Where the files transferred via bluetooth stored on Windows 8?

Similar Questions

• How to display the name of device to the file send via Bluetooth

  I get this Message:

  Receipt of file Conformation

  You want to receive a 00:13:70:69:95:84 file?

  My Question is how it can display the name of the device not the address of the device?

  Post edited by: hazzaa

  The same situation when I want to send pictures to cell phone on my laptop. I didn't find any option how to change.

  When I send photos from mobile to mobile phone laptop computer (device name) name is displayed. Try to check the properties of the external device. Maybe you will find way to change this.

• Is there any place in the windows vista where the files to write on the cd/dvd via a copied cd/dvd temporaily burner?

  Is there any place in the windows vista where the files to write on the cd/dvd via a copied cd/dvd temporaily burner? who can be recovered later in the case of the unsuccessful cd/dvd writing?

  Hi Usmansami rana,

  Integrated into the files of caching of Windows Vista to temporary folder when you start burning discs in Windows Explorer or by using a burning program. However, the temp folder is get deleted as soon as the burn completes successfully or not and you will not be able to recover the files.

  Hope this information is useful.

• Error when you try to play audio files: Windows Media Player cannot access the file. The file may be in use, you won't have access to the computer where the file is stored

  Windows Media Player cannot access the file. The file may be in use, you won't have access to the computer on which the file is stored, or your proxy settings are may not be incorrect.

  I hope someone can help on Win 7 64 bit, music is taken on a disk usb2 external hard... I had no problem until today when the message in the title appeared next to each track, with a little red cross.

  I already deleted database library as suggested by some of the forums, also disabled the media as a feature of Win 7, rebooted and then re-enabled it.  I also disconnected externally and restarted that as well, I'm also the same mistake with a cd in the cd drive as well.

  Can anyone help?

  Hello

  This error may occur for one of the following reasons:
  The file is currently in use. Close the file and then try again.

  You are not allowed to access the location where the file is stored.

  Follow these steps to grant all permissions in the folder where the files are stored:
  1. right click on the folder on the external drive and click Properties.
  2. in the Properties window, click on Security tab.
  3. now, click Edit , and then click Add.
  4. now, type everyone in the box and click OK.
  5. check the full control box.
  6. click on apply and then click OK.

  You can also try the mentioned below as follows:

  1. click on start.
  2. go in Control Panel.
  3. Select "SOUND".
  4. double-click on speakers.
  5. click on the tab advanced and then uncheck the enable audio enhancements.

  Kind regards
  Amal-Microsoft Support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Show where the files exist in spotlight

  Spot to determine where the files were stored. no more time (10.9.5).  Is there a way to find where the files are stored?

  Steven

  Select the file in Spotlight, then press and hold down the command key. Displays the path to the file.

• Error: "file 9xmigrat.dll on (unknown) is needed type the path where the file is located, and then click ok" when you try to install Windows Media Player 9.

  original title: WMP9 re-setup

  Hello. I use XP SP3 with all post-SP3 updates critical. Windows Media Player 9 does not work. When I try to reinstall, I'm stuck: the 9xmigrat.dll of file on (unknown) you need to type the path where the file is located and then click ok. I like WMP9 and do not want to use a newer version of WMP. I was not able to find 9xmigrat.dll

  This happens when I try installing to wmp.inf.

  If I try to install the MPSetupXP.exe, it does not either.

  Any ideas? TIA

  Thank you, David. It seems that the problem was caused by incorporating the updates for WMP9 using nLite. I made another CD of installation excluding these updates. A clean install of XP SP3 and WMP9 is working. Thank you for your response.

• When you use Adobe CreatePDF desktop printer where the files go?

  When you use Adobe CreatePDF desktop printer where the files go?

  The CreatePDF desktop printer is removed. Please visit https://forums.adobe.com/docs/DOC-5131 for more information.

• Where the owb user information is stored in the tables

  Hi all
  
  I use repository OWB 10.2.0.4.0. I need to know where the user OWB information are stored in Physical repository tables.
  
