While the application signature Tablet problem!

Similar Questions

• Loading in click - once the Application OR assembly problems

  I created an application to measure the current consumption of a device in Visual Studio 2012. I built a library for the National Instruments USB-6008 and added the dll from C:\Program Files (x 86) \National Instruments\MeasurementStudioVS2012\DotNET\Assemblies\Current, which is 9.9. Everything went well on my dev machine, so I pushed all the changes on the production server, which is packaged as a click - once the app.

  On the machine running the real click - once the application, I downloaded and installed the fir driver 9.9 from here: http://www.ni.com/download/ni-daqmx-9.9/4707/en/. When the request arrives at the point where it measures the current consumption, I get the error:

  System.BadImageFormatException: Could not load file or assembly 'NationalInstruments.DAQmx, Version=9.9.45.39, Culture=neutral, PublicKeyToken=4febd62461bf11a4' or one of its dependencies. An attempt was made to load a program with an incorrect format.
  File name: 'NationalInstruments.DAQmx, Version=9.9.45.39, Culture=neutral, PublicKeyToken=4febd62461bf11a4'
  

  What I am doing wrong?

  The solution I found to this problem is to install the samples for Measurement Studio. Don't know why it has to be installed on the computer that runs the Clickk - once the App if.

• Code Signing - cannot ask the application signature that requires to be signed

  Hello

  I'm looking for, via the codesign tool, to the signature of the request for two .cod files. Necessary for the other to exploit one of the .cod files. For example, I have a library and a cldc app that depends on this library.

  I am able to sign completely (RBB, CPR and RRT) library cod. However, on request cod I can sign only with BAR and CPR. No TRNS. Of course, when I try to run my application on my device, it requires the signature of the RRT. But the option doesn't even exist in the to sign!

  How can I register my application correctly?

  Add the cod again to the sigtool makes no difference. I was unable to find all the other useful posts in this forum or in the documentation.

  Thank you!

  Figured it out. It is a failure of the software tool signature to acknowledge that the CLDC app should be signed with the same signatures than any of the libraries it depends on.

  What fixed it:

  http://www.BlackBerry.com/knowledgecenterpublic/livelink.exe/fetch/2000/348583/800901/Support_-_Sign...

  Can I give congratulations to myself?

• How to keep the screen on while the application is active [mobile Flex]?

  Hi there, does anyone know how to disable the feature that turns off the display if no button of the screen is detected?

  For example, I have a request, and if I do not touch the screen for some time, he died. How to disable that?

  Thank you!

  Figured out how.

  This is used inside the init() function:

  NativeApplication.nativeApplication.systemIdleMode = SystemIdleMode.KEEP_AWAKE;

  This disabled the application - app.xml:

• While the application of Patch, we are not signing apply to production

  When applying oct2008 developer CPU patches 7343387 I got below uh.
  
  
  
  < p >
  * Generating product JAR files...
  < /p >
  < p >
  No signature will apply for the product in JAVA_TOP JAR files-
  
  / xxx/App/xxxcommon/Java.
  < /p >
  < p >
  Generating files in JAVA_TOP-JAR
  
  / xxx/App/xxxcomn/Java with the command:
  < /p >
  < p >
  adjava-mx512m - nojit oracle.apps.ad.jri.adjmx @/xxxx/app/upg11appl/admin/xxxx/out/genjars.cmd
  < /p >
  
  
  < p >
  Successfully generated JAR product JAVA_TOP - files
  
  / D006/App/upg11comn/Java.
  < /p >
  < p >
  Copying Registry.dat Forms Java directory to/xxx/app/xxxcomn/java...
  < /p >
  < p >
  AutoPatch error:
  
  Error when copying the forms on xxxx/app/xxxcomn/java/oracle/forms/registry/Registry.dat registry file.
  < /p >
  < p >
  
  
  adogjf() Impossible to copy Registry.Dat.
  < /p >
  < p >
  AutoPatch error:
  
  Cannot generate the product JAR files
  < /p >
  < p >
  
  
  You must check the file
  
  /XXXX/app/upg11appl/Admin/xxx/log/u7343387.log
  < /p >
  < p >
  to find errors.
  
  
  
  This is the error log file
  
  ----------------------------
  < /p >
  < p >
  Copyright (c) 2002 Oracle Corporation
  
  Redwood Shores, California, USA
  < /p >
  < p >
  Java AD
  < /p >
  < p >
  Version 11.5.0
  < /p >
  < p >
  NOTE: You can use this utility to custom development
  
  unless you have written permission of Oracle Corporation.
  < /p >
  < p >
  
  
  Successfully generated JAR product JAVA_TOP - files
  
  / xxx/App/xxxxcomn/Java.
  < /p >
  < p >
  
  
  STOP_TASK: [Generate JAR files under JAVA_TOP] [] [Friday, October 31, 2008 13:06:27]
  < /p >
  
  
  < p >
  Made generate JAR files under JAVA_TOP: Friday, October 31, 2008 13:06:27
  < /p >
  
