white arrow in the files of the executable

Similar Questions

• Win 7 by default, the white arrow and the "cursor corrupted files" pop-up windows.

  Original title: Max the mouse

  I had a little friendly MS mouse pointer / cursor schema greet me on the initialize upward from Win 98 to Win 2000 Milnm, finally to Win XP.  It was simple, little grey mouse that has nibbled cheese if the program was busy.  Since the abandonment of Win XP, I bought a Dell E6440 with Win 7 Pro installed. I used a USB transfer cable / program to migrate settings and files above. My favorite mouse pointer scheme is not. I tried to change my plan of cursor recorded, but Win 7 by default, the white arrow and the "cursor corrupted files" pop-up windows.

  Someone at - he saw this original classic pointer / cursor for Win 7 64 bit?

  Thank you, Mr. Singh. That did not help.  But for the record, I finally found the correct cursor plan I was looking here: http://www.rw-designer.com/cursor-set/mouse download a .zip file that I had bad access to when you change the pointer of the mouse, but resolved by downloading each schema of cursor .ani and .cur individually on the site. I used this from Win 98 to Win XP.

• My Windows Vista computer displays a black screen with only a white arrow to the mouse cursor.

  I have a black screen with only a white arrow to the mouse cursor.  I tried to start in safe mode, safe mode with networking, and safe mode in the command prompt. Each time, I just get a black screen with a white arrow cursor.  How can I get my screen back?

  original title: black screen

  Hello

  Remember to make changes to the computer before the show?

  Try the following methods and check the status of the issue.

  Method 1:

  Disconnect an external device connected to the computer with the exception of the keyboard and mouse and check if it helps.

  Method 2:

  If you have the Windows Vista disc, the computer by using the startup disk and perform the Startup Repair. See the following links:

  What are the system recovery options in Windows Vista?

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista

  Make repairs to the system from the Windows recovery environment.

  http://Windows.Microsoft.com/en-us/Windows-Vista/make-system-repairs-from-the-Windows-recovery-environment-from-Windows-Vista-inside-out

  Method 3:

  If the method above does not solve the problem, then try to perform a restore of the system from the Windows Recovery Console. You can see the link provided in method 2.

• If click the white arrow to run vi, is compiled beforehand vi?

  I have this vague idea that compile LabVIEW means something like the compilation in c; compilation only occurs when you want to build the exe.

  And when you click on the white arrow run button in a Labview vi. The vi will be sorta like VB in interpreted mode.

  But however DRESSED review model, I saw this question on Labview know the data type of the strict definition of type at compile time. This seems to suggest that whenever you run the vi, Labview compiles the first vi. Compilation happens only when you want to compile the exe vi.

  While it is true?

  A normal compiler performs different steps during compilation. Pre-treatment, check the syntax, compilation and the actual link is more or less done only once after tell you him to do.

  LabVIEW split this. Syntax checking is a continuous process while you change influence LabVIEW vis. anything not valid causes errors like broken right during the time of change. Once you press the button run LabVIEW can simply take the diagram and compile into machine code, which is normally so fast that you don't even notice it. When you save a disk LabVIEW VI takes the compiled machine code or creates it if it has not been done so far and he recorded with the VI on the disk. Loading the VI the next time the machine code is already there, at least if you are loading the VI on the same platform and version of LabVIEW.

  If LabVIEW ALWAYS executes the compiled code, regardless of whether you run the VI in the development environment or in an executable file.

  Strengthening enforcement is really mostly just take all the parts already compiled and put them in one place, stripping anything useless such as diagrams and also signs of façade that is never visible. This is of course a simplification very strong, but for the purpose of
  This valuable discussion.

• go to a web page, firefox will pass it to a "file not found" but arrow to the left shows the page then goes back to 'file not found' again.

  for example. Google 'bc spca', choose www.spca.bc.ca and go. Firefox gives me this...

