Whole problem of Parsing

Similar Questions

• Problem in parsing Json

  I have a problem with parsing Json. While participating in the 1st time I would log on to the Console as

  "Jsonva length 21".
  JSON length 0 "

  After 2 or 3 attempts, I would log in the form

  "Jsonva length 21".
  JSON length 14 "

  Here I use to code analysis.

  BB::data :: JsonDataAccess ja;
  const QVariant jsonva = ja.loadFromBuffer (response);
  QList const externalip = jsonva.toList ();

  std::cout< "jsonva="" length1="" "="">< jsonva.size=""><>
  std::cout< "json="" length1="" "="">< externalip.size()=""><>

  Pls advice me what is the problem in my code.

  Sorry that was my problem. I have error in functionality.

  Thanks dude.

• Problem with parsing XML with html as part of the node content

  Hi all

  I am facing problem with XML parsin when the node has a HTML content, if the node does not have any html content then it works fine. Similar analysis logic works for Java Standard, but not for the Blackberry API. I have an obligation to remove not HTML content prior to analysis. As that would display in the browser.

                            String xml="" +
                  "<p> Dummy content </p> " +
                  "" +
                  "";
                            DocumentBuilderFactory dbFactory = DocumentBuilderFactory.newInstance();
              DocumentBuilder dBuilder;
              Document doc;
              bis = new ByteArrayInputStream(xml.getBytes("UTF-8")); 
  
              dBuilder = dbFactory.newDocumentBuilder();
  
              doc = dBuilder.parse(bis);
              doc.getDocumentElement().normalize();
  
              NodeList nList = doc.getElementsByTagName("disclaimer");
  
              Element activeTagElmnt = (Element) nList.item(0);
              NodeList activeTag = activeTagElmnt.getChildNodes(); 
  
              tagValue=((Node) activeTag.item(0)).getNodeValue();
                            System.out.println(tagValue); //This prints "<" with HTML content. If i remove HTML then "Dummy Content" is printed
  

  If I need to remove html content, then I would need to reformat the content according to the HTML as the newline to a linebreak.

  Any suggestions would be helpful.

  Thank you

  Sandeep

  I feel xml parser was mature enough to handle these characters if sills, you get the error explore CDATA. It might help you.

• Problem of Parsing XML

  Hi all

  I have a XML Data...

  As

  I want to get the name of node and its values...

  But I'm not able to analyze and get access those.

  I tried using DOM parser.

  Everyone please help.

  Thanks and greetings

  Stephenson

  Similar to what manojkbaghela wrote:

  DocumentBuilderFactory docFact = DocumentBuilderFactory.newInstance ();
  DocumentBuilder docBuilder = docFact.newDocumentBuilder ();

  Doc document = docBuilder.parse ({inputSource file});
  doc.getDocumentElement () .normalize ();
  NodeList listOfRecords = doc.getElementsByTagName ("node");
  int totalElements = listOfRecords.getLength ();

  for (int s = 0; s< totalelements;="" s++)="">

  Element myElement = listOfRecords.item (s) (element);

  LinkID = myElement.getAttribute ("LinkID") string;
  String subject = myElement.getAttribute ("Topic");
  Position of the string = myElement.getAttribute ("heading");

  }

• Problem when parsing

  Hello

  I have aquery in analysis.

  In xml, if I get the response as:

  Then I will analyse

  Document document = new Document();
  XmlParser xmlParser is new XmlParser (new InputStreamReader (is));.
  document. Parse (xmlParser);
  Element rootElement = document.getRootElement ();
  int child_count = rootElement.getChildCount ();
  for (int i = 0; i)<>
  {
  Element = rootElement.getElement (i);
  if(element!=null)
  {

  If (element. GetName () .equalsIgnoreCase ("Name1"))

  {

  String name1 = element.getText ();

  }                   }

  Now, if I get the answer, something like this:

  So how to parse this?

  Found the solution

• Problem in parsing XML

  Hello

  Any1 can you please tell me how to do Xml parsing in Blackberry. I'm a bit confused by it.

  Assume that it is my link:

  {keyword: "keword", url: "videoUrl"}

  While parsing xml:

  String keyword1 ="";

  element.getName.equalsIgnoreCase ("keyword");

  keyword1 = Element.GetText ();

  is she writing?

  Hey its done.