  
  < p >
  STRT_TASK: [copy Registry.Dat to JAVA_TOP] [] [Friday, October 31, 2008 13:06:27]
  < /p >
  < p >
  
  
  Copying Registry.dat Forms Java directory in xxx, app, uxxx1comn, java...
  < /p >
  < p >
  AutoPatch error:
  
  Error when copying the forms on xxx/app/xxx/java/oracle/forms/registry/Registry.dat registry file.
  < /p >
  < p >
  
  
  adogjf() Impossible to copy Registry.Dat.
  < /p >
  < p >
  AutoPatch error:
  
  Cannot generate the product JAR files
  < /p >
  
  

  Check this note.
  https://metalink2.Oracle.com/MetaLink/PLSQL/ml2_documents.showDocument?p_database_id=not&P_ID=279306.1

  Make a backup of the file before editing it.

• Trigger a function after 1 minute, while the application is open.

  Hey guys, I wrote a simple widget that reads from a file rss. My question is what is a good way to repeat a function every minute? The widget can run up to 8 hours straight...

  Any ideas? I want to trigger a bugsFeed.send (); once per minute.

  Thank you!

  Example code:

  import flash.utils.Timer;import flash.events.TimerEvent;
  
  // create a timer that fires every minutepublic var timer:Timer = new Timer( 60*1000 );
  
  public function init():void{     // add event listeners     timer.addEventListener( TimerEvent.TIMER, handleTimerEvent );
  
       // start the timer     timer.start();}
  
  public function handleTimerEvent( event:TimerEvent ):void{     bugsFeed.send();}
  

  Let me know if that helps...

  Ben Edwards

• strange behavior of the application in vista

  Hello!

  Our firm has developed an application using the wacom tablet. It has been developed on Win XP and Labview 2010. Our client use Win Vista OS and knows a message «program stopped working...» "very randomly when using the application. We traced the problem down to a Subvi, which exports the measurement data and it appers that the program crashes when he enters a loop for, but not always and the application works without problem on Win XP and Win 7. How are your suggestions, which can change in the Subvi?

  The problem is solved: very happy smiley: I used the format based on string to write directly in the text file. Thanks for all the suggestions and the effort. I will attach my new VI if everyone will have similar problems in the future.

• Affecting RenderMode DIRECT causes the Application AIR Crash when the direction of changes

  Hello

  I created a new project of Starling and sets in the BAR descriptor to direct , and whenever the phone changes the orientation, the application crashes.

  This happens even before I instantiate and start being Starling...

  Any thoughts? Thank you

  I tested a project Starling of myself, and while the application does not crash there are certainly problems of rendering. A quick search on google turned up this article on how to deal with changes in Starling - http://wiki.starling-framework.org/manual/auto-rotation

  Let me know how make you out!

  See you soon,.

  Dustin

• Report Generation Toolkit, production of the 2147417842 error, "The application called an interface that was marshalled for a different thread."

  Hello world

  I have an application that stores data in an Excel worksheet by using the report generation tool.  My VI have worked well in the past using Excel XP, but since I have upgraded to Excel 2007, I get COM errors like this:

  "2147417842 error occurred while the application called an interface that was marshalled for a different thread. in Excel_Insert_Text.vi', this is the exact wording, even with the odd punctuation and capitalization.

  The first occurrence of the error is not determined.  Sometimes, to the record 10 sessions, involving a new .xls file, may occur before this error.  Once this error occurs, I must leave LabVIEW to solve.  If I try to do something with Excel, I still get this error, even if sometimes it comes out different source Excel_Open.VI is another.

  These screw logging worked fine until upgrading to Excel 2007.  I checked and I have been using a very old version of the report generation tool, v1.0.1.  I read the documentation and had a big sigh of relief when I realized that I needed to upgrade to v1.1.2 for Excel 2007 help.  However, even after the upgrade, I still get the same errors.  I'm using LabVIEW 8.0.1 and I also build these screws in an application.   The error occurs in the application built both in the IDE of LabVIEW.  Anyone out there have any idea what I can do to fix this?  I google a bit and discovered it is a COM error, but I can't find any reference to the report generation tool specifically.

  Thank you

  Phil

  I think that suits him!

  Here's what I did: I left privileged execution environment level upper VI as "as the appellant.  I tried the "user interface" configuration, but it seemed to slow down considerably the program.

  Then, I found each sub - VI, calling the report generation tool and define the environment for running favorite "user interface".  All the errors went away, and the program is much happier now.

  Big assumption on what a Christian, thank you!

• the application builder exe file does not work

  Hi all

  I have a usb data acquisition module, it is USB 2408-2AO of MC. I order the module with a VI and it works very well. I used the Application Builder to create an exe of the VI. The exe works great too, but only on my own computer and not on other computers.

