who press on print a page

Similar Questions

• PIXMA MG5320 print white pages

  Hello! I have a 3 years, Canon Pixma MG5320, who has started printing blank pages in recent weeks. I don't think that it is no longer under warranty. I changed all four cartridges, did several cleanings and deep cleanings (using about 2/3 of the ink). The nozzle head and print head alignment results are:

  

  Red and blue prints for the head nozzle test and only blue prints for the alignment of the heads. Is there a way I could directly inspect the nozzle head? It is perhaps also an alignment problem? There was another post with a similar problem. Should I just call tech support? Any help would be greatly appreciated, thanks in advance!

  Hello.

  If some colors are missing after cleanups were conducted, troubleshooting with our support group is needed to narrow down the cause of your problem. Please contact our support group using the link 'Contact us' below for further assistance.

  It has not responded to your question or problem? Find more help contact us.

• Press OK to print a page

  I use third-party print cartridges in my HP Office Jet 6500 has. If I have a document with several pages to print, I have to press 'OK' before each page is printed. Is there a way to avoid this. I often print large documents and unless this problem can be solved, I'll have to buy a printer from another manufacturer.

  All solutions? Suggestions?

  Hello

  This problem occurs when you use HP ink cartridges?

• Is it possible to create a link "print this Page"?

  I have a client who want to insert a print this page link that launches their print utility. Is this possible with the Muse?

  This is not a function of Muse. You will need to use the "insert HTML" function to add this.

  Here's where to find the javascript to insert code.

  Beware that Muse only produces a generic stylesheet and does not define the specific media type. This means that the printing a web page generated by Muse or the rendering of a Web of Muse site on a mobile device can be extremely messy.  Items may fall on a page or can be oddly sized. The showcase of Muse shows how Horace and Lydia site collapses in the press. Items appear blank and broken pages result.

  

  Muse of developers need to use semantic markup so that users can design the style sheets for different media types. This topic is related to frequent queries that Muse should be able to design for mobile devices. Muse is not smart enough to make anyone a professional designer.

• When I try to print a page, I get the entire page of very low, either I get only part of the page. Which setting I'm missing?

  I am trying to print a page of a web page. If I check, 'reduced to fit' print / page setup, I get the whole page but small enough to be useless. If I uncheck 'reduced to adjust', I get only about 1/3 of the page. I tried the % function, and it only changes the size of the narrow portion I see already. How to print the whole page in a reasonable size?

  If Firefox does not use the entire sheet of paper, it can result from Firefox after having extracted the Windows incorrect paper size settings when reading data from the print driver. Compensation it may involve conclusions some mask parameters, but here goes:

  (1) in a new tab, type or paste Subject: config in the address bar and press ENTER. Click on the button promising to be careful.

  (2) in the search above the list box, type or paste print and make a pause so that the list is filtered

  (3) for each parameter which specifically mentions the problem printer, right click and reset The fastest way is to click with the mouse and press the r key on the keyboard with your other hand.

  Note: In a few discussions involving Brother printers, printer_printer_name.print_paper_data preference was established in 256 and when the user changed it to 1 which, in itself, solve the paper size. If you are using a Brother printer and see a 256 here, you can change the value by double-clicking it or by using the right click > modify.

  Any improvement?

• 6500 accepts the print job, but prints blank pages - even in copy mode

  6500 accepts the print job, but prints blank pages - even for copies. Printer ink is full.

  WOW! At least temporarily, my solution is press Setup (the key) right arrow to TOOLS #6 tab. type OK.
  Tab (# 2) clean the print head. Hit OK. If all goes well, take a step back, let the process and be surprised. A second test may be necessary.
  It works at least for a day. Maybe it's your solution.  Jesus is our only hope!

• PSC 1510 guard printing alignment pages, won't allow me to use scanner

  My 1510 keeps printing alignment pages (or gives me an error of paper output).  I do not use the color cartridge and haven't for a long time.

  Now when I try to scan a document it says that something is in control of the scanner (probably the alignment process).   I put the fininsh the alignment process page, but he just keeps trying to print an alignment page.

  How can I disable alignment 'characteristic '?  I'm starting to think that the only purpose of this feature is wasting ink HP.

  Hello

  The alignment process designed to ensure optimal print quality, black ink and color are necessary to complete the alignment process, otherwise it runs aground.

  I'm afraid that the model does not circumvent the alignment process, thus getting a new color cartridge essencial in order to complete the alignment process, otherwise the printer will keep pritnign the sheet at the start of the device.

  You can try to print an alignment sheet and press several times the button cancel during the pritning of the page, I think that it can cancel the process then and allow you to scan, however the same will have to be repeated after the printer is restarted.

