white around black lines

Similar Questions

• AI traced vector gets white around content lines when it is pasted into photoshop

  I wonder if anyone knows why when I paste a picture of vector traces in photoshop, little white lines appear around the pieces of separate paths? Here's what it looks like when he looks at one in AI CC:

  

  And here's how the same image, now a chip image pasted into a photoshop CC file looks like:

  

  What do you think? Thanks for your help!

  Oh wow, I just mean that I just answered my own question! This happened when I tried to cut the entire image in half by drawing a line down to the Center, then choosing "divide" of pathfinder. Of course! It divides small forms that make it up. Duh!

• PNG8 has white around transparent lines, only when zoomed out on mac / ipad

  Here is my site:

  http://smartpeopletalkfast.co.UK/pp/

  The shop by the menu "category" consists of images, some of them PNG8 with transparency. Normal zoom, all right, but when I Zoom in on my mac or my ipad I get white lines on the border of the transarency.

  How can I fix?

  Thank you

  OK well it's always a flattened PNG, not a Fireworks PNG in layers. No text or vectors, just a flat bitmap. In any case...  I opened the file.

  You selected a matte white color.

  Matt color can ruin the edges of the transparent in a file of anti-aliasing, because FW tries to mix the pixels of contour with matte color of designated. In the original FIREWORKS png file, set the matte color to no color. EXPORT (save or save as) the file.

  But I think your guilty in this case is perhaps not a matter of mast, assuming that this file is what is currently used on the web site. I noticed when changing the color of the cloth for the tests that there is a beige pixel wandering in the upper part of the background.

  

  Because it is already an alias file, there is no noticeable difference when I export (other than the stray pixel, that may be the problem, what you are referring.) I zoom out, as far as I could on my Mac in Firefox and Safari and seen without white edge, probably due to the tough anti-aliasing on the supplied file. Below shows the file re-exported with and without mast. Yet once, Matt is not a problem with this example because the edges of the image are already aliased. Results can be different from a folder containing smooth contours.

  

  This article may be useful: http://www.communitymx.com/abstract.cfm?cid=54550

  While I concentrate on the transition to PS in the article, the concepts are still topical for what you do. I also list a bit more links section at the end of the above article which may help as well.

  HTH

• White and black, moving line around work plan

  Whenever I'm in PS, I have a white and black line moving around the artboard.

  I was wondering what it is and how to get rid of. Thank you

  This is the outline of your selection. To get rid of, choose Select > deselect.

• Black line around my entire screen

  I have a Windows 8 and I started my computer up one day and my monitor has a black line all around him, my screen resolution of setting has no effect Please HELP

  Hi André,.

  Thank you for visiting the Windows community to post your question.

  To help you with the problem, we need more information. Please answer the following questions:

  1. What is the brand and model of the computer?
  2. Did you of recent changes made to the settings on your computer?

  Please post detailed screenshots. Please see this link for assistance with the download of the screenshot.

  While you answer, you can refer to this link: get the best display on your monitor

  http://Windows.Microsoft.com/en-us/Windows-8/get-best-display-monitor

  Response with above information to you help the better. We at Microsoft tender towards excellence.

• How to create a black line around a photo in a slideshow?

  How to create a black line around a photo in a slideshow? For this photo I made in Photoshop, but is there a way to do it in Muse so I didn't need to adapt to all images?

  

  Hello

  You can select the Image of hero and apply the stroke to the toolbar, as shown in the screenshot below.

  

  Please let me know if you are talking about something else.

  Concerning

  Vivek

• Trace image invert the colors, showing the black lines in white on black background, helps!

  I used the feature to trace of image for the drawings to the mark several times without any problems.  Today, it is worship the colors, the black lines are now white and white background is black. Help?

  Also for some reason today when I would stick a picture that I copied from Photoshop it would stick much more than the art Board and original. No idea how to solve this problem, or why she is acting funny today?

  menusplus,

  When things become suddenly strange, it may be interesting to try to list.

  The following is a general list of things, try when

  (A) the question is not in a specific file,

  (B) you have a printer installed, connected and turned on if it's a physical printer (you can use Adobe PDF/Acrobat Distiller as a printer by default without the need to have a printer on, of course you will need to specify when you really need print on paper), and

  (B) it is not caused by problems with opening a file from external media (see below).

