White photos Lightroom

Similar Questions

• Satellite A110-195: black & white photo on TV with s-video connection

  When I connect to my laptop to TV with S-video cable, I get black white picture on TV. I tried to solve the problem with little things, but it is still black & white photo on TV. I have tried to change all settings to pal/ntsc under graphics properties, change the S-video cables, install a new graphics driver...

  Beside that I have desktop computer with S-video out and it works with the same cables and even TV (it's color).
  I noticed that this problem is very often, not just with my laptop with many many others...

  Can someone tell me what I should try to do?

  As far as I know the S-video port on television must be enabled. If you have the same problem with most of the other laptops it's obviously this problem is TV and not PC.

  Check the TV settings and make sure that the correct port is enabled.

• Black and white photos at the start of printing OK then turns reddish, changed the cartridges, same problem

  HP Photosmart C4600 all in one printer, HP, Windows7 desktop. When I try to print copies of old black & white photos, on premium Matt paper or any document (I tried all), with settings for grayscale or black and white, printing starts OK (black & white) and soon begins to print with a reddish tint. I changed the cartridge back & White 3 times with the HP cartridges and the problem persists. I cleaned my print heads, the problem persists, I tried various other parameters without result. Finally, I gave up and I went back to my old Epson 15 year for problem free Photo printing. How can this problem be fixed? Thank you!

  When you print graphics color cartridges are usually used to print even black and white.  In addition, when printing on the paper color photo is always used as the pigmented black ink cartridge is not compatible with the photo paper.

  It would seem that your color ink runs out.  See the troubleshooting steps described in this page.  Most likely, you need a fresh color cartridge.

• Black and white photos, impression in the purple form

  My wife has been copying some black & white family photos historical.  Six or more printed correctly, then a photo past black & white to one your purpleish to phase full of 90%, only the lower part had changed colors.  We loaded another cartridge printing black, believing that it was the cause, but to no avail.  Now all the photos to Black & white print in purple.

  Printing standard is fine.

  The copy is fine.

  The scan is fine.

  But photo printing results black & white photos in copies being 100% purple toned.

  Why?

  Printer HP 6510, only two months old.

  The printer uses color ink to print in black when printing on photo paper as the black pigmented ink is not compatible with the photo paper.  It seems that you have run out of yellow ink.  I would say the troubleshooting steps in the paper here to solve the problem.  Be sure to check the vents on the supply of yellow as the two solution.

• How to switch the color to black and white photos

  I can't understand how to use Paint in windows 7... what I try to do is to pass a color black and white photo, please help me by telling me step by step what to do.

  Windows live photos did that ability on its edition tab section, in its effects options.

  I would add that it is almost to easy :)

  Select the photo and right click on and select Edit, click the edit tab section and there are 5 different effects you can put the picture in, select close file when your finished, you can make a copy of the picture first of all you will have both files.

  Your best do in paintings because he has a record under work, something has no wlpg.

• Cannot change photo Lightroom 5 items 15

  When I try to edit a photo in Lightroom 5 items 14, I get the error opening photo lightroom 5 elements 14i getting the error cannot open files in the format "Tiff image.  Also true for the PSD format.  I was not able to find an answer to this problem on the forums, but I'm not the first with the problem.

  Check your game in LR Prefs. During your installation, make sure you select the application, and not an alias (shortcut). Also try to set 8 bit files, as features limited with 16-bit files. Go to this link for more information.

  PSE14 as an external editor

• Colorize black and white photo

  Hey guys! I desperately need help! I take a class of digital imaging right now and our duty is to add color to a black an white photo using selections. I am completely lost, I search for tutorials and I am still not sure how its done. Some please help?

  Hi, I made this speed colouring in 2007. It shows you how it works. If you have any questions, please let me know.
  Black and white to color - YouTube

• How to determine the real colors in a black and white photo?

  I don't know if I'm in the right section, but I wonder if it is possible to use an Adobe program to restore real colors in a black and white photo? I want to add color by imagining or guess; I need determine the real colors. This may not even be possible, but if this is the case, please tell me what I can use.

  Thank you.