  File not found
  Sorry, the page you requested was not found. Please try again.

  Original URI: /assets/tab_advocate_mo.jpg

  But if I hit the arrow to the left, it shows me the page I searched for a fraction of a second, then goes back to the file not found again. This does not happen with Chrome or Internet Explorer. They go to the appropriate page.

  I am running windows 8.1 and uninstalled and reinstalled Firefox. NO GO. Help, please.

  Generally if an image on a page can not be found, Firefox does not redirect the entire page with an error message. the area of the image is just left in white. If this is not normal.

  On the error page, what do you see in the address bar, if anything?

  To check if one of your extensions could be the culprit, could test some pages from Firefox Safe Mode problem? It is a standard diagnostic tool to disable some advanced features of Firefox and extensions. More info: questions to troubleshoot Firefox in Safe Mode.

  You can restart Firefox in Mode safe mode using either:

  • button "3-bar" menu > "?" button > restart with disabled modules
  • Help menu > restart with disabled modules

  Not all add-ons are disabled: Flash and other plugins still works

  After stops in Firefox, a small dialog box should appear. Click on 'Start mode safe' (not reset).

  Any difference?

• T-200 HP G60-white screen with the arrow of the mouse... Help! I tried a lot of things, but nothing works.

  Help! I was loading some CD last night in iTunes and let run all night. This am, I tried to wake up the PC again to a white screen with a mobile mouse arrow.  I sought the advice so far and found this informative link:

  http://support.HP.com/us-en/document/c03518165

  so I tried 3 of the 4 stages:

  Step 1: reset - MADE - always have a white screen with the mouse arrow.

  Step 2: Unfortunately, I don't have an external monitor

  Step 3: recovery of BIOS - DONE - always have a white screen with the mouse arrow.

  Step 4: reinstall the memory modules - DONE - always have a white screen with the mouse arrow.

  I restarted in Normal mode; In SafeMode... all with the same result = an empty space of the screen, a mobile mouse arrow... but I can't seem to Windows.

  Help, please.

  There are three main ways to restore your laptop to its 'Condition of the factory' - see the document on the corresponding link below.  There is a section to back up your personal files, see the section corresponding to your operating system including a video

  Performing a HP System Recovery - Windows 8

  Perform a recovery of the HP system - Windows 7.

  Perform a recovery of the HP - Windows Vista system.

  Perform a recovery of the HP - Windows XP system.

• Blue square icon with 2 White arrows attached to the photos transferred from the digital camera

  All uploaded photos from digital camera to the windows7 picture library have a blue square icon with 2 White arrows ">" attached to each picture in the lower left corner. How do I overcome this?

  All uploaded photos from digital camera to the windows7 picture library have a blue square icon with 2 White arrows ">" attached to each picture in the lower left corner. How do I overcome this?

  =========================================
  If you are running Norton 360... the following article is maybe worth a visit:

  Green checkmark or icon collection blue arrows displayed files in Windows
  Explorer:
  http://www.Winhelponline.com/blog/green-tick-or-blue-arrows-icon-overlay-displayed-for-files-in-Windows-Explorer/

  If you do not need the backup indicators feature you can turn off by
  by clicking settings in the main window of Norton 360, disable the backup
  Status indicators check box and click Close.
  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• My Avira Antivirus has been removed and the executable file Recovery Disc Creator

  Hello

  I want to create recovery DVDs, but I can't use Recovery Disc Creator because Avira deleted the executable file. How to do it?

  Thanks in advance

  I use Avira if a long time now and I've never experienced something like that. It's pretty bad situation now.

  Creator of recovery disk Toshiba cannot be downloaded and what you can do now is to reinstall the OS using the HARD drive recovery option, then when the laptop has once again factory settings, you will be able to start this tool and create the recovery disk.

  Out of curiosity, what model of laptop you have exactly?

