WHICH SSD INTERFACE?

Similar Questions

• which ssd is compatible with my laptop HP Pavilion DV7 - 1150 ev?

  I have a Pavilion dv7 - 1150ev that I bought in 2008.i think is the time to change and which is better to start than with the addition of a SSD hard drive... I bought an ssd OCZ Agility 3, but it does not recognize my system... so I wanted to know what types of ssd, if any, is compatible with my laptop.  Thanks in advance

  pedragorn wrote:

  the problem with the ocz vertex 3, first of all, I bought was that it was SATA III? so all SATA II will work? Thank you pepe999

  Disks SATA III should be used in SATA III computers. Try one of the Corsair 64 GB SATA II drives. Other brands also works, but I prefer Corsair (Corsair Memory also have).

• Which network interface is linked to a 1000th PowerEdge iDRAC?

  I have a PowerEdge server 1000th with a bunch of blades plugged and there also * six * M6220 ethernet passes over it.

  I have configured each server so that it has a separate IP address of each switch of the following subnets:

  A1 - Public IPs (111.222.333 *, for example)

  A2 - private IP address (* 192.168.10)

  B1 - private IP address (* 192.168.20)

  B2 - private IP address (* 192.168.30)

  C1 - private IP address (* 192.168.40)

  C2 - private IP address (* 192.168.50)

  Each server can ping any other server on any B B six IP addresses (so that they can all 'see' each other on all interfaces of contactors.

  In addition, the CMC interface has a public IP address, and it is connected to the A1 (the public IP switch) switch.

  Now, when I want to use the interface of the iDRAC (for access, for example, the console to one of the servers), it works * fine * (which means that I can't the user a browser on one blade to access the console of the iDRAC of any * other * blade) if I attribute public IP to the iDRAC interfaces. However, if I assign an address from any of the * private * subnets (because my public IP is rare), I'm not able to reach the iDRAC console.

  IDRAC interfaces are only related to A1 or something, or is there a reason why I shouldn't be able to reach them through other switches?

  So it seems that the iDRAC facilities use the physical interface on the CMC, not on any of the modules A1 - C2 network. Although this interface was connected to our network public IP (with our A1 network interface), I was able to avoid public IP with our iDRAC interfaces by issuing IP aliases private A1 interfaces on our blades.

• Which SSD will work for me?

  I have a Presario CQ5600Y PC and im going to be upgraded to the HHD to an SSD.

  The it works? and is it decent?

  SanDisk - More SSD 240 GB internal Serial ATA Solid State Drive

  Is what he

  http://support.HP.com/us-en/product/Compaq-Presario-CQ5000-desktop-PC-series/4269863/model/4300410

  You should have regular 3.5 "hard drive now

  East of SSD 2.5 "they sell a rack for the SSD to fit in, but you can easily just use Velcro or plastic necklaces to strapping products ssd heat very little or not at all.

  Don't forget that 250 GB is enough that they are not like discs hard you can fill almost.

  SSD is necessary during commissioning which translates into 20% free space is required for the rewrite

  It of a good thing about samsung ssd, they have a free good samsung utility Wizard to manage windows writing and eliminates most

  In addition there an easy update firmware option too

• T400 SATA and SSD interface speed

  Can someone please give me exact info on T400 to interface SATA it is SATA-I or SATA-II?

  Intel SATA controller onboard is ICH9M-E/M and this controller supports SATA-II (3 GB/s) - documentation of Intel, but in all the docs on T400 techniques it is mentioned only SATA-I (1.5Gpbs).

  I ask because I intend to replace SSD HARD drive. Normally, it wouldn't be nice to pass around a lot of money for the SSD with 230/180 MB read/write speed and experience after the replacement speed limited to 140/140 MB.

  Model T400 2765-TMD

  Win XP SP3

  yesterday, I wrote to the German support and asked if the t400 presents the transfer Cap because I would like to move on to a intel x 25-m with a 250 MB/s read speed and response came already today. They said that the transfer rate is provided entirely / is supported in full. I hope they're right.

• A module C - DAQ exists which will interface with standard RV - C?

  Module C - DAQ exists that if interface with standard RV - C (vehicles recreational CAN)? RV - C seems to be a variant of J1939 according to Wikipedia.

  I would use 9861 OR or NI 9862. I'm new on CAN protocol and evaluate some assistance.

  I've never used RV - can, but according to Wikipedia, the rate is 250Kbaud, so you'll want high speed CAN peripheral, 9862, you can set baud rate on init of the material.  After installing XNet and cDAQ software, you have a max bus monitor and several examples in the example Finder to read and write raw images.  After that, you'll want to read on the standard to understand how to format and analyze the data.

