International access without carrier
Can I buy an iPhone in the US that is unlocked and can bring to my home country and use it with my local sim provided by my local operator
It depends largely if the phone you buy in the United States is compatible with the carrier that you want to use.
There are various models of iPhone sold in different parts of the world that support the different bands of LTE, etc..
You can find more information here: http://www.apple.com/iphone/LTE/
Tags: iPhone
Similar Questions
-
My iPhone to send international sms without inform me please solve it
Dear Apple support,Please, I lost my money in my iphone, cause my iphone to send international sms without informing me.
Please would solve the problem A.S.A.P.
Best regards
Nabil Al Badani
TZ جهاز الـ الخاص بي iPhone
It is not Apple to inform you of your phone, send international SMS. Your network provider is one that informs you of the international charges. It is usually noted in the terms of your contract/agreement with your wireless operator. Know who your carrier is and then watch the General Conditions and communicate with them. Unfortunately, Apple, can help you with charges to send SMS International.
-
Internet &; internal access to view
Sure someone must have met before, but I've been scratching my head about it.
We are willing to allow the view users connect via a security server via Internet IP and also by the Broker for the connections.
But when I configured security server, IE HTTP (S) Secure Tunnel, PCoIP Secure Gateway & Blast Secure Gateway, filled on the Broker for connections when we try and access it via the internal IP address, I get an error "view server connection authentication failed. Unable to connect via the server proxy 'x.x.x.x' to the server https://x.x.x.x:443. »
Is it possible to get customer reviews to use only the internal IP without trying to connect to the external IP address?
Soon, if anyone can help!
A.
To support internal and external access, it is preferable to use a connection to the server for each - one for internal, external. The second login server is a replica of the first. Only has a security server.
You can assign up to just use a single login with correct routing server, etc., but it is more difficult to implement and is less effective for internal users.
This doc http://communities.vmware.com/docs/DOC-14974 through all this in quite some detail.
Mark
-
VPN - cannot subnets behind 2nd router internal access. Help.
Hi guys,.
Looking for a little help after a day of frustration. I'm really new to this and student so I know I'm doing something stupid. In any case, I bought an ASA 5505 and placed it between my cable Modem and router Cisco 3745. The external interface on the ASA is dhcp, the inside interface is 192.168.100.1. The external interface of the 3745 is 192.168.100.2 and inside is 192.168.1.1. The VPN pool is 192.168.200.10 - 192.168.200.10.
These are the problems...
1. when I set up a VPN to ASA session, I can ping and access resources dierectly connected to interfaces of the ASA and the 192.168.100.0 internal ASA network. However, I can't access any resource behind the 3745. I can't even ping 192.168.1.1.
2. Although I believe I sent split tunnel, I can't turn to the internet when connected to the VPN.
Here's my network and my config ASA topology and router config...
ASA...ASA Version 8.2 (5)
!
poog-fw1 hostname
Poog domain name
activate the password * encrypted
encrypted
names of
name 192.168.100.2 RouterWAN
internal name 192.168.100.0
name 192.168.200.0 VPN
!
interface Ethernet0/0
switchport access vlan 2
!
interface Ethernet0/1
!
interface Ethernet0/2
!
interface Ethernet0/3
!
interface Ethernet0/4
!
interface Ethernet0/5
!
interface Ethernet0/6
!
interface Ethernet0/7
!
interface Vlan1
nameif inside
security-level 100
IP 192.168.100.1 address 255.255.255.0
!
interface Vlan2
nameif outside
security-level 0
IP address dhcp setroute
!
