Where Soft Proofing adjustable and specific documents?
Hello
I don't seem to find where the parameters can be changed / adjusted.
Thank you
Raphael
With Soft Proofing on (1) click on the drop down profile menu (2). If you don't see the desired profile choose 'other' and all the profiles that you have available will be listed (3).
Tags: Photoshop Lightroom
Similar Questions
-
Soft Proofing and adjustment brush / Spot removal problems
Hello
Since the last update (at least I think) to 6.5 that I have a problem when soft proofing is turned on. In particular, the adjustment brush and the brush of spotting does not work smoothly. The first problem is that when you try to make smaller or larger brush (keyboard and Tablet) the brush shows the size have immediately brush outside the window or click on the image to see the size of the brush (brush of detachment and adjustment) and the cash withdrawal is very slow and if I want to spend the part I want to remove to make it better appearance it does not update immediately when moving. Also when using either the computer fans brush starts to kick in and work hard. Tried two GPUs and extinguish the same result. but as I turn soon soft proofing off the coast of the brushes as planned work and also the fans to stay out of
so if someone has problems with these two brushes you might want to look into the option to see if Proofing is enabled
I have not noticed this. However, I usually do all my withdrawal in cash without proofing turned on. Normally, the only thing I do when the soft proofing is set things like saturation, lights and shadows. Things that affect the overall appearance of printing based on the book that I use. What are the specifications of your computer? OS, RAM, etc.
-
Is Acrobat Pro just for us. We have an employee handbook that needs editing. A part is current pdf, some of an earlier version. You want to get all in a manual, the table of contents automatically adjust and links to specific pages of the table of contents.
Acrobat Pro is certainly not the right tool for editing. You want to change the manual using the source - MS Word files for example. Once you have the full changes including OCD work as you want, Acrobat Pro is the tool to convert the source document to PDF format, and ensure the accessibility requirements of 508 - and preferably ISO 14289 (PDF/UA) - are met.
-
Soft proofing and color profile
Dear all,
problems shall comply with archival ink jet print places I tried. I am now looking at "soft proofing" which I think is not without her pearls. The problems I've experienced before where the images were no converted the profile is that sometimes they would print at great expense properly and sometimes they would not, again at great cost. If the image is converted to the correct profile, in this case Hahnemule, will the embedded profile that the image will print consistently and 2 different days?
Images must be in Adobe RGB (1998) or sRGB, in both cases with
embedded profiles, but only one type for each poster.
The printer must apply 'Use integrated source profile' mode and a
Destination profile which is valid for the paper and the printing process itself.
Hahnemühle says almost nothing.
A few parameters: weight in g/m², resolution in dpi, dithering mode
(pixelation), CMYK or CMYK + LightC, + LightM, or other combinations with
several grays, or to Orange and green. Given the fact that inkjet
In addition, often use a profile of linearization, there is a good chance of
Errors of the operator.
This should be fixed in advance. Then the appropriate profile can be used
for ever.
IMHO, a wedge of FOGRA control is used for the printing of the evidence,
which means "simulate the appearance of offset printing with inkjet.
At least I use the corner of control in this situation. It requires a
spectrophotometer, incidentally.
In all cases of doubt I would print a typical image with well known appearance
in the same process.
For example, p.4 / p.5 here:
http://www.FHO-Emden.de/~Hoffmann/a3gencolorhigh.PDF
Cordially - Gernot Hoffmann
Regarding the last post #3: If the print operators are not familiar with
color profiles, then the situation is desperate.
Post edited by: Gernot Hoffmann
-
I want to develop an application Live TV for BlackBerry PlayBook. Please guide where can I find the specifications such as width, height, and icon sizes and design factors etc.
Guideleines of the user and the specifications on the sizes of icons etc to BlackBerry PlayBook OS Applications
OK, I downloaed the pdf below for UI guiderlines
UI_Guidelines_BlackBerry_PlayBook_Tablet_2_1.PDF
Ok
-
Normally, when you open the page palette in InDesign, it is divided into two. The upper part is where is the master page (and a page named none), while the lower part is where are the actual pages of documents. Unfortunately when I opened my palette (InDesign CS 6 on a Mac), there is no upper and lower part of the page-only the lower part is displayed. When I put my cursor on my pages, it tells me that I "Applied A-master".
Why not my top shows (A-master and none)? The pages that I don't "Act" like master pages - for example, I can't get past page numbering.
Any help is appreciated. Thank you!
It looks like the upper part may be in a State reduced - the line was pulled up.
Just of the cursor on the line that separates the upper and lower sections, and drag it to the bottom.