  That's where the art comes into play when they colorize old movies.

  A lady wearing a pretty dress: is it greeen or purple?  It seems gray.

  A baby comes home from the new baby clothes cute hospital: pink or blue?  They have light gray air.

  It's a nice tie school the guys to wear: use the colors wrong on the bands, and it is in a different school.  But they are nothing more than various shades of gray.

  If there is one thing missing in a B & W photograph, every vestige of the color information.   All you have is gray.   You may need TO determine the real colors, but without a color photo to use as a reference image, you are out of luck.

• How to manage the photos Lightroom when using 2 computers, keeping any changes made on one or the other?

  Based on http://forums.Adobe.com/thread/1308132?TSTART=0 I decided to add each question separately:

  Hello, I am very interested in buying Lightroom 5.2. I tried the RC that was missing today. Yet, I have several questions that I can't find really good conclusive answers, I'd like to get an answer before buying LR. Please do not write maybe like this or that (assumptions), because I don't want to start my entire workflow and then realize that I have to change all around, please reply, if you know for sure that something works and you are, preferably, using this method too.

  Is the big question, where I want to especially a conclusive answer:  How to manage the photos Lightroom when using 2 computers, keeping all the changes made on one of them, using the same photos for editing. I'm not going to use DNG. Details: I mainly use my old MacBook Pro, but I wish I could use my PC as it is much better (card: i5 2500K, 16 GB of RAM, SSD, USB3, nVidia GTX 560 TI etc.). I have 2 external HD that I could use, one for backup and one for the actual Photos/changes. I you will probably need to use as my internal HDs are fairly complete and I cannot be the kind of things simply delete or move to one (developer, without loss of music, programs etc.).

  On this basis, how do I save all such Photos folder (pictures and retouching and preferably presets too)?

  According to me, that it should be possible to work cross-platform without having to create a link to the files each time, or without having to keep export/import of the catalog, keeping the single catalog and the picture library on an external drive that is then switched between systems as needed.

  Obvious first requirement is an external drive that is formatted in a way (for example, FAT32) that it can be used on both platforms in read/write mode. Given that, if the catalogue AND folder parent si le catalogue ET le dossier parent images are both set to the same level in a global parent folder, then it should be possible to take advatage of ability of Lightroom to use relative paths instead of absolute paths to detect the images, no matter if the player is named (Mac) or lettering (PC). This is how "export as catalog of ' works, that is, it creates a 'package', alias a parent folder, containing the catalog and a replica of the folder hierarchy to exported along with the catalog images. Take this 'package' to another system (same OS or not) and "it works" even if the drive letter is different or the operating system is different... because the relative path of the image catalogue is always the same.

  I have not tested this cross-platform (if I have between various PC systems with letters of different readers) so for me it's still just a theory, but there may be others who have done this successfully.

• How to make a black & white photo while keeping the subject of the photo in color?

  I'm new to PS photography

  I would like to know how I can make my scene in my black and white photo, while keeping the money reserve changes the color of the picture.

  any help much appreciated.

  Baba HT

  Hi Baba,

  Here are some step by step instructions that show you how to achieve this effect very easily thanks to the quick selection tool and a white adjustment layer to black & white.

  1. open your image in Photoshop. In the toolbar, click the Quick Selection tool and select your topic.

  

  2 go to Select > refine edge and use the dialog box to clean up your selection - I activated the option Smart Radius and increases the radius of the selection. When you are finished, click OK.

  

  3 go to Select > Inverse.

  

  4. locate the Control Panel settings - default, it must be located above the layers (in CS6) Panel, but if you don't, go to window > adjustments. Click the black & white setting icon, as shown below. Your subject will remain in color, but the parameter should turn black and white, as you can see below.

  

  For more information on the use of adjustment layers, here's a little video happening on the basics:

  If you have any other questions, feel free to post a reply!

  See you soon,.

  Kendall

• Prints horizonal lines through white photos

  Photosmart C4780 Print/Scan/Copy

  HP Everyday Photo Paper using

  When printing photos, it puts white horizonal lines through the pictures.  Looks like shit.  How can I fix it?  I ran the diagnostic doctor and he says that the printer works fine.

