Which cable Firwire

Similar Questions

• Tecra M11: Which cable to connect to a HDMI TV

  a few quick questions,

  1 should. which cable I expect to connect my laptop to tv HDMI preference?
  I only have a mini port something and a SATA Sockets...

  2. I would try to use my laptop for the fax however there is no modem can I buy one?
  What exactly should I buy if yes? cause I don't have the phone jack to connect a telephone line...

  Help a docking station? who is in the docking station?

  Thank you
  Etty

  Which Tecra M11 you exactly (M11 - xxx)?
  I just want to check which video ports are available on your laptop.

  Akuma is right. If you are looking for an external solution (USB or ExpressCard Modem), but Internet slution is also very good option.

• Hi, come the E15 Aspire. Which cable HDMI should I expect?

  Hi can someone Advisor, which HDMI cable, I should get, in order to connect to my TV. ?

  HDMI 1.3 and higher.

• Printer LaserJet 4100: Should which cable I for Laserjet 4100 connected to the laptop with USB port

  I have the HP Laserjet 4100 printer. I bought a new laptop with USB ports.  What type of printer cable I need to connect the printer to my laptop? Is there some kind of printer cable adapter, or something else that will do the trick?

  I have the same question about my HP Laserjet 1100 printer.

  Thanks in advance for your assistance expected.

  If I remember correctly, the 1100 uses a cable "C", alias MicroCentronics.  Have never seen an adapter for that one.  On the 4100, you can get a USB to parallel adapter.  They are pretty cheap and available at most CESS (Consumer Electronics Super Store) as Best Buy.  Staples and OfficeMax/Office Depot should also wear.  Online is cheaper if you have time to wait.

  The thing with these USB converters is often must 'install' the cable first.  In other words, connect it to the laptop, then wait so he could install, then connect the printer.  Depending on your operating system and if you have correct updates that can be almost instantaneous, and you may not even see it pop on the screen.

  Best idea is that since these are obviously not portable machines, connect them to your router via a network card.  I had the 1100 years and used a cheap 170 X.  I know most recent are available which are faster.

  For the 4100, see if you can retrieve a Jet Direct 620 unit on eBay.  Probably less than $50 and sometimes even as little as $25.  Stay away from the 600, 510 or 615 cards.  Low or as the 600, they can leave your network open to hackers.  No need to get Gigabit cards as they will be well above what the 4100 can handle.

  Now, two of these old devices, processing power and memory can be a problem.  Never try to print documents online.  Save them on your laptop, and then print.  You will probably get communication errors if you print directly from IE or FireFox.

  If the 1100 does not die, not even worth fixing.  Put into a Fuser is a nightmare.  The 4100 will probably work for another 20 years if you keep to clean and replace the rolls before they cause jams.

• Which cable Mini SAS to PE T410?

  Hi all!

  I have a T410 (six 3.5 "LFF-exchangeable hot racks) EP that came with archaic PERC 6i controller. I want to replace this controller with something more recent like an Adaptec 6805 or a H700/710 Dell who operate mini-SAS SFF-8087 connectors, but I fight with the SAS cables.

  I tried with a few generic standard MINI-SAS cable Mini SAS (Foxconn) which for SAS has but for SAS B causes an error message ("storage SAS B cable is not connected or is loose."). Swapping the cables does not move the error, and cables work fine in another server (HP) so I guess I need a special cable from Dell to avoid the error.

  However, since Dell has gone to the extreme to discover the correct references such as diifcult as possible, my question to the people here, is if anyone knows what Dell SAS cables work properly in the T410 and what are the part numbers.

  Any ideas?

  Hello

  I'm not aware of what owner with our SAS cables. I used generic cables on the H700 to my personal study. This is the cable for our cables reference numbers:

  Elementary school: M400M
  High school: P215M

  Thank you

• Satellite 5200 701: which cable should I connect to PJ2 port on motherboard

  Hello world.

  Currently, I am trying to fix a laptop Satellite 5200 701. The keyboard and touchpad are both dead but see the place in the Device Manager.

  When I opened the folder, I found the motherboard has an empty on port marked PJ2.
  When I looked in to it that I discovered that this is a port to connect a cable that feeds power to the keyboard, so I think that's the problem.

  My problem is trying to find out what wire should be connected to it and what another port.

  If someone could help, I would be grateful.
  Thank you very much.

  Hello

  How can you come to the idea that the keyboard needs some extra internal powersupply? The keyboard has only one connector that is important, and this is the connector of the KEYBOARD. Only this and nothing else.
  If there is an empty port then it has nothing to do an extra wire must be connected or whatever.

  Another thing: If the keyboard and touchpad appear in Device Manager then why they do not work? Didn t you think a software framework could be the problem? Please try another operating system, a linux live CD might be a good choice to make sure that the keyboard and the touchpad are really not work.

  Simply reconnect the keyboard and then try a linux live CD (knoppix would be a good choice, but you can also try ubuntu) to check if it work s.

  Welcome them

• Which cable shoud I use between perc h700 and F678M bottom of basket R310

  install a h700 to my server r310 for 4 x, 3.5sas raid5 planning table

  but not sure how to connect h700 with F678M

  Sorry for that google translated English lol

  Lx100.

  You will need cable Mini SAS of P/N N262J for the connection between the controller and the motherboard.

  Let me know if you have any other questions.

• HP Officejet Pro 8620: Which usb cable I can buy?

