Is it normal that H.264 files generated on a computer with Windows 7 64 bit not allow playback on a computer with 32-bit Windows?
I copied the raw images of a concert shot on a Sony HDR-SR11E (i.e., small domestic video camera) to my computer (Windows 7 64-bit) to a USB key. The files cannot be copied to another computer with Windows XP 32-bit. Is this normal? Is it possible to copy images into another format without losing too much quality so that it reproduces the old computer?
32 - bit should not make a difference in this case. The computer probably missing a codec or the necessary software to read the file. The camera format is AVCHD, not very exotic, but may be more recent than the media player on the PC. Try to install something like VLC player on it.
Tags: Premiere
Similar Questions
-
Tried import - does not work. Tried to copy and paste - does not work.
Tried import - does not work. Tried to copy and paste - does not work.
Two reasons the most common for what you describe is disruption of the compacting process, (never touch anything until it's finished), or bloated folders. More about that below.
Why OE insists on compacting folders when I close it? :
http://www.insideoe.com/FAQs/why.htm#compact
Why mail disappears:
http://www.insideoe.com/problems/bugs.htm#mailgone
About file Corruption:
http://www.Microsoft.com/Windows/IE/community/columns/filecorruption.mspxRecovery methods:
If you use XP/SP2 or SP3, and are fully patched, then you should have a backup of your dbx files in the Recycle Bin (or possibly the message store), copied as bak files.
To restore a folder bak on the message store folder, first find the location of the message store.
Tools | Options | Maintenance | Store folder will reveal the location of your Outlook Express files. Note the location and navigate on it in Explorer Windows or, copy and paste in start | Run.
In Windows XP, the .dbx files are by default marked as hidden. To view these files in the Solution Explorer, you must enable Show hidden files and folders under start | Control Panel | Folder options | View.
Close OE and in Windows Explorer, click on the dbx to the file missing or empty file, then drag it to the desktop. It can be deleted later once you have successfully restored the bak file. Minimize the message store.
Open OE and, if the folder is missing, create a folder with the * exact * same name as the bak file you want to restore but without the .bak. For example: If the file is Saved.bak, the new folder should be named saved. Open the new folder, and then close OE. If the folder is there, but just empty, continue to the next step.
First of all, check if there is a bak file already in the message. If there is, and you have removed the dbx file, go ahead and rename it in dbx.
If it is not already in the message, open the trash and do a right-click on the file bak for the folder in question and click on restore. Open the message store up and replace the .bak by .dbx file extension. Close the message store and open OE. Messages must be in the folder.
If messages are restored successfully, you can go ahead and delete the old dbx file that you moved to the desktop.
If you have not then bak copies of your dbx files in the Recycle Bin:DBXpress run in extract disc Mode is the best chance to recover messages:
http://www.oehelp.com/DBXpress/default.aspxAnd see:
http://www.oehelp.com/OETips.aspx#4A general warning to help avoid this in the future:
Do not archive mail in default OE folders. They finally are damaged. Create your own folders defined by the user for mail storage and move your mail to them. Empty the deleted items folder regularly. Keep user created folders under 300 MB, and also empty as is possible to default folders.
Disable analysis in your e-mail anti-virus program. It is a redundant layer of protection that devours the CPUs, slows down sending and receiving and causes a multitude of problems such as time-outs, account setting changes and has even been responsible for the loss of messages. Your up-to-date A / V program will continue to protect you sufficiently. For more information, see:
http://www.oehelp.com/OETips.aspx#3And backup often.
Outlook Express Quick Backup (OEQB Freeware)
http://www.oehelp.com/OEBackup/default.aspx -
I can not start the print spooler as it says that the following file is missing. C:\WINDOWS\system32\spoolsv.exe. How can I download it?
Do a search on your computer, it may have been accidentally moved to another directory. You can also run the System File Checker:
How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
http://support.Microsoft.com/kb/929833or you can just try to copy the file from another computer.
-
In the photoshop preferences, I have defined maximum compatibility "always." Muse won't matter, "place" my folder. I changed my preferences to "ask" re "saving as" with max compatibility so that I could always check the max compatibility has been verified during registration. Muse will not import the photoshop file. Is this a bug? Is there a solution?
Hello
When importing the file into Muse, what is the error/warning you receive. Could you please provide the full message or a screenshot of the error/warning popup
-
When I click on some attachments a box that says: "this file has no program associated with it for performing this action. Create an association in the control panel to define the Associations. " I don't know how to do this (if I'm unable to view these attachments).
How to do would be to install the appropriate program to open attachments if it is not installed, if it is installed the easiest to set the association would be to save a copy of the file on the desktop, right-click and select "open with...". "in the context menu, and then select the appropriate program if it is shown in the dialog box or use search to find it if it is not.
"endoftheroadgal" wrote in the new message: * e-mail address is removed from the privacy... *
When I click on some attachments a box that says: "this file has no program associated with it for performing this action. Create an association in the control panel to define the Associations. " I don't know how to do this (if I'm unable to view these attachments).
