Similar Questions

• What table stores the published/unpublished indicator for items assigned to any section in iStore

  Hi all

  I want to know what table stores the published/unpublished indicator for items assigned to them sections to iStore?

  According to my understanding:

  When any item of inventory is assigned to any section we have given in to this inventory_item_id ibe_dsp_section_items.

  This board just have the start_date/end_date and tell me if the article is published on the site

  There is an another table ibe_dsp_msite_sct_items which shows what minisites element is available.

  This board just have the start_date/end_date and tell me if the article is published on the site

  We can always go to responsibility administrator iStore

  Merchant iStore > > catalog > > Products > > summary

  search for any item and it shows the item was attributed to what all the sections.

  Here, we have a button "change published Flag." This can be used to publish/not to publish articles on all sections.

  I want to know what table is updated when we hit this button.

  Thanks in advance!

  Thank you

  Shashank

  Hi all

  I got the answer.

  This button updates the

  MSI.web_status

  Just thought that answer here in case it helps anyone.

  Thank you

  Shashank

• ODI table to the stages of extraction KM and options

  Hello

  I'm looking for internal tables ODI as SNP_ * tables, where I can get information of name of steps and options inside particular KM.

  Any help would be appreciated.

  Hi Prashant da Silva,

  You use g 11 or 12 c?

  Here are two applications tested on 11g that could help you create an MDX query:

  Search for text to the command of the target of a KM stage (here) and see all interfaces that use it:

  SELECT proj.project_name, folder.folder_name, int.POP_NAME interface_name, km.trt_name ikm, km_step.sql_name, km_code.full_text
    FROM SNP_PROJECT proj, SNP_FOLDER folder, SNP_POP int, snp_trt km, snp_line_trt km_step, snp_txt_header km_code
    WHERE proj.i_project = folder.i_project
      AND folder.i_folder = int.i_folder
      AND km.i_trt = int.i_trt_kim
      and km.i_trt = km_step.i_trt
      and km_step.def_i_txt = km_code.i_txt
      and UPPER(km_code.full_text) like '%MINUS%'
    ORDER BY km.trt_name, interface_name, km_step.ord_trt;
  

  Find KM using an option (here FLOW_CONTROL) and all the interfaces to use:

  SELECT proj.project_name, folder.folder_name, int.POP_NAME interface_name, km.trt_name ikm, opt.ue_name option_name, int_opt.short_value, int_opt.i_txt_value
    FROM DEV_ODI_REPO.SNP_PROJECT proj, DEV_ODI_REPO.SNP_FOLDER folder, DEV_ODI_REPO.SNP_POP int, DEV_ODI_REPO.snp_trt km, DEV_ODI_REPO.snp_user_exit opt, DEV_ODI_REPO.snp_ue_used int_opt
    WHERE proj.i_project = folder.i_project
      AND folder.i_folder = int.i_folder
      AND km.i_trt = int.i_trt_kim
      AND km.i_trt = opt.i_trt
      AND int.i_pop = int_opt.i_instance
      AND opt.i_user_exit = int_opt.i_user_exit
      AND opt.ue_name = 'FLOW_CONTROL'
    ORDER BY km.trt_name;
  

  Kind regards

  JeromeFr

• Name of the IKM ODI Table with the name of the context

  Hi all

  I was breaking my head to remove the name of the context and use it as a patch post the name of the table

  INSERT INTO < % = odiRef.getSchemaName ("SOURCE_STAG", "D") % >. TEST_CONTEXT

  (

  CONTEXT,

  SYS_DATE

  )

  VALUES

  (

  "TEST_ODI_TABLE < % = odiRef.getContext ("CTX_NAME") % > ',

  SYSDATE

  )

  ====================================================

  < % = OdiRef.getContext ("CTX_NAME") % > = DEV_CONTEXT_XXX

  I want the table name as: TEST_ODI_TABLE_XXX

  Means

  DecaXD wrote:

  Hello

  the simplest way is to command INSTR

  SUBSTR ('<%=odiRef.getContext("CTX_NAME")%>', InStr('<%=odiRef.getContext("CTX_NAME")%>','_',1,2) + 1)

  Let us know

  Can you show how it worked for you?

  Salvation in Mali,

  Use under substitution API and let me know in case of any problems.

  for example

  create the table MYTAB_TEST_

  (

  CONTEXT varchar2 (50).

  SYS_DATE varchar2 (50)

  )

  Chantal

  http://dwteam.in

• What table stores the filters Interface repository work

  Hello
  
  I have a number of simple interfaces 1 to 1 (1 source, 1 target). And each interface has its own filter between source and target.
  
  I would like to know how these filters are stored in the database of working repository.
  
  I can see the filter text in TXT SNP_TXT field. But I would like to be able to extract the name of the source table, the name of the target table sort and filter in a text query.
  
  It seems to be a myriad of cross of identification numbers referenced through many paintings to achieve this. Its all very confusing trying to keep ID numbers in a source and target table.
  
  Is there a documentation telling me how working repository database tables are cross referenced?
  
  Thanks in advance,
  N

  I responded to this in one of the previous threads:
  Re: trying to find the join condition

  Hope that helps

• What table stores the name of the region, the IDs and details?

  Hello
  Pls know me this table where are stored the names and related info.
  
  Kind regards
  IDEOGRAM

  Hello

  You can see all the workspace Apex views
  Home > utilities > Application Express views

  And you can search by entering filed 'region '.

  If you want to see how it is build go schema Apex and
  See for example APEX_APPLICATION_PAGE_REGIONS dll that contains the region info

  BR, Jari

  Published by: jarola 4 November 2009 14:18

• ODI procedure stores in which SNP table

  Hi all

  Can someone help me please in which SNP procedure ODI table will store.

  I'll give clearly at all, if you have created the variable ODI in studio ODI then store the information in SNP_Variable and store details logic diagram in table snp_lschema and details scenarios will store in the snp_sess table as wise, if you create an ODI procedure in the studios of ODI which SNP table it will store.

  Currently Iam using the 11g (11.1.16.0) ODI version in windows 7, 32 - bit architecture.

  Kind regards

  Phanikanth

  Give a look at SNP_TRT and SNP_TRT_STEP. Don't forget to filter the TRT_TYPE...

• Way to know which table APEX stores the data of particular application?

  If, for example, I went to the shared-> components Templates-> change the Page template
  and I want to know what APEX table stores the data that is displayed on this page in the definition-> header section
  is it possible to do?
  
  In this particular case, I would like to ask all requests for one ' < link rel = "stylesheet" ' string
  
  Any guidance would be GREATLY appreciated

  You can find it in every application > utilities > APEX views > APEX_APPLICATION_TEMP_PAGE. You must connect this point of view the point of view of APEX_APPLICATION_PAGES in order to get this info.

  Denes Kubicek
  -------------------------------------------------------------------
  http://deneskubicek.blogspot.com/
  http://www.Apress.com/9781430235125
  http://Apex.Oracle.com/pls/Apex/f?p=31517:1
  http://www.Amazon.de/Oracle-Apex-XE-Praxis/DP/3826655494
  -------------------------------------------------------------------

• Unable to add a new column to the table of the LCD? Option, just usually add it.

  I have a form of LCD with a table in it. Im trying to simply add a new column to the table. The option is there, but the column appear just after clicking Add the column to the left. I selected a column, right click the space > insert > column to the left. But the habit intsert. The object table properties tab shows lines and colum numbers, but they are grey.
  
  See screenshots:
  
  http://www.emermed.NET/staging/forums...
  
  http://www.emermed.NET/staging/forums...
  
  It is a dynamic array, where a new line can be inserted using a button. Is that the dynamic nature of the question? ID hate to cancel all the flow dynamics and programming just to add a column, and then reapply them all.
  
  Thank you!

  Hello

  You do not add the columns in the object > palette (screenshot 2) of the Table. I suspect that the problem is that it is not enough on the page (in the content area) to add the column. In the screenshot 1, if you look at the width of the column highlighted from the space to the right of the table, you will see that a column can be added due to restrictions of space.

  Reduce the width of the column highlighted (temporarily), and then add a column. Once added, you can resize the columns to match the width of the page.

  Hope that helps,

  Niall

• Tables on the skills to OLM

  Dear all,
  
  What table stores the value of 'Update skills inherited settings' offering in the management of learning...
  Also... what table stores the status of player registration...
  
  
  Waiting for a quick answer
  
  Thanks in advance

  Hello

  It's simple it know, click on 'about this page' on the left hand side bottom of page and develop all seek View object that has a field you are looking for. If you do not see "about this page" activate Self Service Personilization profile options '% definition', then check here... you will get all the information you need.

  See this link for details of 'about this page'

  http://apps2fusion.com/apps/OA-framework/456-iExpenses-OA-framework-R12-extensions

  Thank you
  Charlene

• Deletion of the tables of the ODM

  Assuming that I am done with my project parts (for example, classification), it is OK to delete tables such as those starting with DM$ P * CLAS, etc.?