• 2010 user.lib path to the executable file changed since 2009 (1abvi3w)

  Our group has often using VI server to control the other executables LabVIEW for automated tests. We expect the VI to be within the executable to control via Server executable VI screws and screws we need to construct the full path.

  For LabVIEW 2009 user.lib screw the path used to appear as:

  . exe\LabVIEW 2009\user.lib\...

  For LabVIEW 2010 user.lib screw (on Win XP AND Win 7) the path appears now as:

  . exe\1abvi3w\user.lib\...

  It's just information for developers. He really threw a key in our calls to the VI server and are uncertain as to why he's changed and why his "1abvi3w". Who's the funny guy?

  Seriously, why this change and why to use a '1' and '3 '. Is this an attempt of 1337 speak?

  Paths in applications applications are based on the hierarchy of the source of VI. For files in the directory of LabVIEW, the LabVIEW directory real name was used in 2009. It was ok except when creating relies on platforms or on multiple computers where LabVIEW has been installed to a different location. So for 2010, a single, constant directory name has been chosen.

• Cannot start web server on the executable file

  Hello

  We have a problem with a Web server - we cannot get to initialize the help of nodes of property or the ini on a compiled executable file.

  As part of our application, we are starting the Web server to publish a status page to be read remotely. This works very well when we are running in the development environment and also when we run an executable a PC with installed development environment, however it will not boot on a PC with just the runtime installed.

  I have attached some of the code that functionally does exactly the same thing in our main application. I used this as my Tester code and built in an exe while trying a lot of different things to fix.

  When executing:

  • The code will sit in the while loop until I press stop.
  • Web server: Active Server = FALSE
  • Out error = ERROR No.

  

  In the full application the while loop waits a few seconds before throw an error if the server is not started. In this example, I can let the loop running for awhile without leave. Normally, the boot time is<50ms when="">

  It's the ini file to the executable file:

  [WebTest]
  server.app.propertiesEnabled = True
  Server.OLE.Enabled = True
  server.tcp.serviceName = "My Server computer/VI"
  server.vi.propertiesEnabled = True
  WebServer.Enabled = True
  WebServer.TcpAccess = "' + * '"
  WebServer.ViAccess = "' + * '"
  DebugServerEnabled = False
  DebugServerWaitOnLaunch = False

  And it is the Web server configuration file:

  ErrorLog "$LVSERVER_ROOT/logs/error.log".
  LogLevel 3
  The default server name
  DocumentRoot "$LVSERVER_ROOT /... /.. '. "/ www".
  Listen 8000
  ThreadLimit 10
  TypesConfig "$LVSERVER_ROOT/mime.types»
  DirectoryIndex index.html
  LoadModulePath "$LVSERVER_ROOT/modules '" $LVSERVER_ROOT/LVModules "" $LVSERVER_ROOT /... ".
  LoadModule LVAuth lvauthmodule
  LoadModule LVSnapshot lvsnapshotmodule
  LoadModule LVRFP lvrfpmodule
  LoadModule dir libdirModule
  LoadModule copy libcopyModule

  AddHandler LVAuthHandler
  AddHandler LVSnapshotHandler .snap
  AddHandler LVRFPHandler

  AddHandler dirHandler
  AddHandler copyHandler

  "CustomLog"$LVSERVER_ROOT/logs/access.log"'%%u %t \"%r\ hour' % > s %b.
  KeepAlive on
  KeepAliveTimeout 60
  Timeout 60

  As can side note, anyone tell me where the $LVSERVER_ROOT variable is configured?

  I tried the things:

  • Copy a new default configuration file before the entry into force
  • Writing a predefined file (encoded) before initializing config
  • Definition to root before initializing directory (it actually generates an error because the server is not active...)
  • Set WebServer.Active = TRUE several times inside the while loop
  • Toggle the web server in the ini file

  System:

  • LabVIEW 2010
  • PC with Windows 7 running

  Thanks for any help, because it makes me crazy slow!