-
Recover files of program after reinstallation of Windows 7
I had a technician MS reinstall W7 after that my Windows Update has stopped working. I told her that I did not have a backup and he informed me that he did. I'm still all my files located in "My Documents", but no program file. I saw a Windows.old folder while it was updating, but I ain't.
I tried to reach MS to confirm things that is, if program files have been truly saved or are they gone, etc., but no chance to reach. I lost a chat session last night after waiting for two hours about in the Chat (QC) I'm on the cat once again this morning and after finally getting my turn, the tech said that my session had grown to level 2 and that he might ask someone to call me back. 2 hours later, someone called back and after reviewing my previous case information and confirm my identity (telephone number and e-mail address), he informed me that he was level 1 and I need to talk to someone at level 2. I asked to speak to a supervisor and after being put on hold, the appeal has been abandoned and no one called back. I'm home in Chat tonight, and after 3 hours and 199 people in front of me, the system to a standstill when I got to number 1 for an hour and then I got an error. Now, I have another request for a callback, which will not happen until Thursday. It's Saturday night. I know I am fan but I just need to know what my options are. I don't have a disk for 2 programs that I need, which are to mix, so I'll probably have to buy them back.
I am very frustrated. The first tech should have asked/warned/informed me that my program files would be deleted or removed. Why this would not be saved when all my data was?
You are welcome.
See you soon.
-
Change the database that RH10 uses to generate the file of the CPD
Is it possible to change the database that RH10 uses to generate the CPD file? I have a weird entry in the list of topics in the pod project manager. I deleted the CPD file and let RH10 rebuild but the entrance is always there. My team leader I would get rid of the entry before you send us the translation project. Thank you.
Dang, I noticed the same problem occur with a project, I was trying hard, but eventually I had to start a new copy of the broken and did not create the problem again.
If you use an agency that translated and uses RoboHelp, the last thing I would do is remove the code snippet. They would be brought who once instead of all over the place wherever it is used so your costs. However, it is a parenthesis.
You have a backup of the project so that you can recreate the extract in the hope that the project is good in this and you can then delete again to check that you have used the right option?
See www.grainge.org for creating tips and RoboHelp
-
Is it possible to create a folder that can hide files automatically, when they are copied in it?
Hello!!!
Is it possible to create a folder that can hide files automatically, when they are copied in it? I mean how to program a folder so that everything that he would automatically become hidden? I would be very grateful...
Is it possible to create a folder that can hide files automatically, when they are copied in it?
Yes. A sort of roundabout.
For this example, create a folder on your C drive named HideTest.
Download http://winsupport.org/utilities/freedos-choice.html Choice.Exe (click on the link to download the utility program near the bottom of the page. "And save it in the C:\HideTest folder).
Open Notepad and then copy and paste the following text in it:
Off @Echo
: All
Set FilesToHide = No.: GoToDir
C:
cd\HideTest: Top
CLS
IF FilesToHide %! Is Yes! Attrib *. * + H: Choice
Choice.Exe /c:YN t:Y, 30 are looking for files to hide
If ErrorLevel 2 Goto: exit: MakeList
Dir > TempList.Txt: CheckFiles
Set FilesToHide = No.
Find.Exe "0 file (s)' TempList.Txt
If ErrorLevel 1 Set FilesToHide = Yes
If exist TempList.Txt Del TempList.Txt: Loop
Goto: Top: Output
Set FilesToHide =
If exist TempList.Txt Del TempList.Txt
OutputClick on file, then save under...
Go to C:\HideTest
Name the file Hide.Bat
Click Save
Close Notepad
Open Windows Explorer
Go to C:\Documents and Settings\UserName\Start where user_name is your own username.
In the right pane, right click, select New, and then click shortcut.
Click Browse, and then navigate to C:\HideTest and click on Hide.Bat, click Next.
Type a new name or accept the default name and click Finish.
Right-click on the newly created shortcut, and click Properties.
Change the race: from the normal window to reduced.
Click on apply, and then click Ok.
Restart your computer.
Note: In the line above Choice.Exe c:YN t:Y, 30 are looking for files to hide, 30 is the number of seconds it will wait before checking the new files. This can be from 1 to 99.
Edit: Just to satisfy my curiosity, why do you do this?
-
Hello
I am in the recovery of the system, which I have to by selecting f8 and "repair your computer", and after taking me to a window that says "select an oprerating system to repair...." If you don't see your operating system listed, click load drivers to load the drivers for your hard disks'. Then when I click load drivers he wants me to select a file in System32 menu configuration information, but I don't know what to choose.
Thank you
Centi
Hi centi,.
1. Why did you start the windows recovery environment by pressing the F8 key?
2. do you get an error at startup of the system?If you are unable to start Windows in normal mode, try the following steps:
a. boot to the Windows recovery environment by pressing the F8 key.
b. on the window that says "select an operating system to repair" click Cancel to see Windows Recovery Options window, and then select command prompt.
