where the voice has entered mobile firefox?

Similar Questions

• Design requirement has evolved, savings where the user has navigated to.

  Continuing this thread: http://supportforums.blackberry.com/t5/Java-Development/Confirming-a-design-where-I-need-to-save-whe...

  Requirements have changed.

  I now need to save the position on the screen where the user has navigated to once the screen has been redesigned.

  Specific screens are relayed on and painted according to a TimerTask. Once the screen again, I must automatically reposition / scroll to the position that the user was on the screen.

  For example:

  1. A user can leave a screen open for ten seconds.
  2. A user scrolls down to 3/4 of the way down.
  3. Once this time is up, a TimerTask is executed and redraws the screen with new data.
  4. If the user did scroll down in a VerticalFieldManager 3/4 of the way down, once the screen is redrawn the user must be back to the same position - 3/4 of the way down in the VerticalFieldManager.

  Ideally, I would like to save the XYPoint and then reposition the screen for the XYPoint recorded - a small prototype needs to be done for my part, granted.

  However, is there a better design or any who has implemented this feature before on OS 5.0.0?

  Thank you.

  I did so with a Manager (s) personalized using the recursively offset of vertical scroll through the stack of Manager as suggested by Peter, but be aware that you must not only parchment of, but the position is within the screen/Manager to follow the actual position of the screen against the perceived one. Here is the code that I use in my manager with my custom functions:

  public final int getAbsoluteY(){
     int absY = (getY()+drawY);
     while( getManager() instanceof CustomLayoutManager ){
        return absY + ((CustomLayoutManager)getManager()).getAbsoluteY();
     }
     return absY;
  }
  

• Where the Authentication passwords stored in Firefox?

  I created a web site that has been set up with a password and I forgot it.
  When you use the URL requires authentication of the field has points so the password must be stored somewhere in Firefox, but where?
  Peter

  You are welcome.

  Firefox uses the same password manager to store all the passwords, for both Web sites and servers (FTP).

  Note that the Web sites to remember you and automatically log you on are stored in a cookie.

• validate if the user has entered at least one element of the page

  The apex Version: Application Express 4.1.0.00.32
  Web browser: Internet Explorer 8
  Oracle DB: 11g Enterprise Edition Release 11.2.0.1.0
  
  Is there a way to validate whether a user has entered at least one item on a form?
  
  I have a function:
  function hasPageValues return a Boolean value
  is
  Boolean v_item_found: = false;
  Start
  
  for rITM in
  (select nom_element
  of apex_application_page_items
  where application_id = Apex_Application.g_flow_id
  and page_id = Apex_Application.g_flow_step_id
  )
  loop
  -the element's value
  If v (rITM.item_name) is not null then
  v_item_found: = true;
  end if;
  end loop;
  
  Return v_item_found;
  end hasPageValues;
  
  I call this function returning a Boolean in my posting of the page. It doesn't seem to work. It always returns false. What am I missing and is there a better way to do this type of validation. Sorry I'm new to APEX. Thank you very much!

  SmV says:
  Also, I added the part output in the above code and it still does not work. Always returns false.

  When you have a problem in the APEX you can use debug mode to trace what actually demand. It is advisable to include the code of instrumentation in your program units that will generate useful debugging information. To do this, use apex_debug_message API:

  create or replace function hasPageValues (
      p_app_id  in pls_integer
    , p_page_id in pls_integer)
    return boolean
  is
    v_item_found boolean := false;
  begin
  
    for rITM in (
      select
                item_name
              , display_as
      from
                apex_application_page_items
      where
                application_id = p_app_id
      and       page_id = p_page_id)
    loop
      apex_debug_message.log_message(rITM.item_name || ' (' || rITM.display_as || '): ' || v(rITM.item_name));
      -- does the item have a value
      if v(rITM.item_name) is not null
      then
        apex_debug_message.log_message(rITM.item_name || ' is not null: exit.');
        v_item_found := true;
        exit;
      end if;
    end loop;
  
    apex_debug_message.log_message('hasPageValues = ' || case when v_item_found then 'TRUE' when not(v_item_found) then 'FALSE' else null end);
  
    return v_item_found;
  
  end hasPageValues;
  