  Ben

  Hi Marco, thanks for the reply.

  I have this guide was reviewed previously and had done all that he but a small section who gave me a hint of something to try and I have solved my problem, so thank you!

  If anyone is interested, here's the problem:

  The directive DocumentRoot folder in the config must exist or the Web server cannot be started. So basically, make sure that the file points to a folder that exists!

  This leaves two small annoying problems if - you can't see if the file exists (and then create it) before starting the Web server, because you can not query the path to the folder without the Web server running.

  AND

  You can't really define the configuration programmatically file as parameters from the file are responsible for execution, not on the start Web server.

  The result of this is that the config file and the folder root document should be created (and corresponding of course...) when the executable is built / installed on the system. Not a massive headache, but it means do not forget to put things in the build specification and do not rely on software to do the job at startup

• Open the return of file &lt; not a refnum &gt; vi in the executable

  Hey there,

  I have a the ' Open/create/replace the file' vi in an executable file. It works perfectly fine on my development machine, so developing in the executable. When I install it on another machine, the - function returns true.

  It seems to me that the file opens correctly, even if it exists. There is no error, indicating that there has been a problem in opening the file, so I'm confused.

  None of you have met it... bug (?) and knows what it takes to to this topic?

  Thanks in advance

  

  Now I feel very stupid.

  It is in fact an error - file not found.

  I just thought that this (file not found) error message will show automatically if I have anything to remove the error messages, as a cluster of wiring error.

• How do you determine the VI file specification in executable?

  Under LabVIEW 2010, how can I determine a specification of file full of screws that he resides in a built executable file?  I have location of the executable file and I have the location of the screws on the drive when the executable was generated.  I hope that it has a property of LabVIEW that will tell me the specifications for each file in the executable.

  
  

• Exec System does not work in the executable file

  Once again I have to do something stupid!

  I use the Exec System to start/stop services. It works fine on my development machine, but on a stand-alone pc only Runtime installed with a license, he simply could not start/stop services!

  I did some research and found it we configure the executable file or an alternative is to use .net to achieve this goal. I couldn't stick with Exec System to achieve this?

  Thank you very much

  Waris K

  Sounds to me like a permission error - you are running as an administrator on the development computer, but as a less privileged user on the other computer? Exec system returns an error (try adding a simple error handler)?

• Y at - it an easy way to have a version number that the code VI has access to, and which is used as the version number for the executable file and the installer builds?

  Y at - it an easy way to have a version number that the code VI has access to, and which is used as the version number for the executable file and the installer builds? Now whenever I update my software I need to change the global variable where I store the version number, and then when I build I have in hand, open the properties and change the version number for the executable file and the installer. Is there an easy way to make these as all corresponding automatically?

  Have you tried a search? This question comes up a LOT. Here are the results of a search: http://forums.ni.com/t5/forums/searchpage/tab/message?location=Node%3A170&q=application+version#mess...

• Problem with the executable files

  Hello all, I need a help from you...

  I use LV 2009 SP1 Professional Development Suite on Windows Seven and I have a problem with the executable files, a problem that I have ever found with other versions of LV (8.x, for example) and I'm a little surprised...

  In the attachment you will find an example of what I mean.

  There are two base screws, the main one (prova) and a Subvi (provasubvi). The main vi launches the Subvi and the Subvi simply create a chart. As you can see on the screws works fine, without any kind of problem.

  I also created the exe file, without specifying that no particular option... and 'magic' of the application does not work as I want. In particular, it seems that the Subvi is running, but the front panel will not be accessible.

  I also try to play with the Subvi construction structure and options, but nothing change.

  Did you ever solve something like that?... I would say that I thank you in advance for any suggestion...

  Andrea

  Hello andrea,.

  Looking at your project I've heard that you do not include the Subvi during the build of the project. SO I slightly modified. Please find the attachments.

  Thank you and best regards,

  srikrishnaNF