(c) in the command prompt, type the following command and press ENTER: Bootrec.exe /RebuildBcd
Output Type d and hit enter to close the command prompt.
f. restart the computer in normal mode and check if the computer starts Windows successfully.Visit our Microsoft answers feedback Forum and let us know what you think.
-
I have windows vista. Initially I had problems to install updates trying to fix this problem, I have read some information on how I can check my computer. I ran the scan and it's results, he said. I'm not totally sure what to do now! Help, thank you
and the repair operation
2012-07-29 15:30:33, 000000e0 CSI Info [SR] verification complete
2012-07-29 15:30:34, Info CSI [SR] 000000e1 check 100 (0
x 00000064) components
2012-07-29 15:30:34, Info CSI 000000e2 [SR] beginning verify
and the repair operation
2012 07-29 15:30:37, CSI Info 000000e4 Verify [SR] full
2012-07-29 15:30:37, info CSI 000000e5 [SR] check 100 (0
x 00000064) components
2012-07-29 15:30:37, info CSI 000000e6 verify start [SR]
and the repair operation
2012-07-29 15:30:38, Info CSI [SR] 000000e7 can not check co
files mposante for 2149b2158bd96fd6f2822a85eab7e135, Version = 1.0.6001.18551, pA
= PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, P
ublicKeyToken = {l:8, b:6595b64144ccf1df}, Type neutral, neutral, TypeName Public
Neutral, clear key may be damaged (TRUE)
2012-07-29 15:30:39, 000000e9 CSI Info [SR] verification complete
2012-07-29 15:30:40, info CSI 000000ea [SR] check 100 (0
x 00000064) components
2012-07-29 15:30:40, info CSI 000000eb verify start [SR]
and the repair operation
2012-07-29 15:30:41, 000000ec CSI Info [SR] cannot be verified co
files mposante for 2f63d026d754a8db019f0dc3628c7956, Version = 6.0.6002.18208, pA
= PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, P
ublicKeyToken = {l:8, b:31bf3856ad364e35}, Type neutral, neutral, TypeName Public
Neutral, clear key may be damaged (TRUE)
2012 07-29 15:30:42, 000000ee CSI Info [SR] verification complete
2012-07-29 15:30:42, info CSI 000000ef [SR] check 100 (0
x 00000064) components
2012-07-29 15:30:42, info CSI 000000f0 verify start [SR]
and the repair operation
2012-07-29 15:30:44, 000000f1 CSI Info [SR] cannot be verified co
files mposante for 37bad053109c1ba5e6cbc63d747eecc7, Version = 1.1.6001.18551, pA
= PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, P
ublicKeyToken = {l:8, b:6595b64144ccf1df}, Type neutral, neutral, TypeName Public
Neutral, clear key may be damaged (FALSE)
2012-07-29 15:30:44, 000000f3 CSI Info [SR] verification complete
2012-07-29 15:30:45, info CSI 000000f4 [SR] check 100 (0
x 00000064) components
2012-07-29 15:30:45, info CSI 000000f5 verify start [SR]
and the repair operation
2012-07-29 15:30:47, 000000f7 CSI Info [SR] verification complete
2012-07-29 15:30:48, info CSI 000000f8 [SR] check 100 (0
x 00000064) components
2012-07-29 15:30:48, info CSI 000000f9 verify start [SR]
and the repair operation
2012-07-29 15:30:49, 000000fa CSI Info [SR] cannot be verified co
files mposante for 4857475077b555ed33e5111d715efd70, Version = 6.0.6002.18208, pA
= PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, P
ublicKeyToken = {l:8, b:31bf3856ad364e35}, Type neutral, neutral, TypeName Public
Neutral, clear key may be damaged (TRUE)
2012-07-29 15:30:50, 000000fb CSI Info [SR] cannot be verified co
files mposante for 4c591c4a3483f38370c34586c8bde52a, Version = 6.0.6001.18520, pA
= PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, P
ublicKeyToken = {l:8, b:31bf3856ad364e35}, Type neutral, neutral, TypeName Public
Neutral, clear key may be damaged (TRUE)
2012-07-29 15:30:50, 000000fd CSI Info [SR] verification complete
2012-07-29 15:30:50, info CSI 000000fe [SR] check 100 (0
x 00000064) components
2012-07-29 15:30:50, info CSI 000000ff verify start [SR]
