Where to add the transitional attribute at the level of the entities or view level? And where to use {return getTransientAttribute()} in the entity or view?

Similar Questions

• How to add the attribute authorization 4.2 GBA

  Dear experts, ACS,

  I am using 4.2 ACS to authenticate and authorize the GANYMEDE + traffic from the appliance Steelhead of Riverbed WAN Optimizers.  One of the tasks of configuration is to add the attribute authorization following the 4.2 ACS.

  Service = {rbt-exec
  local-user-name = 'monitor '.
  }

  After reviewing all options on ACS configuration, I am at lost.  I don't know where to put this attribute.  Please point me in a good direction.

  Thank you very much!

  Hi Kevin - I can steer you in the right direction-

  1. Go to Configuration of the Interface > GANYMEDE + (Cisco)
  2. Under the terms of new Services, check the option box and type "rtb-exec" to the terms of Service and "Unknown" under the Protocol
  3. Press send
  4. Go to your ACS group and under settings GANYMEDE + it must be a new Service
  5. Fill in service as follows:

  

  This should help some of the way-this article suggests a problem where it won't give you full access, but I have not tested:

  http://community.riverbed.com/T5/Steelhead-appliance/TACACS-authentication-monitor-access/m-p/7417

• Can fill us transitional attribute in the table with no serial like 1,2,3, etc.? And how?

  Mr President.

  Can fill us transitional attribute in the table with no serial like 1,2,3, etc.? And how?

  Concerning

  You want to show serial No. on the page for all the lines?

  Check once-

  Blog of Ashish Awasthi (Jdev/ADF): Add the serial number to the table of the ADF, column to auto-increment in the table to the ADF

  Actually transitional attribute loses its value when page refreshes or viewObject is not appropriate in this case if your use case is different, so please tell us

  Ashish

• Cannot add the attribute Pro-VO again after the creation of VO.

  Hi all

  Earlier during the creation of the VO, I switched a few columns of EO to VO, and they were defined as calculated attributes.

  Now since I had need of a few more added (enabled/disabled) columns of EO, I rocked them but they are created as transient attributes.

  Even if I'm unable to match to the column in the query, if I click on mapped to the column, or SQL, is not applied do.

  Is it possible to add attribute (columns) calculated of EO to VO, so that I can make transactions through them.

  Thank you and best regards,

  Gauthier

  Hi all

  Just tried it after step and succeeded.

  Please follow the steps if you want to have the EO based attribute (when the transitional attribute is be created instead) below.

  Step 1: Add the column to the table in the SQL query.

  Step 2: Turn the column that you want to use in vol. (it can be created as transitional).

  Apply, save and close the J-developer (to avoid unwanted problems)

  Step 3: File Open XML of the VO.

  This is what it looks like when you have transient attribute:

  <>

  Name = "CreatedByUser".

  IsSelected = "false".

  IsPersistent = "false".

  Precision = "255".

  Type = "Java.lang.String"

  ColumnType = "VARCHAR2".

  AliasName = 'CREATED_BY_USER. '

  SQLType = 'VARCHAR' >

  Step 4:

  Change the tags as below:

  <>

  Name = "CreatedByUser".

  EntityAttrName = "CreatedByUser".

  EntityUsage = "XxxxxXEO".

  AliasName = "CREATED_BY_USER" >

  Please note the name, EntityAttrName and Alias name must be identical to that available in OT.

  Step 5:

  Open Jdeveloper and rebuild the project. Open the VO and check to confirm if it had changed and calculated attribute.

  Thank you and best regards,

  Gauthier

• How to add the transient attribute for LOV (object of the view read-only)

  I have a view called CustomerView and attribute DepartmentId is present in it.

  Also exists DepartmentView and CustomerView.DepartmentId has an LOV from this point of view.

  I need to add a transient attribute to CustomerView which express the DepartmentName attribute in the LOV.

  Because of the view are read-only there is no entity object don't match them.

  How can I write the groovy for the transitional object expression.

  The name of the view accessor Lov's DepartmentView1

  Looking for your help. Thank you.

  Hi gcoban

  I do not understand your question correctly,

  you are not able to write to the expression property in viewObject?

  or you want to know how to write groovy for that?

  for writing groovy you need viewAccessor and you who have, you can try as Alejandro Tovar Lanz suggested

  or you can write code in RowImpl to fill in the name of the Ministry of the accessor

  See -https://blogs.oracle.com/adf/entry/combo_lov_how_to_display

  Thank you

• By default, the transitional attribute using sql

  
  Hello

  I use JDeveloper 11.1.2.4.0.

  I need to call a function to populate a transitional attribute.

  I thought I could do the following

  (function_name (PkId)), where PkId is an attribute that is selected in the query of the view object.

