Bluescreen when the soft proofing

Similar Questions

• Tecra S11 - bluescreen when the WiFi switch is on

  I've known several accidents suddenly blue screen, with apparently no advice. After several tests of different conditions I counted it takes place when the WiFi switch is on. So, it should be associated with Bluetooth or WiFi.

  Any suggestions how to proceed further? apparently I have the latest drivers (Windows 7 64)
  Thanks, Guido

  Hey Buddy,

  Have you already checked the BIOS if you have installed the latest version? If this is not the case check this on the Web from Toshiba site and make an update of the BIOS. Maybe it helps

  But I had a similar problem last year and the solution was exchanging the WLAN card.

  I think your Tecra S11 should still be under warranty and in this case that the repair will be free. :)

• Soft Proofing and adjustment brush / Spot removal problems

  Hello

  Since the last update (at least I think) to 6.5 that I have a problem when soft proofing is turned on. In particular, the adjustment brush and the brush of spotting does not work smoothly. The first problem is that when you try to make smaller or larger brush (keyboard and Tablet) the brush shows the size have immediately brush outside the window or click on the image to see the size of the brush (brush of detachment and adjustment) and the cash withdrawal is very slow and if I want to spend the part I want to remove to make it better appearance it does not update immediately when moving. Also when using either the computer fans brush starts to kick in and work hard. Tried two GPUs and extinguish the same result. but as I turn soon soft proofing off the coast of the brushes as planned work and also the fans to stay out of

  so if someone has problems with these two brushes you might want to look into the option to see if Proofing is enabled

  I have not noticed this. However, I usually do all my withdrawal in cash without proofing turned on. Normally, the only thing I do when the soft proofing is set things like saturation, lights and shadows. Things that affect the overall appearance of printing based on the book that I use. What are the specifications of your computer? OS, RAM, etc.

• [LR 5] Soft Proofing - Gamut Warning monitor vary with the profile of the printer?

  Hello

  There is something that I do not understand when you use the function of gentle fermentation in LR.

  The monitor Gamut Warning feature (top left icon of the histogram when Proofing is enabled) is supposed to show us what colors in the image can be reproduced on the screen. Right? If I understand correctly, the warning is calculated by comparing the current image (virtualized by LR in the Melissa RGB color space) to the display range (read active calibration profile).

  Then why LR different show "out of gamut" areas for display when I change the profile of the printer selected when using soft proofing? It's not logical for me.

  I missed something?

  Thanks in advance.

  Indeed, they are vague on this issue. My thinking on the subject comes to converse with people from Adobe here and elsewhere, as I'm sure that I'vce has discussed this issue on the forum before. As far as I know the caution monitor is supposed to be calculated after the conversion to the profile of the printer so that you get an idea if the soft resistant color is displayed accurately. This must be the correct behavior as waterproofing can really take a color either in or out of the monitor range. I'm not 100% sure on it though, but definitely, he explains how he behaves.

  Also, if you calibrate your screen and write a display icc v4 profile, the situation changes once again as today the display profile can actually contain a perceptual rendering intent, making it even less accurate and the assumption of simple linear conversions one-to-one between color spaces is not valid. Some calibration software packages do however, but there are a few exceptions.

  If you want to know if your image is outside the display profile, you can indeed deceive the test to allow you to select a display as the printer proofing profile profile. In principle, you can select a standard workspace such as prophotoRGB it and get results that make sense. But you certainly don't want to have a random printer profile chosen for the reasons cited above. I guess they could add some tricks to detect that you have selected the profile of the current view and not one profile of another to randomly display and then collapse the interface, but it's a case of edge I doubt Adobe would give priority to this. It works very well so simply, you realize that you have selected your profile screen like the printer proof profile.

• Copy of the judgment proof

  For some reason, my LR begins to create copies when I'm not working in the develop module, which is maddening that I find myself with all these copies and only want to make adjustments to my original proof. How to disable this option? I tried settings uncheck > evidence, but that did not work.

  Hi LynneHarty,

  Once in the develop Module, please press "S" key to turn off the test.

