create the VISTA recovery disc

Similar Questions

• Satellite L - cannot create the Vista recovery disc

  Hello. I am trying to create the recovery disk. Takes 2 DVD, no problem with the 2, but when I am burning nr.1 and is about to finish showing me the error message:

  The following question has occurred during the recording of the data on the disk.
  The current process will be stopped.
  A power calibration area error.
  Please check if the disc is scratched dirty.
  If so, please try again with a new disc.
  (error code: 0E01B5-26-00037304)

  I tried 3 or 4 times, brand new DVD each time. Any ideas?

  Hi zombi71,

  What brand of DVD that you've already used? These burning questions can be linked to the mediums of poor quality so it s recommended using mediums high quality only. I have pretty good experience with Verbatim and TDK discs and especially with the DVD-R DVD + R. So I would recommend Verbatim DVD-R. With this brand, it was possible to create the mediums of recovery on my laptop. :)

  Check this box!

• cannot restore the system with the Vista recovery disc, computer stuck in step 3 of 3 loop

  Hi all

  My computer has been blocked in the formidable step 3 of 3 loop. I followed the advice of Mr. Murphy and created the Vista recovery disk. I loaded it and followed the instructions. Everything was fine. I chose a 5 days ago restore point, and it went well until he must "finalize the restoration of files...". ». That's where he stayed - it would not be completed. I tried the restore points different, all with the same result. Any help would be greatly appreciated.

  Try to make with her startup repair.

  With this CD, you can also do a startup repair of your Vista OS with it.

  If she can't do a startup repair and system restore has failed, it is time to consider doing a re-install of the Vista operating system.

  See you soon.

  Mick Murphy - Microsoft partner

• Problem with the Vista recovery disc

  I downloaded the neosmart Vista recovery disk.  I also downloaded the iso burner to create a bootable disk.  The first time, I used a DVD to make the bootable disc.  I then went to defective laptop (my dads - will not go beyond the page that is displayed when you stop suddenly).  I went into Setup to make searching the disk first to start.  I inserted the disc and everything works well, but only for the first, a short walk.  It tell me that windows loads the files and I see the bar moving across the screen.  Then I get the screen you see green bars that cross as if its about to start.  Next, I get a screen with a great slider and a small box saying error of Setup.exe.  If I do nothing, nothing happens, if I click OK it starts the whole process.  I decided to try everything from scratch and delete my copy of vista from torrent and re downloaded recovery disk.  I then burned on a CD using the standard iso-burner and exactly same problem again.

  I'm going wrong somewhere or is the computer of my father beyond saving?

  I got Dell fixed in my mind, for some reason any!

  Here is the link to the Forums in XP.

  XP forums:

  http://social.answers.Microsoft.com/forums/en-us/category/WindowsXP

  Link above is for XP Forums.

  There is a list of the different Forums XP to the link above to help you.

  You get the help you need there.

  See you soon

  Mick Murphy - Microsoft partner

• Satellite Pro L40 - where to get the Vista recovery disc?

  I lost my business vista recovery cd rom by wrong cd rom is broken.
  hope someone can help me,

  Hi sherin2222,

  That's no problem because you can order a new Toshiba recovery disc directly but I m not 100% sure if it is possible for the older by Satellite Pro L40. Just check out the recovery shop:
  https://backupmedia.Toshiba.EU/landing.aspx

  If you can t find, ask the ASP in your country. Guys can order such a disc.

• Where can I get the Vista recovery disc - Satellite P205D-S8802

  Hey guys,.

  Last year, I bought my Toshiba Satellite P205D-S8802
  I got no CD Recorvy, but if I want to do the training, the HARD disk I need the disk
  Where can I get the disc?
  I have the original Windows Vista Home premium (the button on the laptop is a Microsoft label)

  Thank you for the help

  Hello

  To me, it seems that Satellite P205D-S8802 is a series of portable US.
  You should be able to order the recovery of the ASP disk in your country.
  Otherwise, you need an original Vista from Microsoft and the pilots could be downloaded from the American pilot site.
  But note; You may not use the Vista serial number which is placed at the bottom.
  It belongs to the preinstalled Vista and it s version just an OEM

• How to create the default recovery disc factory with OneKey Recovery 4.0

  I have a K430 and before I use it (as with any machine, I bought) I wanted to make my recovery disks.