  But the result is that the value of the column in the select clause, the following

  Has_Visited_YN (PkId) AS VIEW_ATTR OF LEADSADMIN. LEADS_COMPANY LeadsCompanyEO

  Obviously, with this statement, including the clause, in the list of attributes in the select does not work.

  Any ideas?

  Yes, you can

  1. create transient attribute on the entity object.

  2 select attribute, and then click on the pencil icon to edit the attribute

  3 check the option derived from SQL.

  4. an area of Expression then you write sql like

  (select Has_Visited_YN (PkId) of double)

  and give the full name of the attribute as defined in the query tab view object.

  Name of Alias.Attribute instead of PKid.

  for eg - PayEmphdr.EMPCD

  Manish

• How can I add a transition without eating in the length of the clip.

  I have a newer iMac with iMovie 10.1.2 and OS 10.11.6.  I would like to add transitions, but they eat in the length of each side of the transition of 2.0 seconds.  Is it possible to add transitions without eating in the length of the clip.  In old iMac with the internal CD, before Apple "upgraded" iMovie, you could add transitions without affecting the duration of the clip.  When a large part of my project, composed of clips 6-8 seconds of time, waive the duration of the clip to make a presentation more chic does not seem an option.

  For a transition to build to use incoming and outgoing clip media. We call these handles. It has always been like that. Most people leave a few seconds out of their clips when adding to the timeline. With clips you just save a second at each end, and you can create a second 1 transition or the precision Editor to set the duration of the transition. A point to note is that this does not apply to photos that they automatically of the handles. Your transition that uses 2 seconds of your clips is a second transition 2. If you use the full clip in the timeline and add a transition, iMovie will warn you that it would take the clips to make the transition.

• How can I add a transition to a clip of the image in the image?

  I'm mocking a basic slate of interactive outro YouTube-style and try to add a pure fade at the end of the video. I add a transition to the main video layer, then adjust the handles of fade on the layer of the image in the image:

  

  Unfortunately, I can't get a neat transition. I can't show you the video in question, but it seems that even if the transitions are the same length, the image in the image layer takes longer time to fade.

  Is there another method, I can try to match the transitions?

  They can turn to be of the same duration, but iMovie is not a uniform time scale (there is a minimum width of clip in the panel mounting no matter how short the clip is in fact).  If you have set the same transition times from that it is just a matter of setting how the pip clip extends beyond the main element.

  Geoff.

• where can I find the drivers to add the HP Pavilion photosmart printer

  When I try to add my photosmart c6100 for my new HP Pavilion pc, it is not on the list.  I have the disk but it is not for a 64-bit pc.  where can I find the drivers to add the photosmart printer?

  Hello

  You must select the good BONES of your machine to download drivers and install on your computer:

  http://h20565.www2.HP.com/portal/site/hpsc/public/PSI/setupInstallResults?sp4ts.Oid=1153695&AC.admitted=1396578897581.876444892.492883150

  Kind regards.

• call a stored procedure for each row in the transitional attribute and display the data in the form of af: table. The other rows are based on the entities

  Hi Experts,

  JDeveloper 12.1.3.0.0

  I have a VO based on entity object. With a column of the VO is transient attribute (I created).

  I need to call a stored procedure for each row in the transitional attribute and display the data in the form of af: table. As well as other attributes.

  So can anyone suggest how can I achieve this?

  Thank you

  AR

  I think that you need a stored function (which returns the value) in this case, is not?

  Take a look at:

  https://docs.Oracle.com/CD/B31017_01/Web.1013/b25947/bcadvgen005.htm

  and search for:

  Invoking stored function with only Arguments in

  call your function in the Get attribute and return value accessor...

• How to add a transient attribute of a table values in the new attribute group wise transient that is to say wise customer?

  Mr President.

  How to add a transient attribute of a table values in the new attribute group wise transient that is to say wise customer?

  as below

  

  Concerning

  Hello world

  for an overview in the following form

  

  This is the sql query that reach this format

  SELECT c.name customer_name,
          p.name product_name,
          sl.sal_qty,
          sl.unit_sal_price,
          sl.sal_qty*sl.unit_sal_price AS salesvalue,
          CASE
            WHEN ROW_NUMBER () OVER (partition by c.cust_id order by p.prod_id desc,sl.sal_id desc) = 1 THEN
                SUM (sl.sal_qty*sl.unit_sal_price) OVER (PARTITION BY c.cust_id)
          END totals
  FROM customer c INNER JOIN sales s ON s.cust_id = c.cust_id
  INNER JOIN salesline sl ON sl.sal_id = s.sal_id
  INNER JOIN product p ON p.prod_id = sl.prod_id
  ORDER BY c.cust_id,p.prod_id,sl.sal_id
  

  Cheers and enjoy

  Respect of

• Simple: How do I add the title for af:InputText attribute

  Hi guys,.