  Any help will be appreciated.

  Jean

  Hello JeanBurton.

  Please check this document.

  See you soon!

• in windows photo gallery, print color in black and white photos

  I just bought a hp printer c4640 all-in-one, and now when I print a color photo of the windows photo gallery, it prints in black and white. This printer is a desktop gadget to click and drag a photo to be printed, and if I do that it prints in color. I checked my settings of the printer, and I'm stuck.

  any help would be appreciated. Thank you!

  A

  Hello

  This happens usually if the print options or preferences are changed for your printer. To select print options, you must open the image you want to print. Most print options are located in the print dialog box, which you can access on the file menu in the program that you are using. The options that are available to you depend on the program and the printer you use.
   
  To access some options, you may need to click on the link 'Options' or 'Advanced Options' button or tab in the print dialog box. To learn more about the print options for a program, see the information for the program.
   
  Printing options are determined by your printer capabilities are called printing preferences and may include printing separation pages, color or image quality options and Staples. Like program options, printing preferences are displayed in the print dialog box. Look for the buttons labeled "Préférences" or "Properties". You can choose preferences each time you print a picture or preferences to default configuration to use for all the photos you send to a printer.
   
  Try these steps and check the result.
  Step 1: Set the default printing preferences.
  1. Click here to open Printers.
  2 right-click the printer you want to use, and then click Printing Preferences.
  3. Select the preferences you want to use as the default the next time you print to the printer, and then click OK.
   
  Step 2: Use print preview:
  To see what the print will look like before you print it, open the picture in Windows Photo Gallery that offers a preview before printing. Print preview is typically located on the file menu. You can choose the print in preview mode options and then print directly from the preview.
   
  To solve printer problems, download and run the Microsoft fix it and check the result.
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  I hope this helps.
   
  Kind regards
  Syed
  Answers from Microsoft supports the engineer.

• Director of Windows changed my color to black and white photos

  I just finished a project and instead of color, Director of windows changed all photos in black and white when I burn a CD.  What should I do to bring back the color that show thumbnails.

  I chose black and white accidentally in the Visual Effects tab

• Area calculation black and white photo

  Hello

  I am a beginner with Photoshop, and I would like to calculate the black box of a drawing.

  I'm looking after a tutorial for 2 weeks, but I found nothing.

  It is easy to calculate the area of the white background, but how can I do to the black outline?

  Underneath, it's the drawing that I want the black bounding box:

  

  Please, could you explain to me how do? With photos if it is possible.

  Thanks in advance,

  Nice day!

  The expanded view of the Panel histogram doesn't tell you how many pixels in a selection? (Window > histogram in the menu bar.) Then click on the button of the menu panel at the top right > view developed. Make sure together 'Source' to 'Selected sex' so that it is not aggregating all layers.)

  Then, you'll make a selection of, say, the magic wand tool, or a combination of the selection tools.

• When exporting photos, lightroom saves several versions of the image on my destination folder

  Hello

  I've been using lightroom for editing my pictures for about a year now.  First, I noticed the problem a few months ago, but did not bother to seek a solution so far.  Whenever I finish photo editing, I export it to my destination folder.  My problem is that when I go in the destination folder, I see several versions of the photo, even if I only export (save) once when I am fully satisfied with the modified final image.  For example, I'll see img_2222, img_2222-2, img_2222-3 and so on, sometimes up to 10 versions.  I also noticed that the images are a little different with the final image is the image with the largest number suffix (for example, img_2222-10).  I hope I am making sense here...

  As you can imagine, it's frustrating, because I end up spending an absurd amount of time to delete the versions that I don't need.  Is there any solution for this?  I searched all the settings and don't see even an option where I can record all the steps of my editing process images...

  Help!

  Hi cindymaya,

  Could you please share the version of Lightroom that you use?

  Could you please share the Lightroom export settings by using a screenshot?

  When you export an image, Lightroom displays the top progress bar left referring to the number of images that are exported.

  This progress bar says exporting a photo when exporting?

  suggest you try to export to a new empty folder, and then check if it exports several versions.

  Kind regards

  Claes