and the repair operation
2012 07-29 15:30:52, info CSI 00000100 [SR] cannot be verified co
files mposante for 5200c2ac8c8c53edef36bc7fe456c18a, Version = 6.0.6002.18208, pA
= PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, P
ublicKeyToken = {l:8, b:31bf3856ad364e35}, Type neutral, neutral, TypeName Public
Neutral, clear key may be damaged (TRUE)
2012 07-29 15:30:53, info CSI 00000102 [SR] verification complete
2012-07-29 15:30:53, info CSI 00000103 [SR] check 100 (0
x 00000064) components
2012 07-29 15:30:53, info CSI 00000104 [SR] beginning verify
and the repair operation
2012 07-29 15:30:55, info CSI 00000106 [SR] verification complete
2012-07-29 15:30:56, info CSI 00000107 [SR] check 100 (0
x 00000064) components
2012 07-29 15:30:56, info CSI 00000108 [SR] beginning verify
and the repair operation
2012 07-29 15:30:56, info CSI 00000109 [SR] cannot be verified co
files mposante for 61938ea6c8a81f63a790d27b6cf8f16e, Version = 6.0.6001.18426, pA
= PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, P
ublicKeyToken = {l:8, b:31bf3856ad364e35}, Type neutral, neutral, TypeName Public
Neutral, clear key may be damaged (FALSE)
2012-07-29 15:30:58, CSI Info 0000010b Verify [SR] full
2012-07-29 15:30:59, info CSI 0000010 c [SR] check 100 (0
x 00000064) components
2012 07-29 15:30:59, info CSI 0000010 d [SR] beginning verify
and the repair operation
2012 07-29 15:31:01, Info CSI 0000010f [SR] Verify complete
2012-07-29 15:31:01, info CSI 00000110 [SR] check 100 (0
x 00000064) components
2012 07-29 15:31:01, info CSI 00000111 [SR] beginning verify
and the repair operation
2012 07-29 15:31:05, info CSI 00000113 [SR] verification complete
2012-07-29 15:31:05, info CSI 00000114 [SR] check 100 (0
x 00000064) components
2012 07-29 15:31:05, info CSI 00000115 [SR] beginning verify
and the repair operation
2012 07-29 15:31:07, info CSI 00000117 [SR] verification complete
2012-07-29 15:31:08, info CSI 00000118 [SR] check 100 (0
x 00000064) components
2012 07-29 15:31:08, info CSI 00000119 [SR] beginning verify
and the repair operation
2012-07-29 15:31:10, CSI Info 0000011b Verify [SR] full
2012-07-29 15:31:11, info CSI 0000011 c [SR] check 100 (0
x 00000064) components
2012 07-29 15:31:11, info CSI 0000011 d [SR] beginning verify
and the repair operation
2012 07-29 15:31:15, Info CSI 0000011f [SR] Verify complete
2012-07-29 15:31:15, info CSI 00000120 [SR] check 100 (0
x 00000064) components
2012 07-29 15:31:15, info CSI 00000121 [SR] beginning verify
and the repair operation
2012 07-29 15:31:17, info CSI 00000123 [SR] verification complete
2012-07-29 15:31:18, info CSI 00000124 [SR] check 100 (0
x 00000064) components
2012 07-29 15:31:18, info CSI 00000125 [SR] beginning verify
and the repair operation
2012 07-29 15:31:21, info CSI 00000126 [SR] cannot be verified co
files mposante for b246b8b2fc232b1823de7cc95d2ad8cb, Version = 6.0.6001.18426, pA
= PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, P
ublicKeyToken = {l:8, b:31bf3856ad364e35}, Type neutral, neutral, TypeName Public
Neutral, clear key may be damaged (TRUE)
2012 07-29 15:31:21, info CSI 00000128 [SR] verification complete
2012-07-29 15:31:22, info CSI 00000129 [SR] check 100 (0
x 00000064) components
2012-07-29 15:31:22, info CSI 0000012a verify start [SR]
and the repair operation
2012 07-29 15:31:24, CSI Info 0000012 c [SR] verification complete
2012-07-29 15:31:25, info CSI [SR] 0000012d check 100 (0
x 00000064) components
2012-07-29 15:31:25, info CSI 0000012e verify start [SR]
and the repair operation
2012-07-29 15:31:27, CSI 0000012f [SR] Info cannot be verified co
files mposante for c14dc8477e46e9a63d64b6e08d5791c3, Version = 6.0.6002.18208, pA
= PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, P
ublicKeyToken = {l:8, b:31bf3856ad364e35}, Type neutral, neutral, TypeName Public