• problem in parsing xml with validation

  Hello

  I use webservice and xml parsing allows to get data from it, he worked successfully when I put data valid that webservice are made up.

  But now, I want that if I put some data not valid in URLs for validation purposes.

  When I put the wrong data, it shows me exception. So, how I can handle it when the user put data not valid.

  Please help me .it's urgent.

  Thanks for the reply,

  I solved it myself.

• having a problem with parsing the XML file

  Hi all
  I am trying to get data from XML file
  I want to only 4-5 values in this XML file
  Here is an example of XML file
  

  -< transaction >
  -< TransCtx >

  > < pAMETranType > IRCVACAPPROVAL < / pAMETranType >
  > < / TransCtx >
  > < / transaction >
  
  I want to add value and to store this value in table
  I'm here, I want to "IRCVACAPPROVAL".
  the tag
  < pAMETranType >
  
  for this purpose
  
  
  I created a procedure
  
  

  CREATE OR REPLACE PROCEDURE insert_xml_emps (p_directory in varchar2,

  > p_filename in varchar2)
  (> vtableName in varchar2) as
  > v_filelocator BFILE.
  > v_cloblocator CLOB.
  > l_ctx DBMS_XMLSTORE. CTXTYPE;
  > l_rows NUMBER;
  > v_amount_to_load NUMBER;
  > dest_offset NUMBER: = 1;
  > offset NUMBER: = 1;
  > lang_context NUMBER: = DBMS_LOB. DEFAULT_LANG_CTX;
  > WARNING NUMBER;
  > START
  > dbms_lob.createtemporary (v_cloblocator, true);
  > v_filelocator: = bfilename (p_directory, p_filename);
  > dbms_lob.open (v_filelocator, dbms_lob.file_readonly);
  > v_amount_to_load: = DBMS_LOB.getlength (v_filelocator);
  >-* this line is changed * -.
  > DBMS_LOB. LOADCLOBFROMFILE (v_cloblocator,
  > v_filelocator.
  > v_amount_to_load.
  > dest_offset.
  > offset.
  > 0,
  > lang_context.
  (> warning);
  >
  > l_ctx: = DBMS_XMLSTORE.newContext (vTableName);
  > DBMS_XMLSTORE.setRowTag (l_ctx, 'TRANSACTION');
  > DBMS_XMLSTORE.setRowTag (l_ctx, 'TRANSCTX');
  >-clear the update settings
  > DBMS_XMLStore.clearUpdateColumnList (l_ctx);
  >-set the columns to update a list of values
  > DBMS_XMLStore.setUpdateColumn (l_ctx, 'PAMETRANTYPE');
  >
  >-now insert the doc.
  > l_rows: = DBMS_XMLSTORE.insertxml (l_ctx, v_cloblocator);
  > DBMS_XMLSTORE.closeContext (l_ctx);
  > dbms_output.put_line(l_rows ||) "... inserted rows. ») ;
  > dbms_lob.close (v_filelocator);
  > DBMS_LOB. FREETEMPORARY (v_cloblocator);
  > END;
  
  I also have on the table who get this value
  
  whenever I call that created the procedure
  it sometime gives an error or sometime run correctly but store null in the table
  
  
  But when I change the XML file
  as
  When convert all lowercase letters in the capital then it works fine
  
  Is tehre to other ways to parse the XML file with no change in the XML file?

  Did you use the same test (with the exception of file name and directory) case?

  What I posted is a copy/paste direct SQL * Plus, and it works on version 11.2.0.1.

• pls help... problem of parsing and XML datagrid... :(

  I'm building a small application using flex, php and mysqli...

  I'm trying to connect a DataGrid to a php... php analyzes an xml data for the flex... but when I run the program datagrid doesn't get filled... someone can help me... r my code snippets here...

  the name of the database of crm, the table name is led...

  the column names are, respectively, company, fname, and lname...

  <? PHP
  
  echo "<? XML version=\"1.0\" encoding =------"utf - 8\ '? > ';
  
  $conn = mysqli_connect ('localhost', 'root', ", 'crm');
  
  $query = "SELECT * from conduit."
  
