Which allows more Ram on my PC with Windows 7 32 bit...

Similar Questions

• HP 650 with 4 GB of Ram can be used with Windows 7 32 bit installed showing 929 MB

  Hello Admins, please I have a 650 Hp Notebook PC with 4 GB of Ram installed but its usable MB 929 display are the following details of my PC.

  Graphics card: Intel HD Graphics 3000

  Chip type: Intel(r) HD Graphics Family

  Amount of video memory available: 272 MB

  Dedicated video memory: 64 MB

  Video memory: 0 MB

  Shared video memory: 208MB

  Please help solve this problem, this article is somewhat like linked to a correction of a problem on the support on this link Center

  http://h20565.www2.HP.com/portal/site/hpsc/template.page/public/KB/docDisplay/?sp4ts.Oid=5296216&SPF...

  Thank you and waiting for your urgent response.

  Kind regards.

  Hello

  With respect to the link below, this problem is reported to have been fixed by the version of the Bios F.36 of bios (see revision history) - updates are cumulative, so you should be able just to Flash the latest version (F.39).

  http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5225013&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_135015_1%257CswEnvOID%253D4061%257CitemLocale%253D%257CswLang%253D%257Cmode%253D5%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

  Kind regards

  DP - K

• Is it normal that H.264 files generated on a computer with Windows 7 64 bit not allow playback on a computer with 32-bit Windows?

  I copied the raw images of a concert shot on a Sony HDR-SR11E (i.e., small domestic video camera) to my computer (Windows 7 64-bit) to a USB key. The files cannot be copied to another computer with Windows XP 32-bit. Is this normal? Is it possible to copy images into another format without losing too much quality so that it reproduces the old computer?

  32 - bit should not make a difference in this case. The computer probably missing a codec or the necessary software to read the file. The camera format is AVCHD, not very exotic, but may be more recent than the media player on the PC. Try to install something like VLC player on it.

• Installation Failed for HP Laserjet 1200 Series in the new computer laptop with Windows 8, 64-bit

  Name of the product - HP Laserjet 1200 Series PCL 6 Driver

  Operating system: Windows 8 Home Edition, 64-bit

  Error message: cannot find the series 1200 on the network. To locate manually click ok...

  Changes Made - this is an installation on the new laptop, in Windows 8, 64-bit

  Description:

  1 installation of an existing network, consistedof a desk and two wireless laptops.

  2. the two portable computers have Windows 7, 64 bit. Above the named printer is accessed successfully for laptops.

  3 replaces one of cell phones with 8 64-bit Windows.

  4. the path of the 1200 series is: wireless printer to the router, router to the desktop via ethernet, from desktop to a printer via a cable.

  5. the configuration of the wireless printer is

  Name: HP Laserjet 1200 Series PCL 5

  Port: \\Central\HPLaserj

  Printer: HP Laserjet 1200 Series PCL 5

  Driver: HPMCPM25. GPD 5.8.2008

  Problem

  Impossible to re-create this path with Windows 8, 64-bit configuration.

  a. when I try to download a driver always end up with a file called UPD-pcl6 - x 64 - 5.6.0.14430

  This seems to be a universal PCL 6 printer driver, can successfully decompress the file and create a folder

  b. during installation, I can see the desktop ICON printer (name: \\central\HPLaserj); So far so good

  c. process is unable to locate a driver and ordered to locate manually.

  d. accessing the HP Universal Driver files fails because a driver is not found.

  e. caraa attempt enter fails because you can't enter address above (\\central\HPlaserj). Cannot enter HPLaserj for the address, which obviously does not work.

  f. when the installation showed a list of drivers, the only one that I found was a universal PCL 6, which is what I thought, I tried to download the original.

  This set up has worked successfully to Windows 7 64 bit. It seems that I need help much more expertise to guide me through this whole upward.

  Problem solved.

  This link gives a good overview of the solution

  http://www.sadjad.net/blog/2012/11/28/Windows-8-shared-printer-driver/

• Incompatibility of printer Epson LQ-680 with Windows 7, 64-bit operating system

  Incompatibility of the printer Epson LQ-680

  I got a new machine (with Windows 7, 64-bit operating system).

  Earlier I had been using an Epson LQ-680 with a serial cable.

  The new machine has a USB port, so I have to use a USB to PS/2 port.

  I installed the Energon USB but still cannot print.

  Incompatibility of the printer Epson LQ-680

  I got a new machine (with Windows 7, 64-bit operating system).

