Where say them thank YOU

Similar Questions

• Is it possible to remove hyphens at the end of a line separating the parts of a Word? Thank you

  Hello

  I was wondering, Indesign automatically add hyphens at the end of a line to reach a part of the word with the next part (on the next line). Is it possible to get rid of it in my entire document so that indesign automatically updates the word on the next line instead of separating them by a dash? I was passing by it manually and fix but it takes many hours.

  Let me know if it is not clear what I'm saying

  Thank you very much

  LegitNZ wrote:

  I was passing by it manually and fix, but it takes a lot of hours

  Ouch!  What you need to do is turn "caesura".  Select all of your text and drag it in the control panel command like this:

  

  You can also disable it before starting in the paragraph Panel, or turning it took off without documentation open to default.

• I had to reload XP Pro with sp3. Realtek 97 a/c, says that I need bus controller drivers. Where can I find what I need? Thank you

  I had to reload XP Pro with sp3. Realtek 97 a/c, says that I need bus controller drivers. Where can I find what I need?  Thank you

  Best places would be the site Web of the manufacturer of your computer or your motherboard manufacturer.

• Please help, im trying to add a text field in a document of docusign where I can type information to the recipient before sending them, how should I do this? Thank you.

  How you fill in the information prior to sending the doc on signature here? Help, please.

  Thank you.

  

  Hello Benschiftan,

  In the preview page, you can drag and drop the text field and together can the role as register and once you click on send on the right side, you will be asked to enter the details until the document is sent to the signatory.

  Here is the link for reference:

  https://helpx.Adobe.com/document-cloud/help/prefill-role.html

  -Usman

• 2 Ihave rundll to appear on my screen when I start saying error loading I need them to be installed or I can remove them thanks

  2 rundll Ihave to appear on my screen when I start my pc, they declare that they are error loading c\windows\system32\prwleprn.dll. and c\windows\system32------nsiad.dll - (the specified module is not found.)   could you help please because I do not know if I need it or not if I could you tell me how I can install them, but if I don't need them could you tell me how I can remove them thanks

  PML instructions are precise and concise.

  My instructions for this issue are similar but more verbose - perhaps they will help you get your system fixed to the top (just read them first, then apply them).

  A "Cannot find...". ', ' Failed to start..., "Could not load..." ». "Might not work... "" Cannot run ""error loading... ". "or"specific module could not be found"message at startup is usually related to the malware that has been configured to run at startup, but the referenced file has been removed after a malware scan, leaving behind him a startup item or the registry entry pointing to a file that does not exist.
  It might be a removal of malicious software or an application not installed.  The entry may have a curious looking name since it was probably generated at random when the malware was installed. If you search your system for the referenced file, you may not find.
  Windows attempts to load this file but cannot locate because the file has been deleted for most probably during an analysis of the malware. However, an orphaned associate of remainders of startup parameter or registry entry and tells Windows to load the file when you start or connection.
  So you should delete the referenced entry Windows stop trying to load or run the file. It may or may not be included in the registry, but you can find it.  Autoruns (see below) you get the elements no matter where it is.

  If you are comfortable editing the registry, you can find and remove the reference directly from there or remove it using a popular third-party tool called Autoruns.  The problem can always be found in the registry well.

  Before making any changes to your registry by hand or with third-party tools, don't forget to first make a backup of the registry. There is no cancellation or exit without saving the option in regedit.
  Here is a link to a popular registry backup tool:
  http://www.SnapFiles.com/get/ERUNT.html
  You can also use the Autoruns to find the element of start remains little matter where he's hiding.
  
  Autoruns does not install anything on your computer.  It will display all startup locations where the reference may be then you can turn it off or remove it completely.  Here is the download link for Autoruns:
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Run Autoruns.exe and wait that he at the end of the filling of the list of entries.
  When the Autoruns is finished scanning your system, it will say "Ready" in the lower left corner.  Autoruns can be a little intimidating to first if you have never seen it before because it displays a lot of information.  You are really interested only a few sections.
  The problem is usually to start the system or the user startup entries, then click the connection tab and see if the startup item is there.
  Scroll through the list and look for a boot entry associated files in the error message.
  If you can't find on the connection tab, look in any tab.
  You can also click file, search to search for logon, or any tab for all or part of the name of the element.
  Right-click on the offending entry and choose Remove.  If you are not sure what it is, you can simply disable, restart and if the problem is resolved and then remove the offending entry.  If you don't see it in Autoruns, you may edit the registry and remove the item from your startup folder it.  Autoruns shall display the same information however.
  Given that you had or have an infection, followed with this:
  Perform scans for malware, and then fix any problems:
  Download, install, update and do a full scan with these free malware detection programs:
  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
  They can be uninstalled later if you wish.
  Restart your computer and solve the outstanding issues.