  Also, please make sure that see you histogram in the top right corner, not the Soft Proofing Panel when you press "S" key.

  Kind regards

  Tanuj

• In Lightroom 5, I see "Soft Proofing", "Show Grid" or "Auto" on the bath g mode to develop.

  In Lightroom 5, I don't see "Soft Proofing", "Show Grid" or "Auto" on the bar below the picture I'm in Lightroom 5r.

  Press the letter T to display the toolbar.

• How can I save by iPad 3 when the screen is black and nothing appears?

  How can I save my iPad in ITunes or iCloud 3 when the screen is black and nothing appears?

  Is the empty screen, because just the screen is broken, or is the iPad just dead? Have you tried a soft-reset/reboot it?

  At least you can see what you touch on the screen of the iPad, you cannot force a backup to iCloud.

  If the iPad still works and is connected to wifi, a backup should automatically happen (if iCloud backups are enabled) if it is connected and the locked screen.

• Tecra R850 cuts the power to the HARD drive to the soft reboot

  Hello

  We have hundreds of these laptops and use the HARD drives encrypted in them.

  A soft reboot, they cause the HDD re - encrypt itself due to loss of power when you soft restart.
  Someone at - it a work around for this (parameters of the BIOS, the BIOS update) that won't cause this issue for us?
  I believe that we are currently on version 2 BIOS. "something"if it helps everything.

  Thanks in advance,

  Sean

  The laptop turns off a moment during a warm reboot. An update of the BIOS will not change that.

  Maybe you should use Bitlocker.

• iOS 9.3 adds the ability to bring up the soft keyboard

  9.3 iOS release notes can be found here:

  Download iOS information 9.0 - 9.3

  In this document, a section lists improvements iOS when a hardware keyboard is attached:

  Fixes and improvements to the hardware keyboard

  • Allows you to use the arrow keys to navigate through the lists in Spotlight, Mail, and Safari
  • Allows the use of the space bar to scroll in Mail
  • Improves performance when you use the space bar to scroll in Safari
  • Adds the ability to show the software in the shortcut bar keyboard when a hardware keyboard is connected
  • Resolves an issue that could prevent the release of an iPad using the physical keyboard
  • Fixes an issue that caused hardware keyboards to hang in the pages of connection in captivity
  • Resolves an issue that could cause the input field for Messages to disappear behind the shortcuts bar when connected to a hardware keyboard

  I am curious about this one in particular:

  • Adds the ability to show the software in the shortcut bar keyboard when a hardware keyboard is connected

  someone has found a way to make use of this feature?

  I tried dragging the bar formatting keyboard without result, and there seems to be no software button that provides this feature.

  My old workaround is to simply turn Bluetooth on / off power via the control center.

  Found an answer! Quoting below:

  TL; Dr: hold the arrow pointing downwards!

  With the release of the iOS 9.3 that the ability is added to bring up the soft keyboard on the shortcut bar when a hardware keyboard is connected in the arrow button. This is a really interesting feature. But when the user is not pressed the button the arrow but accidentally hit the button, the shortcut bar will disappear and do not appear until you restart the application.

• HP Color Laserjet M277n MFP: How to use the black cartridges only when the color toners are empty

  Hello team HP,

  I recently bought a HP Color Laserjet MFP M277n I printer I print black & white user only and really don't need color prints. How to set the printer options to print only black & white? How can I replace only the black cartridge when the color cartridges are empty? How many prints (approximate), we can take by toner?

  Kind regards

  Christèle

  Hi @Pavumba,

  Welcome to the Forums of HP Support!

  I understand you're wondering how to use black ink only on your HP Color Laserjet M277n MFP printer. I would be glad to help and don't forget to come back to this thread and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

  I see that you wonder if you need to replace the color cartridge when it is low. This printer is a printer AIO, therefore, you need to replace the ink cartridge when it becomes too weak to be able to resume printing. However, if you print mostly in black, you can configure a preset black only to print in black and white. This would help reduce the use of the color cartridges.