  Earlier I had been using an Epson LQ-680 with a serial cable.

  The new machine has a USB port, so I have to use a USB to PS/2 port.

  I installed the Energon USB but still cannot print.

  I read your post with a lot of attention. There seems to be some confusion on your part. I want to arrempt in order to clarify the information so that a good solution might be found for your needs.

  The Epson LQ-680 is a matrix printer with a print head 24 pins. It is designed to use a parallel port. This means that its computer interface conforms to the IEEE 1284 specification. This is often referred to as a Centronics parallel port. Series No.

  http://www.Epson.com/cgi-bin/store/support/supDetail.jsp?BV_UseBVCookie=Yes&OID=14331&infoType=overview

  Thus, because your computer does not have a port for a direct connection, you must use a parallel to USB device.

  Not all of these devices are supported printers. Please check the specifications of the device that you use to connect your USB printer and confirm that it supports the printers. It is preferable that it supports bidirectional printing through the device. If it is not the case, getting the arrangements put in place for this printer could be a problem.

  Driver for printer:

  http://www.Epson.com/cgi-bin/store/support/supDetail.jsp?BV_UseBVCookie=Yes&OID=14331&prodoid=61441&infoType=downloads&detected=Yes&platform=OSF_W_7-64

  =================

  You did not mention whether your machine is a laptop or computer desk/workstration. If the latter, and if she will allow to install PCI cards or PCI-E, install a parallel port card would work more simply.

  If you want other help, please let us know the make and model of the parallel to USB device.

• Problem installing flash player 11.0.1.152 with Windows Vista 64-Bit

  Hello

  I can't get Flash Player to install on my computer with Windows Vista 64-Bit - is not serious if I try with Firefox, Opera or IE (usually, I use Firefox).

  The download is not a problem, but when I run the .exe downloaded, the file disappears from my download folder and nothing happens - not to mention that the launch of a process called install_flashplayer11x32_mssd_aih_3.exe, which does nothing. The usual installation popup never appears. After that I can not try to start the installation again, until the deactivation of the process via the Task Manager ("that one instance of this application can run"). No matter if I try the download and installation with or without 'McAffe security more' btw - same result.

  I have never had such a problem before - Flash Player 10.3 has been and no problem to install and use.

  I tried all the measures proposed in the troubleshooting section on the official website, including measures for advanced troubleshooting (uninstall the old version, run as administrator, disable the software firewall, disable antivirus, etc.). Nothing helps.

  I have never had these problems with my laptop running Windows 7 - just my desktop computer with Vista 64-bit.

  Any help would be greatly appreciated.

  Try to use installers of links in http://forums.adobe.com/thread/909550

  PS subject moved to the Installation section of the forum.

• HP pavilion dv6-1030us with windows vista 64 bit have now upgraded to windows7 32 bit.

  HP pavilion dv6-1030us originally with windows vista 64 bit have now upgraded to windows7 32 bit. MIC is unable to send sound in Skype after upgradation.

  Hello

  Try the following.

  First, uninstall Skype and when it is finished, restart the laptop.

  When windows has reloaded, download and reinstall the Chipset driver here.

  Once the installation is complete, restart the laptop.

  Let windows load completely, then download the installer of IDT Audio on the link below and save it in your downloads folder.

  http://ftp.HP.com/pub/SoftPaq/sp45001-45500/sp45044.exe

  One time finished, open windows control panel, open Device Manager and open sound, video and game controllers.  Right click on the IDT device and select uninstall - also, you should get a command prompt to delete the current driver, check the box allow this and then proceed to uninstall.

  When you're done, shut down the laptop, unplug the AC adapter and then remove the battery.  Press and hold the Power button for 30 seconds.  Reinsert the battery, connect the power adapter and start Notepad.

  Let Windows load fully, then open your download folder, right-click on the IDT Installer and select "Run as Administrator" to launch the installation.  When this has completed, restart the computer again.

  Reinstall Skype and see if the MIC now works Ok.

  Kind regards

  DP - K

• LaserJet p2015 is not compatible with Windows Vista 64-bit

  I just got a new computer with Windows Vista 64-bit operating system.  I tried to connect my HP Laserjet P2015 printer, but it was not recognized.  In addition, the computer does not recognize the CD supplied with the printer.  Download the necessary software on this site?  I can't seem to find it on mine, and I am a novice when it comes to computers.  Any help out there?  see you soon

  Go to Support & drivers above.  Click on drivers.  Enter the model number of your printer.  A list of drivers should appear.  IF Windows Vista 64 bit is listed, click on that and you should be on your way.  BUT be aware that not all older printers are compatible with Windows Vista 64-bit.  I have a HP Scanjet 4470c which is not compatible with Windows Vista 64 bit on my new HP computer.  So I have a HP Scanner perfectly although I can't use and this Scanner is not that old.  Good luck!