• I just upgraded to a new computer running Windows 7 to an old an XP running. I would like to transfer all my favorites, but I don't know where they are and where to go to in the new computer. Thank you.

  I just upgraded to a new computer running Windows 7 to an old an XP running. I want to migrate my old favorites to the new computer, but I don't know where to find them and the places where to migrate.

  I have the old drive from the computer.

  Thank you.

  See https://support.mozilla.com/en-US/kb/Backing%20up%20and%20restoring%20bookmarks

  and

  https://support.Mozilla.com/en-us/KB/backing%20up%20your%20information?s=new+computer & r = 4 & As=s#OS = Win & Browser = FX8

• Hi there is a problem in my iphone5, I can't take pictures on my behind cam it says must be cooled my battery was recently replace how can I fix my camera? Thank you

  IHH there is a problem on my iphone5 I can't take pictures on my behind cam there is the message that appears, he says he needs to cool down, my battery was recently replaced, is there a solution for this problem? Thank you

  Take it back to the place which replaced the battery and ask them to look at.

• My PC says that it can not download dates because virtual memory runs out? Who can help me. Thank you

  If anyone can help to guide me to overcome the lack of virtual memory. Thank you.

  I've never seen this difficulty it work or do something, but you can of course try it (he says it of fixing, but makes no changes for me).  I think this is another of these Fix sound that doesn't fix it.

  I'm not sure that the idea to the other link "get your virtual memory" is a good idea either because it doesn't tell you how to find out how much you have memory, or how much it raise.  Just bumping may be not a good idea.

  Research in Manager tasks will tell you not how your currently running applications use unless you enable the column size virtual memory manager tasks, so that the idea will not a great party serve for you-at least that is how it works on XP system never I've never worked on virtual memory.

  If you look in the event viewer after this message, you are likely to see is something like this:

  Event type: Information
  Event source: Application Popup
  Event category: no
  Event ID: 26
  Description:
  Application popup: Windows - virtual memory Minimum too low: your system is low on virtual memory.
  Windows is increasing the size of your virtual memory paging file. During this process, memory
  for some applications, applications may be refused.

  You already know that well.

  I think it would be best to ask a few questions first, check a few things, see what you have now and then decide what to do:

  Since the Microsoft Answers forum does not have any kind of information system request when a new question is asked, we know absolutely nothing about your system.  Not knowing the basic information a problem prolongs the frustration and the agony of these issues.

  Thank you MS Answers, allowing the resolution of simple problems as frustrating and a lot of time as possible.

  Provide information on your system, the better you can:

  What is your system brand and model?

  What is your Version of XP and the Service Pack?

  Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..

  If the system works, what do you think might have changed since the last time it did not work properly?

  This will minimize back Q & A and eliminate guesswork.

  If you mean that you see a message like this:

  Virtual memory minimum too low: your system is low on virtual memory.  Windows is increasing the size of your virtual memory paging file.

  This means that Windows XP is to let you know that he does his work.  The message is not an error message - this is an informational message.

  If XP thinks that the size of the swap file (usually c:\pagefile.sys) is too small to accommodate your day-to-day transactions, it will adjust the paging file to expand the pagefile and display this message as it does.  It is not necessarily a 'problem', but the message is boring.

  Sometimes, the message indicates someone was tampering with the XP of the paging file settings to try to solve another problem that usually has nothing to do with their paging file and resolve things inefficiently.

  This could mean that the settings have been adjusted for certain values that don't make sense for the configuration of the system.  Unless we know the system better, you can't just pick certain values out of the air and that your system behaves effectively.  You might not see the message again, but this does not mean that the settings are correct.

  This could mean that the settings have never been properly in the first place when you first install of XP and things must be properly configured.

  Sometimes, as your system configuration changes over time and other applications are running and get bigger, you may add additional RAM to your system to accommodate things (or run the number of requests).

  At least that learn you more about managing memory than Windows XP, it is usually best to simply let XP manage the size of your virtual memory paging file.

