while I connect to my computer with the samsung wave y kies wi - fi computer displays an error as a peripheral denied connection permission, please provide the solution.

Similar Questions

• HP 6500 scan high resolution works well with the solution Center HP; but is solid black w/imgage software for editing

  I got an OfficeJet 6500.

  If I try to scan a picture at a very high resolution, using an image of image editing software will come out black.

  I can scan the image using the HP solutions, at the same high resolution Center, and the image will scan very well.

  I think there is a setting for the Windows operating system that needs to be adjusted. I know because I had this same problem once before.

  I found the solution to my problem. but my computer crashed and I had to reinstall the full Windows operating system. I lost the changes I had made. It was in January 2011.

  I don't remember when I had the answer to my problem but I thought that I asked the question in the HP forum (it would have been some time in late 2010) and then someone answered with the solution to my problem. But I can't find the post I did then.

  -My operating system is Windows 7, with a 64-bit operating system.

  -The processor is an Intel Celeron 2 .50GHz.

  I would appreciate any help someone can offer.

  Hello JimTrail

  After watching this on the web, it seems that you is maybe to something. From what I found, GIMP uses a lot of resources, especially true for larger images. He isn't able to handle the scanning of an image as large as 4800dpi without additional RAM or virtual memory to compensate for the RAM.

  My suggestion would be to increase the size to the recommended or higher. Out of curiosity how much physical RAM have you? Microsoft recommends that virtual memory for no more than 3 times the amount of RAM installed. See article: change the size of virtual memory.

  You can also see the article below on the Tile Cache GIMP.org.

  How to set your Tile Cache

• With the solution Center HP can magnify an already scanned photo?

  I have Windows 7 and the HP Solution Center.  I have already scanned photographs and would like to know if I can expand or otherwise alter these photos using the Solution Center and if so, is there simple instructions anywhere where I can get my hands on?

  Problem solved.

• To configure Group policy so that after 5 invalid logon attempts computer display an error message indicating that the account is locked out for 30 minutes

  Original title: function or Vulneralbility? [Lock Group Policy]

  Hello world

  I have Windows XP Service Pack 3 with automatic updates turned on and the protection in real time against malware.

  I use Group Policy to configure for my computer account lockout policy, indicating that the account is locked by 30 minutes after 5 invalid connection attempts. I also use the TweakUI Autologon feature. (you can ask why the account lockout is necessary when automatic login is turned on?) Hold on...). Please also note that the feature of quick change of user on my PC is off, too. (but I still use the Welcome screen)

  So, when I have already connected, press Win + L to lock my workstation. Now, I begin to grasp things at random to be used as password. So that after a few failed attempts, the system displays: "cannot open a session because your account is locked. Please contact administrator.

  However, when I entered the correct password now, the system will always connect.

  I don't know if this is a feature of Microsoft Windows or a vulneralbility.

  More information: my computer is NOT a part of a domain, it belongs to the "MSHOME" workgroup and has file and printer sharing.

  Any help is appreciated.

  Hello

  Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. It is better suited on the TechNet community.

• I've upgraded to Windows vista, but it opens to a half screen and I couldn't understand why. Can someone helpd with the solution?

  just updated my computer to a Windows vista ultimate, but it does not display a full screen. I made an update but the screen but comes back half the nothing changes.

  Hello

  Make sure you have the latest vista graphics, etc drivers for your computer which you can get from your computer or your manufacturers Web site graphics

  go to their website and look for a driver and software download section

  Enter your model number for the last look drivers vista then download and install

• Computer displays an error message that says "system has encountered a problem and needs to close."

  Original title: "system has recovered from a seriuos problem."

  I get an error message whenever I restart the computer that says "the system has recovered from a seriuos problem" and also when I click on any .exe file to restart the computer.

  Please let me know the troubleshooting I must perform

  Thank you & best regards

  Sashidara.O

  Hello

  ·         You use Windows XP or Windows vista?

  ·         What anti-virus program do you use?

  ·         Did you the latest changes on the computer before the show?

