Which Service Packs I have install during the installation of operating system?

Similar Questions

• Qosmio F30-114 - a problem with the installation of operating system

  Hi all
  I have a problem during the installation of operating system from the recovery disk (Win XP Media Center Edition).
  After loading the disc, I seen the installer welcome window, set up all the parameters in it and pressed the OK button.
  After that, an error has occurred (in a black console window):

  Check the type of partition MBR
  Not FOUND: Partition ID 4 is 0x00 not 0 x 88
  Seeking the TMBR
  No found TMBR!
  Fact.

  Microsoft DiskPart version 5.2.3790.1830
  Copyright (C) 1999-2001 Microsoft Corporation.
  On computer: MININT-JVC

  Disk 0 is now the selected disk.

  Services of disk management cannot complete the operation.
  Specified drive does not exist.
  ERROR: E:\04629R01 Reco-unpacking. TPA has failed!
  Press a key to continue...

  After reading this message and pressing a computer key restarts and that's all that happens.
  Also I can not install another OS (Win 7 for example), during the last part of an installation, I get a message "the work cannot be completed.".

  That's happened? I don't understand what is the reason for this problem. I was reinstall another OS (the drive recovery too) often earlier and everything was OK.

  You can install WXP using the Microsoft installation disc?
  Set the BIOS on the settings by default and to use the recovery disk again.

• Do I have to get the 64-Bit operating system?

  My laptop has a 64-bit processor. I plan to put Windows 7 on it. My question is that I have to get a 64 bit version of Windows 7? Is it necessary or can I put regular Windows 7? My reason for asking is that I can't find a 64 bit Version. Unless it's an option selected during the installation of Windows 7? Thanks for any help.

  On Saturday, February 12, 2011 13:35:16 + 0000, MissADD wrote:

  My laptop has a 64-bit processor. I plan to put Windows 7 on it. My question is that I have to get a 64 bit version of Windows 7?

  No. 64-bit CPU can run 32-bit or 64-bit Windows. But a 32-bit
  CPU can run only 32-bit

  Is it necessary or can I put regular Windows 7?

  Is not 64-bit vs "ordinary". It is 64-bit or 32-bit.

  My reason for asking is that I can't find a 64 bit Version. Unless it's an option selected during the installation of Windows 7? Thanks for any help.

  It's not exactly an option, but when you buy a copy of Windows retail
  7, it comes with two DVDs, one for 32-bit and one for 64 - bit. But note
  you get a license, you can use either, but not both.

  And also note that it is a forum for Windows Vista. In the future, please
  Ask in the right place.

  Ken Blake (MS-MVP)

• "Not enough space" error windows install during the installation of Windows vista SP2 software

  Original title - cannot install Windows Installer 3.1 on Windows Vista Home Edition

  I use windows vista home with service pack 2 installed. I have a custom made software. Before installing this software, I need to install 4 i.e. cystal reports, dotnet, report viewer and Windows Installer 3. I was able to install the first 3, but the windows installer fails, it is said to be "saturated". I also tried MSI 4.5 but of no use. My software runs well on Windows XP. The interesting thing is that I return this software a year and I installed it on vista and it worked fine. Now I have re-installed windows vista on my computer and had updated. Now this problem. Could there be a reason why some update to windows vista, I installed now wasn't there last year that causes the problem. Can anyone help.

  Hi tbilal22

  
  Windows Installer 4.5 comes pre-installed with Windows Vista and Windows Vista SP1. Please refer to the article for more information-

  http://support.Microsoft.com/kb/942288

   

  It is possible that the old software, it is not compatible to be used with Windows Vista SP2. I suggest you try software installation by using the Windows Vista or XP on Windows Vists SP2 compatibility mode and check if you are able to solve the problem.

  Compatibility mode is used if a program written for an earlier version of Windows does not work properly. Then, you can use the program compatibility Wizard to change the compatibility of the program settings. To manually change the settings of a program, use the individual program's compatibility tab

  You can check the link for assistance on compatibility mode - mentioned below

  http://Windows.Microsoft.com/en-us/Windows-Vista/make-older-programs-run-in-this-version-of-Windows

   

  I hope this helps.

• Failed to install during the installation of Xp on vista

  Hi all

  I installed Vista laptop wih Dell Inspiron 1525. I tried to install Xp SP3 on another drive, but the Installer failed with a message that some files in media is write protected. Now, I'm not able to boot with either Vista or XP. I can't find any solution.

  Please help me how to solve this problem.

  Kind regards

  Naveen

  If you do not have a Microsoft Vista DVD, make a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner:http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  See you soon.

  Mick Murphy - Microsoft partner

• Must have DVDs during the installation of Oracle E-Business Suite

  Hi all
  
  I am new to Oracle E-Business Suite. I wanted to know so that we can have a successful installation of OBA, if I have the following DVD will suffice to know;
  -Oracle E-Business Suite Release 12.1.1 - StartDisk (1 DVD).
  -Oracle E-Business Suite Release 12.1.1 - Database (2 DVD).
  -Oracle E-Business Suite Release 12.1.1 - RDBMS (1 DVD).
  -Oracle E-Business Suite Release 12.1.1 - Tools (1 DVD).
  -Oracle E-Business Suite Release 12.1.1 - Appl_top (2 DVD).
  
  I know it's a very newbie question, but any help in this regard will be greatly appreciated...
  
  Best regards...

  Hello

  These DVDs should be sufficient.

  To create the directory in the stadium area, please see the installation manual.

  Installation Guide for Oracle Applications: Quick installation using
  http://download.Oracle.com/docs/CD/B53825_03/current/Acrobat/121oaig.PDF

  To check the integrity of the domain stage directory before starting the installation, please refer to (Note: 802195,1 - checksums MD5 for R12.1.1 Quick Install Media).

  Kind regards
  Hussein

• 4540 proBook s product C9K7O ID: Device Drivers not installed during the installation of Windows 7 Home Premium 64-bit

  I had to reinstall Windows 7 Home Premium 64 bit operating system and some of the equipment not recognized and therefore, the drivers were not installed. Can you tell me the correct drivers? That's what I see in Device Manager:

  Here's the driver page.

  http://h20564.www2.HP.com/hpsc/SWD/public/readIndex?sp4ts.Oid=5229456&swLangOid=8&swEnvOid=4057

  There is a full menu of Windows 7 just pull down the menu for Windows 7 Home Premium 64 bit drivers.

  The Base system is the JMicron card reader.

  Ethernet is Realtek gigabit

  USB is Intel USB 3.0

  1 unknown is 3D Driveguard

  2 stranger's validity

• How can I get the operating systems for 5 laptops that had removed the hard drives? Do I have to buy the newest Windows operating system?

  Original title: do I have to buy new systems of microcsoft

  I recently purchased 5 computers of portable hard drives had been removed from some of them have the stickers from microsoft on them that I have to buy new systems of microcsoft or can I get a copy of operating systems because they are already paid by gsa

  Contact the manufacturer of the laptop computer and ask for help.

• Update portable drive to SSD, problems with the installation of operating system and recovery system

  Compaq Presario CQ71, (model CQ71-317EA) portable system, Windows 7 family 64 - bit edition

  Hi, I tried to upgrade the original 320 GB HDD to a 256 GB SSD.

  After that replacement of the naked NTFS hard drive to SSD format, I tried to do a "factory restore" using the DVD, I created some time ago about recovery. The DVD started and recovery program ran very well, first menus for recovery/system control etc. The problem is that the program would not be allowed a resumption of the plant as the HDD was little different/more than the installed hard drive to factory.

  This is the point I'm stuck at, I reassembled the original hard drive while I find a solution.

  Is it possible to find a workaround to avoid having to order a new disc of Windows 7? Any help and advice in terms of simple-ish would be greatly appreciated. Thank you.

  Bagpuss

  Hello:

  If you can still read all 25 characters of the product key of W7 on the bottom of your laptop, you can make your own plain W7 x 64 Home Premium installation media and use the product key to activate the installation.

  Download the applicable version of the W7 from the link below.  Use the SP1 media files regenerate.

  http://forums.mydigitallife.info/threads/14709-Windows-7-Digital-River-direct-links-multiple-languages-x86-amp-x64/page59?p=470600&viewfull=1#post470600

  Then use this tool to transfer the ISO file downloaded on a key USB 4 GB or DVD.  The tool will make the DVD or drive bootable flash as well.

  http://www.microsoftstore.com/store/msusa/HTML/pbPage.Help_Win7_usbdvd_dwnTool

• Can I just create a virtual machine with the installation of operating system and Application in an external drive?

  People,

  Hello. I use VMPlayer to install virtual machines a few OS in my laptop.

  Because my laptop's hard drive space is not enough to create a VM more to install Oracle Linux and its Application, can I just create a virtual machine in my laptop and then install Oracle Linux and its Application in an external USB disk?

  You can create and save the Virtual Machine in any place that you have read & write access to and enough space to support what is being installed.

• Why does my system said service pack 1 is installed, but he always tells me to install an important update that? service pack1

  my system downloaded and installed service pack 1, yet auto update keeps popping up telling me to instal it?

  Hi Jerry,

  1. How have you installed service pack 1 before? Is it through Windows update?

  2. have you checked the Windows update history?

  Check if the Service pack is already isntalled on the computer. Follow the steps.
  1. Right click on "computer".
  2. In the system of the Details check if section Serivce pack is mentioned.

  If the Service pack is not installed, then you can download the stand-alone package for Service Pack 1 and install.

  See the article to download the stand alone Service Pack 1, and then run the installation.

  Windows Vista Service Pack 1 five language standalone (KB936330)
  http://www.Microsoft.com/en-US/Download/details.aspx?ID=30

  You can verify if the service pack is installed in Windows update history.

  Reference:

  See the Windows updates are installed

  http://Windows.Microsoft.com/en-in/Windows-Vista/see-which-Windows-updates-are-installed

  Hope this information helps. Response with status so that we can help you.

• An error occurred during the installation of microsoft install (MSI)

  Original title: an error occurred during the installation of microsoft install "during the installation of the Simulator professional siemens step 7.

  at the beginning of the installation process of professional Simulator of Siemens step 7 it told me to install MS for the installer; After agreeing to install it I have faced this problem as shown in the link

  http://Desmond.imageshack.us/Himg689/scaled.php?server=689&filename=13910106.jpg&RES=landing

  Hey Sheriff,

  -The program-specific question is?

  I would suggest trying the following steps and check if it helps.

  Method 1: Check if the Windows Installer Service is present and running on your computer.

  a. click Start , click RUN.

  b. in the run line, typeservices.msc and press to enter.

  c. find the Windows Installer Service.

  d. right-click on it and click on Properties.

  e. set Startup type to Automatic , and then Start the service.

  Try to install the software once again and check.   If the Windows Service install is not present or it cannot be started, then follow method 2.

  Method 2: Follow the steps in the Microsoft Article virtue and check following.

  "Windows Installer service could not be accessed" error when you try to add or remove a program in Windows XP or Windows Server 2003 http://support.Microsoft.com/kb/315346  

  For reference:

  Error message "the Windows Installer service is not be available" when you try to install Office

  http://support.Microsoft.com/kb/324516

  Let us know the results.

• can not get netframe work 3.5 service pack 1 to install always get an error code ox643

  I have a hp windows xp x 86(32 bit) media center 2005, I tried for about 3 to 4 weeks to get to dragon speaking naturally premium to install on the computer > it will not install because it says I have to install netframe work 3.5 SP1 in order so that he can install it. . When I try to install the netframe 3.5 I get a code error message 0 x 643. Is it possible to get the netframe work 3.5 service pack 1 to install when the netframe who entered the computer is part of the operating system. I tried to eliminate the netframe 1.1 work with the system, but also many other programs is tied to it and would not be able to serve.

  HELP PLEASE!

  When installing updates using Windows update or Microsoft Update you may receive error 80070643 0 x or 0 x 643
  http://support.Microsoft.com/kb/976982

  If necessary:

  Order of relocation:

  1. .NET framework 3.5 SP1 (this will install the .NET Framework 2.0 SP2 and 3.0 SP2)
  2. .NET framework 1.1 (if you have all the programs installed in need, this blog helps you decide whether or not you need)
  3. .NET framework 1.0 (if you have all the programs installed in need, this blog helps you decide whether or not you need)
  4. .NET framework 4

  For more information, please visit: http://blogs.msdn.com/b/astebner/archive/2010/12/22/10108400.aspx

• Windows vista service pack 1 (KB936330) keep offering re installation...

  Im trying to set up a wi - fi router and it wouldn't let me software Ciscoconnect coz they need me to update my windows vista service pack 1. I did the installation several times and said successful but want to always update me the same thing again... does anyone have any idea with this? hope someone could help me... Thank you!

  Hi, Macy,.

  I can understand the situation and I'm here to help you help you with the problem.

  I suggest you to refer to the advice given by Anoop P K on July 8, 2012 and check if it helps.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update/i-can-not-seem-to-install-Windows-Service-Pack-one/41970218-4962-449c-bd6b-66df6a0486db

  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you should reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  See also the suggestions provided by Kevin D Souza July 4, 2012 and check.

  http://answers.microsoft.com/en-us/windows/forum/windows_vista-windows_update/vista-service-pack-1-says-installed-successfully/6c5c2219-9c7e-4380-bfe1-9298cb25dc91?msgId=aec5205c-0f32-4c93-b55d-fbbd30258899

  Registry warning

  To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/)

  How to back up and restore the registry in Windows

  If the problem persists or you have any other questions, do not hesitate to let us know. It is our pleasure to be of service.

  Thank you.

• BEX errors during the installation of the software/program updates

  I have recently upgraded to an SSD and a new drive hard on my PC and thought, everything was going well until I started to reinstall and update my old programs, where I keep coming across mistakes BEX I can't work around with my computer DEP settings. When I try, I get an error message stating, "this program must run with Data Execution Prevention (DEP) enabled. You can't turn off DEP for this program.

  Is it possible that I can get around this error in order to update my programs, or am I stuck with the ever-growing list programs I can is no longer updated accordingly?

  - - - - - - - - - - - - - - - - - - -

  Signature of the problem:
  Problem event name: BEX
  Application name: whql-radeon-software-crimson-edition-16.1-64bit-win10-win8.1-win
  Application version: 0.0.0.0
  Application timestamp: 54336eaa
  Fault Module name: ltc_game32 - 106568.dll
  Fault Module Version: 1.0.0.1
  Timestamp of Module error: 566 b. 4799
  Exception offset: 000aaf89
  Exception code: c0000417
  Exception data: 00000000
  OS version: 6.1.7601.2.1.0.768.3
  Locale ID: 1033
  Additional information 1: 7ba8
  More information 2: 7ba8a4bc43675385b12d0091164f5b9a
  3 more information: 3b 02
  Additional information 4: 3b02768676ca2422774930b07cabbc60

  Signature of the problem:
  Problem event name: BEX
  Name of the application: 1_CyberLink_PowerDirector14_Ultimate_Upgrade_VDE150831 - 02.exe
  Application version: 0.0.0.0
  Application timestamp: 4fd34d75
  Fault Module name: ltc_game32 - 106568.dll
  Fault Module Version: 1.0.0.1
  Timestamp of Module error: 566 b. 4799
  Exception offset: 000aaf89
  Exception code: c0000417
  Exception data: 00000000
  OS version: 6.1.7601.2.1.0.768.3
  Locale ID: 1033
  Additional information 1: 7ba8
  More information 2: 7ba8a4bc43675385b12d0091164f5b9a
  3 more information: 3b 02
  Additional information 4: 3b02768676ca2422774930b07cabbc60

  Signature of the problem:
  Problem event name: BEX
  Name of the application: 2_CyberLink_PowerDirector14_ContentPack_Essential_PCP150526 - 06.e
  Application version: 0.0.0.0
  Application timestamp: 4fd34d75
  Fault Module name: ltc_game32 - 106568.dll
  Fault Module Version: 1.0.0.1
  Timestamp of Module error: 566 b. 4799
  Exception offset: 000aaf89
  Exception code: c0000417
  Exception data: 00000000
  OS version: 6.1.7601.2.1.0.768.3
  Locale ID: 1033
  Additional information 1: 7ba8
  More information 2: 7ba8a4bc43675385b12d0091164f5b9a
  3 more information: 3b 02
  Additional information 4: 3b02768676ca2422774930b07cabbc60

  Hello

  Thanks for posting your query to the Microsoft forum. I will definitely help you with this.

  I understand that you have problems during the installation of the software. This problem is possibly due to several reasons such as security software that can be installed on the computer, any program or application that is running on the computer on the bottom, or due to some errors on the hard drive of the computer.

  Method 1: Run the clean boot

  Place your system in the clean boot state helps determine if third-party applications or startup items are causing the problem. You must follow the steps in the article mentioned below to perform a clean boot

  How to perform a clean boot in Windows

  Note: See "How to reset the computer to start normally after a boot minimum troubleshooting" to prepare the computer to start as usual after a repair.

  Method 2:

  Please see the advice given in the link given by Shinmila: 28 March 2010:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-gaming/cannot-disable-DEP-for-certain-programs/d5352d1e-11AC-4254-ad3f-c0ecb85311f0

  Let us know if you need more assistance. We will be happy to help you.

  _________________

  Thank you best regards &,.

  Isha Soni