  To see what your current, make settings right click post work, properties, advanced, performance settings, Advanced tab, virtual memory, and then click the button change.

  Make a note of the current settings in case you need to change their return more later.

  The best setting for the size of swap file is usually going to be:

  System managed size

  Right click my computer, properties, Advanced tab, Performance... Settings, Advanced tab, virtual memory... Change.

  Set the paging file size on:

  System managed size

  Don't forget to click on Set (to be defined), OK (several times) and then restart your computer.

  Windows XP will attempt to affect a swap file approximately 1.5 times the total amount of RAM installed on your system.  To manage the size of paging file Windows XP is enough for most configurations.

  If your system is not set to the size of the managed system, you must determine how it changed and why (usually a bad reason), make a note of the current settings to change them back later if necessary, and then change the setting to the size of the managed system, click on the Set button and then click on apply to apply the changes (you will be asked to restart).

  "Because someone told me to" is not a good reason to start making adjustments to the size of pagefile.  Setting just above to enlarge it by an arbitrary value can ease the symptoms of the problem and stop message, but may not result in the best configuration for your system.

  If you want your system to operate as efficiently as possible, you must understand what is happening and fix it properly and not only begin to try things or make some arbitrary adjustments.

  The size of the pagefile can really need adjustment, but you should at least try to know what you're doing and why you need to do.  It is unlikely that anyone can tell you how to adjust your settings properly without more information.

  If you don't know what are the best settings, or if you are not sure what should be your settings, follow these steps so that we can see what you have:

  Click Start, run and enter in the box:

  Msinfo32

  Click on OK and when the system info summary appears, click on Edition, select all, copy, and then paste the results here.

  There will be some personal information (such as the user name and the name of the system), and what appears to be personal information for you, simply delete the personal information of the pasted information.

  This minimize back Q & A and eliminate the guesswork and assumptions.

• Update problem can remove them except for the most recent? Thank you!

  Hello!  In Control Panel, there are about 20 programs that all say the same thing.  They are updated for Windows and IE 8 security.  The only difference is the date, which date as far back as 2010.  Can I remove them except for the most recent?  Thank you!

  # They are all necessary.

• How to clean my disk overloaded space in C drive? Almost complete. Says "low disk space". Thank you in advance.

  How to clean my disk overloaded space in C drive?  Almost complete.  Says "low disk space".  Thank you in advance.

  I'd be interested to see a report of Disk Defragmenter. Open Disk Defragmenter and click analysis. Select view report, and then click Save as and save. Now find VolumeC.txt in your My Documents folder. Open the file, and place the cursor anywhere in the file, select Edition, select all to select all the text and copy and paste into the body of your message. To do this, before you run Disk Defragmenter because it is more informative.

  Follow a few basic maintenance note.

  1.5 the tool provided in Windows to remove unwanted temporary files is disk cleanup. To access this tool select Start, all programs, accessories, System Tools, cleaning disk to emptying your trash, delete temporary Internet files and other selected options. I recommend also you click Other Options, System Restore and delete all but the last system restore point. You must then run Disk Defragmenter.

  1.6 using the system restore option is most appropriate when your system is slow and you need to increase the free disk space on your C partition. If you have errors that could be solved by using the system restore to your system settings back to before that the error occurred initially, do not use this option.

  1.7. If more than one person uses the computer and they have their own user log you need to run Disk Cleanup in each user profile that you want to delete all the unwanted files.

  1.8. a better alternative program to disk cleanup is cCleaner. The freeware version works well for a home user and must be downloaded from Piriform program provider:
  http://www.CCleaner.com/download

  1.9. When you open cCleaner you will see four large icons to the left of the window. Here's cleaner them, registry, tools, and Options. For routine maintenance, you normally acceding Cleaner (this is not the mentioned registry cleaner later). When using for the first time only, you can accept the default settings.

  1.10. some observations on the parameters. On my computer, I do not have the boxes before the passwords saved selected. In a less secure environment, you could check this option and set cCleaner to run automatically when the computer starts. You also cannot check the boxes in front of shortcuts from the Start Menu, desktop shortcuts and historical form. You must check the boxes according to your needs. Bad first time options causes irritating no disasters.