Neutral, clear key may be damaged (TRUE)
2012 07-29 15:31:27, info CSI 00000131 [SR] verification complete
2012-07-29 15:31:28, info CSI 00000132 [SR] check 100 (0
x 00000064) components
2012 07-29 15:31:28, info CSI 00000133 [SR] beginning verify
and the repair operation
2012 07-29 15:31:30, info CSI 00000135 [SR] verification complete
2012-07-29 15:31:30, info CSI 00000136 [SR] check 100 (0
x 00000064) components
2012 07-29 15:31:30, info CSI 00000137 [SR] beginning verify
and the repair operation
2012 07-29 15:31:32, info CSI 00000138 [SR] cannot be verified co
files mposante for d53a8c69bdc376747b8a05f13e3c7b8c, Version = 6.0.6002.18208, pA
= PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, P
ublicKeyToken = {l:8, b:31bf3856ad364e35}, Type neutral, neutral, TypeName Public
Neutral, clear key may be damaged (TRUE)
2012-07-29 15:31:33, CSI Info 0000013a Verify [SR] full
2012-07-29 15:31:33, info CSI 0000013b [SR] check 100 (0
x 00000064) components
2012-07-29 15:31:33, info CSI 0000013 c [SR] beginning verify
and the repair operation
2012-07-29 15:31:36, Info CSI 0000013e [SR] full Verify
2012-07-29 15:31:36, info CSI 0000013f [SR] check 100 (0
x 00000064) components
2012 07-29 15:31:36, info CSI 00000140 [SR] beginning verify
and the repair operation
2012 07-29 15:31:42, info CSI 00000142 [SR] verification complete
2012-07-29 15:31:43, info CSI 00000143 [SR] check 100 (0
x 00000064) components
2012 07-29 15:31:43, info CSI 00000144 [SR] beginning verify
and the repair operation
2012 07-29 15:31:43, info CSI 00000145 [SR] cannot be verified co
files mposante for e8ecb225ded34cf1c95d86a0b62c0df1, Version = 6.0.6002.18490, pA
= PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, P
ublicKeyToken = {l:8, b:31bf3856ad364e35}, Type neutral, neutral, TypeName Public
Neutral, clear key may be damaged (TRUE)
2012-07-29 15:31:45, Info CSI 00000147 [SR] check complete
2012-07-29 15:31:46, info CSI 00000148 [SR] check 100 (0
x 00000064) components
2012 07-29 15:31:46, info CSI 00000149 [SR] beginning verify
and the repair operation
2012-07-29 15:31:48, CSI Info 0000014b Verify [SR] full
2012-07-29 15:31:49, info CSI 0000014 c [SR] check 100 (0
x 00000064) components
2012 07-29 15:31:49, info CSI 0000014 d [SR] beginning verify
and the repair operation
2012-07-29 15:31:49, CSI 0000014e [SR] Info cannot be verified co
files mposante for ff2aece97c0e1cb2653c15e0fecbce68, Version = 6.0.6002.18407, pA
= PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, P
ublicKeyToken = {l:8, b:31bf3856ad364e35}, Type neutral, neutral, TypeName Public
Neutral, clear key may be damaged (TRUE)
2012 07-29 15:31:54, info CSI 00000150 [SR] verification complete
2012-07-29 15:31:54, info CSI 00000151 [SR] check 100 (0
x 00000064) components
2012 07-29 15:31:54, info CSI 00000152 [SR] beginning verify
and the repair operation
2012 07-29 15:31:59, info CSI 00000153 [SR] cannot repair me
House file [l:20 {10}] "pcasvc.dll" Microsoft-Windows-Application-experience-Pro
Gram-Compatibility-Assistant, Version 6.0.6001.18000, pA = PROCESSOR_ARCHITECT =
URE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b
{: 31bf3856ad364e35}, type neutral, PublicKey neutral, TypeName neutral in the sto
Re, the file is missing
2012 07-29 15:32:02, info CSI 00000154 [SR] cannot repair me
House file [l:20 {10}] "pcasvc.dll" Microsoft-Windows-Application-experience-Pro
Gram-Compatibility-Assistant, Version 6.0.6001.18000, pA = PROCESSOR_ARCHITECT =
URE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b
{: 31bf3856ad364e35}, type neutral, PublicKey neutral, TypeName neutral in the sto
Re, the file is missing
2012-07-29 15:32:02, info CSI 00000155 [SR] this component w
referenced under the name of [l:158 {79}] "Package_20_for_KB936330 ~ 31bf3856ad364e35 ~ x 86 ~ ~ 6.0.1"
".18000.936330 - 33_neutral_GDR".
