Impossible to get to the beach for additional IP addresses on IPSec Site to Site VPN

Similar Questions

• How can I get all the options for the creation of new titles? I'm stuck on a Board where it does not color or width/size options

  How can I get all the options for the creation of new titles? I'm stuck on a Board where it does not color or width/size options

  If you have not all panels in the Titler then go and reset the current workspace that is located under the window.

• Re: Satellite C850D - impossible to get into the BIOS

  I'm unable to access the BIOS on this machine. I tried (a number of times) by pressing the FN and F2 and FN and F12 keys while the Toshiba logo is displayed. Unlike the Satellite A500, I have, no prompt for keys F2 or F12 doesn't appear at the bottom of the screen showing the Toshiba logo.

  I tried F2 and F12 keys without the FN key, but still no result.

  I need to be able to boot from the CD drive, but cannot get the BIOS to add this record to the boot sequence.

  Help pls.

  Rod.

  If you use Win8 you must make full stop at first. How to do that you can read on http://aps2.toshiba-tro.de/kb0/TSB2B03EY0002R01.htm
  After the full stop restart your machine and press F12 to get into the boot menu. There, you can choose which device can be used as first boot device.

• Impossible to check on the drivers for my HP PC...

  I have a HP model #p6213w pc, and I recently got an error message about a product intel. When I checked and asked about the Intel site, they said to ask HP. When I tried here, they asked for money, and because I don't have the amount of money they ask for because of my disability and unable to work, I need to find the solution myself. As a long time customer HP, I thought they could at least look at their own Web site for questions, but I guess not... I asked on the phone and they me signed out... lol. In fact, on the Intel site, it has shown that 2 of the products intel on my pc needed an update for them, but when I check here, this is what I get:

  http://h20180.www2.HP.com/apps/error?h_lang=en&h_cc=us

  and also it says this too sometimes:

  http://h20614.www2.HP.com/ediags/GMD/ProdDetect4Mozilla.aspx?LC=en&cc=us&product=4006887&tmp_weDest=...

  Basically, it sends me to a page of driver and software which States: "PAGE not FOUND". Thanks HP for not providing driver and software I can myself check on your website. So unless I'm paying money, I cannot confirm that I need of drivers or software for my pc.

  I also tried to check through the two driver update via internet and windows update for drivers, but they both say the pilot who is on my machine is more current, but I got this error message:

  A problem with the Intel Rapid Storage Technology technology

  Intel Rapid Storage Technology Technology has stopped working properly.

  A newer version of this software is available for download that resolves this problem. Intel recommends updating to take advantage of improvements to stability and security.

  Press or click on to download the update on Intel site

  As you can see... I get errors with stuff for intel on my pc. I've already talked to intel, and they sent me here... I guess that patients are sent to intel, calling even on this forum, so I ask for help please... Thank you!

  Hello:

  Here is the link to the support page and drivers for your PC.

  The latest drivers that will work on your model listed.

  If there are no more recent than what you already have, then the drivers are up-to-date.

  http://h10025.www1.HP.com/ewfrf/WC/product?product=4006023&CC=US&DLC=en&LC=en&Query=p6213w&Tool=

  Latest drivers only possible, you could install is the chipset driver Intel as well as the driver of the RST to the links below.

  https://Downloadcenter.Intel.com/Detail_Desc.aspx?AGR=Y&ProdId=816&DwnldID=20775&keyword=chipset+installation+utility&lang=eng

  Use the third file listed for the pilot of the RST.

  https://downloadcenter.Intel.com/Detail_Desc.aspx?agr=Y&ProdId=2101&DwnldID=23060&Keyword=Intel+Rapid+Storage+Technology+(Intel+RST) & lang = fra

  The only driver that works is one on the support of your PC and driver page.

• All of a sudden, impossible to get on the network with PDA

  I have an office of cable to a WRT610Nv2 with 2 desktops on the network wireless.  I used to be able to jump on and off with my PDA and Netbook... now I can't.  PDA reports a 'Yin-Yang' symbol and the symbol of encryption at the network location... I think I somehow locked me out... help please

  Chuck

  Forgot to mention, basic wired computer and two desktops wireless are still working fine.

  Thanks for your reply, but turn the appliance market has not solved the problem... to dig around, I finally found that MAC addresses on my laptop had inadvertently been filtered by software... it sure was not easy to use.  I don't know how it happened all of a sudden, but when I "allowed" those blocked from MAC, everything was fine and I was able to get on the network with my PDA.

  Kind regards

  Chuck, CABGx3 + AAA

• Impossible to get to the desktop after log in

  My husband can log our computer, but once it gets to the screen of tiles, it leaves him choose whatever it is, including the office.  This has never happened before, so it's a new problem.  I don't have this problem and everything works fine under my login.  I tried closing and the search for high and low on the web a solution but found nothing about this problem.  I would like suggestions. Thank you.