-
Bluescreen when the soft proofing
I just started to have the blue screen with an X, developing mode, while the soft proofing and seeking the warnings of the range. Proofing also no longer works (image remains the same). Recently made "Digital Camera RAW Compatibility Update" and recently upgraded to El Capitan, and this issue seems to be passed eventually. Since having the problem, I've just updated to the latest version of LR, nothing helps. With the help of iMac (mid-2010) with a lot of memory... everything worked fine last week. Here is the system of information displayed on the performance tab in the preferences of LR:
Any advice would be appreciated. Thank you.
Sorry for my delay... Thank you for your response. I always have, I could not proofing to work even though he seems to have the right icc profile listed. In fact, the profiles were more where they should be in the ColorSync folder. Reinstalled them, and everything is good to go. GPU is activated and not blue X.
-
Satellite Pro 4270, information and specifications
can someone tell me where I could find information and specifications on this laptop I'm particularly interested to know if there is an internal microphone of the laptop... Thank you
Hello
This model does not have an internal Microphone.
Measure specifications are:Cel-500/64-320 MB/6 GB/24xCD
BR
Tom
-
Restricting calls between a subarea and specific extensions on Cisco VCS
Hello, I use Cisco VCS 8.5.3, my goal is to restrict calls between a subarea and specific extensions.
I tried following solutions:- Download of XML strategy
- Use of political appeal web interface in order to limit calls
XML file:
But when I apply the XML file, or try using the web simple rule (for example: 11111 12222 destination source, dismiss the action) I'm still able to place the call to 11111 to 12222.
What can be the cause of the problem and what else can I try to be able to prohibit calls between a particular Subzone and exentions?
Attached, is an example of CPL script that should work. Using this script, CPL, I was able to block calls to a subarea set to a destination alias located in the subzone of default and was always able to call any other end point in the default subfield without problem. Note that you must enter the name of the subarea, as you have configured on the VCS, including spaces if they exist.
The scenario is based on the example of CPL "limiting access to a local gateway" X8.5 VCS Administrator's Guide on pg 413, other documents of CPL reference and examples can be seen starting on pg 410.
-
I want to buy adobe where I can save and print in PDF format, also check out files, editing files etc... I also want to have photoshop when I can make nice ads and brochures. Which plan is for me? Thank you.
Hi mirelas80826977,
As you search for the Acrobat application and two Photoshop then either you can go for separate program Adobe Document Cloud programs and CC photography
or go for the Creative individual cloud program
View all rates and details here:
Plans and prices. Adobe Acrobat DC
Pricing plans and creative Cloud membership | Adobe Creative Cloud
Thank you
Abhishek
-
Problem:
1. How can I increase the space of name display in the form, material and specification of the nutritional profile?
2. how to increase display space for the name of the sheet in the history section at the top of the screen?
Thank you
Hello Nefertari,
You try to view more characters in these areas?
Each of these locations is plugable using custom plugin extensions.
For example, you can go into extensions/config/CustomPluginExtensions file and add the following nodes under the node FormatPlugins.
I think that the default values for the sites are set to 50 characters, so I had to be up to 100 characters (note NameMaxLength = parameter in the attribute FactoryURL 100).
It will be applicable to all specifications, if you need something more specific, you will have to create your own class where you can check the type of technique.
Make your own judgment in what concerns how enough will be the look on the screen after you increase the length to a large number, but you can always control the formatting in your own class.
See this older post for more information https://community.oracle.com/thread/2562965
Is that what you're looking for?
Dmitriy
.
-
[LR 5] Soft Proofing - Gamut Warning monitor vary with the profile of the printer?
Hello
There is something that I do not understand when you use the function of gentle fermentation in LR.
The monitor Gamut Warning feature (top left icon of the histogram when Proofing is enabled) is supposed to show us what colors in the image can be reproduced on the screen. Right? If I understand correctly, the warning is calculated by comparing the current image (virtualized by LR in the Melissa RGB color space) to the display range (read active calibration profile).
Then why LR different show "out of gamut" areas for display when I change the profile of the printer selected when using soft proofing? It's not logical for me.
I missed something?
Thanks in advance.
Indeed, they are vague on this issue. My thinking on the subject comes to converse with people from Adobe here and elsewhere, as I'm sure that I'vce has discussed this issue on the forum before. As far as I know the caution monitor is supposed to be calculated after the conversion to the profile of the printer so that you get an idea if the soft resistant color is displayed accurately. This must be the correct behavior as waterproofing can really take a color either in or out of the monitor range. I'm not 100% sure on it though, but definitely, he explains how he behaves.
