White falls when the file is printed.
I have a white logo on a dark background. The logo consists of a mark with the text below. When the file printed brand appeared, but the text does not. It's on my record, my screen, my internal evidence, the final pdf and proof of the printer. The only place where that he gave was on the final printed piece...
I had happen in the past with other logos and told me that the fix was to always use files .ai and .eps not. I was also told to add 1% of another color to any all white illustrator. These changes appear to have worked in the past. I did these two things to this file and it still gives up.
The final file was built in InDesign and has been provided to the printer as a PDF, high resolution and a collected file.
I'm using CS5
Thank you!
You want the box to overlay disabled for all white objects in Illustrator.
Tags: Illustrator
Similar Questions
-
Re-read in values in the measurement file when the file is updated
Hello
I'm trying to control a power supply with labview and adjust the tension. I currently work reading in a file and measures affecting the value in the file. I now have the question I want to update this value when the file is modified, as read in the file again when it is updated and set the voltage again. I've tried several things, but if I put the file in the while loop, then it plays once and then returns 0 after the first loop. Outside the while loop it reads only the initial value.
I'm quite new to labview so any help would be appreciated.
Thank you
E
You can use the File Info VI for the time that the file was modified. If the time has changed, read the new values.
-
I use a laptop and move between two locations each with its own printer. Whenever I move, I have to change the default printer by opening printers & faxes from the control panel. Is it possible to have windows to automatically select a spare printer by default when the selected default printer is off line?
Hi Tom,
If the default printer is not in offline mode, it will detect the different printer but it will not be a default one.
-
Right mouse click when the file name of MS Explorer results saying that he has encountered a problem and will stop, and it stops quickly.
Right click issues are usually caused by a third-party software that put an entry in the context menu. You can solve this with the free ShellExView.
http://www.nirsoft.net/utils/shexview.html - ShellExView
Make a right-click is slow or weird behavior caused by context menus management - http://windowsxp.mvps.org/slowrightclick.htm
Manage the entries in context menu for folders, readers, and the Namespace objects - http://windowsxp.mvps.org/context_folders.htm MS - MVP - Elephant Boy computers - Don ' t Panic! -
Original title: computer viruses.
If I have a virus and I restore my computer, the virus will come back to the computer when the files are restored.
Hello
to be Safe side scan always media files are on before you reinstall your data
using drives flash etc is a well known to transfer viruses, etc.
-
Look for the timestamp when the file is moved
I want to find when my file is moved from one folder to another folder with in the same drive. Suppose I have a text file and I just cut this file to a folder and paste to another folder, but in the same drive then I see that none of the date changes i.e. Date_created, date_de_modification, Date_Accessed. Could any body tell me how can I identify when the file is moved from one place to the other place.
Can anyone help please as it is necessary in an emergency.
Thanks in advance!
I suggest you do this:
- Change the first two lines of the script more far down to suit your needs.
- Save the script as Filemonitor.vbs in an appropriate place.
- Invoke the script from a command prompt. He will continue to run in the background until you press Ctrl + C.
- Add a file in the target folder. Within 10 seconds, you should see the output in the log file.
- Add the name of the script to your startup or logon script so that it runs automatically.
sTargetFolder = "D:\Test."
sLogfile = "D:\Log.txt".Set OFSO = CreateObject ("Scripting.Filesystemobject")
«sFldr = "" "" & Replace (sTargetFolder, "-","-") & "»
Set oWMIService = GetObject("winmgmts:{impersonationLevel=impersonate}!\\.\root\cimv2")
Set cMonitoredEvents = oWMIService.ExecNotificationQuery _
("SELECT * FROM __InstanceCreationEvent WITHIN 10 WHERE" _)
& "Targetinstance ISA"CIM_DirectoryContainsFile"and"_ ".
(& ' TargetInstance.GroupComponent ='Win32_Directory.Name = "& sFldr &" ' ")
Do
Set oLatestEvent = cMonitoredEvents.NextEvent
Set oLog = oFSO.OpenTextFile (sLogfile, 8, True)
oLog.WriteLine Date() & "" & time & "" & Replace (oLatestEvent.TargetInstance.PartComponent, "-","-" "")
oLog.Close
Loop -
When the files of ingestion, prelude does not see an entire tree.
When the files of ingestion, prelude is not going deep enough into my directory tree.
It seems to stop at the 5th level of the root. I have structures down 8 levels on some directories.
First Pro sees OK because it uses the Windows Explorer interface, while the prelude has its own file tree interface.
I have set up a situation of test, and Prelude didn't hurt to follow along the line... eight files down, was always fine...