  NOTE: Composite black - for black and white images and photos, a mix of colors called 'composite black' can be used to achieve the quality significantly improved picture and soft gray tones that can be achieved with only black toner. For users who want to print images using just black toner, many HP printers color customer offer configurable options allowing the client to print using only black toner. For example, by selecting "print in grayscale" in the printer driver Specifies print using black ink only. For more information about the use of the toner cartridges, please see this article: how the Toner is used.

   

• Computer crashes with blue with "BUGCODE_USB_DRIVER" error screen when the computer is in hibernation.

  Original title: blue screen Crash to Hibernation

  Hello

  My laptop had been for some time and the fan started making a very loud noise, in that there is no generally when the machine is cold, so I decided to Hibernate for awhile. Then, I got the blue screen and a crash report, and I have no idea what this means, or how serious it is. Help, please?
  Signature of the problem:

  Problem event name: BlueScreen

  The system version: 6.0.6002.2.2.0.768.3

  Locale ID: 4105

  More information about the problem:

  BCCode: fe

  BCP1: 00000008

  BCP2: 00000006

  BCP3: 00000001

  BCP4: 86CFE988

  OS version: 6_0_6002

  Service Pack: 2_0

  Product: 768_1

  Files helping to describe the problem:

  C:\WINDOWS\Minidump\Mini022012-01.dmp

  C:\Users\Nick\AppData\Local\Temp\WER-192910-0.SysData.XML

  C:\Users\Nick\AppData\Local\Temp\WERBEBC.tmp.version.txt
  The blue screen, I saw something BUGCODE_USB_DRIVER.
  Thanks for your help!

  The minidump file showed a BUGCODE_USB_DRIVER (fe) error caused by the stop usbhub.sys:

  BUCKET_ID: 0xFE_usbhub! UsbhTrapFatalTimeout_x9f + 28

  The usbhub.sys (by default the USB hub driver) is a Windows system file, but it is quite possible the problem is a third-party driver or hardware related.

  What I would say, is to update the wireless driver by installing the next update:

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=ob-62508-1&CC=US&DLC=en&LC=en&os=2093&Product=3652100&sw_lang=

  You can also benefit from the update all the drivers available from HP for laptop:

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=2093&LC=en&cc=us&DLC=en&sw_lang=&product=3652100

  I would also, at least temporarily, uninstall Daemon Tools as his driver, the dtsoftbus01.sys, has been known to cause problems in some configurations.

  You also have to install the following hotfix that should update the USB stack:

  http://support.Microsoft.com/kb/2547549

  If the problem persists can provide you with the files minidump resulting.

• Unexpected stops when the cd player is ejected

  Unexpected shutdown takes place if the cd player is ejected and a blue screen appears.

  Signature of the problem:
  Problem event name: BlueScreen
  OS version: 6.0.6002.2.2.0.768.2
  Locale ID: 16393

  More information about the problem:
  BCCode: d1
  BCP1: 00000000
  BCP2: 0000000 A
  BCP3: 00000000
  BCP4: 822A 7289
  OS version: 6_0_6002
  Service Pack: 2_0
  Product: 768_1

  Files helping to describe the problem:
  C:\Windows\Minidump\Mini070510-01.dmp
  C:\Users\Nireeksha\AppData\Local\Temp\WER-53477-0.SysData.XML
  C:\Users\Nireeksha\AppData\Local\Temp\WERF797.tmp.version.txt

  even bury them and cd playback is not possible.

  hardware problem is not detected.

  So can I please get acquainted with the appropriate problem I have and the clear solution for him...

  When the behavior started? Did you recently add or remove any hardware or software?

  , Start here: you can download the c:\windows\minidump content to SkyDrive and provide a link?  If you have trouble downloading the files, copy them to the c:\windows\minidump folder in a new folder on your desktop and upload them from there.  

  Consider the following general guidelines for dealing with bluescreens.

  Consider running chkdsk on all partitions.  Leave complete chkdsk on each partition and see if that helps.

  Also consider running SFC/scannow.

  If you start in safe mode, do you still feel bugs? What if you do a clean boot, or boot device?

  Consider the memory with memtest86 or Windows Memory Diagnostic test. Note that memory that pass the tests isn't necessarily good memory - he not only failed a review.  Examine systematically to eliminate the system RAM - run with a few modules for awhile and see how things are going. Then try the other modules.