Also, if you calibrate your screen and write a display icc v4 profile, the situation changes once again as today the display profile can actually contain a perceptual rendering intent, making it even less accurate and the assumption of simple linear conversions one-to-one between color spaces is not valid. Some calibration software packages do however, but there are a few exceptions.
If you want to know if your image is outside the display profile, you can indeed deceive the test to allow you to select a display as the printer proofing profile profile. In principle, you can select a standard workspace such as prophotoRGB it and get results that make sense. But you certainly don't want to have a random printer profile chosen for the reasons cited above. I guess they could add some tricks to detect that you have selected the profile of the current view and not one profile of another to randomly display and then collapse the interface, but it's a case of edge I doubt Adobe would give priority to this. It works very well so simply, you realize that you have selected your profile screen like the printer proof profile.
-
Convert to profile &; Soft Proofing.
Hello
My apologies if this has been requested and replied. Some responses on proofing looked on the forums has helped, but not hit the nail on the head.
I am grateful for the ideas, instructions, pointers.
I. According to the instructions of the printer that prints my work, I have converted my image profiles to Dot Gain 20%. I want to assure you that I see on my screen will have a) be a tight that she (woman, the print job) will see on his screen. and (b) give me an idea of how the print job and the printer (Espson stylist Pro 4800) will interpret. It is logical to me that I should change my format of test for Dot Gain 20%, no? Have I not this wrong?
II. I also need to do a series of JPEG files which will be visible on a variety of screens, each with a different brand and calibration. These JPEG files should be as convincing a match to print as possible, with compensation, of course, carried out for the paper, ink, etc. The game should be close. Is there a standard for ever which will allow me to see what is likely to appear on a given screen. An order, I know. I was wondering if I should just inform viewers to display JPEG images with their monitors, assign a certain color profile - or if I should send them a monitor profile as well as JPEG files.
Thank once again for ideas.
Best-
Hardware: iMac 27 "; Native Gamma 2.2. CS6.
A little guide:
You will need a valid of monitor profile (MP) and a printer profile (PP) for
Epson 4800 for a printing (ink, paper, well-defined resolution process
and much more).
If your impression people do not have a profile, and then not to print from there.
A PP contains everything about the Dot Gain.
Let the images in sRGB (sRGB workspace)
Edit by PhS until it looks nice
In the event, choose your PP
Rendering Intent Relative Colorimetry, Black Point Compensation
Observe the changes of the image, Soft Proof on / off
Failure to comply with the warning range, using a color of alarm
If the changes are strong or / and if the Gamut Warning zones are large
(not only highlights or some leaves on the trees), then change your image.
This can be explained by simple means.
If the image looks nice and save with sRGB embedded profile
and leave it to print, using exactly the defined printer process previously.
Test is done by software, here Photoshop, for simulated hardware.
which is entirely defined by the PP.
sRGB is a de facto standard for the Web.
If your images are in a colorful way, then it could be recommended
working entirely in AdobeRGB (1998) = ARGB.
Image in aRGB, work space ARGB.
You can do this after the clarification of this issue with the impression people. Of course
the aRGB profile must be incorporated, but even in this case, there is a good chance
the people of print is not familiar with profiles and assumes sRGB as
Profile of the source.
Putting, you would need two versions - one for printing, one for the Web.
Cordially - Gernot Hoffmann
-
How can I disable the fields highlighted as a frame within a specific document?
I need to disable the fields highlighted on a specific document, regardless of point highlight fields 'users' setting. The fields are being filled with information obtained from a page of entry on my site (not the pdf itself). After a user presses submit, this pdf appears, but the fields are: a) has highlighted b) variable. Bonus points if you can tell me how the fields so that they cannot be changed. Using the 'security' feature and lock by password do not work if I chose to not editable fields because I do not think that the site can enter the information about the pdf. Thank you very much.
Have you tried to set the fields read-only?
-
Storage of MS-Word and PDF documents in the database that is downloaded through APEX
I want to enable users to download MS-Word and PDF documents that they created / edited outside of the app to the APEX for storage in the database with other data in the app.
I know that I should use a queue item browse an area for this purpose.
I have a few questions:
1. what type of database data is best for storage of MS-Word and PDF docs? CLOB?
2. How can the user see that the file has been downloaded? In other words, how can they see the name of the file has been downloaded? I want to show this on the page for later viewing. I downloaded a document, but later, I have no way to see that the document has actually been downloaded. On the page of the APEX, the browse file evidence not whether or not a previously downloaded file.
3. how the user can download the previously downloaded?
4. is there a way to give users the ability to edit a document in an APEX application where they can do the editing of type MS-Word (the font size, type of font, bold, italic, etc.)?
