Where to configure the SCAN address?

Similar Questions

• Try to configure the scan to the network folder, name of user and password is incorrect about JO 8600 N911n

  Hello - I have an Officejet 8600 N911n, product number CN577A. My OS is 64-bit, Win8

  My error message is either your user name or password is incorrect, please go back and correct your user name or password.

  No changes were made because this system has a few months other than downloads.

  I tried using the username provided by the scan to network folder setup with the IPL used for the HP forum and support. Also, I deleted the user name provided by the scan to network configuration folder and created a new pw. They have also objected. What user name and pw should be used?

  Hi Wardell1,

  I appreciate that you try to configure the scan to network folder.

  Where do you get this error message?

  Do you get this error message when you try to access SAP of the printer?

  You get this message on the printer?

• I have hp elitebook 8440p, I inserted the sim card, but I'm not able to see where to configure the sim card

  Hi I have a hp elitebook 8440p but I did not; KWN how to use sim card option, I inserted the sim card, but now I can't see wher to configure the sim card or use, cos I m unable to see any option, so please help me

  Hello

  The HP EliteBook User guide contains information on what is required to configure the module top mobile broadband in your mobile workstation. Go to the HP Web site for more information about the configuration and activation of the SIM card.

• Where can I find the options to configure the IP address, gateway, DNS and network mask for my ethernet connection?

  original title: Ethernet configuration

  How/where can I find blue page that displays: IP address, gateway, subnet mask, DNS

  Hi Dr. Pasquale,

  ·         Are what blue page you referring?

  If you need to find the IP address of your computer you can use the prompt to to do. You have ti use the ipconfig command to get the details.

  a. Click Start, click Run.

  b. type cmd and press ENTER.

  c. type ipconfig and press ENTER.

  See the following articles for more information.

  Microsoft Windows XP: Ipconfig

  The syntax and Options for using the Ipconfig Diagnostic Utility for network connections

  If this isn't what you're looking for then respond with more information so we can help you best.

• Where to find the MAC address on a HP Deskjet F4580 wireless

  I inherited a HP Deskjet F4580 wireless capable. I tried installet to my wireless network; but my network in addition to WEP security also uses MAC address filtering. Where and how can I determine any address of the printer? There is no label or similar bodies with the number in this printer.

  Using Win XP Pro SP3. Any help will be much appreciated

  Hello

  Print a Network Setup page by following the steps below:

  1. Make sure that plain white paper is loaded in the product.

  2. On the control panel of the HP product, press and hold the Scan button ( ) for two seconds.

     The product prints the configuration page.

• Configure the IP address for PowerConnect 2724 on existing network

  I tried access the switch using the default IP 192.168.2.1 and can't find it.

  I was literally out of available ports before the purchase/installation of the 2724.

  Our network is 192.168.0.x with a subnet of 255.255.255.0.

  Currently, the managed Mode light is turned off.

  I can access the network/web prior to the switch.

  Can someone tell me where I am / have gone bad?

  How to configure the switch before adding it to the existing network?

  Switches used:

  Reference Dell 2024, 2608, 2724

  NETGEAR FS516

  Thanks in advance.

  
  

• How to configure the scan of the computer.

  HP3510 desktop on MacBookPro

  Need help to set up the scan feature to scan to computer

  Did you download the drivers and software ADJUSTMENT INTEGRAL? If this is not the case, here is a link that will help you to download.
  http://goo.GL/BVOOg

  If you have already downloaded the full software features, open your printer on the computer. Double-click the icon, if its on the desktop, or open the solution Center.

• How to configure the IP address on VMWare ESXi 3.5

  Hi all.  I installed the VMWare ESXi 3.5 on a test to dedicate

  Server, assign a private IP = 10.10.1.10 to the VMWare box (this box has 2 physical NETWORK card); and then I

  installed the Symantec BrightMail 9.0.2 as a virtual appliance on VMWare ESXi

  3.5 to act as an e-mail gateway.  BrightMail installation goes smooth.  However, I am not in a position

  to connect to the Internet inside BrightMail 9.  I have installed BrightMail for

  have 2 virtual network card.  Network 1 (eth0) got the IP =

  10.10.1.11, network 2 (eth1) got the IP = 82.132.33.45 (real

  public IP address).  With this settig BrightMail virtual machine is able to talk with the other PC in my LAN, howerver, it can't go on the Internet.  My network configuration is as follows:

  A router (Modem, with the public IP address) is directly connected to the VMware computer (the first NETWORK adapter), and then the VMWare (second NETWORK card) connects to a switch where other LAN PC also connects to.