  Throughout this site there are guides to do this with version 7, but this desktop computer has version 4.0 of OKR

  I can record an image of my partition system but need the ability to install on a clean hard disk in case of hard drive failure.

  I have checked the forums and Kb and been through programs of Windows 8, but nothing shows me the right way.

  This is compounded by the fact that none of my imaging tools drive as the drive Seagate, which was delivered in this machine (Ghost4Linux, CloneZilla, Acronis Migrate Easy)

  Where is my option create said support?

  Just to close this one.

  I talked to the customer on the phone this post having remained unanswered,

  There is no recovery disc to buy or to create for this machine, should so hard drive failure you need to source your own discs.

  This machine will be returned now, a lost for the sake of a DVD sale.

  I must say the guy who talked on the phone was really helpful and courteous, unfortunately hampered by the policy of the company.

• My office is says I need to insert the vista recovery disc but I can't

  I have recently moved and have lost much of his property, however only one I need right now is windows vista disks. my computer came one morning and wouldn't start, now say that I need to use the recovery disc. What can I do without it? I have the sticker windows on the desktop... can I do? Please... I need to use the desktop computer as soon as it is such an inconvenience

  Hello

  read this:

  Ways to reinstall Vista

  Contact the manufacturer of the laptop computer and ask them to send you to vista recovery disks to reinstall the operating system back as it was when you bought it

  they do it for a nominal cost of $

  also ask them if you have a recovery partition on your hard drive to get back to the way you bought

  you would normally press F8, F9, F10 or F11 or Alt + F10 or 0 to start to start the recovery process according to the manufacturer

  Ask them of the exact key sequence

  or borrow a vista microsoft dvd; not a HP, Acer recovery disk etc

  Make sure that you borrow the correct 32-bit or 64-bit microsoft dvd to your computer

  they contain all versions of vista

  This is the product key that determines which version of vista is installed

  http://www.theeldergeek.com/Vista/vista_clean_installation.html

  How to replace Microsoft software or hardware, order service packs and replace product manuals

  http://support.Microsoft.com/kb/326246

• How can I get the Vista recovery disc

  My hard drive is dead and I need to acquire a set of Vista recovery disks. for a laptop entertainment Pavilion dv6226us PC

  Where canI get thos article?

  Hello

  Although they are not available from HP, you can always buy them from the dealer of 3rd party on the following link.

  http://www.computersurgeons.com/ProductDetails.aspx?ID=3162

  Kind regards

  DP - K

• How to make the Vista recovery disc

  Hello world

  I hope someone can help.  I ordered a disk recovery recovery Vista - Disk.com, until I knew I could do this in HP.  They sent me two discs, a disc labeled 1 and the other 2 drive. There is no install disk, only the files feature. This is what disc 1 looks like.

  file mgr boo. Mgr

  SOURCES folder

  the file folder preloads

  HP-folder

  Folder of BOOT files

  Does this mean anything to anyone.  When I try to open is going to the web to find something to open with.   Help, please

  "jshort1980" wrote in message News: f81ac371-e0dd-480C-b5da-6df8a2b62374...

  Hello world

  I hope someone can help.  I ordered a disk recovery recovery Vista - Disk.com, until I knew I could do this in HP.  They sent me two discs, a disc labeled 1 and the other 2 drive. There is no install disk, only the files feature. This is what disc 1 looks like.

  file mgr boo. Mgr

  SOURCES folder

  the file folder preloads

  HP-folder

  Folder of BOOT files

  Does this mean anything to anyone.  When I try to open is going to the web to find something to open with.   Help, please

  The disc is bootable - simply insert the disc 1 in the bin and restart the machine - you should have an option to boot from the CD (if not, read your manual for instructions) - recovery then reformat the hard drive and continue the installation.
  MAKE SURE THAT YOUR DATA IS BACKED UP FIRST! -to external media.
   
  
  --

  Noel Paton | Nil Carborundum Illegitemi | CrashFixPC | The lazy three fingers

• How to create a bootable recovery discs recovery partition?

  OK, I found a few old recovery disc for Windows Vista professional for Compaq 6720 s.

  Now I have 2 questions:
  (1) how to create these recovery discs recovery partition?
  (2) my version of the partition is Vista. I've updated to Windows 7. How do the Vista recovery partition 7?
  Thanks for your help and your time! I appreciate it...

  Any recovery partition is created by the PC manufacturer and nothing to do with MS

  No win version, upgrade or install clean, has already created a recovery partition

• Nothing is happening with the product recovery disc

  I dropped my laptop yesterday and now it will not load Windows. I tried 'Start-up launch repair' it says Windows is loading files, comes up with the screen of Microsoft Corporation, then will just a black screen. I put in my product (Windows Vista) recovery disc but nothing don't be going on I also pressed F12 and some CD/DVD, but still nothing!

  Would appreciate any help

  Thanks in advance

  Hi nhannan,

  What model of laptop you have exactly?
  Have you tried to boot from another drive? Perhaps the recovery disk is scratched and t can be read more.

  You should also check if the CD/DVD drive is properly recognized in Device Manager and try to load the BIOS default settings may be it helps ;)

• Satellite Pro A200 - where to get the new recovery disc?

  On Thursday of last week ended with the blue page of death, tried to use the product recovery disc and found to my horror, it has a large crack in it.
  Can someone tell me is that I can download a new disc of?

  Have managed to cost to get the laptop to the top and running but Windows vista had to install windows 7 Originaly the laptop came with windows XP. Any advice greatly appreciated.

  You can get [Recovery disk | https://backupmedia.toshiba.eu/landing.aspx] Toshiba

• Satellite A200: Where to get the Vista recovery CD

  I boght the laptop and it came with Windows Vista professional.
  But it got a Virus. Thanks to the Norton which came with it and I had to do a system restore.

  And the reovery disc came with XP. I have the key for Vista on the bottom of my laptop but I don't know how to get another copy of Vista professional for the A200 to use...

  Can someone help with that...

  Very strange that s why you received the Toshiba XP CD recovery and not the Vista recovery CD?  :|

  Generally, if the laptop has been pre-installed with Vista then you should get the recovery CD Toshiba with Vista OS.

  In case you I would contact the ASP in your country to get the Vista recovery CD

• Satellite A210 - 4 1: Winload.exe problem after having used the product recovery disc

  Hello

  I could really do with some help here. I have a PC laptop Toshiba Satellite A210 - 1 4. Disk partitioned with Vista home premium service pack 4.0.

  Last night, I used the product recovery disc supllied with the laptop in an attempt to restore its initial configuration.

  and the end of the procedure, I find myself with a prompt cmd with X:\windows\system32\cmd.exe in the high bit blue box indicating:

  Error: imageX could not apply vista F:\05993xsp.swm Index 2 of ODD to C:\!

  Press a key to continue. Box disappears then an administrator: X:\windows\system32\cmd.exe in the top blue bit indicating:

  waiting for ODD vacancies...
  STRANGE drive f: loan.
  Look for support in the F: drive...
  Failed to initialize the raid class.
  No RAID - continue normally...

  X:\Windows\System32 >

  Now every time the laptop trying to restart it just comes up with the error message:

  CANNOT START WINDOWS. A RECENT HARDWARE CHANGE OR SOFTWARE MAY BE THE
  CAUSE
  FILE: \WINDOWS\SYSTEM32\WINLOAD. EXE
  STATUS: 0XC000000E
  INFO: THE SELECTED ENTRY COULD NOT BE LOADED BECAUSE THE APPLICATION
  IS MISSING OR DAMAGED

  Below I have then have the possibility of esc or continue with the same result of the system attempts to restart.

  The recovery disc has no option of repair on this subject.

  need help please, I have no idea.

  Thank you

  Hello

  Looks like something was wrong during the recovery procedure.
  Have you tried to recover the laptop once more?
  If this isn't the case, you should definitely try this!

  You are right; hasn t drive recovery option for the repair because the recovery disk is not the same as a MS Vista drive. The recovery disk contains image files (it s a package) and the files contains Vista, Toshiba drivers, tools and additional software.

  So if something was happening well wrung out during the recovery procedure, you will not be able to repair the installation of the OS, but you need to run it again.