  Please help me with this?

  You can consult the following queries

  1. Select the owner from dba_objects where object_name = 'ALL_IV_INSTALLATIONS' and owner not in ('PUBLIC');

  2. select separate beneficiary, substr(granted_role,5,25)
  of dba_role_privs
  where substr (granted_role, 1, 4) = "OWB_".
  and substr(granted_role,1,6) not in ('OWB_D_', 'OWB_O_', 'OWB_A_', 'OWBR_')
  and default_role = 'NO '.
  and admin_option = 'NO ';

  Thank you
  Fati

• Can I remove the file 'SaveData.mig' after I run Windows Easy Transfer?

  Can I remove the file 'SaveData.mig' after I run Windows Easy Transfer?

  I used easy transfer to move files from an old computer to my new about 12 months ago. The SaveData.mig file takes 22 GB of space on the new computer. I would like to remove it but I don't know if it will mess up all my files that have been transferred to my new computer. Anyone know if I can delete this file in order to free up space? Thank you

  I agree with Mohdrafi - you can remove safely; However, you should have a more recent backup of your current files just to be on the right side (image FULL weekly backup and an incremental backup every day for an external HARD drive - I've seen too many people get burned when their drive hard breaks down or something worse and then they lose all their precious documents (, photos, audio and other files).  There ARE recovery procedures, but they don't always work, and they don't always get everything (especially if you expect to solve the problem or continue to use the PC in the meantime)- and depending on your version of Vista.  Delete this file will NOT affect the files and settings that you restored using the process.  Could have deleted it hours after that the process has been done (once you have a good backup) and it would have been very well then.  If you have a good backup, I can see no reason whatsoever to keep the file.

  If the normal delete function in Vista doesn't work, try using one of the following free products to remove the file.  Unlocker to: http://www.softpedia.com/get/System/System-Miscellaneous/Unlocker.shtml or file Assassin http://www.malwarebytes.org/fileassassin.php (with or without forcing the deletion: http://www.mydigitallife.info/2008/12/27/force-delete-cannot-delete-locked-or-in-used-files-or-folders-with-fileassassin/). These programs often work when normal functions remove Vista not work correctly.

  Congratulations to the use of Easy Transfer - this is a pretty cool tool isn't it?  Not sure how many threads that we have here people with issues or recoving given him--I saw a lot.  It seems easy on the surface, but when it doesn't work it can become quite complex and aggravating (and I know people who have unfortunately never were able to retrieve their data and settings no matter what we tried).

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• How can we decompressed the files compressed in disk cleanup? (Windows XP, SP3)

  How can we decompressed the files compressed in disk cleanup? (Windows XP, SP3)? I would like to do at once and not having to open each file, one at a time.

  Hi Johnm1938,

  Disk Cleanup tool detects removes the old compresses files unused for some specified duration and there is no way to decompress these files.

  You can use the method mentioned in the article for the unzip compressed on the computer.

  The use of the Compression of files in Windows XP

  http://support.Microsoft.com/kb/307987

• The files that are required to run Windows XP Professional have been replaced by unrecognized versions

  My files have been replaced by unreconized windows versions must resote the orginial version, they want insert me my cd have not... Professor of Windows service Pack 3

  The files that are required to run windows xp profecinal have been replaced by windows versions unreconized must restore these files insery your SP3 orginial version now... I do not have a CD and never no computer came already quiped.

  Hello

  You can check the link that contains the same information: Description of the Windows File Protection feature: http://support.microsoft.com/kb/222193

  Run the checker system files on the computer. Link, we can see: Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe): http://support.microsoft.com/kb/310747

  Note that: if he asks you the service pack CD, follow these steps from the link: you are prompted to insert a Windows XP SP2 CD when you try to run the tool on a Windows XP SP2 computer system File Checker: http://support.microsoft.com/kb/900910 (valid for Service pack 3)

• How to open the files .fxm and .fxr with fax windows 7 & scan?