• Printer still prints nothing or only partial pages with Windows 7 64 bit

  I have a laptop HP with Windows 7, 64-bit four months and I am currently on my THIRD new printer.  When I send a print job to the printer, the printer lights up and prepares to print, and then print anything at all or part of a page and then gives me an error message and cancels the job.  This happened to start with a new HP printer, so I took it and got a new Lexmark printer.  When the same problem happened with the Lexmark, I brought back and now have a brand new Epson.  All three printers have had the same problem.  With the last two, I have tried everything - unplug the printer, the print queue, compensation uninstall, and then reinstall the software, ensuring that programs have been allowed on the Windows Firewall, temporarily disable AVG etc.  A recent post, I found said that to change the print of 'Print immediately' settings to "Printing after last Page is wound" (or something like that) helped, but I tried and it did not help me.  I did a lot of research on Google and it seems to be a persistant problem with Windows 7.  Admittedly, I found that it is not a problem with my printer.  Help, please.  I am a student who is very desperate to print and do not know what else to do...

  Hi Lady Justice.

  I suggest to test your profile for corruption:

  http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile

  Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• How can I reinstall the Windows Media Center Gadget on my PC with Windows 7, 64-bit?

  How can I reinstall the Windows Media Center Gadget on my PC with Windows 7, 64-bit?  I had left it one day and now I don't know where he is. I went into the control panel and tried to 'Restore the Gadget', but he said it was not something to restore. I don't know how to get the file from one account to another, if that's what I'm supposed to do. I just want to know how to get the original back that came when I downloaded Media Center for the first time (that I tried to do it again. "But it did not help at all).

  Thank you.

  It's actually pretty easy if you are in the control panel for programs

  Control Panel - programs-

  There is an element under the gadgets 'restore the desktop gadgets installed with windows' which includes Media Center gadget

• Installed Windows 7 64 bit - 4 GB / 3 GB usable, whereas with Windows Vista 64-bit - 4 GB usable

  Hello
  I have the Asus N70SV B1.

  Specifications: (http://www.asus.com/Notebooks/Multimedia_Entertainment/N70Sv/#specifications)

  No problems with Windows Vista 64 bit, recognizing the 4 GB of RAM. After the upgrade to Windows 7 64-bit 4 GB installed / usable RAM problem / 3 gb. I also checked the following.

  1. I am running windows 7 64 bit, NOT 32 bit, I wouldn't be able to run Adobe After Effects® CS5.5 and Adobe first® Pro CS5.5 elsewise.
  2. the unusable 1 GB of RAM is not used by the operating system, it's hardware reserved
  3. the video card Nvidia GT 130 m 1 GB, shouldn't need that RAM - it certainly didn't on the factory installed Windows he dedicated RAM.
  4. I tried disabling and enabling msconfig - boot - Max memory settings, no option solves the problem.
  5. He has no option of memory in the BIOS settings to disable the cache in memory / memory the occultation.

  * I had to use the 64-bit of Windows Vista sound drivers work correctly with Windows 7 64 bit. So I thought that the version of bios or Vista 64 bit can thus solve the problem usable 4 / 3 gb.

  * Yes, I have flashed the bios to Windows Vista 64-bit and that still does not solve the problem. Although the system seems faster, it still shows only 3 GB usable.

  There should not be a problem with this bios version seen only with the 64 bit Vista OS recognized all 4 GB.  I am confused and have no idea where to go from here.

  Please help.

  Hello

   
  I suggest you to contact the manufacturer of the computer for help.
   
  Thank you!

• Random freezes with windows 7-32 bit

  Previously, it was Random freezes with windows 7-64 bit and now random freezes with windows 7-32 bit it is very amazing that I have installed windows 7 32 bit, it's back to w7 w8 to be comfortable using O.E.M

  Concerning

  Hello

  Thanks for posting in the Microsoft Community.

  You can read these articles and check if that helps.

  Windows hangs or freezes: http://support.microsoft.com/kb/2681286?wa=wsignin1.0#method5

  Warning: him reset Internet Explorer settings feature might reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings.