  You have posted same question twice, one in the category Windows XP and in Windows Vista, if you are facing this problem in Windows XP, you can read this article:

  A "System has recovered from a serious error" message after every restart.

  http://support.Microsoft.com/kb/317277

   

  The computer may automatically restart, or you may receive a "serious error" message or a stop error message in Windows Server 2003, Windows XP, or in Windows 2000

  http://support.Microsoft.com/kb/894278

  Follow these methods to solve the problem in Windows Vista:

  Method 1:

  I also suggest you to download and run the latest Microsoft Scanner on your computer and check to see if it helps:

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: the data files that are infected must be cleaned only by removing the file completely, which means there is a risk of data loss.

  Method 2:

  Also, try to perform the clean boot and check if it helps.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135/en-us

  Note: Don't forget to start your machine in normal mode by following step 7 of the link.

  Method 3:

  I would say as you try to perform the SFC (System File Checker) scan on your computer and check.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

   

  http://support.Microsoft.com/kb/929833

• If firefox is open so that utorrent is to use my computer will display system error and restarts. Could help you, please PS sorry for my bad English.

  I can't give any screenshot, because the system breaks down (but restores automatically). Blue screen for 1 second (not the screen of death, (or how you think the name?)).

  Hello, you probably have less than 1 G of physical memory in your xp, this is why you cannot use open all torrents and firefox.

  also all torrent clients eat a lot of bandwidth, and if you don't have much, it is a common problem.

  Search forum utorrent for a better configuration of your client, if that minimize the problem.

  Thank you

• HP mini 110 computer: System fatal error of Hp mini 110 CNU94145DN interrupted please help. Electric lock

  My HP Mini has stopped system fatal error code and I do not know the password please help

  Hello

  Please try the code below.

  e9lov3vqt9

• Allowing the pdf file to connect with the site where it was downloaded from.

  I work with WIndows 7 Home Edition. I downloaded a template in pdf format. One of the first times I had the document open, I saw a message, asking me to allow the document with the site it came from. At that time I didn't that happen so I answered "do not allow" (or words to that effect).

  Now, every once in a while I get a little window with the message that the connect permission is denied. It has two clickable buttons, they say 'ok', the other says 'help '. I would like to know if there is an option somewhere where I can now enable to connect, but if I click on 'help' I'm coming to the Adobe Web site, and for the life of me I can't find any help with that, anywhere.

  I don't know which version of Adobe Reader I have, it's a free version.

  Thanks in advance for any help.

  Ciske.

  Open Adobe Reader on the desktop (not in a browser) mode, then in the menu, choose Edition > Preferences

  Select "Trust manager" on the left side and click Change settings. You will get a list of all URLS that are blocked or allowed, you can edit and delete the settings from there.

• I bought for the Adobe Master Costume CS5.5 product packaging a few years back and today I get the following message appears: "Configuration Error: there was a problem with the license of this product." You restart the computer and restart production

  I bought the Adobe Master Costume CS5.5 product packaging a few years back and today I get the following message appears: "Configuration Error: there was a problem with the license of this product." You restart the computer, and restart the product. Error 213:19 ".

  That was before Adobe moved to a payment structure based on participants. I need to be able to access these programs. Please provide a solution to the problem.

  order to C:\ProgramData\Adobe & C:\ProgramData\Adobe\SLStore folders full reapply administrators property back on the C:\ProgramData folder and then add everyone.

• with respect to an application to turn with the help of a global static variable

  Hello. I've read a few articles on JavaFX competition, and as a beginner, so I have to practice on this subject. Now, I'm trying to implement a turn-based application which can be played between 3 to 6 players. Furthermore, I use a scene from a .fxml file and I need to update it properly depends on certain calculations of each thread (in other word players). My main problem is, I don't want to use a while loop that checks the status of similar game;

  While (GameState! = State.GAME_OVER) {}

  currentPlayer = GameBoard.getNextPlayer ();

  perform certain actions, calculations, etc.