2012 07-29 15:32:03, info CSI 00000156 [SR] couldn't reproj
ECT corrupted file [ml:520 {260}, l:46 {23}] '------? \C:\Windows\System32"\[l:20{10}]"PC
ASVC.dll '; source file in the store is also corrupted
2012 07-29 15:32:03, info CSI 00000158 [SR] verification complete
2012-07-29 15:32:04, info CSI 00000159 [SR] check 100 (0
x 00000064) components
2012-07-29 15:32:04, info CSI 0000015a verify start [SR]
and the repair operation
2012 07-29 15:32:10, CSI Info 0000015 c [SR] verification complete
2012-07-29 15:32:11, info CSI 0000015 d [SR] check 100 (0
x 00000064) components
2012-07-29 15:32:11, info CSI 0000015e verify start [SR]
and the repair operation
2012-07-29 15:32:18, Info CSI 00000161 [SR] check complete
2012-07-29 15:32:19, info CSI 00000162 [SR] check 100 (0
x 00000064) components
2012 07-29 15:32:19, info CSI 00000163 [SR] beginning verify
and the repair operation
2012 07-29 15:32:26, info CSI 00000166 [SR] verification complete
2012-07-29 15:32:27, info CSI 00000167 [SR] check 100 (0
x 00000064) components
2012 07-29 15:32:27, info CSI 00000168 [SR] beginning verify
and the repair operation
2012-07-29 15:32:34, CSI Info 0000016a Verify [SR] full
2012-07-29 15:32:35, Info CSI 0000016 b [SR] 100 (0 check
x 00000064) components
2012-07-29 15:32:35, Info CSI 0000016 c [SR] beginning verify
and the repair operation
2012 07-29 15:32:52, info CSI 00000174 [SR] verification complete
2012-07-29 15:32:53, info CSI 00000175 [SR] check 100 (0
x 00000064) components
2012 07-29 15:32:53, info CSI 00000176 [SR] beginning verify
and the repair operation
2012-07-29 15:33:04, CSI Info 0000017a Verify [SR] full
2012-07-29 15:33:05, info CSI 0000017b [SR] check 100 (0
x 00000064) components
2012 07-29 15:33:05, info CSI 0000017 c [SR] beginning verify
and the repair operation
2012-07-29 15:33:12, Info CSI 0000017e [SR] full Verify
2012-07-29 15:33:13, info CSI 0000017f [SR] check 100 (0
x 00000064) components
2012 07-29 15:33:13, info CSI 00000180 [SR] beginning verify
and the repair operation
2012 07-29 15:33:28, info CSI 00000182 [SR] verification complete
2012-07-29 15:33:29, info CSI 00000183 [SR] check 100 (0
x 00000064) components
2012 07-29 15:33:29, info CSI 00000184 [SR] beginning verify
and the repair operation
2012 07-29 15:33:42, info CSI 00000186 [SR] verification complete
2012-07-29 15:33:43, info CSI 00000187 [SR] check 100 (0
x 00000064) components
2012 07-29 15:33:43, info CSI 00000188 [SR] beginning verify
and the repair operation
2012-07-29 15:34:02, CSI Info 0000018a Verify [SR] full
2012-07-29 15:34:02, info CSI 0000018 [SR] b check 100 (0
x 00000064) components
2012 07-29 15:34:02, info CSI 0000018 c [SR] beginning verify
and the repair operation
2012 07-29 15:34:11, Info CSI 0000018 d [SR] cannot be verified co
mposante files for Microsoft-Windows-font-TrueType-EucrosiaUPC, Version = 6.0.600
2.18208, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope =
1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neut.
RAL, PublicKey neutral, the manifest may be damaged (REAL)
2012-07-29 15:34:11, CSI 0000018e [SR] Info cannot be verified co
mposante files for Microsoft-Windows-font-TrueType-TrebuchetMS, Version = 6.0.600
2.18208, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope =
1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neut.
RAL, PublicKey neutral, the manifest may be damaged (REAL)
2012-07-29 15:34:12, CSI 0000018f [SR] Info cannot be verified co
mposante files for Microsoft-Windows-font-TrueType-ArialBlack, Version = 6.0.6002
. 18208, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1
nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutr
Al, PublicKey neutral, the manifest may be damaged (REAL)
2012 07-29 15:34:12, info CSI 00000190 [SR] cannot be verified co
mposante files for Microsoft-Windows-font-TrueType-JasmineUPC, Version = 6.0.6002
. 18208, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1
nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutr
Al, PublicKey neutral, the manifest may be damaged (REAL)
2012 07-29 15:34:27, info CSI 00000194 [SR] verification complete
2012-07-29 15:34:27, info CSI 00000195 [SR] check 100 (0
x 00000064) components
2012 07-29 15:34:27, info CSI 00000196 [SR] beginning verify
and the repair operation
2012 07-29 15:34:27, info CSI 00000197 [SR] cannot be verified co
mposante files for Microsoft-Windows-font-TrueType-LeelawadeeBold, Version = 6.0.
6002.18208, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope
= nonSxS 1, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName n
eutral, PublicKey neutral, the manifest may be damaged (REAL)C:\Windows\System32>Sfcdetails.txt
'sfcdetails.txt' is not recognized as an internal or external command
operable program or batch file.C:\Windows\System32 >
Hello
(1) what exactly happens when you try to install updates?
(2) you get any error message?
(3) what is the description for updates which are failed?
I suggest you try the steps mentioned below and check if it helps.
Method 1: Try to reset components to update Windows from the following link and then try to install the updates.
http://support.Microsoft.com/kb/971058
Method 2: To resolve this problem, I suggest to read the article below and follow the steps in the link and check if that helps.
Note: It's also applies to windows 7:
How to analyze the entries in log file generating the program Checker (SFC.exe) resources of Microsoft Windows in Windows Vista:
http://support.Microsoft.com/kb/928228
You can also consult the following link for more information:
Troubleshoot problems with installing updates.
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates
Hope this information is useful.
-
contents of the copy of the PDF file generated using Pagemaker 6.5C
My colleague has generated a set of PDF files generated using Pagemaker 6.5C (Mac version).