  Shlomi

• and installed this (I think). Printer seemed to work. Now say "impossible filter. sometimes footprints of Safari, but no word. Sometimes, it prints a page when I turn printer on and outside. It's crazy to do. Thank you.

  I have a MacBook Air. I use OS x El Capitan V10.11.12. 3 days ago, I installed a printer Epson L355. Everything seemed fine, when I first printed a few pages. I installed the driver delivered with printer and followed the Mac set up. The process has not completely finished the whole upward. I then found a Mac driver Mac page and installed (I think - how will I know?) and it seemed ok. When I used it the next day I kept getting message "filter failed" when you try to print from wifi. There is a strong wifi signal and scanning is ok. I can sometimes print a page of safari, but not from Word. I tried to delete and add printer's done everything to nothing. get him looking for a printer then message "filter has failed", with the printer in the "inactive"

  Can someone help me please? I'm getting worried and frustrated in equal measure. I'm not a techie and really evil.

  The message failed filter keeps the driver having problems of compatibility with the operating system and not the network connection to the printer. You mentioned with the driver supplied with your printer. This is linked from a previous version of Mac OS X, because sellers do not tend to get the latest drivers on the CD supplied with the printer. And then you install another driver, you can have caused even more conflict. So I would recommend that you delete the printer Printers & Scanners and then using the Finder, select go > go to folder, and then type/Library/Printers/Epson and press the Go button. This will take you to the Epson folder that has all the files in the printer driver. Select all the files and then trash them. Then, restart your Mac and when you are logged in, go to the Epson website and find the L355 printer driver that supports OS X 10.11. Download and install this driver, and then add the printer via Printers & Scanners again. Then see if you can print.

• Pavilion a6312p: Photosmart 7510 prints blank page

  I have a HP Photosmart 7510, who served me well for over a year until what I tried to use it today.  I tried to print a letter in Microsoft Word 2010, and the printer produces a blank page.  The ink levels are good, in fact, I have a brand new black and photo black installed this week.  I tried to print a test page and nothing printed except the logo of Microsoft of color and words, printer Windows-Page of Test, the text is so light that I could barely read.  I have cleaned the printheads twice, and represented the test page with the same result.  I don't know what else to do.  The HP Scan and print doctor said all control very well.

  I used the printer every day since the installation of the new black cartridges and it was working fine until today, so I know this isn't the issue.  I hope there, can someone give me an overview of this issue.

  Hi bankercop,

  I see that you have a hard time getting black ink for printing with the Photosmart 7510, I would like to offer a suggestion. Have you tried cleaning the print head manually?

  Accumulation of ink can lead to this problem and the own automatic does not built / dried ink in the head.

  Although this guide: 'Is missing or does not have the print head' or "Print head is not detected, missing or not installed correctly" appears for HP Photosmart e-all-in-one 7510 Printer series, addresses, a print head missing, the cleaning steps are the same.

  I hope this helps you. See you soon!

• HP cp1518ni: print a page then error message - paper jam

  Hello

  Hoping someone can help please:

  I tried to print a 10 page document and my HP Laserjet Cp1518Ni prints one page at a time, each time with a message "paper jam tray 2, clear Jam then press OK". I have remove the tray and there is sometimes a piece of paper that has begun to pick up and sometimes not at all jammed paper. Once the tray is replaced then initializes it before printing a page more.

  Is there something I can do to remedy to this please?

  Thank you, Shaz.

  Problem on this model.  The drive tray 2 roller is probably worn out and must be replaced. Just do a search on google for the maintenance manual as instructions are in the manual. Rollers can be purchased online:

  http://www.feedroller.com/store/index.php?cPath=1_17_87_2547_3280

• How do I configure to print last page first on a 5531

  I have a new 533 hp printer and I can't find the settings to print last page first when you print multiple pages, can anyone help?

  Hello tsmith777 & Jman1972,.

  In fact, I went and installed the printer myself on a computer that is running Windows 7, and you're right, that option is not listed.

  I was able to install another pilot who was in fact the option.

  Here are the steps on how to install another driver:

  1. Make sure that the USB cable is not connected to the product. If the USB cable is connected to the product, unplug it.

  2. In the Windows taskbar, click the Windows icon ( ), and then click devices and printers.

  3. Click Add a printer. The Add Printer window.

  4. Click Add a local printer.

  5. Click use an existing port.

  6. Click the drop-down list use an existing port , select LPT1: (Printer Port), and then click Next.

  7. Under manufacturer , in the installation of the printer driver window, click HP .

  8. Under Printers, select the appropriate driver to spare for the product (Deskjet 990c), and then click Next.

     NOTE: The other pilot of HP of your product might not be currently installed on your computer, but it is available via Windows Update. Click the Windows Update button to select additional printer drivers. Select the driver replacement for your product and then click Next. You must connect to the Internet before using Windows Update.