  }

  So, I want to use threads to work instead while loop. I guess only with the help of the Service used to iterate class and assign the next player will be adapted to instead of using the while loop and the tasks for the calculation of each player, or waiting for a few responses of human players on the UI account, however, I am faced with two problems.

  1. It has a global static variable (like the GameState which is an Enumarator) determines the State of the game, so it should be updated and must be verified by each round. Is it possible to do this?
  2. How can I get rid off this while loop?

  I would like for each answer. Thanks anyway.

  It shouldn't make too much difference. The basic idea is that you have a model class that represents your state of the game (the class of game in example jsmith). When a player makes a move, you update the game state. Because this will result in changes to the user interface, this update must be performed on the Thread of the FX Application.

  If the player makes the passage is a human player, the move would be done by a user action (mouse click or press button, etc.); This will be handled on the FX Application thread in any case.

  When the State of the game changes so it is in an "artificial" player's turn to move, have the object representing the artificial player calculate his next move and then update the game state. Since it is a response to the evolution of the game state (it is the artificial player's turn), it will also be on the Thread of the FX Application.

  The only (slight) complexity comes if the calculation of displacement for the artificial player takes a long time. You don't want to perform this calculation of long duration on the Thread of the FX Application. To handle this, the cleaner is to start a task that computes the desired pass and then updates the status of the game when travel is ready. So, something like this:

  GameState game = ... ;
  // UI is bound to the game state.
  ExecutorService executorService = ... ;
  // ...
  
  final Player currentPlayer = game.getCurrentPlayer() ;
  final Task calculateMoveTask = new Task() {
       @Override
       public Move call() {
            Move move = // compute next move...
            return move ;
       }
  };
  
  calculateMoveTask.setOnSucceeded(new EventHandler() {
       @Override
       public void handle(WorkerStateEvent event) {
            gameState.makeMove(currentPlayer, calculateMoveTask.getValue());
       }
  });
  
  executorService.submit(calculateMoveTask);
  

  If you make a thread more than that, you're probably do badly... Also, there should be no need anything it either, will be held in a "global" static variable (the idea above is the only structural change you the example posted by jsmith).

• problems with the search by using the CIS application.

  Hello
  
  We are able to connect to the server of Stellent of our J2EE application using our java code CIS.
  while performing research sometimes we get the error and sometimes it works fine (no change in the code)
  We use the socket to SCS connection type to connect via adapterconfig.xml
  Server details:
  
  CS: 10gR 3
  
  Please let me know the reason why he acts differently and on what basis we receive this error is also not known. :(
  
  ... On our J2EE server console, we get the following:
  
  2009-03-13 14:37:08, web-0 420, WARN (com.stellent.cis.server.api.scs.protoco
  l.impl.HDAProtocol) - could not find the end of header marker! ()
  2009-03-13 14:37:08, web-0 420, WARN (com.stellent.cis.server.api.scs.protoco
  l.impl.HDAProtocol) - did not read all the headers entry, attributing the type EXERCISE
  WN_TYPE
  
  -------------------------------------------------------
  Of the CommandException stack trace:
  