  Also if you have any questions, you can post on the Sub-forum Auto , they can probably answer more specific questions.

• I use Firefox which if interface perfectly with iGoogle, iGoogle is due to be removed, then what should I do to prepare for this change?

  I'm not a sophisticated user - do not use apps (what they are anyway?) I just want to know what to do come November when my Firefox page, well integrated with iGoogle, no longer works? Will I always tabs direct me to gmail? What about Google maps?

  App is short for "application." You hear it used more frequently as part of a mobile device, but there are also web applications that run in your browser.

  You can find a lot of sites that want to be your new home page. The best choice for you really depends on how you use iGoogle. For example, do you rely on a stock updater? weather? built-in calendar? I have no personal recommendations for you, but if you're looking for a little you will find many review and comparisons without end. For example: three alternatives to your iGoogle Home Page | PCWorld.

  Or if you think that you can just use the standard Google home page on https://www.google.com/.

• G9_592_786M SSD UPGRADE

  I already made my upgrade of ram using Rams corsair valueselect which worked flawlessly

  now I want to spend my additional location of SSD, but which model should I go for?

  There are two models that I found at the market

  M.2 850 EVO (SAMSUNG) 80

  M.2 950 PRO NVM (SAMSUNG) 110

  If someone has already tried all of the above ssd let me know

  concerning

  EDIT: I did some research on this forum (old posts)

  looks like I'll get the 850 m2 EVO, the only question is how do I adapt it as secondary housing is 110 for size? is there an adaptor or support to adapt the SSD 80? because I can't find any SSD 110

  AJ

  The G9_592 uses 2280 m2 or 22 mm x 80 mm.

  

  Check the specs on the links below.  Examples of 2280 m2 SSD (interface SATA3) in the links below.

  http://www.Newegg.com/product/product.aspx?item=N82E16820147398

  http://www.Newegg.com/product/product.aspx?item=N82E16820148956

  Make sure you have the latest version of the BIOS.

  To check your current version of the BIOS:

  1. right click on the button to start Windows

  2. left click on run

  3. type msinfo32

  4. click on ok

  http://www.Acer.com/AC/en/us/content/drivers

  Edit: Apparently, you can have two locations of m2?  One of them apparently supports m2 (PCIe and SATA gen 3 interface x 2) and apparently the other M.2 express SATA.  When in doubt, go with the SATA m2 (like those in the links I gave you).

  Edit2: Make sure that you create a disc of recovery of factory default USB (USB recovery media) before adding SSDS

  http://Acer.custhelp.com/app/answers/detail/A_ID/29934/related/1/session/L2F2LzEvdGltZS8xNDY2NDYzNjg...

  Edit3: Don't forget to remove the ODD module first (if applicable)

• Questions new installation HD SSD for MacBook Pro

  I followed the online instructions how to install the SSD for my MacBook Pro. I then rebooted by Mac in recovery mode and formatted the drive in Mac OS extended (journaled). It was a little bit tricky message sometimes giving such as erasure of disk failures, but eventually it worked. I selected to install the OS on this HD. The image of the OS were first shown on OS X Lion, but my current OS is El Capitan. I just figured that he was installing the original operating system provided with the mac. The installation went well but then we he had finished wen timer back to 1 hour, 46 minutes. He made several times and after 6 hours, I decided to leave and start over. The second time after erasing HD and formatting again the OS that came was El Capitan for installation so I continued. This time, the installation has been completed and at the end says "OS could not be installed on my computer, reboot and try again." On the third attempt has received a similar message from the failed to install ' year error occurred during extraction of the files in the package "Essentials.pkg." " »

  Anyone has any idea why this doesn't work or suggestions please?

  About 2 months ago I reformatted my HD original as installed latest OS El Capitan as the mac has been slow. Does have a report with questions I get on doing the same thing with another HD?

  What model of MacBook Pro?

  Which SSD model?

  You have another Mac?

  Possible causes:

  -Incompatibility of your Mac with this specific SSD. Recently, some users have reported what appears to be these incompatibilities

  -You damaged the cable flex between the drive and the system board.  It is a common problem and causes intermittent problems initially and if it's even worse the Mac will see is even more disk

  -You have an another hardware problem as RAM bad or other component.

  I'd do it

  -Run Apple Hardware Test

  Using Apple Hardware Test - Apple Support

  -Connect an external drive and install OSX on this disc and boot from this facility and see if you have any problems

  -If you have another Mac download a compatible OS x Installer for the Mac App Store and create a USB bootable using device

  http://liondiskmaker.com/

  and install OSX on the SSD.

  This is the Office Mac Pro forum. I asked that your post moved to the appropriate forum.

• How can my friend change his Gmail interface in Chinese?

  My friend has a Chinese OS on his computer, but uses a Gmail account in which the interface is English, because of his problems. I'm in another country, but need to help him understand how to change the interface in Chinese for an account with Gmail based in Taiwan. We are all two tech novices, so I don't know if this is a question I should ask Help Gmail or you.

  Google has its ' own support forum.
  
  http://www.Google.com/support/forum/p/Gmail?hl=en

• How to activate the Tecra R80 - 144 sata 6GBs 3 for SSD

  Hello

  I have toshiba tecra r850-144 and I ssd but it does only have 3GBs why?

  What can I do to activate the full speed

  The SSD is maybe only 3 GB?

  Is which SSD?

• HP 17-x025na: upgrading to an SSD

  I use HP 17-x025na with 1 TB of hard drive now I want to upgrade my laptop to SSD. Can I install an ssd on my laptop? Which ssd is the best choice for my laptop?

  Yes. You can install an SSD.

  They type of SSD you need is a SATA SSD.

  My preference is 850 EVO from Samsung.  A 256GB SSD with a capacity to do what you need.

  See the sticky to the laptop hardware and update the section of the forum for more information about how to upgrade to an SSD.

  http://h30434.www3.HP.com/T5/notebook-hardware-and-upgrade-questions/BD-p/hardware

• Satego x 200-BIOS does not detect SSD but windows 7 for OS usage

  need help here, I got the latest bios 2.50 and my bios does not detect the SSD but an I start windows 7 from my hard drive it is detected and I want to use the ssd as boot drive, please help

  Hello

  Which SSD drive you have exactly?
  I also think it s a compatibility problem between the HARD disk controller (motherboard) and the current SSD drive.

  So you should check if you have the latest firmware of the SSD drive and if it of possible, try another disc SSD of a friend, for example.

  By the way: have you tried to load the default settings in the BIOS?

• HP ENVY 15 t-j000: HP ENVY 15 t-j000 - replace SSD HARD drive

  Hello

  I have the HP ENVY 15 laptop t-j000with below configuration. I would like to replace the HDD with SSD. Can someone please tell me which SSD is compatible and how can replace it? Thanks in advance.

  Laptop HP ENVY 15 t-j000 Quad Edition PC

  E4T17AV

  • Windows 8 64
  • 4th generation of Intel Core i7-4700MQ processor
  • NVIDIA GeForce GT M 740 graphics with 2048 MB of video memory dedicated
  • 15.6-inch Full HD BrightView LED backlit diagonal (1920 x 1080)
  • 16 GB memory (2 DIMMs) DDR3 system
  • 1 TB hard drive 5400 RPM hybrid
  • NO hard drive Cache acceleration WSSD
  • No additional desktop software
  • No additional security software
  • 6-cell Lithium-Ion battery
  • No internal DVD or CD drive
  • Standard keyboard
  • Webcam HP TrueVision HD w / built-in digital microphone
  • 802.11b/g/n WLAN

  Your Service Manual:

  Manual

  See page 47 for hard disk access and replacement. Without the drive of the WSSD, it is just a matter of replacing the HDD with a SSD 1 TB. Cloning a larger to a smaller drive can be a bit complicated so post back if you need some help with that.

  I always recommend a Samsung Evo 850 as best consumer SSD. I recommend you get at least a version of 250 gig and preferably a 500.

  http://www.Amazon.com/Samsung-2-5-inch-internal-MZ-75E250B-am/DP/B00OAJ412U/ref=sr_1_1?s=PC&ie=UTF8&QID=1441918350&SR=1-1&keywords=Samsung+Evo+850

  You don't need to worry about any special BIOS settings or anything just to plug and treat it like any other hard drive. Many people resist the question and read articles that are a few years old at the time when you had to 'create' the system for one SSD. Not really need more.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• HP Pavilion 15 laptop: SSD compatibility

  Hallow, I want to put in place an ssd.

  My laptop laptop HP Pavilion 15, product number is K6Y21EA #ACB.

  Which ssd is compatible? The size?

  It can be done, but not easy. Here is the Manual:

  Manual

  See p. 94. You must remove the top cover, but not the motherboard. You can replace the 2.5 inches wide and 9.5 mm thickness standard hard drive with a 2.5 inches wide 7 mm thick SATA SSD. You can install a 1 TB SSD, if your budget allows.

  I recommend a Samsung 850 Evo like here:

  http://www.Amazon.com/Samsung-2-5-inch-internal-MZ-75E500B-am/DP/B00OBRE5UE/ref=sr_1_2?s=PC&ie=UTF8&QID=1448822586&SR=1-2&keywords=Samsung+850+Evo

  Post back if you need assistance with reinstalling software or anything else.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.