  9. In the printer name text box, type the name of the product, and then click Next. The printer driver starts the installation process.

     NOTE: The substitute driver name appears in the window as the default name. If you prefer, you can change the name of your product. This step is optional.

     Once installation is complete, a message appears on the computer indicating that the product has been successfully added.

  10. In the message window, click done.

  11. Plug the USB cable into the product and connect the USB cable to the computer. An software device driver is not properly installed window opens.

  12. Click close ( ) to close the window.

  ------------------------------------------------

  Since the Deskjet 990c driver is installed, follow these steps to configure the installed driver.

  1. In the devices and printers window, right-click the name of the product and then click on printer properties. The printer properties window opens.

  2. Click the Ports tab.

  3. Click the menu drop down and then replace the LPT1 to USB or DOT4port.

     NOTE: If there is more than one available USB/DOT4 port, select the USB/DOT4 port with the largest number of port. To see the full port name, expand the line of ports in the Properties dialog box by placing the cursor on the vertical line between the Port and the Description, then click and hold down the mouse button. Move the mouse to the right until the name of the port is visible.

  4. Click OK.

  Let me know if it works for you!

  Thank you

• Prints a page not sent every minute

  Have an officejet pro 8600 N911a, set everything up, but it keeps printing a page with just an H on it every minute. When I search the event log it just says: event 72234 printer. Help!

  Hey mfshuler,

  I see that you are having a sporadic problem with your Officejet Pro 8600 (N911a) print jobs.  How do you have the printer connected to your computer (ethernet, USB or wireless)?

  What is the operating system of the computer, the printer is connected to?

  If the printer is network connected, when was the last time that all devices in the circuit by bicycle you can?

  Follow these steps to reset your printer HP, your router and your computer.

  1. To turn it off, press the power button on the HP printer.
  2. Unplug the power cord at the back of the HP printer.
  3. Unplug the power cord from the wireless router.
  4. Turn off the computer.
  5. Wait 30 seconds.
  6. Reconnect the power cable to the wireless router.
  7. Wait 30 seconds, or until the router is completely ready.
  8. Turn the computer on.
  9. Wait for the computer to recharge.
  10. Reconnect the power cord to the back of the HP printer.
  11. Turn on the printer.

  So, have you tried running printing HP and doctor Scan?  This may solve the problems with the background print spooler.  To access the HP PSDR click here.

  Let me know if this can help,

  Jason

• When I take a screenshot by pressing the print SCREEN key on my keyboard, I can't get a screen shot in small size, in a Word document.

  Original title: screen printing.

  Hi supperman.

  I have a problem with the screen capture. When I take a screenshot by pressing the print SCREEN key on my keyboard, I can't get a screen shot in small size, in a Word document.

  someone knows the reason for this? How can I get a screenshot in a normal size. Thank you very much.

  Hi tony.wang,

  If you copy the screenshot in a Word file, it will be the default page of the word file size. It will be in a smaller size to fit into the Word file.

  However, if you want to open the full-size screen capture, you can use Microsoft Paint on Windows application.

  
  Reference: Overview of Microsoft Paint

  Hope the helps of information.
  Please post back and we do know.

• DeskJet 2540: deskjet 2540 - how to stop the printing of 'print quality page' feature is implemented.

  New printer that is connected to the desktop Linux [Ubuntu 14.10] cable and everything works fine. But when switched on it automatically prints a "print quality page. I read the online help to prevent what gives think I scans the document and pressing / or two scan buttons to stop cela automatic printing, but nothing helped. Is there a proper procedure available somewhere to guide the user through all that is needed to stop this waste of paper and ink?

  I had already tried these solutions suggested, but even after power off / on a couple of times, nothing had changed. Mystically then when I turned on for use a few days more late the test print had been removed - weird or what?

• ENVY 5530: Print scanned pages is so slow!

  Hello world!

  My name is Flavio.

  I just bought an inkjet Envy 5530 and I really like it so far. But what happens is when I try to print pages that have been previously analysed and have some sort of texture in white (not pure white), printing is so slow, perhaps, it prints a half inch at a time, stops for 4 or 5 seconds and then print one more inch... it takes about 3 minutes to print one page...

  Is this supposed to happen with the inkjet printers?

  I know that with lasers, of course it is much faster, but I didn't know that the printers ink jet could be so slow!

  I think it has something to do with the White is not not totally white.

  Any help?

  Thank you!

  Hi @flaviolira123 ,

  Who would certainly slow printing down. The printer would take time put in detail in print.

  If it happened to other types of documents, I'd be a little worried.

  Have you tried printing in draft mode?

  Have you tried only shades of gray, black ink mode?