  com.stellent.cis.client.api.common.CreateAPIObjectException: error reading the answer of the content server: com.stellent.cis.server.filetransfer.SCSContentTransferStream: could not initialize class com.stellent.cis.client.api.scs.search.impl.SCSSearchResponse with the object of type com.stellent.cis.server.filetransfer.SCSContentTransferStream
  at com.stellent.cis.client.command.impl.services.CommandExecutorService.executeCommand(CommandExecutorService.java:62)
  at com.stellent.cis.client.command.impl.CommandFacade.executeCommand(CommandFacade.java:158)
  at com.stellent.cis.client.command.impl.BaseCommandAPI.invokeCommand(BaseCommandAPI.java:84)
  at com.stellent.cis.client.api.scs.search.impl.SCSSearchAPI.search(SCSSearchAPI.java:92)
  at com.pg.emfg.ewps.stellent.service.impl.StellentDMSServiceImpl.searchString(StellentDMSServiceImpl.java:348)
  at jrun__search2ejspb._jspService(jrun__search2ejspb.java:124)
  at jrun.jsp.runtime.HttpJSPServlet.service(HttpJSPServlet.java:43)
  at jrun.jsp.JSPServlet.service(JSPServlet.java:106)
  at jrun.servlet.ServletInvoker.invoke(ServletInvoker.java:106)
  at jrun.servlet.JRunInvokerChain.invokeNext(JRunInvokerChain.java:42)
  at jrun.servlet.JRunRequestDispatcher.invoke(JRunRequestDispatcher.java:241)
  at jrun.servlet.ServletEngineService.dispatch(ServletEngineService.java:527)
  at jrun.servlet.http.WebService.invokeRunnable(WebService.java:172)
  to jrunx.scheduler.ThreadPool$ DownstreamMetrics.invokeRunnable (ThreadPool.java:348)
  to jrunx.scheduler.ThreadPool$ ThreadThrottle.invokeRunnable (ThreadPool.java:451)
  to jrunx.scheduler.ThreadPool$ UpstreamMetrics.invokeRunnable (ThreadPool.java:294)
  at jrunx.scheduler.WorkerThread.run(WorkerThread.java:66)
  Caused by: com.stellent.cis.client.api.common.CreateAPIObjectException: error reading the answer of the content server: com.stellent.cis.server.filetransfer.SCSContentTransferStream: could not initialize class com.stellent.cis.client.api.scs.search.impl.SCSSearchResponse with the object of type com.stellent.cis.server.filetransfer.SCSContentTransferStream
  at com.stellent.cis.client.api.scs.impl.SCSObject.intialize(SCSObject.java:130)
  at com.stellent.cis.client.api.scs.impl.SCSServerBinder.intialize(SCSServerBinder.java:91)
  at com.stellent.cis.client.api.common.impl.CISAPIObjectFactory._initializeObject(CISAPIObjectFactory.java:250)
  at com.stellent.cis.client.api.common.impl.CISAPIObjectFactory.createObject(CISAPIObjectFactory.java:181)
  at com.stellent.cis.server.api.scs.impl.SCSCommand.prepareResponse(SCSCommand.java:300)
  at com.stellent.cis.server.api.scs.impl.SCSCommand.execute(SCSCommand.java:225)
  at com.stellent.cis.client.command.impl.services.CommandExecutorService.executeCommand(CommandExecutorService.java:57)
  ... 16 more
  
  Thanks in advance
  
  Prasad.V

  Hi Prasad,

  The above error is thrown when the socket with Content Server connection is terminated before that Content Server is able to send a full response. Most often, this occurs when the connectionTimeout for the CIS adapter is set to a shorter time than necessary for the Content Server service call ends.
  Note: The error message above also can be lifted during network downtime. Before proceeding with the solution below, you must make sure that there is no problem of network between the CIS Forum and the content server environment.

  -To implement the solution, please perform the following steps:
  1. open a browser and go to the page of information system Audit in the Content Server Administration section.

  2. in the Sections Tracing information section, select system, requestaudit, searchcache searchquery for the text box active Sections.

  3. make sure the Full Verbose Tracing above than the active Sections text box is checked.

  4. click the update button.

  5. at the top of the System Audit information page, click the link View Server output.

  6. on the page out of the server, click the clear button. Leave this window open.

  7. through the application of the CIS, submit the longest race of service or who causes the above error.

  8 return to the window of the browser in step 6, and then click the Refresh button.

  9 review the requestaudit tracing messages and find the service call that takes the most time. In most cases, this will be a GET_SEARCH_RESULTS call, other calls for service can also take some time. Below is an example of line tracing requestaudit showing a second service call 45.536.

  02.09 requestaudit 11:07:54.523 LONG_SEARCH_CUSTOM_SERVICE IdcServerThread-30944 [dUser = sysadmin] [QueryText = dDocTitle + % 3csubstring % 3F + % 60test % 60] [StatusMessage = success] 45.536 (dry)

  10 once the longest running service call is identified, add a reasonable buffer (e.g. 10-15 seconds) to take account of the additional load on the server. This amount of time of the call of service and the amount of memory buffer will be the value used for the connectionTimeout value.