  You tried/made some of them already; 1 and 2) are easier for temporary strangenesses and 3) and 4) specifically preferences might be corrupt); ((5) is a list in itself and 6) is the last resort.

  If possible / there is, you must record a current work first, of course.

  (1) close Illy and open again.

  (2) restart the computer (you can make up at least 5 times);

  (3) close Illy and press Ctrl + Alt + Shift / Cmd + Option + shift during startup (easy, but irreversible);

  4) move the folder (follow the link with this name) with closed Illy (more tedious but also more thorough and reversible), for CS3 - CC you can find the file here:

  https://helpx.Adobe.com/Illustrator/KB/preference-file-location-Illustrator.html

  5 look through and try the relevant among the other options (click on the link with that name, item 7) is a list of the usual suspects among other applications which can disturb and confuse Illy, point 15) applies to the maybe CS5, CS6 and CC);

  Even worse, you can:

  (6) (check the box to delete the preferences), run the cleanup tool (if you have CS3/CS4/CS5/CS6/CC) to uninstall and reinstall.

  http://www.Adobe.com/support/contact/cscleanertool.html

• Visible, thin and black lines around the layer mask.

  Hello, in a current project I'm finish, there visible, thin and black lines around the perimeter of each layer. These layers have layer masks. I tried to merge the layers (shift, ctrl, alt + E) and flattening, but the lines are still visible. Help, please!

  Thanks in advance!

  Photoshop CC

  Windows 8.1

  3.7 ghz I7

  64 GB of ram

  1 gb player/os ssd

  16 TB Raid 3 array work / scratch

  You must read and watch tutorials masking. Look at sites like Russell Browns to topics such as advanced masking and extraction and practice. Sometimes its inpossible create a very good mask in these cases, you need to fix it

  

  

  full size link http://www.mouseprints.net/old/dpr/TryHard.jpguse open the link in a new window or tab.

• HP Officejet Pro 8600 Premium: Printer leaves black lines during copy and scan from ADF

  I know this question has been asked several times, but whenever I try to copy or scan from the automatic document feeder, it leaves black lines on the copy (with the document on the works of glass like a charm).  I've read through the forums and have tried the advice to unplug the machine and so on, but none of these suggestions work.  Any help would be appreciated.

  Hey @Huskers1,

  Welcome to the HP's Support Forum!

  I see that you have some problems with a line when copying from the document on your Officejet 8600 Premium feeder e-all-in-one printer. I can help you with that.

  To start, make sure that the printer is plugged directly into a wall outlet, not a surge protector. Once done:

  1. Get a little water and a lint cloth.
  2. Open the left upper part of the printer, where the document since the charger goes into the printer. It should open up as you opened a book.
  3. With your damp cloth wipe the rubber stamp, the rollers in the cover and the casters on the bottom of this section.
  4. Again open the left side of the printer, as you opened a book.
  5. With your damp cloth, wipe the rollers, you will find inside this section.
  6. Close the upper sections of the printer and open the flat section.
  7. With your damp cloth wipe the rollers and the white bar you see on top of the printer
  8. Clean the glass on the left side of the printer.

  Once all the pieces you cleaned dry, please let me know the results. If you remove the line, click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

• How to get rid of the black lines on the printed and scanned documents

  When I print, copy or scan on my officeject 6500 wireless I get a black line to the bottom of the page.

  While I wait for your answer, I'll post the most likely cause:

  Lift off the cover.  Now lift the document feeder cover, it opens to the left. You will see the mech feeder, you want to raise that to the left as well, it will increase by 2 inches or more. See this article from underneather glass it? Clean it. Really good.

  Then see you the white piece of plastic above the glass, which clean really good too.

  If it is a perfectly vertical line, in that it's probably caused by some dirt here, what is happening is the seat of bulb scanner in one place, the paper is then slipped over in the same place. If there is a grain of dust, it covers the entire page, top down. You clean the white room because there might be dirt there, when the bulb shines through the paper, he thinks returned as a dark spot.

• White with vertical lines colored on Equium A60

  Hello

  I'm new on this but really need your help. My laptop is around the age of 18 months and has always worked well. Last week, I plugged modem broadband via Ethernet cable and configure the broadband services. A few minutes after doing this, when I looked back to the screen, he went all white with vertical lines colored it. I rebooted the machine etc and that's all I ever get now. As soon as I turn on, it will just right to white with these colored vertical lines.

