Which cable Mini SAS to PE T410?

Similar Questions

• Which cable shoud I use between perc h700 and F678M bottom of basket R310

  install a h700 to my server r310 for 4 x, 3.5sas raid5 planning table

  but not sure how to connect h700 with F678M

  Sorry for that google translated English lol

  Lx100.

  You will need cable Mini SAS of P/N N262J for the connection between the controller and the motherboard.

  Let me know if you have any other questions.

• Tecra M11: Which cable to connect to a HDMI TV

  a few quick questions,

  1 should. which cable I expect to connect my laptop to tv HDMI preference?
  I only have a mini port something and a SATA Sockets...

  2. I would try to use my laptop for the fax however there is no modem can I buy one?
  What exactly should I buy if yes? cause I don't have the phone jack to connect a telephone line...

  Help a docking station? who is in the docking station?

  Thank you
  Etty

  Which Tecra M11 you exactly (M11 - xxx)?
  I just want to check which video ports are available on your laptop.

  Akuma is right. If you are looking for an external solution (USB or ExpressCard Modem), but Internet slution is also very good option.

• Where can I buy HP Mini SAS 4i adapter cable?

  Specifically, the cable NQ097AA? Is there a part 3 equivalients? I have a LSI 9260-4i and blindmate Sata cables in my HpZ800.

  Curious cable. You can callhere for pricing. See here andhere in the US.

  States are compatible with Z400/600.  No mention of Z800.

• Hi, come the E15 Aspire. Which cable HDMI should I expect?

  Hi can someone Advisor, which HDMI cable, I should get, in order to connect to my TV. ?

  HDMI 1.3 and higher.

• Printer LaserJet 4100: Should which cable I for Laserjet 4100 connected to the laptop with USB port

  I have the HP Laserjet 4100 printer. I bought a new laptop with USB ports.  What type of printer cable I need to connect the printer to my laptop? Is there some kind of printer cable adapter, or something else that will do the trick?

  I have the same question about my HP Laserjet 1100 printer.

  Thanks in advance for your assistance expected.

  If I remember correctly, the 1100 uses a cable "C", alias MicroCentronics.  Have never seen an adapter for that one.  On the 4100, you can get a USB to parallel adapter.  They are pretty cheap and available at most CESS (Consumer Electronics Super Store) as Best Buy.  Staples and OfficeMax/Office Depot should also wear.  Online is cheaper if you have time to wait.

  The thing with these USB converters is often must 'install' the cable first.  In other words, connect it to the laptop, then wait so he could install, then connect the printer.  Depending on your operating system and if you have correct updates that can be almost instantaneous, and you may not even see it pop on the screen.

  Best idea is that since these are obviously not portable machines, connect them to your router via a network card.  I had the 1100 years and used a cheap 170 X.  I know most recent are available which are faster.

  For the 4100, see if you can retrieve a Jet Direct 620 unit on eBay.  Probably less than $50 and sometimes even as little as $25.  Stay away from the 600, 510 or 615 cards.  Low or as the 600, they can leave your network open to hackers.  No need to get Gigabit cards as they will be well above what the 4100 can handle.

  Now, two of these old devices, processing power and memory can be a problem.  Never try to print documents online.  Save them on your laptop, and then print.  You will probably get communication errors if you print directly from IE or FireFox.

  If the 1100 does not die, not even worth fixing.  Put into a Fuser is a nightmare.  The 4100 will probably work for another 20 years if you keep to clean and replace the rolls before they cause jams.

• New HARD drive not recognized by the SAS on PowerEdge T410 controller

  One of the drives has failed on my RAID 1 configuration, so I bought a non-certified dell, Seagate Barracuda 500 GB drive (other readers were 250 GB).

  I turned off the machine and swapped the failed drive with a new one (cable connections)

  When I boot in Sas (SAS 6 ir) controller, it shows that the disk is missing.

  I turned off the server and changed the cables from the primary to the new disk, to see if it would make a difference. None. Watch again ' driving status: missing.

  What I have to buy dell certified readers? I'm doing something wrong? Or is the obsolete RAID controller?

  Any help would be appreciated! My primary hardrive gives signs of failure. I have a picture of him, but I'd like to get it mirrored on my new record ASAP.

  Thank you

  Hello director87

  Go to the RAID properties > manage table > manage Hot Spare disks. You should see a list of all drives that detects the controller. Your RAID 1 drives will be listed as primary and secondary. The new drive should not be anything in the area of the 'State of the drive. Use the arrows to select the new disk and keys to assign it as a spare drive + /. After you assign it as a spare drive it should start to rebuild.

  If you don't see the drive in the list, then check the screen of the SAS topology. If you see in the SAS topology then use CTL D to shoot to the top of the additional options. Let me know if it will allow you to do something to the reader in this screen. If you don't see in SAS topology then it does not appear that the controller is able to communicate properly with this player.

  Thank you

• Satellite 5200 701: which cable should I connect to PJ2 port on motherboard

  Hello world.

  Currently, I am trying to fix a laptop Satellite 5200 701. The keyboard and touchpad are both dead but see the place in the Device Manager.

  When I opened the folder, I found the motherboard has an empty on port marked PJ2.
  When I looked in to it that I discovered that this is a port to connect a cable that feeds power to the keyboard, so I think that's the problem.

  My problem is trying to find out what wire should be connected to it and what another port.

  If someone could help, I would be grateful.
  Thank you very much.

  Hello

  How can you come to the idea that the keyboard needs some extra internal powersupply? The keyboard has only one connector that is important, and this is the connector of the KEYBOARD. Only this and nothing else.
  If there is an empty port then it has nothing to do an extra wire must be connected or whatever.

