greeenish background while taking pictures.

Similar Questions

• Screen flashes while taking pictures using the Auto flash and front camera on

  Device: iPhone 7 more

  iOS: 10.0.2

  Question: Screen flashes with blank white light while taking the photo using a front camera with the flash light on which is so annoying

  Note:

  After taking the photo, the photo is visible and doesn't have any problem

  I could be wrong, but I think that this is how flash works for the front facing camera.

• Still can not play music while taking pictures 6 s!

  I take pictures with my phone for work, I have 5 years. I used to be able to listen to music while doing so, now with 6 s/iOS 9 + I can't. It may seem silly to some, but it literally prevents my day. Whenever a new iOS update comes through that I cross my fingers and hope that this will be one but not. So frustrating. Is this going to get a software patch or what!

  Send your feedback to Apple here:http://www.apple.com/feedback/

  It is a user to user forum, so that nobody here knows the future plans of apples. -AJ

• Remove the cast/blue tint of JPG (setting the wrong while taking picture white balance)

  Hello

  Photosohop newb here with still CS3 (10.0), so please be patient.

  I was at a convention, there is not so long ago, I took a lot of pictures with my phone. I have noticed that in the House, that some of the photos came out with an intense blue cast because of a bad white balance setting (I must have accidentally changed).

  I tried to fix the image for the last 2 hours, without real success. I tried everything under Image-> settings-> "Auto color", "Levels of colors" and "Match Color", moving the sliders up and down to get the best match. The best I could come up with was still far from the other photos that I took the same day.

  This is one of the bad pictures: http://imgur.com/vw12aTQ

  And here is one I took a few minutes later with the 'normal' setting: http://imgur.com/RMFm7fo

  In fact, I had a pretty good game by cutting stones on the two photos and using "matches the color'-> 'Source', but I couldn't apply this technique to the overview.

  Could someone please help me to make the colors of the first image similar to the second?

  Thank you

  Roland

  Here is an easy solution...

  Choose the Image - adjust - curves, and then right-click the gray Point eyedropper and sample something in the picture that should be a neutral gray - say one of the rocks on the ground.  Click on in various places, until you like what you see.

  

  -Christmas

• While taking pictures of the full moon I end up with a ghost image.

  Is it because of the filters in place? The entry please. Canon T5i with 18-135mm zoom EF5. I used the auto without flash.

  Bright and particularly bright objects on more often dark backgronds, can create 'ghosts' when you have flat filters attached to the goal.  The flat surface is a perfect 'mirror' and light reflects on the front of the lens, hits the filter and reflects in the goal of creating the copy "ghost".

  Superior quality filters usually have good anti-reflection treatment to mitigate the effects, but I think it's better just to remove the filter completely and use them when they are needed or useful.

• When taking picture with the light in the background with the camera back from my iPhone more than 6 s, there is a clear blue colour square (a bit like a reflection of the light) will appear.

  When taking picture with the light in the background with the camera back from my iPhone more than 6 s, there is a clear blue colour square (a bit like a reflection of the light) will appear.

  someone has an idea of what's going on?

  The blue square is the area of the camera is in point and exposure on.

  Tap on the area actually taking a picture of. For example, if you take a photo of someone int eh the room and the bottom is very light (or dark), tap on the face of the person to turn to that.

  See it-> http://iphonephotographyschool.com/how-to-use-iphones-camera-app/

• I just bought my camera t6i today and I was outside taking pictures and a small Cliff fell the

  I just bought my camera t6i today and I was out taking pictures and fell on a small cliff, camera hit the ground, but I think that the autofocus is turned off but I do not know quite well the camera. Anyone know?

  Thanks in advance!

  Do you mean you can manually focus the lens, but it will not focus in AF mode?

• How can I recover my windows vista serial, the tile is broken and im missing a few numbers... __i lost my toshiba recovery CD, it is an a135/s4677, I reinstalled vista, but in the first instance. I am already taking pictures of the sticker and serial No.

  How can I recover my windows vista serial, the tile is broken and im missing some numbers...
  I lost my toshiba recovery CD, it is an a135/s4677, I reinstalled vista, but in the first instance. I am already taking pictures of the sticker and serial No. my laptop if you need if you can help me please write me * address email is removed from the privacy * thank you

  If you had not reinstalled Vista, we helped you recover the product key of Vista for running old, Vista activated using specific programs.

  But, as you have wiped the hard and reinstall Vista, we will not help you recover the product key.

  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  Using recovery disks is normally not need to insert a product key.

  See you soon. Mick Murphy - Microsoft partner

• I want an application that runs in the background while I 'back' menu Chick, how do

  I didn't quit, I just want the application runs in the background while I 'back' menu Chick, how?

  You can use the Application.requestBackground method.

  See the following post:

  http://supportforums.BlackBerry.com/Rim/Board/message?board.ID=java_dev&message.ID=19444&query.ID=79...

• What is the best way to make the completely white background for the pictures of the products?

  What is the best way to make the completely white background for the pictures of the products?  I just need to show a product on a completely white background.

  Shoot on properly informed white background is easy. Then be tot apply an adjustment layer to whiten the BG, then apply a mask for the domains you want to not so bright.

• The camera/webcam on my laptop Windows 8 says that "something went wrong" while taking this picture when I try to take a picture.

  My laptop is a Lenovo Ideapad S405 with Windows 8. The webcam is an Image easy Lenovo is manufactured by Vimicro and is built into my laptop. Whenever I try to click to take a picture, an error message pops up that says "something was wrong all by taking this picture. Another strange thing is that four of the videos that I have taken are listed in the film, but is not graphic and cannot be played. All my photos and my previous videos are always good. I looked at the videos before and they were still there, but now they are gone. I did not any changes to settings or anything else on my computer and Control Panel seems to think that the device still works. I tried to update my computer with Windows updates, but nothing works. I also discovered that my photos folder is no longer work and Windows said it can be removed safely. I can't access my photos, music or videos. I think the problem might be that my photos have no place to be stored, but I need to know how to solve this problem.

  Thank you
  QuartzCanteloupe

  I found a solution to my problem! In another post, someone had the same message about how the library.ms could be deleted, but it was empty. They removed the libraries by clicking the option libraries from left to right, and then click. I then clicked on "restore deleted files" and my folders returned with the restored elements. I could then take pictures and videos because they had a place to be stored.

  Thank you
  QuartzCanteloupe

• Canon t5i lcd turns off after taking pictures

  I just got my Canon T5i... I noticed that the LCD screen turns off sometimes after taking photos or videos. I don't know why... I did not press the "info" button and it will not turn back even if I press the shutter button to halfway... I know that the camera is still on though because if I press on the screen it will take a picture and this picture is stored on the card (after that I turned off the camera completely and wait a few minutes and turn it back on)...

  When the LCD is turned off, I can't get it on... I will touch the screen and try to press the display button to see photos, but it will start...

  and Yes, I disabled the auto lcd off etc...

  Here is a little video I made sure to show you what I saw. http://www.YouTube.com/watch?v=TroZa5xLduM

  Should I have a defective camera?

  I noticed in the video that she has Lieview, take a picture and then the picture does not appear, and there is more no Liveview display.  She then press the Liveview button and nothing happens. There's no other option I can think of that allows you to turn off the LCD screen back when you're in Liveview. That tells me that the device is defective.

• change the background while retaining the shadow.

  I did a shoot of model with a bright light, the shadow is really strong, but I want to change the color of background to a specific temperature R:238 G:238 B:238, while retaining the shadow can someone help? I have attached an image low resolution I want to apply it to:

  Thank you!

  Hide the model, use curves to adjust the background and shadow to the new values using an adjustment layer curve.

• How to export a clip in the background while I continue working on other clips?

  While I publish a clip, is it possible to do it in a background process so that I can continue to work on the edition of the other clips while PE publishes the video? Right now I have to wait the first clip to be published and then only I can continue editing next clip.

  Massi

  N °

  Also...

  Have you noticed that if you read the Timeline content and you go to another application, first elements timeline content playback will stop. Just one example not to do.

  For any question or need clarification, please ask.

  Thank you.

  RTA

  Add on... Please include Premiere Elements version and operating system for more specific answers. But, in this case, the answer refers to Premiere Elements any version.

• DSC - P92 FUEL NOT TAKING PICTURES

  My DSC - P92 our to see pictures but does not supply power to take pictures or vidios. When I press on and hold the power button, the light turns on for less than a second and then turns off. The defiler of batteries on the Viewer, while looking at images, shows that the batteries are good. Any suggestions on a solution without sending it in for repair because the unit is old and probably not worth the cost of repairs it.

  Good day jir! I am sorry to hear that you're having trouble with the Cyber-shot. Please press the Reset button that is located under the Zoom buttons, you will need to open the Jack cover to access the Reset button. According to the procedure should correct the problem.

  You can refer to page 87 DSC P92 operating instructions to find the reset button.

  If my post answered your question, please mark it as "accept as a Solution.