  My question is,

  1. from BrightMail runs on top of the

  VMWare, how can I BrightMail to connect to the Internet and to the

  Moreover, it connects to my LAN?  Currently the machine has VMWare a

  10.10.1.10 private IP assigned address.

  I'm a bit confuse about the settings of the network on the VMWare itself (I'm not the network

  Guy).  Any suggestion is weclomed.  Thank you.

  the observed range, vmnic0 resembles your DMZ LAN and vmnic1 is your LAN (172.x.x.x) you can check you have the right cable to the correct port?

  then you are supposed not combined two NICs in a single portgroup. you will need to do vmnic0 as a new vswitch with new portgroup named DMZ Lan and change that in the virtual network adapter machine virtual 2 to use the DMZ LAN as the virtual switch.

  iDLE-jAM | SC 2, SC 3 & VCP 4

  If you have found this device or any other answer useful please consider useful or correct buttons using attribute points

• Where are located the scans?

  I just finished installing my new J6480 HP printer all in one wireless.  I used the base printer and scan drivers only, not the suite complete.

  I can access the webscan by visiting the IP directly via my web browser... I can see the preview scan very well... But when I hit SCAN, I don't know where's the pic.

  I checked all the famous places... MY DOCUMENTS, MY PICTURES, HP, etc... but no luck!

  Can I download the complete HP software to make it work?

  If you know what you scanned as... (.jpg, .bmp, .tiff) do a search for this *.jpg format or * .tiff.

  The character generic star will find all files with this extension on your computer.

• Where is located the Contacts/address book template file?

  My custom template of Contacts was damaged. Where is the template located in OS X Yosemite file? I would like to try and restore from a backup.

  Use the Finder > go > go to folder copy and paste:

  ~/Library/application support/AddressBook

• ANALYZE the Configuring the listener

  Hello
  
  Im trying to create the emca for my rac db repository but his failling with this error... Invalid username/password or the data/analysis not high listener or database service is not registered with listener to scan.
  
  
  EMCA - config dbcontrol db-rest create - cluster
  
  EMCA STARTED may 3, 2010 12:44:27
  Configuration MS Assistant, Production of the Version 11.2.0.0.2
  Copyright (c) 2003, 2005, Oracle. All rights reserved.
  
  Enter the following information:
  Unique name of database: test
  Service name: test.domain.com
  Listener port number: 1529
  Listener ORACLE_HOME [/ u01/app/grid01]:
  User SYS password:
  User DBSNMP password:
  SYSMAN user password:
  Name of the cluster: test-cluster
  E-mail address for notifications (optional):
  Server of Mail (SMTP) out for notifications (optional):
  ASM ORACLE_HOME [/ u01/app/grid01]:
  ASM port [1529]:
  ASM username [ASMSNMP]:
  ASM user password:
  Invalid username/password or the data/analysis not high listener or database service is not registered with listener to scan.
  
  status of the listener:
  
  
  ------------------------
  Alias LISTENER
  Version TNSLSNR for Linux: Version 11.2.0.1.0 - Production
  Beginning of May 3, 2010 12:22:32
  Uptime 0 days 1 hour 35 min 17 s
  Draw level off
  Security ON: OS Local Authentication
  SNMP OFF
  Parameter Listener of the /u01/app/grid01/network/admin/listener.ora file
  The listener log file /U01/app/grid01/diag/tnslsnr/Node1/listener/alert/log.XML
  Summary of endpoints listening...
  (DESCRIPTION = (ADDRESS = (PROTOCOL = ipc) (KEY = LISTENER)))
  (DESCRIPTION = (ADDRESS = (PROTOCOL = tcp (PORT = 1527))(HOST=127.0.0.1)))
  (DESCRIPTION = (ADDRESS = (PROTOCOL = tcp (PORT = 1529))(HOST=132.17.186.21)))
  Summary of services...
  Service '+ ASM' a 1 instance (s).
  Instance '+ ASM1' READY State, has 1 operation for this service...
  Service 'test' has 1 instance (s).
  Instance "testa", status UNKNOWN, has 1 operation for this service...
  Service 'PLSExtProc' has 1 instance (s).
  Instance of 'PLSExtProc', status UNKNOWN, has 1 operation for this service...
  The command completed successfully
  
  listener to Scan:
  
  LSNRCTL for Linux: Version 11.2.0.1.0 - Production on May 3, 2010 13:59:29
  
  Copyright (c) 1991, 2009, Oracle. All rights reserved.
  