  Plan to buy a HP Officejet Pro 8620.  Description indicates that the USB cable is not included. Which cable USB should I buy?

  Hello:

  You need a cable like this...

  http://www.Amazon.com/ReadyPlug%C2%AE-cable-OfficeJet-printer-A7F65A/DP/B00L8OZL8S

• Which LCD cable for laptop HP DV7 4020sa

  Hi, I have a difficulty to determine which cable I need for my computer HP DV7 laptop 4020sa.

  The serial number of the device is {content removed}, and the LCD cable has a tag with "replace with HP spare...". 605324-001 "and"7F1074"below.

  I tried speaking with HP direct and received the wrong information about the part I need. They said that I needed part number 71CI0832001 with 480449-001 below.   I bought this article and concluded that, although the two are cable of the lcd screen, they have completely different connectors.

  Either way, the cable must be replaced because he was stuck against the leg that is used to tighten the body! It has generated a huge amount of heat and melted the paw and burnt the cable!

  If anyone has any information, I would be very grateful, and it can restore my very low opinion on defects of HP and very poor customer relations

  Thanks in advance

  Steve

  I did some research and according to your maintenance manual, the part number is 605333-001, look on page 72.

  http://h10032.www1.HP.com/CTG/manual/c02642701.PDF

  Yours is an LED screen and there is no ups, so the cable will be thinner then the person using an inverter.

  Here is a picture of e - bay for reference.

  http://CGI.eBay.Ph/WS/eBayISAPI.dll?ViewItem&item=300486312385

  It is also strange that when I googled the part number which is on your old cable he refers to all of the LED screen.

  If you look on page 68 of the manual it mentions that part number 605324-001 is a replacement of the screen.

  The they gave you is for a backlit display for a CCFL lamp with and the inverter.

  http://www.impactcomputers.com/480449-001.html

  http://h20141.www2.HP.com/hpparts/Search_Results.aspx?mscssid=08568760B8124A33B9679669BA127BE9&SearchIn=PartNumber&SearchPN=605333-001  It should be correct.

• Cable/adapter for use of 2007 iMac as a display for 2009 MacBook Pro

  I would use my older iMac as a monitor for my MacBook Pro. Want to know which cable and/or adapter I need help.

  The iMac is a 24 inch, Intel based since 2007 (6.1). 2 GB, 667 MHZ.  It uses iOS 10.5.8. Its port is a Mini-DVI video output.

  The MacBook Pro is a 15-inch (5.4) 2009. 4 GB, 1067 MHZ. It uses iOS 10.11.6. Its port is a Mini display port.

  Popular Wizard. Thank you.

  You must use a wireless or Ethernet connection and configure Virtual Network Computing. A 2007 iMac only supports video-, and cannot function without the standard display cable.

  (145067)

• best cable put in place for mac mini end of 2014 2.6 G 8ram graphics intel 1 to HD for dell p2725Q

  you want to plug end of 2014 2.6 mac mini 8ram for dell p2715Q which cable works best?

  A cable with a mini displayport on each end. The monitor has a mini displayport to entry and you plug the other end into one of the Mini Thunderbolt port.

  Note that your Mac will get 30 Hz to 4K

• Satellite Pro A300 PSAJ5C - power cable is broken

  Power of PSAJ5C 00J00W of my Satellite Pro A300 cable is broken. Which cable buy to replace?

  Do I need to buy a special model or simply a Toshiba cable?

  Thanks for your help!

  Hello

  Do you mean the adapter?

  I advise to use original Toshiba adapter because evil or not compatible adapter can damage the motherboard or would have an impact on the functionality of the laptop.

  Check the part number of your old sector and google for this adapter usually some online dealers should provide such part otherwise you can get in touch with a Toshiba ASP in your country to get compatible part.

  The specifications are: DC 19V 6.32 A (part PA3290E-3AC3 number)

• Qosmio G20-139: What cable I need to connect a 5.1 system speakers?

  Hi all

  Does anyone know which cable or connector, I need to connect my Qosmio g20-139 to a 5.1 system speakers?

  I searched the forum and it seems that someone has used a "optical cable Toslink" - check link below:

  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=3665

  Anyone successful with this? Can someone please give me a link to a place I can buy something that works? (I put 'Toslink optical cable' in google and it gives like 1 million different things!)

  Thanks for your help.

  Chris

  Hello Chris

  I found a useful site on the required cables.

  Check out this link.
  http://www.mycableshop.com/2nd_Cat/Toslink.htm

  You wondering where you can buy these cables. I put t know you came but I m sure that every good PC or reseller of audio accessories can sell you these cables.

• Should what cable I plug my Satellite P200-155 to a TV?

  For a while thinking about it but I don't know which cable is that I need? Thanks for the help!

  According to specification for laptop, your laptop has a S-video port, so what you need is S-video cable.
  Of course, it also depends on your TV.
  Your TV has S-video port too?

• Tecra A3 - for setting lamp on motherboard cables?

  Hello

  I can't find where to attach the blk and white wires on the motherboard of a Tecra A3.

  The cables seem to have sheets on the end, and for the life of me I don't see where the editing.

  Can anyone help?
  TKS, Paul.

  Hello

  Don t know which cable you mean exactly, but a cable black and white can be a WLan antenna.
  This WLan antenna must be connected to the WLan (miniPCI) module.
  But if your A3 does not contain an internal WLan module, you cannot connect this cable.