  Another thing: If the keyboard and touchpad appear in Device Manager then why they do not work? Didn t you think a software framework could be the problem? Please try another operating system, a linux live CD might be a good choice to make sure that the keyboard and the touchpad are really not work.

  Simply reconnect the keyboard and then try a linux live CD (knoppix would be a good choice, but you can also try ubuntu) to check if it work s.

  Welcome them

• I just bought and downloaded the installer from Lightroom 6 application. Installation failed implantation problem - "Product is only supported on 64-bit machines", which obviously, mine is not. How do I remedy this problem, or 'return' howto and cancell t

  Just purchased and downloaded Lightroom 6. Failed installation: "Product is only supported in 64-bit" machines, mine eviently is 32. This problem can be corrected or should I "return" / cancelled the purchase. If so, how should I proceed? Thank you.

  Please contact the Support from Adobe on the Customer Contact

• Which cable Firwire

  I have an Inspiron 530 with a Firewire port that is mounted on the front. I want to connect a JVC digital camcorder, but I'm not sure if I need a 4-4 pins or cable 4-6.

  Any help greatly appreciated

  Here is a picture of the 6-pin and 4-pin connector.  On my camcorder, I use a 4 pins on the camera to a 6 pin on the PC.

  http://www.Cortland.edu/FLTEACH/mm-course/vid-Cap-firewire1.jpg

  Edit to try to insert the picture, but we are not allowed if the link instead.

• How can I change a name on my apple devices? I multiply which ARE MINE, BUT THEY ARE ENTIRELY USED BY MY KIDS?

  I HAVE MUTILPY DEVICES, IPHONE 6, IPAD AND MACBOOK AIR AND MACBOOK PRO.  THESE DEVICES HAVE FOR THE MOST PART, SAME NAMES KELLY AND OTHERS FROM THE GRACE AND PHYLLIS THAT ARE CORRECT.  ALL THESE DEVICES ARE UNDER an APPLE ID OF * dot.com, I TRY to CHANGE SOME OF THE DEVICES TO MATCH THE RIGHT PERSON IN THE HOUSEHOLD rather than KELLY OVER AND OVER?

  HE MUST HAVE A SIM CARD [THE WAY TO CHANGE A NAME GIVEN TO A DEVICE, THIS ISN'T A SECURITY PROBLEM WHEN ALL THESE DEVICES ARE UNDER AN APPLE ID ACCOUNT?]

  For iOS devices, go to the settings of-> General-> about-> name.

  You can change there.

  For Mac OSX, go to System Preferences-> sharing-> computer name to change it.

• Should HowHow I send my resume to your laptop to an IPad. I have another laptop which is mine, but I want to take the original turned off my phone friends to put on my own?

  So I ask two questions. How can one, I send my resume to my friends laptop, my iPad? And also how to send the CV to my laptop? I have to be able to send it, but what are the steps to do it?

  No doubt you have email on your iPad? Just send by email.
  Or upload to Skydrive and download on the iPad - the possibilities are endless...

• model Envy 15 - which is mine?

  I am trying to record my HP Envy 15 laptop and can not know what model it is?

  Do you know how can I tell what model I have?

  Hello

  See the guide on the following link to find out how to locate your model number either. or product number

  http://support.HP.com/us-en/document/c00033108

  Kind regards

  DP - K

• Internal tape drive SAS Dell PowerEdge T320/T420

  Hello

  I am installing a SAS LTO4 tape drive in a Dell PowerEdge T320 Tower Server.  I have the tape drive and the controller/HBA H310 SAS for the connection to the drive but I can't find the right cable for the H310 training. #

  I'll use P/N: 606JD, which is listed on the TBU for T610/T710 cable but don't know if it's the cable for this unit.

  Any help would be massively appreciated.

  Thank you

  Hello.

  Need you Cable Mini SAS to part number: J7KJW.  P/N: 606JD cable is not compatible with T320/T420

• PowerEdge R230 add RAID controller

  Need advice: the goal is to add Dell PowerEdge RAID Controller H330 server Dell Poweredge R230.

  Originally, the data connection is to the motherboard with a mini SAS connector, power cord is related to the Board of Directors itself as well go with a connector 6-pin. Given that the new RAID controller has a different SAS (SFF8644) mini connector, I can't use the original cable.

  So try to solve that I bought 4 X SFF-8482 SAS a cable - Mini SAS SFF 8643. It would connect the RAID controller for readers. (THIS)

  I also added a power cords: 4 Pin IDE power Molex 1 male to 3 x female Splitter & 2 x 4-pin Molex to 6-pin PCI-E adjust Power Supply Cable (THIS) and (THIS). It was supposed to feed readers - but is not and they won't turn on.

  No idea why? Other ideas of ways to solve this problem?

  Thank you

  IB - EN1

  1. initially, I understood the topology based on the information on the user manual, see the attached figure describing Cabling two 3.5-inch hard drives 'to the PERC card. Isn't this relevant?

  The information I had previously provided are based on the wiring of the Controller PERC H330 with basket 4 x 3.5 "which I assumed you had based on your notes. Thanks for your clarification and ignore these P/Ns. Here are the cables you need.

  • Signal and cable LED to P/N 6R7VT the H330 controller to connect to the motherboard
  • Cable SAS junction A H330 for 2 hard drives or optical drives, P/N TTN3V
  • Hard/optical drive power cable from the system board P/N N9P7R for 4 HD (shipped with your server. Use only 2 connectors) or P/N VXR2 for 2 hard drives.

  IB - EN1

  457CH, TWV59, 6R7VT: I can not find an any of them on the dell Web site, you can share links?

  I would recommend that you directly contact Dell sales in your area.

  Thank you.