  Hello

  I'll be happy to help you with the problem you have with the computer. I understand the frustration when things do not work as it should.

  1. don't you make changes to the computer before the show?

  2. What is the brand and model of your computer?

  Please follow the below troubleshooting to solve the problem:

  Check the question in Mode safe mode with networking:

  http://Windows.Microsoft.com/en-us/Windows-8/Windows-startup-settings-safe-mode

  If you do not have the problem in Mode safe, start the computer in a clean boot and check.

  I suggest you follow the link below to find out how to place the computer in a clean boot.

  https://support.Microsoft.com/kb/929135

  Note: Reset the computer in Normal mode once you have completed troubleshooting as a result of the "How to reset the computer to start normally after a boot minimum troubleshooting" section of this article.

  Just reply with the results. I'll be happy to help you.

• Impossible to get on the adobe servers, please check your firewall settings and try again in a few minutes

  Adobe Creative cloud continues to print this message and allows me to install in apps "Impossible to reach on the adobe servers, please check your firewall settings and try again in a few minutes" pls help

  Please read https://forums.adobe.com/thread/1499014

  -try some steps such as changing browsers and disable your firewall

  -also clear the cache of your browser if you start with a fresh browser

  -check the file hosts for blocked entries https://forums.adobe.com/thread/1912777

  http://myleniumerrors.com/installation-and-licensing-problems/creative-cloud-error-codes-w ip.

  https://helpx.Adobe.com/creative-cloud/KB/creative-cloud-desktop-application-failed.html

  http://helpx.Adobe.com/creative-cloud/KB/failed-install-creative-cloud-desktop.html

• Import image - error 'cannot get all the files for this device. "

  Try to import images from my camera - Canon T3i.  Using both the SD card inserted into a reader and camera with battery connected USB Gets the error "unable to get all the files on this device. Please make sure that the equipment is connected correctly, or that the battery is charged. Files that have been achieved so far will be sent to multimedia elements. "All updates installed, running Vista x 64, 10 elements.

  Okay, found the problem.  Apparently the PSE does not like RAID1 arrays, which is a bit ironic, beings that she deals with photos, and people tend to do not like losing pictures.  Newho, if anyone has this problem in the future, as workaround for Adobe not have their stuff together, rather than import directly to a RAID 1 has HARD drive table, import them on another drive, then copy them to your RAID array.  Very disruptive and I wish adobe would just fix their problems (no other program has this issue, even video editing software... «and RAID 1 should really be used for that), but to use it as a workaround if necessary.»

• Impossible to get in the photo editor

  When I try to go to the photo editor that I sign in I have to do to get to the photo editor and why I registered my software

  More necessary info. What version of the EP and what operating system?

• Impossible to get in the app store for Windows. -Windows 8 (laptop is an HP with core i5) but cannot download windows 8.1

  I use bing weather onmy tiles page.  Yesterday, I tried to download Foxfire as I had problems with IE and my Bing stopped at update time.  I uninstalled it and when I tried to reinstall the weather app told me to go to the store of windows for an app for that.  When I did the windows app store has been very slow to open, and then finally he said that I could not access due to the connection internet (I have a strong signal) or a time out.  Any ideas on what to do next?

  Hi Steve,.

  1. are you able to access Web sites using web browsers?
  2. using connection proxy to connect to internet?
  3. What is the security software installed on the computer?
  4. have you made changes on the computer before this problem?

  Method 1: Run the network troubleshooting and check if you can connect to store.
  a. press the keys Windows + C on your keyboard to show the charms.
  b. type Troubleshooting , and then click solving problems under settings.
  c. now, tap network troubleshooting in the option Search .
  d. click utility troubleshooting network to run the troubleshooter.

  Method 2: If you use a proxy connection, then try to disable the proxy, then check if the problem persists.

  a. open Internet Explorer
  b. click on the Tools buttonand then click on Internet Options
  c. click on the Connections taband then click LAN settings
  d. uncheck it Server Proxy use.
  e. click on apply then Ok to save the changes.

  Now, check if you can access store.

  Method 3: Reset store cache.
  Follow the steps and check out them.
  (a) right click on the start screen
  (b) click on run
  Type c) in WSReset.exe
  (d) press enter
  (e) restart the computer and check.

  I hope this helps. Let us know if you have other problems with Windows in the future.

• My MacBook Air is stuck in the whole, after leaving hanging with the beach for a good 2 hours ball I forced to close. Now, she does not restart and I'm getting one on the screen after it tries to start. Any solution?

  This is what my screen shows:

  

  Screen of Mac OS X - grey or prohibitory sign appears during startup

  Install or reinstall OS X from scratch

  Make sure that you have backed up your files because the following procedure will remove all of the hard drive.

  HD recovery start:

  Restart the computer and after the buzzer, press on and hold down the COMMAND and R until the menu screen appears.

  Erase the drive:

  1. select in the main menu disk utility and click on the continue button.