  1.11. the second icon that you see when you open cCleaner's registry. A reserve many experienced users have about cCleaner, it's that it comes with a registry cleaner. This tool should not be used. By using a registry cleaner, but it is the case, provides significant benefits and there is always the risk of creating insoluble system errors, which cannot be resolved by reinstalling the operating system and all that that implies. You will avoid any possible problem of not not by clicking on the Save icon.

  1.12 the third icon that you see when you open cCleaner is tools. If you click this icon, it gives you access a routine plus service options. The first two tools are uninstalled and commissioning. I do not use these tools, preferring to use other software options. The third tool is the restoration of the system, which is covered in the next paragraph. The fourth tool is Wiper Drive and you will find reviews about this tool later

  1.13 removing the system restore points can be important if you have little free disk space. The ability to delete them is one of the tools options. You can selectively remove those created in less important moments. This makes it easier to hold the restore points for long periods without keeping large unwanted files, whose inflexible approach to disk cleanup fails to offer.

  1.14. you can't remove the last restore point using the cleaning disc or cCleaner. If the last restore point contains malicious software, you can turn off and then turn on system restore. This has the disadvantage that restore all points are removed when you want to keep more restore points that are not infected. How to get round this problem is to create a new restore point when you are satisfied with your computer is free of malware and then remove the infected restore point.

  1.15. in normal circumstances, you probably rarely need to use Driver wiper. However, there are situations like if you gave the computer to someone else, then the tool may be useful. Please note that the wiper Drive, opening, generates a warning message, which should not be dismissed lightly. Using wiper Drive for the wrong reason could have serious consequences.

  1.16 the fourth icon is labeled Options. Many configuration options are available here. You can configure cCleaner to run when start you but remember that this will slow down the boot. Another setting allows you to include or exclude cookies. Yet another allows files named to exclude.

• Hello Support Adobe, I bought a picture more than 24 hours ago. My account says I have the photo but I don't have access to this download. How a download of the image? Thank you for your time.  #AD018888397

  Hello Adobe Support,

  I bought a picture more than 24 hours ago. My account says I have the photo but I don't have access to this download. How a download of the image?

  Thank you for your time.

  #AD018888397

  Purchases are available immediately. Just follow these steps: I downloaded my 10 free images and they all have the Adobe watermark on them, so I can't use them. Why do they have a watermark on them?

• I lost the small contraption white balance eyedropper and the possibility to change the exposure and can not find a way to get them back! Help! Thank you!

  I lost the small contraption white balance eyedropper and the possibility to change the exposure and can not find a way to get them back! Help! Thank you!

  You say you have lost the tab "tool"?

  If so, just right click on one of the other tabs and select "basic" in the context menu that appears.

  

• With the updated 31.4.0 version - demand for return confirmation and email send priority disappeared. How can I access them now? Thank you!

  With the updated 31.4.0 version - demand for return confirmation and email send priority disappeared.
  How can I access them now?

  Thank you!

  Did? I find in the title bar of the alternatives

• Received an email from MacPaw saying I could speed up my computer in El Capitan with their 5 steps. Worth it? Is MacPaw safe? Thank you.

  Received an email from MacPaw saying I could speed up my computer in El Capitan with their 5 steps. Worth it? Is MacPaw safe? Thank you.

  N ° report the message as spam or delete it. MacPaw is the author behind the scam "CleanMyMac.

• Firefox will supports Windows XP after it's retired. Because Google Chrome says apparently it will be. I am happy using Firefox and curious. Thank you!

  Wanted to know if Firefox supports Windows XP after it's retired.
  Read on the internet that apparently Google Chrome will support it.
  I don't like Google Chrome and will continue with Firefox but hoped they will support Windows XP.
  If this is not the case, what kind of problems would I have?
  I was told that I have a good virus program would be nice.
  I have Avast which has worked well for me.
  I do not have a personal thing on my computer to worry if someone would try to hack.
  Only thing I really do a lot of is to go on my writing groups in Yahoo. But it would be nice to not worry about Malware, threats etc like that and having to run my scans every day.
  I'm not at a point where I can buy a new computer, or to afford to go to Windows 7, which is always being updated.
  Heard of that Windows 8 is a nightmare and, apparently, a new version that the user is more than friendly Windows 9 didn't will be out til later this year or early next year.
  Thank you!

  Hello Debrajean, this point mozilla will continue to support windows xp: www.neowin.net/news/mozilla-to-support-firefox-on-windows-xp-after-microsoft-ends-support-for-the-os