  How to open the files .fxm and .fxr with fax windows 7 & scan?  These faxes have been received when I had Windows XP.

  Hello

  A file with FXR and FXM file extensions is a Document received from WinFax.

  You can open the FXR and FXM file by double clicking on it and let your PC decide which default application should open the file.   If no program opens, the FXR and FXM file, then you have probably an installed application that can view and/or edit FXR and FXM files.

  You can use a Notepad or another text editor to open these files.  Number of files is files read-only, which means little matter file extension, a text editor may be able to view the contents of the file properly.  This may or may not be the case with FXR and FXM files, but it's worth a try.

  How a FXR and FXM files:
  There are two ways to try to convert a file to a different file type:

  a. open the FXR file in its default program and choose to save the file open in another file format.

  b. use a softwarefrom online file conversion to convert these files to another file format.
  
  Note: using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  Thank you

• Error: "unable to start the service Object Push Profile (OBEX OPP)" when trying to transfer files from the Android phone via bluetooth

  Original title: Android mobile phone via bluetooth, I get an error on my phone.

  When I try to send a file by my Android phone to my laptop via bluetooth, I get an error on my phone saying "cannot start service Object Push Profile (OBEX OPP)". Reason: The return value is "false", but I can send files from my laptop to my phone OK.

  Hi steve3624,

  We recommend to check if there is no parameter which must be activated on your phone, then try to transfer the file to your laptop.

  We also advise to check if there are any service name Object Push Profile and start it. To do this, try the following steps:
  a. Click Start, type services.msc and press to enter.
  b. in the list of services, locate Object Push Profile service and double-click it.
  c. change the startup type to automatic and click on the Start button to start the service.
  d. click ok to apply the changes.

  For further assistance, please get in touch with the assistance of the Android team.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• HP slate 12 pro: files transferred via a usb port do not appear in the download directory

  I am running windows 8 on an old hp laptop and recently purchased a hp pro slate pro for my partitions.  I plugged my PC using the usb cable.  I created a directory in the download on the slate directory and copied my music files into this directory.   I used to connect to the computer of the PSG.  When you look at the files on the PC, they seem to be in the directory to download on the Tablet, but the download on the Tablet Directory displays no files.  Where are they?  I need help.

  Thanks for your help.  I had downloaded an application called Manager of files, and it's great.  I see all my files.  It can also connect to my pc using the Internet and it is very useful.

• Change hard drives where the files stored, how to ensure that no problems with the catalogue

  I replaced the 3 TB drive (and readers of backup related) who hold all the image files on my Mac Pro with a 5 TB drive.

  The player has only the image on her files. The catalog and previews remain in the folder of images on my main system drive.  I formatted the new drive in an external hard drive enclosure, then used Super Duper to copy the image of the old 3 TB HD files to new hard disk 5 TB. Now, I'm ready to install the new HD 5 to in the computer and the catalog of links to it, but want to make sure you do it correctly.

  This player has 81 000 image files, catalogued in 15 "buckets", each "bucket" with about 15 cases of work, so I obviously want to make sure that I don't have to tie all these files by hand.

  What is the best method to do this, so I have no problem with the catalog know the new location of the files?

  Mac OSX 10.10.5

  Lightroom CC 2015.1

  Thank you!!

  This player has 81 000 image files, catalogued in 15 "buckets", each "bucket" with about 15 cases of work, so I obviously want to make sure that I don't have to tie all these files by hand.

  What is the best method to do this, so I have no problem with the catalog know the new location of the files?

  Instructions are here: Adobe Lightroom - find folders and files moved or missing connect the parent (as shown in Figure 4) folder, and then all subfolders will be also connected. If I understand your use of the word 'bucket' (do you really mean "parent folder"?), then you will need to do this for each of the 15 buckets.

  It would be much easier if you had a 'bucket' or parent folder and many subfolders and sub-sub-folders.