  2. once the charges of THE select your boot volume (usually Macintosh HD) in the

  list on the left. Click on the Erase tab in the main window of THE.

  3. set the type of format Mac OS extended (journaled). If necessary, click

  Security and button all the option data from scratch in a single pass. Click

  the clear button and wait until the process is complete.

  4 leave FROM and return to the main menu.

  Reinstall OS X: Select reinstall OS X and click on the install button.

  Note : You will need an active Internet connection. I suggest to use Ethernet if possible

  because it is three times faster than wireless.

  This should install the version of Mac OS X that you had installed it.

• Satellite P100 - impossible to get all the sounds

  Satellite P100

  When I updated the new driver for the card its conexant it cause its failure. I drove behind the driver, and then all is well again.
  Little pain and I've hidden the update.

  Toshiba has changed the hard drive and now I am totally unable to get any sound. The volume control is not the issue and the Device Manager shows no problems.
  All seem well except that I have no sound.

  Any help is welcome.

  Hello

  What operating system you use, and you have installed the laptop using the Toshiba Recovery disk?

  If you use Windows XP you have two install two hotfixes from the Microsoft Knowledge Base: KB835221 and KB888111.
  Two updates are integrated into SP3 and you need to install the patches first, and then the driver.

  In addition, you should try to install the latest driver on the Toshiba site:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  Last but not least, make sure you use the latest version of the BIOS.

  Welcome them

• First AID (10.11): "impossible to turn up the volume for the repair, the operation failed."

  Hello everyone

  I think I'm in trouble here...

  After I did a clean install of 10.11 two weeks ago, my Mac Pro 3.1 (2008) began to take a long time to boot up to the desktop. The actual load of the operating system (with the progress bar) is fast, but it takes a while (minutes) to enter my password until the computer is accessible at the level of the office. I have almost nothing the autostart value in Sys Prefs users.

  The startup disk is two SSDs over a Sonnet Tempo Pro and the folder of the user is on a separate HARD disk.

  Because the slow pace is the point where to enter the password, I thought that there could be a problem with the folder of the user HARD drive. I had my user folder on a HDD separated for the last several iterations OS X without problem, but in the fall, I needed more space and bought two new 3 TB drives (one for the clone SuperDuper). They ran very well in the Mavericks.

  When I run THE first AID on the volume that contains the folder of the user, I get the following error (it does not appear if I run first aid on the HARD drive itself):

  "First aid process has failed. Save if possible data on this volume. "The details section of the dialog box reads:

  "Update support partition for the volume to the need

  Impossible to disassemble for repair volume

  Operation failed... »

  Worrying, I get the same error if I run first aid on the volume of the other 3 TB drive that holds the user folder SuperDuper clone.

  I suppose that the two new 3 TB drives may be failing at the same time, but it seems a bit unlikely. Does anyone have an idea of what other causes, there could be for these errors?

  I would be very grateful for any help, as this is my main machine. Thank you in advance,

  EDIT: I realize I should have posted this in the OS X El Cap - my apologies for this forum. Also, I find this recent thread that seems to suggest that there is a bug in Dug, I get the same errors when I run first aid on my other two internal drives.

  Philippe

  BTW, I tried to start in safe mode, but that has not changed anything. Also, I created a test (with the record on the striped SSD) account. Representing loads very fast after that I entered the password.

  Thanks in advance again

  Philippe

• Adobe Elements - problems getting past the display of additional information

  I just downloaded the trial version of Adobe Photoshop Elements 10 & Adobe Premiere Elements 10 because I want to give it a try before you buy it. I have a id Adobe and ID and when I get it on the main screen need me a pop called 'your account '. This screen shows, "we have identified your Adobe ID account successfully and you are just a few benefits not fresh. Please fill in the following information. Then it askes for my date of birth, to enter a personal URL and two boxes for the privacy policies and terms of use.

  Throughout the process the update account button down is gray. I enter all the data requested and the button never lights. I can't send my data because the button remains grayed out.

  Any ideas?

  .

  Jeff asked if anyone is able to connect to Adobe.com. This form of additional information which maintains and Adobe.com account was found. However, what he is now trying to do is create a Photoshop.com account. Someone at - it tried connecting Photoshop.com and check the process here? If you are able to successfully complete the process of connecting to Photoshop.com, then you should be able to bypass this screen for more information.

• can not get on the internet for download readers updated for vista

  I just received a computer laptop windows 7 and need to know how do to download windows vista HP driver updated on my W7 so that I can download on my vista desktop.  I can't online with my desktop vista because drivers must be updated.  Can anyone help please.  ruthmarck

  Tip: Only get necessary updates the driver from the download page of the device manufacturer or the computer, NEVER update Windows (that is, hide driver updates available through Windows Update).

  If you need assistance with your Vista computer, post in this forum: http://social.answers.microsoft.com/Forums/en-US/vistanetworking/threads

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft