be recovered.

  The system is unstable. ANY help would be greatly appreciated. Apparently, will not be supported sp2 for my system more, Windows XP 32-bit Home Edition.

  How can I fix? It seems to me, that's a problem with sp3.

  I'm tired of performing, destructive and non-destructive, System Restore, etc. Over and over again. Only that it is down. As you know, doing the recovery takes ALL DAY, having to get all updates.

  Help, please...

  I use the original recovery cd of HP.

  HP Pavilion A375c Windows XP Home Edition 32-bit

  I changed the drive (long ago) of chkdsk, found no problems.

  I added Ram.

  This message refers to the hive of the registry.  Is to say that the registry is missing or corrupted, in which case it cannot be loaded.  the question is what is the cause of registry errors.

  It would again be a failing hard drive? Perhaps, your poor quality in windows software installation.  Perhaps, you use your system very strongly but not to keep optimized/set up as regular check records and defragments.

  the disk check reconcile file in the file system to the master file table.  because as long as the files are indexed on the mft, then they won't show up missing.  and Defrag makes sure that the files on the disc are not highly fragmented, as your registry hive.   If one of the many fragments that make a single file corrupted, then all the fragments that becomes unusable.

  so, my suggestion is that if you do not have access to a cd to boot xp in order to launch the recovery console and access the drive prompt, then try to do a boot-able with utilities on that cd so that you don't have to use your recovery cd.

  I did not one of them provided by this site, but I've not heard bad things on this subject: http://www.ubcd4win.org/index.htm

  then when you finally get to the disk prompt run command >:

  Chkdsk /r

  the slash r will mark bad sectors on your hard disk and make windows to ignore the wrong places when writing data to the hard drive in the future.

  also, since you seem to escape that you get this type of error several times, then my suggestion is to make a backup of your registry hive.  This way you can restore via a boot-able floppy.

  If the disk check / r fails to correct the problem with the registry, then you can replace it with a base in a safe place inside the windows folder.

  Keep us updated on your condition.