boot system Disk0: / asa825 - k8.bin
passive FTP mode
DNS lookup field inside
DNS domain-lookup outside
DNS server-group DefaultDNS
Server name 167.206.245.129
Server name 167.206.245.130
Poog domain name
permit same-security-traffic intra-interface
object-group, VPN network
the RouterWAN object-group network
object-group network RouterWAN-01
object-group network RouterWAN-02
object-group network RouterWAN-03
object-group network RouterWAN-04
object-group network RouterWAN-05
the obj_any object-group network
network of subject-group obj_any-01
object-group network obj - 0.0.0.0
object-group network iphone
object-group Protocol TCPUDP
object-protocol udp
object-tcp protocol
outside_access_in list extended access permitted tcp VPN 255.255.255.0 everything
Comment from outside_access_in-Telnet access on the router list
outside_access_in list extended access permit tcp any interface outside eq telnet
Comment from outside_access_in-access IP cameras list
outside_access_in list extended access allowed object-group TCPUDP any interface apart from 1021 1022 range
outside_access_in list extended access permit tcp any interface outside eq www
Comment from outside_access_in-list of FTP access to NAS
outside_access_in list extended access permit tcp any interface outside eq ftp
Comment from outside_access_in-VNC server WX access list
outside_access_in list extended access permit tcp any interface outside eq 5900
outside_access_in list extended access permit tcp any interface outside eq https
Comment from outside_access_in-Telnet access on the router list
Comment from outside_access_in-access IP cameras list
Comment from outside_access_in-list of FTP access to NAS
Comment from outside_access_in-VNC server WX access list
AnyConnect_Client_Local_Print list extended access permit tcp any any eq lpd
Note AnyConnect_Client_Local_Print of access list IPP: Internet Printing Protocol
AnyConnect_Client_Local_Print list extended access permit tcp any any eq 631
print the access-list AnyConnect_Client_Local_Print Note Windows port
AnyConnect_Client_Local_Print list extended access permit tcp any any eq 9100
access-list AnyConnect_Client_Local_Print mDNS Note: multicast DNS protocol
AnyConnect_Client_Local_Print list extended access permit udp any host 224.0.0.251 eq 5353
AnyConnect_Client_Local_Print of access list LLMNR Note: link Local Multicast Name Resolution protocol
AnyConnect_Client_Local_Print list extended access permit udp any host 224.0.0.252 eq 5355
Note access list TCP/NetBIOS protocol AnyConnect_Client_Local_Print
AnyConnect_Client_Local_Print list extended access permit tcp any any eq 137
AnyConnect_Client_Local_Print list extended access udp allowed any any eq netbios-ns
AnyConnect_Client_Local_Print deny ip extended access list a whole
Note AnyConnect_Client_Local_Print of access list IPP: Internet Printing Protocol
print the access-list AnyConnect_Client_Local_Print Note Windows port
access-list AnyConnect_Client_Local_Print mDNS Note: multicast DNS protocol
AnyConnect_Client_Local_Print of access list LLMNR Note: link Local Multicast Name Resolution protocol
Note access list TCP/NetBIOS protocol AnyConnect_Client_Local_Print
inside_nat0_outbound to access extended list internal ip 255.255.255.0 allow VPN 255.255.255.0
standard access-list internal split tunnel permit 255.255.255.0
host of standard splitting allowed access list 192.168.1.0 tunnel
pager lines 24
Enable logging
asdm of logging of information
Within 1500 MTU
Outside 1500 MTU
local pool VPNPOOL 192.168.200.10 - 192.168.200.20 255.255.255.0 IP mask
IP verify reverse path to the outside interface
ICMP unreachable rate-limit 1 burst-size 1
ASDM image disk0: / asdm - 647.bin
don't allow no asdm history
ARP timeout 14400
NAT-control
Overall 101 (external) interface
NAT (inside) 0-list of access inside_nat0_outbound
NAT (inside) 101 0.0.0.0 0.0.0.0
public static tcp (indoor, outdoor) interface telnet RouterWAN telnet netmask 255.255.255.255
static (inside, inside) tcp 5900 5900 RouterWAN netmask 255.255.255.255 interface
public static tcp (indoor, outdoor) interface ftp RouterWAN ftp netmask 255.255.255.255
1021 RouterWAN 1021 netmask 255.255.255.255 static interface tcp (indoor, outdoor)
static (inside, inside) tcp 1022 1022 RouterWAN netmask 255.255.255.255 interface
Access-group outside_access_in in interface outside
!
router RIP
internal network
default information are created
version 2
No Auto-resume
!