The only thing you could check... notice the "consider as ' box top-right? That should be "list of files" to continue. In file earlier, I got a clip CinemaDNG, and he wanted to change to "As DNG" here. And would not go further down in the directory as this file until I changed the setting for this folder. It is because for a number of file formats off camera, regarding the CinemaDNG and some of the Arri, RED and other formats, the images are more than one type DPX where each image is a separate file, as written on the disc, so a file is actually a logged clip. So, "show you" prelude where the image folders, and she knows to show those clips, not as a bunch of still images.
Then you have some of these formats as shown on this "as:" in the drop-down list in these records? If so, there is your problem. You may need to change your storage scheme.
Neil
-
What kind of image is in a document. INDD so when the file is opened you get the message 'document contains 6 links to sources that are missing' and when you click OK to recreate a link to missing files, the document opens with the images? Missing images are not on my computer, but when the document opens the images are there. I can copy and paste the INDD images in Illustrator. Y files/images/I am able to copy and paste the images that have been incorporated into the INDD file in AI of the INDD file? If this is not what type of image am I copy and paste? Can I take the images that I stuck in there and place them in a new INDD document and have the images to reproduce without problems?
The images could be anything - check the links Panel.
What you see (and copy) is just the screen preview, not the actual image data.
-
How to know when the file attachment appears its visible or hidden
Hi guys,.
Sorry for my English.
In my scenario, I have two button to open or close the display of attachment with the script file 'app.execMenuItem ("ShowHideFileAttachment");'.
But I don't know when the file attachment appears its visible or hidden or detect when the user clicks the show / hidden in the view.
Everyone knows?
Thanks in advance.
ZAMPAZAMPA.
You can do the following:
var obj = this.viewState.toSource().split(","); if (obj[1].replace("overViewMode:","") == 7) { //Your code here... }
-
When you insert a click on a slide box, you are given the option to choose what happens "on success". I chose to open a file or a URL. When I press F4 to display a preview of the slide or a file, the links work correctly. But, when the file is completely released on a Flash SWF/HTM file, it does not work. The click box is here (Colombia-British hand appears), but no action takes place when it is selected. Please notify. Here is a screenshot.
Hello
The Captivate main page probably visited before validation is a landing called stickyzone.
Unfortunately, you seem to have missed this area. If you had clicked on the topic frequently problems, you would have found your answer!
Please see this topic using the link below and you will find your answer.
Useful and practical links
Captivate wish form/Bug report form
-
I TRIED TO RE-INSTALL MY HP WIRELESS PRINTER AND IT WOULD NOT INSTALL. I HAVE RECEIVED AN ERROR MESSAGE THAT THE PRINT SPOOLER WAS NOT WORKING AND STOPPED. I have TRIED TO START THE PRINT SPOOLER AND FOUND what IT MISSING THE lexbces.exe FILE. I THINK THAT WHEN I UNINSTALLED THE HP PRINTER, HE WALKED OUT OF THIS FILE. IT IS IN THE SYSTEM 32 AND A FILE OF REMOTE PROCEDURE CALL. DOWNLOAD THIS FILE OR DO I HAVE TO RE-INSTALL WINDOWS XP?
Lexbces.exe is from Lexmark (or Dell-badged Lexmark) printer install. When the Lexmark printers are installed, they configure the print spooler to depend on Lexbces. Unfortunately, when you uninstall the software Lexmark, the uninstall program removes the file but does not have the print spooler dependency.
Open a command prompt window (start > run > cmd > OK)
Type the following line in the black command prompt window and press enterdependent on the spooler of sc config = RPCSS
Note that there is no space before the = but there is a space after it.
Restart the computer.
See the instructions on One Article to do a clean installation of your printer.
After the restart, you can check that the print spooler has started in several ways. One way is:
Open a command prompt window and type the following command, and then press ENTER:
spooler request SC
You should see the following in the command prompt window:
spooler request SC
Service_Name: Spooler
TYPE: 110 WIN32_OWN_PROCESS (interactive)
STATE: 4 RUNNING
(STOPPABLE, NOT_PAUSABLE, ACCEPTS_SHUTDOWN)
WIN32_EXIT_CODE: 0 (0X0)
SERVICE_EXIT_CODE: 0 (0X0)
CHECKPOINT: 0X0
WAIT_HINT: 0X0 -
CS3 Mac: Text white becomes black when the file is reopened
System: PowerBook G4, Illustrator CS3.0.2 and OS 10.4.11I have attached a sample (only 85ko) in this position, and there is a to http://homepage.Mac.com/tlmurray/filechute/WTTB_sample.AI . The sample has two layers. The background is black and locked; the top layer contains the text. This sequence illustrates the problem:- Launch Illustrator and make sure that the Panel of colors and character Styles Panel are open, and you are in preview mode.
- Open the example file. It appears as a black rectangle.
- Select the text by area or by i-Beam, is not serious. The text covers the rectangle, so you can target anywhere.
- Note the character Style Panel. You will see that the Normal Character Style entry does not have a sign, Illustrator, says the text matches the style +.
- Redefine the Normal Character Style by double-clicking it, choose the color of characters and click the shade of white.
- The text becomes white. Good so far.
- Save and close the file.
- Reopen the file. On my system, the text changes to black.
Another similar sequence is to transform the white text by clicking on the white background in the color Panel or swatches, the accomplishment of a "Redefine character Style" in the list of options panels.
Anyone see this? Y at - it a trick I'm missing?The problem isn't your Style of character!
The problem is that your white is not a color.
To see this, when you open your character styles and choose your "hue" white, is dimmed, since you can only color tint.
To resolve this issue, double-click your white swatch so that it opens the box of color options. under the colour / spot color box check the option of 'Global' .
Now, close the box options and go to you style of character and select white, you will notice color is now available.
Close and save, problem solved
He will explain why white resets, since illustrator does not recognize it as a color and the default values in black. However, every time you do one other color it is resolved and what makes the only consistent problem with the shade of white.
Tested and worked for me. Hope it solves for you.
-
Avoiding Rich black in the files for printing
Situation: One our vendors with which I work is printed paper, which suggests no black rich in PDF files or files HAVE.
Problem: Despite a palette limited (in which I use 100% black, white and a range of primary colors), the definition both a Rich Black element seems to find its way files in my working file HAVE (and there PDF for printing). I noticed this happened sometimes when I copy the text (or elements of black color) since another file I and then paste the items into the file, I'm working on that. It seems to happen only a few times. Outside by clicking on each black element - to research on the artboard and it controls in the color window to see only the black is 100% and CMY are all 0%, it is a surefire way to avoid the intense black in every capacity (especially in the fine print)? I saw the appearance of the black panel, but which seems to deal only with the screen devices and output RGB.
Any help or advice is appreciated! I would like to solve this problem.
Side-note: I use CC on a Mac.
Check your files in Acrobat format.
Use the separations Panel in Illustrator. Disbling the rear channel should give you a clue that is opposed to inspect more
-
white arrow in the files of the executable
Hello everyone!
I have problem creating executables. I want the files does not start to run until the user do not write parameters. So I want that the user could fillful some fields and when it ends, he could start the program using the white arrow (as when you run using Labview).
When I create a file I deselect the option to "run when it starts", and I get the white arrow in the executable façade. However, I try to do the same thing with the other files and I am not able. SB. explain to me what are the steps I must take to allow control of the execution user?
Thank you!
You could always run the VI to start, as it is by default and additional code to make the user can control execution:
You can check the values of the fields to make sure that they have been modified, when they all have, run the code.
You may have a ' start' button on your front panel which would be conditional for a while loop to the beginning of your code
You could use a structure of the event and only run code when the user pressed a button of some or certain a field has changed.
-
HP Photosmart C4600 all in one printer, HP, Windows7 desktop. When I try to print copies of old black & white photos, on premium Matt paper or any document (I tried all), with settings for grayscale or black and white, printing starts OK (black & white) and soon begins to print with a reddish tint. I changed the cartridge back & White 3 times with the HP cartridges and the problem persists. I cleaned my print heads, the problem persists, I tried various other parameters without result. Finally, I gave up and I went back to my old Epson 15 year for problem free Photo printing. How can this problem be fixed? Thank you!
When you print graphics color cartridges are usually used to print even black and white. In addition, when printing on the paper color photo is always used as the pigmented black ink cartridge is not compatible with the photo paper.
It would seem that your color ink runs out. See the troubleshooting steps described in this page. Most likely, you need a fresh color cartridge.
Maybe you are looking for
-
How to 'validate' faces?
I'm new on Photos and try to understand how works the faces feature. before, in iPhoto there was a feature where he says "John can be in a 24 additional photos - click here to confirm" and then he grew up a thumbnail view of pictures with a tick and
-
With the recent update, I've now wasted space between the top of my Firefox window and tabs. Is there a way to do this, go away?
-
Can I listen to a movie or a TV show on iTunes store for Firefox
I do not wish to install the app in iTunes on my computer just to watch a video.
-
black screen with no cursor or available bios
I have a HP Pavilion dv7 laptop, which seems to agree, but has a black screen with no cursor. The fan runs for a few seconds and flashing lights show near the top right the keyboad and cap lock button. I pulled the hard drive and tested ok and trie
-
sent mail folder mail junk but not marked as junk
Is filtering some of my mail entering a junk e-mail folder. But this isn't undesirable labelling, so there is no 'not junk' button click to tell him that the mail is not junk. I have reset the junk mail, filtering to try to remedy this, but it did no