  Connection to (DESCRIPTION = (ADDRESS = (PROTOCOL = IPC) (KEY = LISTENER_SCAN1)))
  STATUS of the LISTENER
  ------------------------
  Alias listener_scan1
  Version TNSLSNR for Linux: Version 11.2.0.1.0 - Production
  Beginning of May 3, 2010 12:20:48
  Uptime 0 days 1 hour 38 min 41 s
  Draw level off
  Security ON: OS Local Authentication
  SNMP OFF
  Parameter Listener of the /u01/app/grid01/network/admin/listener.ora file
  The listener log file /U01/app/grid01/diag/tnslsnr/Node1/listener_scan1/alert/log.XML
  Summary of endpoints listening...
  (DESCRIPTION = (ADDRESS = (PROTOCOL = ipc) (KEY = LISTENER_SCAN1)))
  (DESCRIPTION = (ADDRESS = (PROTOCOL = tcp (PORT = 1529))(HOST=132.17.186.29)))
  Summary of services...
  Service 'test.domain.com' has 1 instance (s).
  Instance "testa", State LOAN, has 1 operation for this service...
  Service 'testXDB.domain.com' has 1 instance (s).
  Instance "testa", State LOAN, has 1 operation for this service...
  The command completed successfully
  
  
  I can connect to the db through scan (only using the testxdb.domain.com and not the test.domain.com).
  
  sqlplus sys / as sysdba pass@test-cluster-scan:1529/testxdb.domain.com (this works)
  
  but this one fails
  
  sqlplus sys / as sysdba pass@test-cluster-scan:1529/test.domain.com (this works)
  
  
  SQL * more: Production version 11.2.0.1.0 on Mon May 3 14:03:51 2010
  
  Copyright (c) 1982, 2009, Oracle. All rights reserved.
  
  ERROR:
  ORA-12516: TNS:listener could not find Manager available with the corresponding protocol
  battery
  
  
  Enter the user name:

  Please read:

  question of access scan 11 GR 2

  Where to configure the SCAN address?

  Concerning
  Rajesh

• Configure the module of firepower ASA IP address

  Hello

  today I tried to configure the IP address of the late ASA power module. But unfortunately I failed. The firewall is in the direction of the situation and also do have not any router on the LAN. So, I stop the management interface and configure the IP of firepower on the network server management. But unfortunately I can not ping the gateway IP address that is actually one of the interface of the firewall. It is the series x 5525 firewall. So this isn't a any interface dedicated to management of firepower. It would be nice to know where I made the mistake? I recharge and recovery of the module and I consider the State as always state of recovery. So my question is looking for there is a problem with the module itself?

  Module status

  SH module

  Model serial number of map mod
  ---- -------------------------------------------- ------------------ -----------
  0 ASA 5525 - X with SW, GE, 1 GE Mgmt, AC 8 data
  IPS unknown n/a
  cxsc unknown n/a
  SFR unknown n/a

  MAC mod Fw Sw Version Version Version Hw address range
  ---- --------------------------------- ------------ ------------ ---------------
  0 f  1.0                                                2.1(9)8      9.2(3)
  ips                                                         N/A          N/A
  cxsc                                                       N/A          N/A
  sfr                                                         N/A          N/A

  The Application name of the SSM status Version of the Application of SSM mod
  ---- ------------------------------ ---------------- --------------------------
  IPS unknown current Image number does not apply
  cxsc unknown No. current Image does not apply

  Data on the State of mod aircraft compatibility status
  ---- ------------------ --------------------- -------------
  0 to Sys does not apply
  IPS does not is not Applicable
  cxsc does not not Applicable
  SFR recover not Applicable

  Config firewall Interface

  #Interface IP-Address OK? Method State Protocol
  GigabitEthernet0/0 10.101.106.115 YES CONFIG upward upwards
  GigabitEthernet0/1 10.106.106.115 YES CONFIG upward upwards
  GigabitEthernet0/2 10.103.254.254 YES CONFIG upward upwards
  GigabitEthernet0/3 10.0.210.254 YES CONFIG upward upwards
  GigabitEthernet0/4 10.100.254.254 YES CONFIG upward upwards
  GigabitEthernet0/5 10.107.253.115 YES CONFIG upward upwards

  #interface GigabitEthernet0/1
  Speed 1000
  full duplex
  nameif Server
  security-level 70
  IP 10.106.106.115 255.255.0.0

  Fire power management configuration

  Host name: 1 Swiss francs
  Configuration Management Interface

  Configuration IPv4: static
  IP address: 10.106.251.253
  Network mask: 255.255.0.0
  Gateway: 10.106.106.115

  IPv6 configuration: Stateless autoconfiguration

  Configuration of DNS:
  Domain: XXX.local
  Search:
  XXX.local
  DNS server:
  10.101.251.2
  10.201.251.2

  Any help will be greatly appreciated.