  When is it OK to remove the tables starting with ODMR$?

  Hi Cindy,.

  If you use Data Miner then cleaning can be done automatically.

  If you remove a workflow Data Miner - all objects created by the workflow are deleted (as templates or tables generated by the node Create Table).

  No input source is deleted because they were not created by the workflow.

  If the workflow would both eliminate the tables/views ODMR$ (which are generated internally by ODMr in the model test results etc.) and the tables of DM$ P (which are physical tables within the model of the ODM itself).

  If you delete a node in a workflow, then objects created by this node disappears when the workflow is saved.

  If you drop the Data Miner repository, the fall process deletes all the objects thus generated workflow.

  You can also keep the workflow and physically remove all the underlying tables in the range $ ODMR but recognize that you will need to restart the workflow as always, they will be marked as complete, but the results have been removed.

  You don't really have to remove the DM tables $ P directly (see below).

  If you build models outside ODMr, the you must use the pl/sql api to abandon the model:

  DBMS_DATA_MINING. DROP_MODEL (model_name IN VARCHAR2,

  Force IN BOOLEAN DEFAULT FALSE);

  If you have a number of models to remove, you can write sql script to query the view of models of mines dictionary and use it as a driver to drop patterns.

  Hope this helps, Mark

• Name of tables listing the definitions of Web Forms row\column\POV

  All,
  
  We have some applications planning and a lot of Web forms to allow entry in varied combinations of row\column\POV. Users, it is difficult to locate the correct online with the combination of right row\column\POV form, to allow them to enter data and have to open\close a large number of Web forms before they find the right pair they need\want.
  
  I know that the relational component of a planning application includes many tables store the definitions of Web forms, etc.. I would like to know where I could find a list of the tables that contain the definitions row\column\POV of each Web forms for each planning application in order to quickly identify the correct webforms who could access their data entry of support staff.
  
  Thanks in advance.
  
  JBM

  I think the feature is available for a long time even since version 9

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Lack the option "move to".

  I have a menu pin in my master and I want my content to scroll below. After viewing a video Adobe tv what it seems I have to do is select the menu and then right click and select the option "move to" which leaves me then chose the option "Master plan".

  The problem is that I don't see that the "reorganize" and not "move to" option like in the video.  Organize the menu forwards in the master and the content down on the page does not solve the problem of the elements on the page to scroll on the top of the menu.

  Any ideas?

  Thank you.

  Slade

  Hi Sladezumhofe,

  You can use the functionality of layers of to do. Add the menu to the top layer and all other content in the other layers.

  See you soon!

  Aish

• Tables of ODI Master Rep that stores the details of work rep

  Hi all

  I want to know the details of all deposits present in an ODI installation. I think the table of the master repository will have the details of the rep of this work under him. Please let me know tables which holds the details of the work.

  Thank you

  Raja

  Hello

  The table on the ODI SNP_LOC_REPW describe the details of repositories of work that are used in the Master repository.

  Thank you

• Transpose the text column of the Oracle using ODI table

  Here's what I'm trying to do:
  Source table that contains the columns:
  Time, Blob, Item-ID
  
  The expected target has the columns:
  Time, data, Item1, Item2. ItemN
  
  1. where Item1, Item2 are as shown: say for example the source table has 10 rows of different IDS, there are 10 columns in the table target from Item1 to article 10. (Assuming that no. different IDs are fixed)
  How to do this? I learn ODI for a few weeks now. Understand the basics and terminology, I don't know how to do this.
  
  2 data (the target table) is a return value from a stored procedure that would transform the Blob (of the Source table)
  The stored procedure is ready, but how do you use the procedure to get the target to the source.
  
  Any help/direction would be greatly helpful.
  -Vincent
  
  Published by: user12397263 on December 29, 2009 23:53

  1. a question: How do you who would determine row goes to which column? You can say that the 1st line value becomes item1, but without a rank ORDER 1 will always random. If you have a way to ensure the order of the rows (say, a column that can store the rownum) then what you need is in the interface, you specify for n - th element mapping must be MAX (Case when n = rownum then point else ' ' end). Who should take care of it.

  2. There is a way to do this in ODI. Because you are a beginner, I would recommend that you create a temporary table and you use a PL/SQL block to generate data of BLOB and serve another table of the source that can update the column of data in the temporary table target table.