  I tried to connect an external monitor to it and that works very well. The laptop is a Toshiba Equium A60. I'm worried that the screen is burned, it is possible for a power surge or something like that to go down the Ethernet cable and the screen shot?

  Thank you

  Adrian

  Display features has nothing to do with the Ethernet cable. Test with external monitor is very good, and on this way, you can see if the graphics card is perhaps responsible for that.

  From your description, I think that the view is the problem. Of course, just intensive display test can give more answers.

• Black lines on the right side of the printed document Hp 8600 N911g

  I have problems with my HP 8600N911g.  I have several vertical black lines on the printed page of right hand margin.  This only happens when I copy or scan. Printing from my pc is fine.  I did all the cleaning, cutting for over an hour and reset to factory default.  NOTHING WORKS.  Help, please.  I love the printer hp but tire of their problems, which are few, but when they occur, they are doozies.

  I am on Windows 7

  Hi peggymay.

  Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

  Sorry to hear that you are having problems with black lines on your scans or copies.  I had this problem myself on my 8600 very clean and I was able to get it to be resolved. The question arises in fact from two locations and with a little luck, we can get this problem solved for you. First thing to look at is under the hood of the scanner. Lift the cover on the left of the large scanner glass and scanner, you will see a small strip of glass. Take a glass clear cleaner and a lint cloth and clean the small glass placed as well as the large glass. On the underside of the lid, you will see a white plastic strip. Please clean it as well. IF you have already done these steps please proceed to the next step.

  The printer power cable must be connected to a wall outlet and NOT a power strip/Bar. HP printers have built in surge protector and if you have it plugged into a strip/Bar, the printer will NOT get all the power needed for the proper functioning and it will cause problems with scans or copies, and it might even generate false error messages on the printer screen.

  Please try these steps and if they work, fantastic. But if they are not, please do not hesitate to write me again.

  I thank very you much for your time.  Always happy to help.

• HP ENVY 5660: Solid black lines/blocks more data of a personal nature

  Printed documents have black lines solid or solid black boxes in the sections of the printed page.  They usually appear on boxes containing personal data (name, address, account #, etc.).  Usually occurs when printing statements of third-party websites.  Occurs when printing black and white only and when printing color.  Printer is calibrated and not other issues.

  Any thought oh what is causing this and how to fix?  Thank you.

  Change the browser alleviates the problem.  No problem with Internet Explorer.  Question using Google.  Thank you.

• Vertical black lines in middle of page

  Hi people,

  I have a LaserJet 4250n printer which has slight black spots / vertical lines in the middle of my pages. It is at the bottom, but it gets lighter in some points and again takes upward. I tried to replace the toner cartridge and cleaning of the rollers, nothing helps.

  Any ideas?

  Thank you!
  James

  Hi James,

  I am a technician in Australia HP printer and an employee full time. I deal with many printers with this one.

  Lines to the bottom of the page can be caused by a few things - according to what looks like the line.

  If it's a dirty dirty streaky brand constantly at the bottom of the page, migh you have a dirty oven - it may have been picking up toner and it has put in place and then put it down on paper.

  A thin black line set can be a scratched or developer - drum laser could be refraction and drawing the defect on the drum.

  Blank or white lines could be something stopping the toner to the study - under the toner transfer roller may have something stuck on this issue.

  A repeated mark or default could also be a dirty oven - glue or wax envelopes and labels could do.

  Try changing the toner with others to test - if you can borrow one.

  Make 3 or 4 cleaning pages - in the menu, configure device, menu printing, cleaning page to create/process quality.

  Remove fuser - door back comes, little blue clips, pull it. out - rotate using the green button and you might be able to gently remove something stuck in it.

  If you can get to an another 4250 / 4350 you could borrow from the fuser and know.

  For this machine, I find used ovens and dirty printers more often these symptoms.  Good next is of poor quality after market cartridges.

  Hopefully I can help you here

  Steve Hewitt

  HP Australia

  Melbourne.

• How to get rid of a black line

  Hi I'm new to illustrator and have done half of my work a color using the rectangle tool. I now have a black line on the edge of this color. First what I did wrong to find it and second how do I get rid of him?

  Thank you, Catherine

  Select the rectangle and check if you have a line on that? That means a white file with us back race.

  

  Ant you to click on the line to put this in the update (above), then click the anti icon to remove the feature of ra result like this.

  

  If you need more information, we will need a screenshot because there are not enough details to help you either.