Route inside 192.168.1.0 255.255.255.0 RouterWAN 1
Route inside VPN 255.255.255.0 192.168.100.1 1
Timeout xlate 03:00
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
Floating conn timeout 0:00:00
dynamic-access-policy-registration DfltAccessPolicy
Enable http server
http internal 255.255.255.0 inside
http VPN 255.255.255.0 inside
No snmp server location
No snmp Server contact
Server enable SNMP traps snmp authentication linkup, linkdown cold start
life crypto ipsec security association seconds 28800
Crypto ipsec kilobytes of life - safety 4608000 association
Telnet internal 255.255.255.0 inside
Telnet timeout 5
SSH timeout 5
Console timeout 0
dhcpd outside auto_config
!
dhcpd address RouterWAN-RouterWAN inside
dhcpd auto_config outside interface inside
dhcpd allow inside
!
a basic threat threat detection
Statistics-list of access threat detection
no statistical threat detection tcp-interception
WebVPN
allow outside
SVC disk0:/anyconnect-macosx-i386-2.4.1012-k9.pkg 1 image
enable SVC
tunnel-group-list activate
attributes of Group Policy DfltGrpPolicy
value of server DNS 167.206.245.129
Protocol-tunnel-VPN IPSec l2tp ipsec svc webvpn
Split-tunnel-network-list value split tunnel
internal Clientless group strategy
attributes without Group Policy client
VPN-tunnel-Protocol webvpn
WebVPN
the value of the URL - list VPN_Book_Marks
internal AnyConnect group strategy
attributes AnyConnect-group policy
Welcome To My Network Banner value
value of server DNS 167.206.245.129
VPN-tunnel-Protocol svc webvpn
Split-tunnel-policy tunnelspecified
Split-tunnel-network-list no
Poog value by default-field
WebVPN
the value of the URL - list VPN_Book_Marks
SVC Dungeon-Installer installed
SVC request no svc default
username ogonzalez encrypted password privilege 0 0VrbklOhGRHipw79
username ogonzalez attributes
Clientless VPN-group-policy
username ymcpO334smdskkpl encrypted password privilege 0 jgonzalez
jgonzalez username attributes
AnyConnect VPN-group-policy
type tunnel-group RAVPN remote access
attributes global-tunnel-group RAVPN
address VPNPOOL pool
tunnel-group RAVPN webvpn-attributes
enable RAVPN group-alias
allow group-url https://69.121.142.156/RAVPN
tunnel-group AnyConnect type remote access
tunnel-group AnyConnect General attributes
address VPNPOOL pool
strategy-group-by default AnyConnect
tunnel-group AnyConnect webvpn-attributes
enable AnyConnect group-alias
allow group-url https://69.121.142.156/AnyConnect
tunnel-group type Clientless Remote access
tunnel-group Clientless General attributes
Clientless by default-group-policy
!
class-map inspection_default
match default-inspection-traffic
!
!
type of policy-card inspect dns preset_dns_map
parameters
maximum message length automatic of customer
message-length maximum 512
Policy-map global_policy
class inspection_default
inspect the preset_dns_map dns
inspect the ftp
inspect h323 h225
inspect the h323 ras
inspect the rsh
inspect the rtsp
inspect esmtp
inspect sqlnet
inspect the skinny
inspect sunrpc
inspect xdmcp
inspect the sip
inspect the netbios
inspect the tftp
Review the ip options
!
global service-policy global_policy
context of prompt hostname
no remote anonymous reporting call
call-home
Profile of CiscoTAC-1
no active account
http https://tools.cisco.com/its/service/oddce/services/DDCEService destination address
email address of destination [email protected] / * /
destination-mode http transport
Subscribe to alert-group diagnosis
Subscribe to alert-group environment
Subscribe to alert-group monthly periodic inventory
monthly periodicals to subscribe to alert-group configuration
daily periodic subscribe to alert-group telemetry
Cryptochecksum:7d91e2ad8d7a86c40860fa8a1b117271
: end
Router...
Current configuration: 1922 bytes
!
version 12.3
horodateurs service debug uptime
Log service timestamps uptime
no password encryption service
!
hostname poog_rtr1
!
boot-start-marker
boot-end-marker
!
no set record in buffered memory
no console logging
no logging monitor
enable secret 5 *.
!
No aaa new-model
IP subnet zero
!
!
IP cef
no ip domain search
DHCP excluded-address IP 192.168.1.1 192.168.1.150
!
IP dhcp DHCP1 pool
import all
network 192.168.1.0 255.255.255.0
default router 192.168.1.1
DNS-server 167.206.245.129 167.206.245.130
!
!
!
!
!
!
!
!
!
!
!
!
username * password privilege 15 0 *.
!
!
!
!
interface Loopback0
IP 1.1.1.1 255.255.255.255
!
interface FastEthernet0/0
LAN description
IP 192.168.1.1 255.255.255.0
IP nat inside
automatic duplex
automatic speed
!
interface FastEthernet0/1
WAN description
DHCP IP address
NAT outside IP
automatic duplex
automatic speed
!
router RIP
version 2
network 192.168.1.0
network 192.168.100.0
network 192.168.200.0
No Auto-resume
!
IP nat inside source list 1 interface FastEthernet0/1 overload
IP nat inside source static tcp 192.168.1.100 80 interface FastEthernet0/1 80
IP nat inside source static tcp 192.168.1.13 5900 interface FastEthernet0/1 5900
IP nat inside source static tcp 192.168.1.12 1022 interface FastEthernet0/1 1022
IP nat inside source static tcp 192.168.1.11 1021 interface FastEthernet0/1 1021
IP nat inside source static tcp 192.168.1.100 21 interface FastEthernet0/1 21
IP nat inside source static tcp 192.168.1.1 23 interface FastEthernet0/1 23
IP http server
local IP http authentication
IP classless
IP route 192.168.200.0 255.255.255.0 FastEthernet0/1
!
!
Remark SDM_ACL category of access list 1 = 16
access-list 1 permit one
not run cdp
!
!
!
!
!
!
!
Dial-peer cor custom
!
!
!
entry door
!
Banner motd ^ C
UNAUTHORIZED ACCESS IS STRICTLY PROHIBITED! *****^C
!
Line con 0
line to 0
line vty 0 4
local connection
!
end
"192.168.100.0---> 192.168.1.0 I DO NOT get ping responses."
Please add "inspect icmp" in politics of inspection_default class as shown below.
Policy-map global_policy
class inspection_default
inspect the preset_dns_map dns
inspect the ftp
inspect h323 h225
inspect the h323 ras
inspect the rsh
inspect the rtsp
inspect esmtp
inspect sqlnet
inspect the skinny
inspect sunrpc
inspect xdmcp
inspect the sip
inspect the netbios
inspect the tftp
Review the ip options
inspect the icmp
I hope this helps.
Evaluate the useful ticket.
Thank you
-
Internal access to the servers of the network security
Hi all
I'm trying to set up a html to Internet to our internal virtual desktop computer connection.
From our internal network, all network traffic through the login server located on the internal network, no problem.
On the Internet, the connection is established with the Security Server, but when we try to access our desktop from view, security server tries to join the bureau with his private address that is not reachable from the demilitarized zone.
Blast Secure Gateway seems to be configured correctly, and we try to avoid the NIC pluging 2nd on security for access to our private network server.
Any idea about this problem?
I read a lot of literature on this type of configuration, and it seems, that it should be possible without a second network adapter is not recommended.
Thanks a lot for your help.
Kind regards
Sylvain
To establish the Blast session via the Security Server, the SS will attempt to connect to the machine via TCP 22443 vDesktop, then Yes, you need to create a firewall rule that allows a NIC SS create a TCP 22443 with any IP virtual desktop connection.
This is essentially the reason why people add 2 interfaces to SS - a Public-facing DMZ network (can connect on the internet) and another private-DMZ in front of a network (not exposed to the Internet, only life SS here).
In the case of a single adapter, you must allow the Public DMZ network connections on your virtual desktop, which is not desirable in most cases.
Architecture 2nic 'Typical' or town:
Mighty Internet | Public-DMZ | Private-DMZ | Internal network
Customer > 443, 8443 | SSPubNic | SSPrivNIC > 22443 | Any virtual office
+ firewall rules that allow the communication of the SS (above SSPrivNic probably deal) with CS
Direct connections to the internal network from the Internet or Public-DMZ net are not allowed.
In case of a single NETWORK adapter for your SS:
Mighty Internet | DMZ | Internal network
Customer > 443, 8443 | SSPubNic > 22443 | Any virtual office
+ firewall rules that allow the communication of the SS with CS
In case of a single NETWORK adapter for your SS, you're allowing direct connections to a wide enough area of your network private directly from the network to the DMZ, which is exposed to the Internet and that should be attacked.
It should work. If it is acceptable from the point of view of security is something different and more likely to your security administrator.
Hope this helps and I hope that I forgot something important...
-
How can I buy an iPhone without carrier 7
I'm going to buy a new iPhone 7 online, but I don't have a phone between these four carriers number, if I want to buy a Verizon version or the spirit, what do I do?
I had this problem last year too. Technically the T-Mobile version works on all carriers, but the voice is not LTE I believe with Verizon. I found myself waiting for the version without SIM card out approximately 6 weeks after the launch. It works will be all carriers. I guess the same thing will happen with the 7.
-
I am interested in the Apple Watch for fitness, but to use the phone when I run it without having to carry my iPhone 6 s, is it possible?
You can, but the Fitness app works better if you have the iPhone on your person.
-
Need to give rights of folder only read access without copyright
I installed windows server 2008 in my data center. We created a folder on the local drive and shared. In the same folder we provide access to records to access read-only without copyright. Now I got permission to play in the same folder, but the user able to adapt file from within the same folder.
Hello
Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the Technet Forums. You can follow the link to your question:
http://social.technet.Microsoft.com/forums/en-us/categories/ -
E3000 - guest access without password
Hello
I just installed a new E3000 wireless router and it works fine.
But I would like to give my guests access Internet without having to enter a password.
I know how to change the - password of comments, but it requires a minimum 4 digits password.
Is there a way to remove it?
Thank you
N ° there is no way that you can remove. The least we can do is to simplify the password such as 1234 or something.
-
Access Manager will not allow access without password
Access Manager does not allow me to access anything without having to type the password first. He started to do this without my permission.
How can I stop the stop?
Access Manager does not allow me to access anything without having to type the password first. He started to do this without my permission.
How can I stop the stop?
The administrator has put a password on the Internet.
You can not surf without your administrator password. Talk to this person. No one here can help you.t-4-2
-
Internal access to the site at the remote location via wifi
We have an internal site to A location and we have a 2 layer hose B location. When you use the ethernet connection, site B can access the site. What we want to do, is allow them to access via wifi with the VPN site to site (who currently works) hosted by of our Sonicwall.
How this is a problem is our network is separate; wifi at site B is on the DMZ. We added access rules to allow the DMZ-> VPN traffic on the site, which did not work; No ping, no traffic, no communication. We've also added policy NAT, same story.
My theory on why it does not work is because the VPN tunnel to one SW to another is related to X 0, but even after enabling access, it's the same result.
Any help would be appreciated. Thank you all!
Hello
Is DMZ subnet to site B added under 'Local networks' VPN B Site and under 'Remote Networks' policy in Site A VPN policy? If you have then SonicWALL auto-créera access rules to allow WiFi traffic. Basically, you need to add the DMZ subnet in site B the VPN policy.
You can also see the article: https://support.software.dell.com/kb/sw7725
-
BlackBerry Smartphones trying to find wifi blackberry access WITHOUT
I'm trying to finf a blackberry with a QWERTY keyboard phone ISN'T just a wi - fi access. I don't really know much about cell phones, so if anyone out there has any suggestions as to what models I should, please speak in terms laymans. I have a child in college who asked a QWERTY texting phone but doesn't have wi - fi connectivity. This who should I look for? Thanks a lot for your hel
There is no device without wifi band. All devices BB10 (Q10, Classic, passport, etc.) have the Parental control and while you can not turn off wifi completely, you can disable the browser, camera, BBM, Twitter, Facebook, Upload on Youtube, configuration of the email account, location information, buy BBWorld, install Applications and content. You can also disable the phone calls and text messages from people who are not contacts on the device.
-
MMIC access without IP address configuration. and without having to reboot.
Hi all.
Am Yoong.
I have question for access MMIC.
In my customer's site, there is a UCSC-M240 server.
I need to access the CIMC, there is no ip to the MMIC server configuration (maybe we by default)
I know I should confugration IP of CIMC for UCS restart server, but it may not.
Because of the desires of the customers.
How can I access MMIC and get the log file of technical support without setting address IP MMIC?
Is it possible to configure the IP address on the server?
Kind regards.
Yoong huh.
Yoong,
If the configuration by default MMIC has DHCP then probably he waits for the server switch DHCP to assign an IP address to it.
Please go ahead.
Kind regards
Saurabh
-
Internet access without split tunneling VPN PIX
I have a PIX 515E with code 6.31. I installed a VPN to allow access to the internal network from the Internet using the Cisco VPN client. It does not work properly. We have some sellers who demand that we come from our Internet IP range to allow us access to their database on the Internet. This works very well for our internal users, but I will allow users VPN for this also.
Is there a way to allow the user from the VPN client to use the Internet for business access to the internet instead of use the split tunneling to access the internet through their own connection? I would like users to vpn to be NAT would have réécrirait Internet and seeming come from our pool of Internet addresses. What I found references by using the split tunneling, but this won't work for me. Am I stuck getting a VPN concentrator to achieve?
Thank you
Josh
The PIX cannot route a package back on the same interface, he entered the, which includes a customer entering the interface external and routed VPN package back on the same interface.
A router or a VPN concentrator would be able to do this, but not a PIX, sorry.
-
URL for access without client on SAA
Hello
I have an ASA with anyconnect configured profiles.
In one of these profiles, I want to activate VPN without client.
When I go to https://[asa address] get the instalation Anyconnect page.
How to make in the portal for client access?
Based on the above information, you can't clientless SSL VPN that you have active AnyConnect Essentials.
I saw that you have a license 2 (AnyConnect Essentials and AnyConnect Premium (10)), however, you can only activate one or the other, not both at the same time.
based on your webvpn configuration:
WebVPN
allow outside
AnyConnect essentials
You anyconnect essentials enabled, so you cannot have the premium activated anyconnect.
If you want to test the premium for clientless ssl vpn license, you will need to temporarily disable the anyconnect essentials.
to disable:
WebVPN
No anyconnect essentials
Hope that clears up the confusion.
Maybe you are looking for
-
Hi, until very recently (was able to look at things such as BBC iplayer and arkvid links to anime and other programs of television, but after September 18 I was unable of videos, youtube content works but most of the others do not seem to work for so
-
Satellite - black screen and can't restart with the recovery disk
I have a black screen and can not restart with the restore disc but it seems to be. I find this odd, I can't ask Toshiba direct on my problem, but I have to wait for one nature in the heart of my problem or give me a helping hand
-
Features VI DAQmx differently in LabVIEW that it does in TestStand
I particularly have a VI that generates a square wave signal to control the movement of a motor. When I run the VI in LabVIEW, after a certain time, it stops (a timer is also included in VI). When this same VI is executed as an Action (or boundary Te
-
Hello We have two PageWide Pro 577 products multifunctional. It seems that we can only save 15 addresses in the address book. I'm taking crazy pills? What gives HP which is ridiculous. If I delete an address I can add a new. If I delete an address an
-
The mouse works intermittently
Original title: Why my mouse clings? Sometimes the mouse pointer jumps and sticks