Now I want to copy the contents of PDF files (many Chinese words).
How can not highlighted all Chinese characters, when I tried to copy them.
Although I can highlight most of Chinese characters, I got a lot of weird as sighs "#!" "$#" but not original content.
You say please what can I do to get the Chinese characters copied (100%)?
Thank you very much!
You need the exact fonts of your colleague, and even in this case, it may not work if they subset fonts in the pdf file. Your best bet is to get your colleague to copy the text for you in a format that you can use, but even in this case, you will need the fonts, pagemaker is rather limited in the fonts that can be used and required a lot of special fonts in order to work.
Jay -
All files generated by a coil in sqlplus receive ownership of oracle: dba instead of the user of the BONE started sqlplus and run the script. There's a file with users owners of BONES of the coil.
Script launched in until OS user 'A' on the 'A' server which launches sqlplus, then connects to a remote database through a service of tnsnames.ora as another user of the database and the results of this script are spoulées on the server "A".
The file queued on the old server is written with rw-rw-r: read write user, group read the writing, reading and possession header that is the user of the OS. The file queued on the new server is written to rw-r-r user: reading writing, reading group, public reading and ownership oracle: dba.
"" The user then has no privileges to modify the file and continue the process of transmitting the file, editing and deleting the file for the next set of commands. This allows us to keep the possibility to migrate to the new server we are unable to process orders.
$ORACLE_HOME/bin/sqlplus - s user/password@prd1 @./script/CustomScript/R12_OM_UFPC-oracle.sql
Background: old server running 4.8, Oracle 10.2.0.4 OEL
New server running OEL 6.5, Oracle 11.2.0.4
Tested so far:
File and update umask to 0002 instead of 0022 is now generated as rw-r-r. However, the property is still oracle: dba.
Update of ownershipt of $ORACLE_HOME/bin/oracle.exe of oracle: oracle (edi added the user to the oracle group) and chmod 6751 oracle.exe. This created several problems where crucial scripts, that is to say of sqlplus failed to run.
Added! chmod 755 output.file.name - OS user 'A' is not allowed to change to mod.
Added! command cp MV output file and that generated the file as a user of the operating system: oracle. It is a potential work around in case of emergency, but the developer would have to rewrite the countless scripts.
Any ideas?
I have reproduced the behavior of the old server and am able to spool a file via sqlplus under OS user. No changes have been made on the remote database server. All the changes have been on the new server hosting a small 11.2.0.4 database on a server running OEL 6.5 32 - bit OS.
(1) removed the sticky bit $ORACLE_HOME/bin/sqlplus using chmod u-s, g-s, o - s suggestion of Billy ~ Verreynne
(2) modified the main group for the 'oracle' user match the user operating system applications, while maintaining membership in the groups 'oracle' and 'dba '.
-We are dealing with here EDI processes, so the Group was called edi.
(3) modified property of the files tnsnames.ora and listener.ora for oracle: edi
(4) restart the receiver
(5) disconnect / reconnect
Script runs as expected, the output file contains the correct ownership and permissions.
Thank you all for taking a look and offering options.
-Josh
-
What is the best way to get a SVG file generated from After Effects?
What is the best way to get a SVG file generated from After Effects?
Is there a script to do this? I use the SVG file directly in my work. I did research online, but find that it has no native support of EI to achieve.
I found some scripts online, but they convert output Adobe AE to the JSON file. Is there something similar available for the SVG file?
Thank you
AE makes pixels not vectors, so it's not possible.
-
Hello Experts,
I read articles on the log redo and undo segment files. I was wondering something very simple. That redo log files waiting in there? It stores the sql statements?
Lets say that my update statement to modify 800 blocks of data. A unique single update statement can modify different data 800 right blocks? Yes, it may be true. I think that these data blocks can not hold buffers to the log to roll forward, right? I mean I know exactly what to do redo log buffer and redo log file. And I know that the task of backgrounding LGWR. But, I wonder if she she holds the data blocks? It is not supposed to hold data like cache buffer blocks, right?
My second question is, rollback isn't effect to restore the newspaper to the right buffer? Because it does not need log buffer for effect do it again. Conversely, the restoration; statement is included in the restore log buffer by progression when someone isse, am I right?
As far as I know, rollback interact directly with UNDO TABLESPACE?
I hope that I have to express myself clearly.
Thanks in advance.
Here's my question:
My second question is, rollback isn't effect to restore the newspaper to the right buffer? Because it does not need log buffer for effect do it again. Conversely, the restoration; statement is included in the restore log buffer by progression when someone isse, am I right?
As far as I know, rollback interact directly with UNDO TABLESPACE?
Yes, where else would the undo data come from? Undo tablespace contains the Undo segments that contain the Undo data required for the restoration of your transaction.
I can say that rollback does not alter the data of the log buffer rede to the past. In other words, change vectors will be remain the same before restoration. Conversely, rollback command is also recorded in the log file of restoration by progression. As the name, all orders are saved in the REDO LOGS.