  Warning of Security Scanner: there could be a loss of data while performing an analysis using the Microsoft safety scanner to eliminate viruses as appropriate.

  Optimize Windows 7 for better performance: http://windows.microsoft.com/en-IN/windows7/Optimize-Windows-7-for-better-performance

  Note: you should not disable Windows Firewall, unless you have another firewall is activated. Turning off Windows Firewall may make your computer (and your network, if you have one) more vulnerable to damage caused by worms or hackers.

  Warning of Security Scanner: there could be a loss of data while performing an analysis using the Microsoft safety scanner to eliminate viruses as appropriate.

  Feel free to post your request here on the Forums of Windows, we would be happy to help you.

• I have baught a new portable computer and you want to install windows vista (32-bit) on a bootable partition that it will be possible to do it with windows 7 (64-bit)

  I have baught a new portable computer and you want to install windows vista (32-bit) on a bootable partition that it will be possible to do it with windows 7 (64-bit)

  the laptop contained Home Basic windows 7 (64-bit) and I want to install windows vista Home premium (32 bit) on a bootable partition that it will be possible to do or tell me the parallel method to move a certain 32-bit operating system...

  I do not understand your question. If the laptop can run Windows Vista, it can probably run Windows 7 too.

  To run Windows 7 64-bit, the processor must be a minimum Core 2 Duo.

  System requirements:

  * 1 gigahertz (GHz) or faster 32-bit (x 86) or 64-bit (x 64) processor

  * 1 gigabyte (GB) of RAM (32-bit) or 2 GB RAM (64-bit)

  * 16 GB of disk space available (32-bit) or 20 GB (64-bit)

  * Peripheral figure DirectX 9 with WDDM 1.0 or higher driver

• What version of developer costume oracle is compatible with windows 7 32 bit

  Can you get it someone please let me know what version of Oracle Developer suite is compatible with windows 7(32 bit). And please tell me the link where I can download this. I want to download this software to make the practices of Oracle Forms and reports by installing it on my PC.
  
  I had downloaded ds_windows_x86_101202_disk1.zip from the site of the Oracle, but during the installation it show the error msg in the newspaper as -
  
  ParamFile using: C:\Users\USER\AppData\Local\Temp\install\install\oraparam.ini
  
  
  Checking Installer requirements...
  
  Checking the operating system version: must be 5.0, 5.1 or 5.2. 6.1 membership
  Failure of < < < <
  
  Out of Oracle Universal Installer, log for this session can be found in C:\Program Files\Oracle\Inventory\logs\installActions2012-08-13_03-14-21PM.log
  
  Please press ENTER to exit...
  
  Please give me a solution for this-

  You can do more complicated it must be.

  In forms and reports Oracle Home, you will have a tnsnames.ora (ORACLE_HOME\NETWORK\ADMIN). If it's the file you changed, I would recommend cancelling all changes. Then simply copy and paste the entry from the db entries. So in you case put this in the file tnsnames.ora forms/States:

  ORCL1 =
  (DESCRIPTION =
  (ADDRESS = (PROTOCOL = TCP)(HOST = USER-PC)(PORT = 1521))
  (CONNECT_DATA =
  (SERVER = DEDICATED)
  (SERVICE_NAME = orcl1)
  )
  )
  

  It may be necessary to change the 'USER-PC' above to the IP address or the loopback address (127.0.0.1).

  In the forms/States sqlnet.ora file make this change:

  From:
  

  NAMES. DIRECTORY_PATH = (LDAP, TNSNAMES, EZCONNECT, ONAMES, HOSTNAME)

  
  REPLACE:
  

  NAMES. DIRECTORY_PATH = (TNSNAMES, EZCONNECT, ONAMES, HOSTNAME, LDAP)

  
  The same concept is true for version 11 forms/States

  .

  Published by: Michael Ferrante (Oracle) on August 14, 2012 08:47

• My HP LaserJet 3055 All In One does not scan with Windows 7-64 bit.

  My HP LaserJet 3055 All In One does not scan with Windows 7-64 bit. I can copy and print only. Thank you.

  Hello

  Is the printer connected to your PC by USB or network?

  Using the USB connection, you can scan using Windows Fax and Scan software built into your operating system.

  Scanning over a network connection unfortunately supported on Windows7 32 bit only, as you can find listed in the section about network scanning below:

  http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?&objectID=c02539136#A2

  Kind regards

  Shlomi