I know I ask myself a lot here and I appreciate your comments.
-ReidIn my case, I am downloading screenshots of my application and then display them. You can feel free to use it if you want, the code has been taken for most examples of downloads of files sent by others. Here is a code to help you get started:
Description Table file
CREATE TABLE FILE_UPLOAD (name VARCHAR2(4000) PRIMARY KEY, subject VARCHAR2(4000), id NUMBER, blob_content BLOB, mime_type VARCHAR2(4000), PAGE_ID NUMBER);
How to download file
IF ( :P20_FILE_NAME is not null ) THEN INSERT INTO FILE_UPLOAD (id, NAME, SUBJECT, BLOB_CONTENT, MIME_TYPE, PAGE_ID) SELECT ID,:P20_FILE_NAME,:P20_SUBJECT, blob_content, mime_type, :P20_PAGE_ID FROM APEX_APPLICATION_FILES WHERE name = :P20_FILE_NAME; DELETE from APEX_APPLICATION_FILES WHERE name = :P20_FILE_NAME; END IF;
Download Image definition of the procedure
CREATE OR REPLACE PROCEDURE download_my_file(p_file in number) AS v_mime VARCHAR2(48); v_length NUMBER; v_file_name VARCHAR2(2000); Lob_loc BLOB; BEGIN SELECT MIME_TYPE, BLOB_CONTENT, name,DBMS_LOB.GETLENGTH(blob_content) INTO v_mime,lob_loc,v_file_name,v_length FROM FILE_UPLOAD WHERE id = p_file; -- -- set up HTTP header -- -- use an NVL around the mime type and -- if it is a null set it to application/octect -- application/octect may launch a download window from windows owa_util.mime_header( nvl(v_mime,'application/octet'), FALSE ); -- set the size so the browser knows how much to download htp.p('Content-length: ' || v_length); -- the filename will be used by the browser if the users does a save as htp.p('Content-Disposition: attachment; filename="'||replace(replace(substr(v_file_name,instr(v_file_name,'/')+1),chr(10),null),chr(13),null)|| '"'); -- close the headers owa_util.http_header_close; -- download the BLOB wpg_docload.download_file( Lob_loc ); end download_my_file; /
don't forget to grant rights of procedure for the use by any person
GRANT EXECUTE ON download_my_file TO PUBLIC
Display Image definition of the procedure
create or replace PROCEDURE "DISPLAY_IMAGE" ( inID NUMBER ) AS vMIME VARCHAR2(48); vLENGTH NUMBER; vFILENAME VARCHAR2(2000); vBLOB BLOB; BEGIN SELECT MIME_TYPE, BLOB_CONTENT, NAME, DBMS_LOB.GETLENGTH(BLOB_CONTENT) INTO vMIME, vBLOB, vFILENAME, vLENGTH FROM FILE_UPLOAD WHERE ID = inID; owa_util.mime_header(nvl(vMIME, 'application/octet'), FALSE); htp.p('Content-length: ' || vLENGTH); owa_util.http_header_close; wpg_docload.download_file(vBLOB); END; /
Again, ensure that everyone has rights to execute the procedure.
GRANT EXECUTE ON DISPLAY_IMAGE TO PUBLIC
This does not create an editor in the browser, it simply creates a process simple upload/display. For a WYSIWYG editor that manages the PDF format or doc, you need something much more sophisticated, and I can't propose something here.
Maybe you are looking for
-
Hi, I write a program that will have two persistent buttons on the GUI 'next' and 'back', so the user can go forward or backward through a series of settings pages. What is the best way to implement this? I plans to display or hide the decorations of
-
Hi, after upgrading to win 8 to 8.1 win my converter (Silkypix) raw program running extremely slow and consuming 100% of CPU. VAIO all updates completed, all Win 8.1 updates made. ATM Radeon HD 7500 M / 7600M (Maj) with 2 GB RAM dedicated. In additio
-
How can I find that trying to access my yahoo email
How can I find out who tried to access my yahoo email account and facebook failed attempts?
-
BlackBerry Smartphones Re: Introduction
Hey guys. I'm a newbie blackberry "BOLD" owner. I have a problem of registration of my BB. I use a prepaid sim card by the way. I tried, many times, all that initially guide told me to check on my device. and I can't create an email because the optio
-
My hp dv6-6195 ca changes the display brightness when you look dark or black backgrounds
My laptop has started to get a question where I come back to a page with a black or dark background and it seems as if my brightness has dropped. If I transition to a page of white or clear, it slowly goes back to the original brightness. Is there an