  Other common suggestions include ensuring drivers are up to date, but also to ensure that you use the latest version of the BIOS.

  It may be useful to use the driver verifier.  To activate the... Driver Verifier start-> verifier.exe-> OK-> create standard settings-> next-> driver select the names to a list-> next-> sort by provider-> select all other Microsoft drivers-> finish and OK your way out of the dialog box.

  Then restart and use the system as you normally and wait for a problem.  In case the system does not completely start after activation of the Verifier, boot mode safe and run driver verifier and tell him to remove the changes.

  Wait for a bugcheck occurs after you have enabled the auditor as described, and then download the dump on your SkyDrive and provide a link.

• Blue screen when the system goes into hibernation with BCCode: 9f

  Every time when my laptop back into hibernation mode, it gives me option to start in safe mode or start windows normally. When the computer starts, it gives the error message. :

  Signature of the problem:

  Problem event name: BlueScreen

  OS version: 6.1.7601.2.1.0.256.48

  Locale ID: 1033

  More information about the problem:

  BCCode: 9f

  BCP1: 0000000000000003

  BCP2: FFFFFA800B39F050

  BCP3: FFFFF80000B9C3D8

  BCP4: FFFFFA800F83AAB0

  OS version: 6_1_7601

  Service Pack: 1_0

  Product: 256_1

  Files helping to describe the problem:

  C:\Windows\Minidump\082313-10998-01.dmp

  C:\Users\ilyasm\AppData\Local\Temp\WER-108108-0.SysData.XML

  Based on a similar thread, I tried to apply the KB975599 patch, but get the following message if poster "this update is not applicable to your system".

  I downloaded the minidump in skydrive at the following link.

  https://SkyDrive.live.com/#CID=F6050197253DE2F2&ID=F6050197253DE2F2%21119

  I use a Lenovo T420s laptop.

  IM

  All of these related usbehci.sys Microsoft USB 2.0 Enhanced Host controller driver Miniport takes too long to respond.

  What USB devices have connected you?

  Here are some suggestions for fixing USB
  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-USB-devices

• Push leads to SFDC when the contact opens an email but has not clicked

  Hello world

  I have to push leads to SFDC when the contact opens an email but has not clicked. I have a program generator that updates the CRM. How my canvas campaign looks like so I can push should conduit who opened an email but fact not clicked and dimension as 'Normal '? Should I create another program for this generator? Thank you!

  OK, looking at your detailed requirement, I think it's more that just to have two separate lists because you will also need to update contact record to see who has clicked and opened etc... (unless someone of other comments on this subject and provides a simple solution here).

  I suggest you explore approach to lead scoring. I think it would be much better option to have to go through sharing lists / route filters.

  Top scoring model, you can define the criteria of open clicks vs and give them scores... In the future, you can add additional criteria too for example if the person has submitted a form, visited a web page or a landing page of Elqoua etc. For each criterion, you can set specific scores... You can find information about the partitions of lead here... Eloqua10 drive rating Resource Center (there may be more available resources, so research topliners).

  It may take time for you if you are not familiar with the notation of lead but will future proof solution.

  If it helps at all then the way we manage click and opens with a form blind on the clicks... so whenever the user clicks on a link in the email they are passed through a form unknown / hidden and on the form, there is normally a specific value that identifies them as users click to get these users to SFDC straight on a daily basis.
  Then opens (excluding clicks) is learned separately and we normally and loaded separately (depending on budgets of telemarketing etc.). Having said that we are also developing implementing lead scoring model.

  I hope this helps.

  PS: on your question about food... Yes, it is basically adding members to a step... using the charger, you can automate the process. You can find create option charger at the top right in the program (as members).

• Where Soft Proofing adjustable and specific documents?

  Hello

  I don't seem to find where the parameters can be changed / adjusted.

  Thank you

  Raphael

  With Soft Proofing on (1) click on the drop down profile menu (2). If you don't see the desired profile choose 'other' and all the profiles that you have available will be listed (3).