  Without data in the page, this gives the following debug trace:

  ...
  0.19096     0.00084     Perform custom validations:
  0.19180     0.00081     ...Validation "hasPageValues" - Type: FUNC_BODY_RETURNING_BOOLEAN
  0.19261     0.09948     ...Execute Statement: declare function x return boolean is begin return hasPageValues(:app_id, :app_page_id); return null; end; begin wwv_flow.g_boolean := x; end;
  0.29213     0.00144     P6_PRODUCT_IMAGE (File Browse...):
  0.29352     0.00082     P6_IMAGE (Display Only):
  0.29434     0.00075     P6_PRODUCT_ID (Hidden):
  0.29509     0.00105     P6_PRODUCT_NAME (Text Field):
  0.29614     0.00083     P6_PRODUCT_DESCRIPTION (Textarea):
  0.29697     0.00104     P6_CATEGORY (Radio Group):
  0.29801     0.00151     P6_PRODUCT_AVAIL (Radio Group):
  0.29952     0.00079     P6_LIST_PRICE (Number Field):
  0.30030     0.00071     hasPageValues = FALSE
  0.30102     0.00066     ......Did NOT pass
  0.30168     0.00080     Add error onto error stack
  0.30249     0.00079     ...Error data:
  0.30327     0.00299     ......message: Page has no values
  

  While with a set of element values, we get:

  0.07573     0.00107     Perform custom validations:
  0.07680     0.00094     ...Validation "hasPageValues" - Type: FUNC_BODY_RETURNING_BOOLEAN
  0.07774     0.00231     ...Execute Statement: declare function x return boolean is begin return hasPageValues(:app_id, :app_page_id); return null; end; begin wwv_flow.g_boolean := x; end;
  0.08005     0.00105     P6_PRODUCT_IMAGE (File Browse...):
  0.08109     0.00077     P6_IMAGE (Display Only):
  0.08187     0.00094     P6_PRODUCT_ID (Hidden):
  0.08281     0.00074     P6_PRODUCT_NAME (Text Field):
  0.08354     0.00087     P6_PRODUCT_DESCRIPTION (Textarea):
  0.08442     0.00072     P6_CATEGORY (Radio Group):
  0.08514     0.00067     P6_PRODUCT_AVAIL (Radio Group): Y
  0.08581     0.00112     P6_PRODUCT_AVAIL is not null: exit.
  0.08693     0.00076     hasPageValues = TRUE
  

  The two that appear to be the expected behaviours. What happens when you do this?

• The button should be VISIBLE unless the user has entered all of the required fields?

  Hello

  I have 10 fields in the form, 3 are required/mandatory fields to enter the data. And I also kept a button with caption CHECK THE FIELDS.

  I also kept a 2nd button, say legend is GOOD TO GO (this isn't a SUBMIT button, the two buttons are normalbuttons)

  At the point of HRT, GOOD TO GO button is "hidden"

  Now, say, user forgot to enter the 2 required fields and you press the button CHECK THE FIELDS, guest user 2 times with popup legends field of respect.

  Now user entered in 1 field and forgotten again to enter the data in another area and pressed the button CHECK FIELDS, guest user 1 time with a popup with the caption for field of respect.

  Now, the user entered in this field too, very well and CHECK THE FIELDS button, the user has NOT prompted with a popup.

  BUT at this POINT, I need to see THE/PRESENCE button GOOD TO GO

  Please let me know how can they do it in JavaScript?

  Thank you

  In the click event of the button CHECK THE FIELDS, you can check if all three need to fields are filled. Therefore, you can do the "Good to Go" button hidden/visible.

  If (reqField1XPath.rawValue! = null & reqField2Xpath.rawValue! = null & reqField3Xpath.rawValue! = null)

  {

  If all three fields are filled as a visible button

  GoodToGoButtonXpath.presence = "visible";

  }

  on the other

  {

  GoodToGoButtonXpath.presence = 'hidden ';

  }

  Where reqField1XPath, reqField2XPath, reqField3XPath, GoodToGoButtonXpath must be the XPath of the field.

• The button should only VISIBLE if the user has entered all of the required fields?

  Hello

  I have 10 fields in the form, 3 are required/mandatory fields to enter the data. And I also kept a button with caption CHECK THE FIELDS.

  I also kept a 2nd button, say legend is GOOD TO GO (this isn't a SUBMIT button, the two buttons are normalbuttons)

  At the point of HRT, GOOD TO GO button is "hidden"

  Now, say, user forgot to enter the 2 required fields and you press the button CHECK THE FIELDS, guest user 2 times with popup legends field of respect.

  Now user entered in 1 field and forgotten again to enter the data in another area and pressed the button CHECK FIELDS, guest user 1 time with a popup with the caption for field of respect.

  Now, the user entered in this field too, very well and CHECK THE FIELDS button, the user has NOT prompted with a popup.

  BUT at this POINT, I need to see THE/PRESENCE button GOOD TO GO

  Please let me know how can they do it in JavaScript?

  Thank you

  You were absent; After each statement - no need after 'else '. Don't know what you're doing with b? B get used somewhere? Also, I think I've fixed your resolveNode syntax. Give it a try.

  for (var i = 0; i)< myarray.length;="" i++)="">
  If (xfa.resolveNode("VISITORINFO["_+_i_+"]").rawValue == null) {}
  b = xfa.resolveNode ("VISITORINFO [" + i + "]"). caption.value.text.value;
  x = "BAD";

  App.Alert (x);
  }
  on the other
  {
  If (x! = 'BAD') {}
  x = "GOOD";
  App.Alert (x);
  }
  }

  }

  Good luck!

  Stephen

• Why the update muse my pictures not on the server that the client has entered?

  Sorry my English verry bad. When the customer has enterd new photos on the server, muse adobe will not update this new photos.

  I use the latest Version of Adobe Muse. Please can you give me a solution for this problem?

  Philipp,

  Save the file to Muse, Muse and re - open the same file, click on the file-> to synchronize with the Web version:

  

  This should show you that the site updated.

  Kind regards

  Akshay

• Where the RPD has registered in online mode

  I open my deposit online and change it. After my changes, I check in and save it. By checking I saw the saved repository on the Sava (Limux 5). By clicking on save, I believe that the RPD is recorded in the \server\Repository C:\ < OBIEE > on my Windows client. But I'm not and I can't find it anywhere.
  
  Where the RPD saved?

  Hi user623617,

  So that you can save the online version in your system, choose, "file-> copy as" and specify the location on your system where you want to save, as well as the file name.

  Thank you
  Praveen

• How to find the Hello button in mobile firefox?

  I can't find the Hello button in the menu

  Joseph_Alaban said

  I can't find the Hello button in the menu

  Hello Joseph,.
  So far, there is no Hello button in Firefox for Android. However, you can receive link generated from the desktop browser but cannot generate the link on mobile phone.

• Apple made the new version of Adobe Flash, the former has been compromised; Firefox is not compatible with the latest version of Adobe Flash, can you help me?

  The new version of Adobe Flash works in Safari. Apple thought that the old version of Adobe Flash had compromised safety, so Mac users can no longer use the old versions of Adobe Flash. A few settings in Firefox are not letting the update to the latest version of Adobe Flash work.

  New version: 11.6.602.167

  Please see that 11.3 Flash does not load video in Firefox

• How can I prevent people from seeing where the email has passed since?

  How can I stop showing where email is transmitted from

  How can I stop showing where email is transmitted from

  Select and then delete the addresses in the e-mail message.

  And when you send an email if you do not want your visible list of recipients used the bcc function.

  http://ask-Leo.com/how_does_using_bcc_help_reduce_spam.html

• Cannot access files by using Sharepoint where the permission has been set to allow access. Other members of the group are able to access these files.

  Downloaded Sharepoint, working on a group project, but cannot access shared documents.  a lock icon appears to the right of the url of the sp, accredited certificate.

  You need to ask in a forum of Sharepoint.

• Text path effect to distort the free but not moving not path where the effect has been filed. How can I make this possible?

  I am trying to unite the paths, but it changes the text to the way it was before I added the effect of distorting the free

  You cannot apply an effect to a track of text.

  First create the path, can distort, and then expand appearance, then put the text on it.

• Drop table for a user, where the table has special characters.

  I have to delete tables starting with BIN. How can I do? This is Oracle database 11g.
  
  SQL > select * from tab;
  
  TNOM TABTYPE CLUSTERID
  ------------------------------ ------- ----------
  BIN$ 7J51dMFbQ36/jjLPLdzXeg == $0 TABLE
  BIN$ CaCh7QhdRDqlyJo9JETBaA == $0 TABLE
  BIN$ J + 4ibk96QZ + PZCDGGNx8Tw == $0 TABLE
  BIN$ NvnXFcd4QBW4uYMqOu8H6A == $0 TABLE
  BIN$ RaCaPOaTSXyKDlZZG2ua7Q == $0 TABLE
  BIN$ aGKXrnwlQRe + e0IH6tEBPQ == $0 TABLE
  BIN$ fA5I + 2xsQy66mF7koOoYkA == $0 TABLE
  BIN$ lLxLZF3BQ0eum9Ia4rtqYA == $0 TABLE
  BIN$ nKZ5hquHRRWHa9daNsa5XQ == $0 TABLE
  BONUS BOARD
  DEPT TABLE
  
  TNOM TABTYPE CLUSTERID
  ------------------------------ ------- ----------
  EMP TABLE
  SALGRADE TABLE
  
  13 selected lines.
  
  I tried to drop one of them and it gave an error saying that table_name is a special character;
  
  SQL > drop table BIN$ nKZ5hquHRRWHa9daNsa5XQ == $0;
  drop table BIN$ nKZ5hquHRRWHa9daNsa5XQ == $0
  *
  ERROR on line 1:
  ORA-00933: SQL not correctly completed command.
  
  
  Please suggest. Thanks in advance.

  10 g recyclebin default is on, and whenever there is drop table statement it goes to recyclebin. To avoid this fall of the table must be with the keyword to purge as,.
  SQL > drop table t is serving;
  Otherwise, you can change db setting to turn off recyclebin and the object will not go to recyclebin after that. See http://www.orafaq.com/forum/t/72161/2/

  Kind regards
  Julien

• Confirming a design where I need to save where the user navigated to the screen.

  A matter of design, which is a good implementation of the following?

  I need to be able to save the location of the place where the user has scrolled, then when the user:

  1. Changing screens and returns to the previous screen.
  2. The application farm (moves the application at bottom) and opens the app again (move the app in the foreground).

  The user scrolls automatically here where the user was before.

  For example, if I have a VerticalFieldManager with the following text read only fields:

  • LabelField
  • LabelField
  • LabelField
  • LabelField
  • LabelField
  • ButtonField

  The user scroll down to the third LabelField — two actions user above performs, returns to the screen, and scrolls down to the third TextField again.

  Is the hardest part, I can't count on own dirty, muddy, or fields because it is read only the data and a ButtonField.

  I can't use Manager.setFocus because the fields have an accent.

  I think I can use Manager.setHorizontalScroll and Manager.getHorizontalScroll, but is there a better way?

  Not sure that your arguments to change my suggestion.

  "The user must be able to close the application."

  If they close the applciation that they lose their position.  It happens in most of the applications.  Browsers do not open up on top of the page you were viewing when you close, for example.

  "The user must be able to request the application thoroughly using the end key of red color"

  You will not be able to stop this.  It will just happen.  Nothing for you to do.

  "This is a pile of high display a screen where the Menu button is the main navigation.".

  This does not preclude that I proposed either possible.  If you pop a screen and then later push it, my understanding (and experience) are that he's going to be redisplayed as it was when you jump it.  The screens are objects, they don't stop screens just because they aren't on the stack of the screen.

  Also, I see no problem in what you descrtibed for a touchscreen device.