  I already made the other screws's exe files and never had any problems to run the exe on other machines. I also tried to do an installation of the VI program and not just a stand-alone application, but once again the final application does not work. The application runs without problem on the target computer, no errors are displayed, but it just does not control the USB module as it should. I think the problem is that the builder Application does not include al screws required in the installation program, particularly MC devices to control the USB device. I tried to manually choose the screws, but it seems that everything is included... I am sure that the problem is the USB device, as I did other exe files and they all work very well (but they do not control the USB device) on other machines. Someone has any idea how to solve the problem?

  
  

• jQuery Mobile BB10 theme: the Application (kick-down) Menu

  I use the latest released version of the jQuery Mobile BB10 theme to develop my apps. I have some questions on how to implement the Application Menu (or sliding down):

  1. I understand the instructions for user interface while the Application Menu is no longer an overlay on top of the current screen (because we are used to seeing in the PlayBook OS 2 applications)? Is the Menu of the Application requires to press the entire page (or screen) down to display the menu buttons?

  2. the Application Menu included in jQuery Mobile BB10 theme, or do we need to implement the set up menu and keys by using a custom code? It is relatively easy to implement this function. I just want to make sure my code matches what is in the BB10 theme.

  Thank you.

  Hello ProLove360,

  I don't think JQuery UI BB10 theme includes a blow in the drop down menu, but the implementation of the menu to slide down to BB10 in WebWorks is not set in stone. In fact, it is very expensive (side performance) to go down the whole container to reveal the menu, therefore a superposition of the top does work better in my opinion.

  You can use the example below for a shot in the menu drop-down:

  https://github.com/BlackBerry/BB10-WebWorks-samples/tree/master/swipemenu

• drawing on the screen when the application is in the background

  Hello

  is it possible that I can draw a small circle on the screen? but this circle can be visible on the screen, suggest a circle on the screen, I started my candidacy and I press the key 'End' that makes my request in the background can now circle can be viewed on the home screen and all the other screen where I want to sail?

  is it possible? If so how?

  As far as I KNOW, it is not possible to trace a circle on the home screen and all the other screen which you access while the application is in the background.

  Concerning

  Bika

• TREE, link to another page in the application without authentication

  Hello

  I'm working on APEX 4.1.1 , I used region of the tree to make my menu of the application. My problem is in all parts of the tree, I do a redirect to a specific page ID (in another application), and I'm trying to do an automatic authentication, but his does not work:

  My region requestio tree:

  Select case when connect_by_isleaf = 1 then 0

  When level = 1 then 1

  else                           -1

  end the status,

  level,

  'ÉTIQUETTE' as the title,.

  NULL as an icon,

  "ID_PAGE" as a value.

  NULL as ToolTip,

  M.num_app |': ' | v('SESSION') |': ' | M.REQUEST link

  MY_TREE m

  Start with M.LABEL = 'START '.

  connect prior "ID_PAGE" = "ID_PAGE_PARENT."

  brothers and sisters of order by 'ID_PAGE.

  Suppose that my main application containing my menu tree = 500 and the target page, ID is on the apllication page 501 on page 101 ID of my App ID 501 I add a process header before that get the username and password cookies and call apex API to login.

  Thanks for your replies.

  Yosof

  This thread Re: navigate between two applications in the same workspace without sing again suggests that you don't have to do any coding.

  See what happens when you navigate to a page that is not the login page. A non-public page.

  What I know of the login process, is that it changes the session id.

  Nicolette

• temporarily disable the application?

  Hello
  
  Is there a way to "temporarily cut" an APEX application so that users can not access? It would be useful to do this while you upgrade an instance of Production in order to avoid users who are trying to make changes while the application is being updated.
  
  Thank you
  Steve

  Steve wrote:

  Is there a way to "temporarily cut" an APEX application so that users can not access?

  Yes, the application definition includes properties availability for exactly that.

• EPMA application in the library of the Application Status: "delete pending".

  Hi Experts,
  
  My client was trying to remove an application not used of the EPMA TEST1. The system began to hang.
  
  The State of the application in the application EPMA library was planned as "delete pending".
  
  
  Steps taken to solve:
  
  1. connect to EPMA.
  2. in the application library, right click on the application that poses problem 'TESt1' you are trying to remove.
  3. in the context menu, select "Diagnostics."
  4 EPMA will now run a series of diagnostic tests. Because your application no longer exists in Essbase or HSS, some tests must fail.
  5 when the tests fail, you should get an option to solve this problem, and you must select the option that allows to remove this application of EPMA.
  6 EPMA will then clean up/remove this application.
  
  
  I would like to know:
  
  1. what caused the request of the State "deployed" to State "delete pending". ?
  2. What is the best way to remove an EPMA application?
  
  Appreciate the advice of specialists.
  
  ~ KK

  Hi, I think that "delete pending" is just an intermediate state of the app. If you do not need to see if everything is going in the right direction.
  In your case, there was some technical problems, maybe, perhaps on the server or application-level network.
  There is no program without bugs. So product developers give chance to the bad diagnosis you place via the workspace and hangout for yourself. Otherwise, you need to change status and/or references mannualy in RDBMS
  The best way to remove the application is the simplest also - by means of EPMA or planning