While taking pictures of the full moon I end up with a ghost image.

Similar Questions

• Screen flashes while taking pictures using the Auto flash and front camera on

  Device: iPhone 7 more

  iOS: 10.0.2

  Question: Screen flashes with blank white light while taking the photo using a front camera with the flash light on which is so annoying

  Note:

  After taking the photo, the photo is visible and doesn't have any problem

  I could be wrong, but I think that this is how flash works for the front facing camera.

• How can I recover my windows vista serial, the tile is broken and im missing a few numbers... __i lost my toshiba recovery CD, it is an a135/s4677, I reinstalled vista, but in the first instance. I am already taking pictures of the sticker and serial No.

  How can I recover my windows vista serial, the tile is broken and im missing some numbers...
  I lost my toshiba recovery CD, it is an a135/s4677, I reinstalled vista, but in the first instance. I am already taking pictures of the sticker and serial No. my laptop if you need if you can help me please write me * address email is removed from the privacy * thank you

  If you had not reinstalled Vista, we helped you recover the product key of Vista for running old, Vista activated using specific programs.

  But, as you have wiped the hard and reinstall Vista, we will not help you recover the product key.

  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  Using recovery disks is normally not need to insert a product key.

  See you soon. Mick Murphy - Microsoft partner

• can I get the full version of photoshop cc with photography package?

  can I get the full version of photoshop cc with photography package?

  Yes

• Remove the cast/blue tint of JPG (setting the wrong while taking picture white balance)

  Hello

  Photosohop newb here with still CS3 (10.0), so please be patient.

  I was at a convention, there is not so long ago, I took a lot of pictures with my phone. I have noticed that in the House, that some of the photos came out with an intense blue cast because of a bad white balance setting (I must have accidentally changed).

  I tried to fix the image for the last 2 hours, without real success. I tried everything under Image-> settings-> "Auto color", "Levels of colors" and "Match Color", moving the sliders up and down to get the best match. The best I could come up with was still far from the other photos that I took the same day.

  This is one of the bad pictures: http://imgur.com/vw12aTQ

  And here is one I took a few minutes later with the 'normal' setting: http://imgur.com/RMFm7fo

  In fact, I had a pretty good game by cutting stones on the two photos and using "matches the color'-> 'Source', but I couldn't apply this technique to the overview.

  Could someone please help me to make the colors of the first image similar to the second?

  Thank you

  Roland

  Here is an easy solution...

  Choose the Image - adjust - curves, and then right-click the gray Point eyedropper and sample something in the picture that should be a neutral gray - say one of the rocks on the ground.  Click on in various places, until you like what you see.

  

  -Christmas

• Not able to be seen on top of an image with no text wrapping, prepared text box to be on the top, on the top layer and works fine with all other images with text is near or above the image in this document, PLEASE HELP

  I have an InDesign Document with a handful of images and text on the top or near the images. This should be so simple, but for some reason, I keep having this problem. There is no build-up on the given word and I can't place any text on one of the images. All the settings for all of the images in this scenario are the same. I'm fine with everything else but this one...

  I don't see any boxes hidden or anything else for that matter. I've recreated text boxes and still have the same problem it appears then disappears or I can get only part of the Word visible on the image, then a + sign comes... It should work please help. I tried to recrete this particular image and word a handful of times its just not the text box woking sometimes added a sign which does no sense, I tried a different text alignment so +... Yes indeed HELP Please thank you I can send a screen if it helps

  Have you tried select the text block, and then go to object > text frame Options and checking the checkbox ignore text dressed ?

  

• Still can not play music while taking pictures 6 s!

  I take pictures with my phone for work, I have 5 years. I used to be able to listen to music while doing so, now with 6 s/iOS 9 + I can't. It may seem silly to some, but it literally prevents my day. Whenever a new iOS update comes through that I cross my fingers and hope that this will be one but not. So frustrating. Is this going to get a software patch or what!

  Send your feedback to Apple here:http://www.apple.com/feedback/

  It is a user to user forum, so that nobody here knows the future plans of apples. -AJ

• Ken Burns effect on the large picture, keeping the full quality?

  Hi, I have a few high ground always images to add to a video with a simple Ken Burns effect. I would like to keep the really high quality to zoom in, is there a way to do this, IE select the photo source rather than to import them when he has reduced the size of the project (a bit like Avid pan and scan function)?

  Thanks in advance

  TThis image is imported at full resolution. When it is put into a project, it's default scaling to fit this project, but its resolution is not diminished somehow. You can use Ken Burns to create an animation or the function of culture/culture or the scale and position to crop. The image is always at full resolution.

• greeenish background while taking pictures.

  Original title: why the background would be greenish when I take a picture of my camera computers? He has never been before

  I took several pictures from my camera to the computer and now I have tried and the background is greenish. There is no way to deal with what I can see, and all others were perfect.

  Hello
  Check your video drivers and drivers of the cam.
  Also, make sure that it is has that funny set in the video settings in your CAM software.

  Look for the old drivers Device Manager and update

  Click Start, click Run, type the sysdm.cpl in the Open box, and then click OK.

  Click the Hardware tab, and then click Device Manager.

  Right click on the device, and then click Properties.

  Click the driver tab.

  Compare the version of the driver on the tab, with driver version information on the latest version of the driver that is published on the website of the manufacturer.

  To resolve problems that are caused by corrupted or outdated drivers, install the latest drivers:

  Click Start, click Run, type the sysdm.cpl in the Open box, and then click OK.

  Click the Hardware tab, and then click Device Manager.

  Right click on the device, and then click Properties.

  Click on the driver tab, then click on set to update driver.

  Follow the instructions on the screen to complete the update of the driver.

  b Eddie

• I get no picture on the TV when using mini ipad with the Digital AV adapter.

  I get a white on my TV screen when I connect my mini ipad digital AV adapter except HDMI 1 showing in the upper left corner of the TV screen. My mini2 ipad works great with the same son and TV.  I tried two ipads with different TV but get the same result. The ipad mini works OK if not connected to the TV. Two minis are working on the same operating system setting.

  The Digital AV adapter can be finnicky.

  Have you tried simply unplug and plug the adapter with the HDMI cable connected with it?

  With the adapter always plugged into your iPad, have you tried a hard reset of your iPad by pressing the sleep/wake and Home buttons simultaneously until your iPad goes to the dark and restarts with the Apple logo, then release them buttons?

  Good luck!

• Why have I not photos of icons and pictures of the sites I've visited mixed with my photos?

  When I opened my image library, there are randomly 'snap shots', I guess you could call it, of sites that I have visited on the internet icon images and program as well as logos, etc mixed in with my photos.  How can I stop this from happening?  It comes from some program that says my computer to do this.  I am not all that computer savey, obviously and could use as much help as possible.  Thank you

  When I opened my image library, there are randomly 'snap shots', I guess you could call it, of sites that I have visited on the internet icon images and program as well as logos, etc mixed in with my photos.  How can I stop this from happening?  It comes from some program that says my computer to do this.  I am not all that computer savey, obviously and could use as much help as possible.  Thank you

  =============================================
  When you browse the net, photos and graphs are
  downloaded to your Temporary Internet Files folder
  Thus, they can be displayed on your screen. What follows
  Info explains how to remove them from your system.

  (260897) how to remove the content of the Internet temporary files folder
  http://support.Microsoft.com/default.aspx?scid=kb;en-us;260897
  (Windows XP, Vista, 7)

  Windows 7 - delete files using disk cleanup
  http://Windows.Microsoft.com/en-us/Windows7/delete-files-using-disk-cleanup

  Windows 7 - delete history Web page
  http://Windows.Microsoft.com/en-GB/Windows7/delete-webpage-history

  Also you can manually delete the files by navigating
  the Temporary Internet Files folder and delete all.
  thing in it.

  Path:
  C:\Users\\AppData\Local\Microsoft\Windows\
  Temporary Internet Files\

  If your Temporary Internet Files folder is hidden... try
  the following steps in Windows 7:

  Reach... Button start / Control Panel / appearance
  and customization / Folder Options / Advanced
  settings / display files, folders, and disks / OK

• Hi, I need to see the full product list, I "bought" with creative cloud. I'm not sure. Thank you

  Hello

  Could you please help?

  What product I am supposed to be subscribing to creative cloud.

  I expect the Prime Minister, but he doesn't seem to be part of.

  Thank you

  Sandra

  Sorry, please ignore my question and I thank you for your time, I was automatically logged with former ID, not the one that I bought... He works with the right...

• Change the base color of a raster with a gradient image.

  Hello

  I have a small picture of raster (png) (8 wide x 75 pixels) high I have beautiful is looking for arrangement or gradient shades of green.  I have a site of sample that I created during playback in class CC of DreamWeaver in a book that contains this image horizontally to create backgroung for a navigation menu.

  I want to "recreate" the same effect for my own site, but in shades of gray instead of shades of green.  Can someone tell me what is the best way / tool in Photoshop or Illustrator that would allow me to change this raster image so that every shade of green is converted to a corresponding shade of gray, while retaining the same general effect / appearance that I try to recreate?  If you could point me to a tutorial or explanation of how to do this, I would really appreciate it.

  Thanks in advance,
  Paul

  One of the simplest ways is to simply convert your color to grayscale image.

  • Image > adjustments > Desaturate or shift-ctrl-u (windows) shift-cmd-u (mac)
  • Image > adjustments > black and white, this filter will allow you to preview so that to change individual colors if necessary to darken or lighten the shade. (That would be more sensitive with a multi color image)
  • Image > adjustments > cmd - u (mac) Hue and Saturation or ctrl-u (windows) this command will allow you to desaturate a color or change its hue and or brightness. (This works well to change from green to blue for example but will work to desaturate both green)

  Most of the people is called destructive commands because they are permanent.

  • Layer > new adjustment layer > Hue/Saturation
  • Layer > new adjustment layer > black and white
  • Layer > new adjustment layer > gradient map

  Here are the layers while not destructive in that you can go any time back and change this setting assuming that you save in a format that takes in charge the layers. As psd or tiff.

• Firefox 4 is incompatible with OSX 10.4.11. I replaced the old Firefox and end up with nothing. What should I do?

  After the update for Firefox 4 and substitute 3.6, there without the ability to use this browser. I can't find an older version to download either. To do a fix or a link to download 3.6. I have already seen that there are many others that have this exact problem.

  You can download an older version here: http://www.mozilla.com/en-US/firefox/all-older.html

• See the full gallery does not work

  While I can see the full gallery on http://www.cnet.com/products/dji-phantom-3-advanced/, in the Chrome browser, only the first image appears in the 9.0.2 Version of Safari 11601.3.9 (El Capitan, 10.11.2 (15 C 50).)

  Who else has this problem?  Why the problem and what is the solution?

  Safari - no support for third-party modules can cause Safari to suddenly quit, or have performance problems

  Safari does not load a page or webpage elements are missing

  Safari / other browsers - Web site does not