  Thank you

  Sari

  Sari,

  Even if there is not a physical module services fire power management port, it uses Management0/0 port to connect to the module of SFR.  If you like on the same VLAN as your server VLAN on the SAA plug Management0/0 port on a switch that is sharing the network server VLAN and give the module SFR an IP address on the same subnet.

  Make sure that you remove the statement under interface Management0/0 nameif. Here is an example:

  interface Management0/0
  management only
  No nameif
  security-level 100
  no ip address

• Unable to configure the address IP 8184 PXI

  Hello

  I can not configure the IP address of a PXI 1031 with a controller 8184. I followed all the steps in the manuals to help but after that assignment of an IP address, when I restart the controller the following message is displayed:

  mounting: mounting/dev/hda1 on/home/ftp/c failed: invalid argument

  Enter safe mode

  The 0.0.0.0 IP address

  The hard drive has two WinXP and LabView real-time installed, but the second switch of hardware on the 8184 is enabled, then the controller boots with LabView RT in Mode without failure (as indicated on page 2-13 of the PXI-8184 user manual)

  Does anyone know how to fix this?

  Thanks in advance

  Hello Casey,.

  Apparently, the issue is resolved. I formatted the hard drive of the PXI-8184 (with the FAT file format) and after reboot, I was able to 'paste' an IP address. Subsequently, I installed all the software of motion, that I need and in real time of NEITHER.

  Yes, PXI was ordered with dual boot. It is amazing that NEITHER offer the dual boot with a file system that does not allow for dual boot! Moreover, as I could see, there is not a single line on the manual in the PXI-8184 allerting or help files to this problem! This should be corrected... I spent a week trying to fix this! If it wasn't for your help, I always don't seek an answer.

  Thank you once again,

  João

• Cannot configure the static IP address for Cisco Touch 8 "

  Hi all

  I found that I can not configure the static IP address for Cisco Touch on TC7.0.1 / 7.0.2 with the procedure described below.

  1. upgrade a codec (e.g. SX20 TC6.3 or less) and a touch paired with the codec for TC7.0.2.

  2. after the upgrade, désapparier (with the help of désapparier Touch button) touch and it reboot.

  3. tap on "IP settings."

  4. Select "Manual IP allocation".

  5. Enter the IP address, subnet mask, default gateway, and then press "Save".

  Even though we have configured the static IP address with the above procedure, IP allocation remains 'Auto' (= DHCP) and the IP address, subnet mask, default gateway is also empty.

  In this situation, the only way to configure the IP address for the Touch is to use the DHCP server.

  I guess many users uses the static IP assignment like us, so please fix it as soon as POSSIBLE.

  Best regards

  Kotaro Hashimoto

  Hi Kotaro,

  It is a known problem in TC7.0.1 and TC7.0.2. The id of the bug is CSCum82147.

  To work around the problem, set IP address you want the button before moving on to TC7.0.x.

  The bug has been fixed and will be included in the next version of the TC software.

  Kind regards

  Jonas Tysso

• Configuration of the IP address failed NIC a VM

  Hello

  I use the following line in my script to configure a static IP address for multiple VMs to csv:

  «Invoke VMScript - VM $VM.name ScriptText-' netsh interface ipv4 set address "Ethernet0" static $vmip $sub $gw' - GuestUser $GuestUser - GuestPassword $GuestPass»»

  The command works for a long time to map NETWORK is actually called "Ethernet0."   In order to operate whenever I need to rename the NIC in my models as Ethernet0.  I wonder if I can create a more secure solution that doesn't require you to change the VM Templates I deploy from fire.

  I can do the following situations?

  Option #1 before running the command netsh run another command that renames the adapter of whatever it was originally (example, area 1, area Network2, etc.)

  Option #2 before running the netsh command Add a new adapter called Ethernet0, configure the IP address on the new card using the netsh command, release the IP address on the original adapter, and then remove the original virtual machine adapter.

  Alternatives best I think not?

  You can use the Get-VMGuestNetworkInterface cmdlet to retrieve the networkinterface and Set-VMGuestNetworkInterface to change the IP address, for example:

  $vmGuestNetworkInterface = get-VMGuestNetworkInterface - VM $vm - GuestUser pass2 user - GuestPassword

  Game-VMGuestNetworkInterface - VMGuestNetworkInterface $vmGuestNetworkInterface - GuestUser pass2 user - GuestPassword - IP 10.23.112.58