I hope that I am wrong so far?
Not sure why you even the buffer log roll forward for Rollback? This is the reason why I asked you it was for, where occurs the dose the cancellation? And the answer for this is that it happens in the buffer cache. Before you worry about the drivers of change, you must understand that it is not serious what contains where as long as there is no transaction recorded in the operating of the Undo segment table. If the operating table indicates that the transaction is longer there, there must be a cancellation of the transaction. Vectors of change are saved in the file log roll forward, while the restore happens on blocks of data stored in the file "data" undo blocks stored in the undo file "data".
At the same time I read an article about redo and undo. In this article process transaction is explained. Here is the link http://pavandba.files.wordpress.com/2009/11/undo_redo1.pdf
I found some interesting information in this article as follows.
It is worth noting that during the restore process, recovery logs never participate. The only time where redo logs are read is retrieving and archiving. This is the concept of tuning key: redo logs are written on. Oracle does not read during normal processing. As long as you have sufficient devices so that when the ARC is reading a file, LGWR's writing to a different device, then there no contention for redo logs.
If redo logs are never involved in the restoration process, how is it Oracle will then know the order of the transaction? As far as I know it is only written in redo logs.
I have thoughts very amazed to Aman.
Why you ask?
Now, before giving a response, I say two things. One, I know Pavan and he is a regular contributor to this forum and on several other forums Facebook and two, with all due respect to him, a little advice for you, when you try to understand a concept, to stick to the Oracle documentation and do not read and merge articles/blog-posts from the web. Everone, which publishes on the web, has their own way to express things and many times, the context of the writing makes it more confusing things. Maybe we can erase the doubts that you can get after reading the various search results on the web.
Redo logs used for the restoration, not to restore. The reason is the redo log files are applied in sequential order, and this is not the case when we look for the restoration. A restore is required to do for a few blocks away. Basically, what happens in a restoration, is that the records of cancellation required for a block of data are sought in the reverse order of their creation. The entry of the transaction is in the slot ITL of the block of data that point to the necessary undo bytes Address (UBA) using which oracle also knows what that undo the blocks would be necessary for the restoration of your transaction. As soon as the blocks of data will be cancelled, the ITL slots would be cleared as well.
In addition, you must remember, until the transaction is not qualified as finished, using either a commit or a rollback, the cancellation of this data would remain intact. The reason for this is that oracle would ensure that undo data would be available to make the cancellation of the transaction. The reason why Undo data are also recorded in the journals of recovery is to ensure that in the event of the loss of the cancellation of the data file, retrieving them would be possible. Because it would also require changes that's happened on the blocks cancel, restore the vectors change associated with blocks of cancellation are also saved in the buffer log roll forward and, in the redo log files.
HTH
Aman...
-
Problems of conversion of PDF to MS Word document. I managed to convert 4 files and now the subsequent files generate a "Conversion failed" error when you try to convert the file. I have a big manuscript and I separated each chapter to help the conversion; as I said, the first 4 pieces without problem, then the conversion failure. I tried to convert the document integer and same result. Specifically, I bought the feature export to Word. Please help. I had initially export the Word Perfect PDF document and attempting to pass PDF to MS Word.
Hi sdr2014,
I'm sorry to hear that your conversion process is at a standstill. It seems that the problem is not specific to a single file, you have been unable to convert anything, since the first four chapters of a correct conversion.
So, let's try this:
If you want to convert via the ExportPDF site, please sign out, clear the browser cache, and then reconnect. If you use the drive, please choose Help > updates to ensure that you have installed the latest version.
Please let us know how it goes.
Best,
Sara
Maybe you are looking for
-
Toshiba satellite 220cs! I NEED HELP
I have a card Xircom RealPort CardBus Ethernet 10 / 100 + Modem 56 k (model RBEM56G-100), but when I try to insert into the pcmcia slot on my laptop, the card is not detected. However, when I try to insert a card Xircom CreditCard Ethernet 10 / 100 +
-
Pavilion dm4: F12key orange light is on and the wifi can not be evaluated
Hi, my F12 key is the amber light and cannot be disabled. And I can't use wifi on my laptop. I can use the Ethernet cable however. product is HP Pavilion dm4, I opened the Manager under network adapters and device, installed as Intel(r) WiFi Link 100
-
Slow performance - new lenovo G40-45 AMD A8-6410
Hello I just bought new Lenovo G40-45, with proc AMD A8-6410, RAM 2Gb.Being honest, this is my first laptop with AMD proc. software in the laptop are always 'standard' in ways that I did not add anything, just by using what he has. But from my point
-
When the lap top is online, you can see his tent to connect, but after pressing X on the signifier, he said. !
-
You format it to reinstall Windows Vista?
Hello! I discovered that my Vista laptop must have resettled windows as there was some curruption of some of the features - DVD player and USB connections.Help! Thank you Cathie