  I have a simple question, is it possible to have the title attribute for af:InputText as the value of input field?

  Thank you

  Aerts

  Hi Timo,

  Oracle JDeveloper 11g Release 1 11.1.1.6.0

  If we do a view source of the inputText field, you will see a title attribute get generated when you have a certain value in your area. If the user wants to any other title except for the value, there is no other way except using shortDesc but there is a problem with the help of the attribute "shortDesc" because it shows the note window. At the moment there is no way to add the title with using attribute shortDesc and we cannot use shortDesc because of the notewindow.

  It's a thing that oracle should be corrected in future versions (the ability to add existing or custom html attributes to a tag)

  Thank you

  Aerts

• How to set the order in the table in the ADF for a transitional attribute in the default sort t

  Guys,

  I have a VO with 2 columns, the column is transitional attribute.  In my jsff page, I got an af:table that displays the transition attribute.

  When the page is loaded for the first time, by default, transitional attribute values should be sorted in ascending order. Currently, the displayed values are not sorted. I need to click the sort button to sort the values. I need to change this behavior to sort automatically when the page is displayed for the first time.

  Question: How can I set the command to the table in the ADF for a transitional attribute of default sort?

  Note: I have to pragmatically, I can't use order by clause in my VO for the transitional attribute.

  Help, please.

  Thank you

  Rambaud

  Hi Rambaud,

  You can do the sorting "in memory".

  You can implement it like this:

  Get the VO and make sure that all required lines are extracted from the DB

  ....

  Sort the rows by transient attribute

  myVO.setSortBy ("TransientAttribute");

  read the current query mode

  int oldQueryMode = myVO.getQueryMode ();

  to sort in memory

  myVO.setQueryMode (ViewObject.QUERY_MODE_SCAN_VIEW_ROWS);

  myVO.executeQuery ();

  redefine the query mode on original value (only needed if you want to be able to get new lines of the DB)

  deadlineVO.setQueryMode (oldQueryMode);

  I hope this helps.

  Kind regards

  Linda

• Add the xmltype attribute node

  How can I add an attribute node to xml in an xmltype?
  Say that I

  declare
    t_xml xmltype;
  begin
    t_xml := xmltype( '<x a="1"/>' );
  end;

  How can I manipulate this variable t_xml become

  <x a="1" b="2"/>

  Anton

  Depends on the version.

  Before 11.2.0.3:

  SQL> with t as (  select xmltype('') as t_xml from dual )
    2  select insertchildxml(
    3           t_xml
    4         , '/x'
    5         , '@b'
    6         , '2'
    7         )
    8  from t;
  
  INSERTCHILDXML(T_XML,'/X','@B'
  --------------------------------------------------------------------------------
  
   
  

  On 11.2.0.3, by using XQuery Update:

  select /*+ no_xml_query_rewrite */
         xmlquery(
          'copy $d := .
           modify ( insert node attribute b {$val} into $d/x )
           return $d'
          passing t_xml
                , '2' as "val"
          returning content
         )
  into t_xml
  from dual
  ;
  

  (not tested, but should be close)

  Marco Gralike wrote:
  You should be able to build up the little together 'back' in a dynamic method, but for now, don't ask me how (mark)?

  The generic approach would require market the entire tree down recursively to the copy existing nodes and add the new in the right place.
  Although XQuery (without involving XQUF) can do it, it's more of a task for XSLT:

  SQL> with t as (  select xmltype('') as t_xml from dual )
    2  select xmltransform(
    3           t_xml
    4         , xmlparse(document
    5  '
    6    
    7    
    8    
    9      
   10        
   11      
   12    
   13    
   14      
   15        
   16      
   17    
   18  '
   19           )
   20         , q'{att="'2'"}'
   21         )
   22  from t;
  
  XMLTRANSFORM(T_XML,XMLPARSE(DO
  --------------------------------------------------------------------------------
  
  
   
  

• How can I add a transition between each item in the items 11 first?

  Greetings-

  Folks, I'm looking for a feature that even the old Windows Movie Maker used to have cheese.  I'm trying to figure out how to get first elements 11 to add a transition between each clip, by any means of quick shortcut.  I think it's rude and unhelpful that I need to manually drag a transition between each element.  If I import 200 short films that I took with my point and shoot camera, it'll take me more than one hour alone just to put transitions in place.

  Is it possible to select a transition and have Premiere Elements add it between each clip?  I have stumbled upon the fact that you can click on a transition and make the "Default", but were not able to understand what this does for me.

  Any help is appreciated.

  Thank you.

  Andy

  As I showed you in my book, you can select all the clips you want a transition between, right-click on the group, and select apply the default Transition, and it will be applied between all the clamps.

  You can define a transition to the default by right clicking on it in the Panel of Transitions.