  11. in the adapterconfig.xml, the node connectionTimeout for the CIS adapter to the value calculated in step 10. Please note that the value for the connectionTimeout configuration is specified in milliseconds. For example, if calling the function running longer, more buffer memory is about 60 seconds, then the value of connectionTimout can be assigned to 60000.

  12 restart the CIS Forum and the test.

  Hope this helps

  Thank you
  Srinath

• iOS 10 problems with the Mail application

  Dear Apple and community support,

  Here's my problem:

  I have upgraded to iOS 10 on my iPhone 5s this afternoon (September 13), and now I'm not able to open e-mail - Yahoo!, and Gmail. I can receive emails, I'm not able to view the body of these emails. When I press on them, all I see is a blank white page. I can't answer emails either. I can only their flag or remove them. However, I am able to compose new e-mail messages.

  Here are the steps that I've taken to try to solve my problem:

  1. Restarted my phone
  2. Remove and re-add my Mail accounts
  3. Made a backup and a restore full while that plugged into my laptop with the latest version of iTunes.

  I should be grateful if you would help or more information on this issue.

  Thank you

  Emily

  I also have problems with the Mail application.  On my iphone, ipad, and Mac Pro.  I have several addresses, a MSN, another on Go Daddy and Gmail.  I have various weird problems with threads and every day he re-charge my emails, like if I have never read before.  Something is really problematic with Mail.

  Can the people of APPLE, you help me?

• Error message indicating the problem with the monitor of devices in Windows XP.

  Original title: Device Monitor

  Error message indicating the problem with the monitor of devices in windows xp. How to fix?

  Hello

  1. when exactly you receive this error message?

  2. What is the brand and model of your computer?

  3. What is the exact error message that you receive?

  Please provide us with more information about the issue so that we can provide you with the necessary assistance.

• Try to install windows 7, the process stops at 98% with the error 0x8007045D code in a file dialog box

  I'm building a new computer. Motherboard Intel DZ77BH - 55K, Intel i7 - 3770S. I load files terabyte disk WD Caviar, 16 GB Coarsaur vengeance DDR3 1600 RAM, Windows 7, but hangs up on their expense. What should I do to complete the installation of Windows 7?

  Hi Larry Hamerman,.

  Thank you for writing to Microsoft Communities. I understand that you are unable to install the Windows 7 operating system on the computer.

  Until we start troubleshooting on this issue please provides us with additional information by answering a few questions below, this will help us better solutions to the problems.

  1. you try to perform a clean installation or upgrade?

  2. What is the full error message do you get?

  3. from device you are trying to install?

  Make sure that the Windows 7 disc is clean and Unscratched exist. Unplug all external/USB devices before installing.

  If you try to upgrade Windows Vista to Windows 7 operating system, then I suggest you to run Windows 7 Upgrade Advisor.

  Windows 7 Upgrade Advisor: http://windows.microsoft.com/en-US/windows/downloads/upgrade-advisor

  What is a Windows 7 upgrade compatibility report, and what the results mean?

  http://Windows.Microsoft.com/en-us/Windows7/what-is-a-Windows-7-upgrade-compatibility-report-and-what-do-the-results-mean

  Note: The hard disk must have at least 3 GB of free space on the disk for the Windows 7 installation files. The hard disk must have at least 16 GB of additional disk space to install Windows 7. For more information about system requirements for Windows 7, see the Microsoft Web site at the following address:

  http://Windows.Microsoft.com/en-us/Windows7/products/system-requirements

  For your reference: Windows 7 installation problems: frequently asked questions: http://windows.microsoft.com/en-US/windows7/Windows-7-installation-problems-frequently-asked-questions

  Installation of Windows 7: frequently asked questions: http://windows.microsoft.com/en-US/windows7/Installing-Windows-7-frequently-asked-questions

  Please follow these recommended steps and post if you still experience the problem.