  $result = mysqli_query ($conn, $query);
  
  echo '< leadsxml > ';
  
  While ($Row = mysqli_fetch_object ($result))
  {
  echo "< channel > < leadCompany >. $row-> the company. "< / leadCompany > < leadFirstName >. $row-> fname. "< / leadFirstName > < leadLastName >. $row-> lname. "< / leadLastName > < / leads >";
  }
  
  echo "< / leadsxml > ';
  
  mysqli_close ($conn);
  
  ? >

  and the flex part

  <? XML version = "1.0" encoding = "utf-8"? >
  " < = xmlns:mx mx:HBox ' http://www.Adobe.com/2006/MXML " >
  
  < mx:HTTPService url = "getlead.php" id = "getleadHS" showBusyCursor = "true" useProxy = "false" method = "POST" / >
  
  < mx:DataGrid id = "leadDataGrid" width = "400" height = "240" dataProvider = "{getleadHS.lastResult.leadsxml.leads}" >
  < mx:columns >
  < mx:DataGridColumn headerText = "Company" dataField = "leadCompany" / >
  < mx:DataGridColumn headerText = "First name" dataField = "leadFirstName" / >
  < mx:DataGridColumn headerText = "Last Name" dataField = "leadLastName" / >
  < / mx:columns >
  < / mx:DataGrid >
  
  < / mx:HBox >

  pls someone help me...

  have you ever actually send the HTTPService?

  and the flex part

  
  http://www.Adobe.com/2006/mxml">

  
         
         
      creationComplete = "getleadHS.send ()"> ""
         
             
             
             
         
     
     
  

• Problem when parsing worksheet Excel modules

  Hi all
  
  My program was running using OPA engine determination bookstores.
  Apparently trying to analyze an excel spreadsheet modules, the OPA consider an unknown attribute even if it was listed as empty in the cell in the excel spreadsheet.
  
  My data has this information
  Field1 = XXX
  Field2 = YYY
  field3 = ZZZ
  Field4 = empty
  
  The excel worksheet contains information
  Row1: is EMPTY field1, field2 is empty, field3 is empty, field4 is AAA
  row2: field1 is XXX, field2 is YYY, field3 is ZZZ, field4 is empty
  
  Record of decision:
  Cannot reach a conclusion because
  Field1 = XXX
  Field2 = YYY
  field3 = ZZZ
  and field4 is unknown
  
  Any suggestion for this?

  Are the cells in the fields 1 to 4 lines 1 and 2 representing all conditions? Is there a conclusion column? (I guess there's).

  Here's what I think is happening...

  When evaluating the logic in a rule table, he starts from the top and worked down. It does not move a line later until such time as all the previous lines has been refuted. Your first conditional row requires to verify the value for any attribute is represented in the row 1, 4 on the ground (i.e. check if or not he = AAA). If the runtime, no input value has been provided for this attribute, there is nothing for the inference check, so this line cannot be proved or disproved.

  During the test at run time, until you provide sufficient for the engine to conclude or not data line 1 applies, it will not look like line 2. This isn't that row 2 is not infer correctly, is that in your example of a test, he even did not line 2.

• Parsing JSON to ListView array problem

  I need help in parsing JSON to ListView array.

  I have no problem to parse this JSON

  [
      {
          "id": "123",
          "name": "KFC",
          "contact": {
              "phone": "+1175757",
              "twitter": "kfc"
          }
      }
  

  to this qml:

  import bb.cascades 1.0
  import bb.data 1.0
  Page {
      content: ListView {
          id: listView
          dataModel: dataModel
          listItemComponents: [
              ListItemComponent {
                  type: "item"
                  Container {
                      verticalAlignment: VerticalAlignment.Center
                      Container {
                          horizontalAlignment: HorizontalAlignment.Fill
                          verticalAlignment: VerticalAlignment.Center
                          layout: DockLayout {
  
                          }
                          Container {
                              horizontalAlignment: HorizontalAlignment.Fill
                              verticalAlignment: VerticalAlignment.Center
                              topPadding: 20
                              layout: StackLayout {
                                  orientation: LayoutOrientation.LeftToRight
                              }
                              Container {
                                  verticalAlignment: VerticalAlignment.Center
                                  leftMargin: 30
                                  Label {
                                      bottomMargin: 0
                                      bottomPadding: 0
                                      text: ListItemData.name
                                      verticalAlignment: VerticalAlignment.Center
                                      textStyle {
                                          base: SystemDefaults.TextStyles.TitleText
                                          fontWeight: FontWeight.Normal
                                      }
                                  }
                              }
                          }
                      }
                      Divider {
                      }
                  }
              }
          ]
      }
      attachedObjects: [
          GroupDataModel {
              id: dataModel
          },
          DataSource {
              id: dataSource
              source: "myjson.json"
              onDataLoaded: {
                  dataModel.insertList(data)
              }
          }
      ]
      onCreationCompleted: {
          dataSource.load();
      }
  }
  

  but I do not know how to work with this type of JSON:

  {
      "meta": {
          "code": 200
      },
      "response": {
          "myplace": [
              {
                  "id": "123",
                  "name": "KFC",
                  "contact": {
                      "phone": "+1657465",
                      "twitter": "kfc"
                  }
              }
          ]
      }
  }
  

  can someone help please!

  The problem is that DataSource will convert your JSON to a QVariantMap, and not to a QVariantList, as required by the GroupDataModel::insertList ().  Try this:

          DataSource {
              id: dataSource
              source: "myjson.json"
              onDataLoaded: {
                  dataModel.insertList(data.response.myplace)
              }
          }
  

• Satellite M30: Unknow Hard Error - could this be a problem of hard drive?

  I got my Satellite M30 for 2 years now and it never gave me any problems, until a few weeks ago. The problem started shortly after I put Windows to SP2, when I played a game it would stick for a minute or two, and then continue on as usual, the problem slowly got worse and started blue screening with "Unknown hard error" and sometimes strange balloon in the lower right corner saying unknown hardware error and then freeze it. It also took a long time to start and generally do nothing.

  Assumed it was a problem when I've upgraded to SP2, so I decided to reinstall Windows and start over again, update the BIOS while I was home.

  Once this is done it seemed fine for an hour or two, but then tried to install a game and of course, the good old blue screen appears and the whole problem starts again.

  I took it to a repair shop and explain the problem and I had re-installed Windows nothing helped, and I suspected that it may be a hardware failure, I left it with them, and 2 days later I get a call saying its all fixed and ready to be picked up, I asked what was wrong with it and they said that they re-installed Windows and sound now works fine (i.e. what I their) I said, I had made and n t worked!). I picked up (and got charged £40 to have done what I had already done). I got it home and everything seemed ok... for a few hours, then blue screens seemed to tell me any physical dumping of beginning and the usual stuff.

  I think it might be a drive problem hard, like when I tried to install a game on it at night last light CD and HARD flash drive, one for about 15 seconds, then the other for a short time, data copied from one to the other, but then the HARD drive light stayed on, and I could hear the HARD disk as if it were sticky , after about a minute of this blue and close short-listed and took some time to turn back. If I leave a couple of hours and it starts fine until the next time.

  So, after my long description on my problem, I have 2 questions,

  1. could I be right in thinking that these problems are associated with hard drive?
  2. If I'm right, is easy to replace on the M30 HARD drive and where I would buy a new?

  Thanks for your time and help,

  Kenny.

  Hello

  The blue screen appears only if you play games?

  But I agree with you. In my opinion, there would really be a hardware malfunction.
  The question is - it s a HARD drive or something different?
  Hmmm. I think that the problem is not related to the disc HARD but maybe overheating?
  According to the publication, sometimes when you play games. The game is a high performance application. All devices running with maximum performance and produce heat.

  I m not 100% sure, but maybe the high temperature has a bad influence on the system and therefore the BSOD happens.
  You suggested that the laptop run properly for about 2 years. Maybe fans can cool properly because of the dust and debris. Two years is a long time if you have not cleaned the cooling modules and fans.

• TurboCAD Pro 14.2 fails to install because Windows Installer problem.

  Problem installing Windows

  I TurboCAD Pro 14.2 and I was forced to get a new key of Activation of IMSI, as I have lost the original.  After with the new key of Activation Windows Installer contains TurboCAD for about half an hour before I give myself the opportunity to cancel the installation program or continue with it.  Only when I opt to cancel TurboCAD works.  I tried to run Microsoft Fix - it, which tells me that there is nothing wrong with what on the system, and I tried to remove and reinstall the program does not.  Also, I spent about two weeks of work, by electronic mail, with the team of the IMSI and beyond them telling me to use a utility windows install cleanup which no longer exists, nothing materialized.  I am running Windows XP SP 3; can someone help me with this? All constructive comments will be appreciated: thank you.

  For all those who have offered suggestions that I found the answer.  It seems that the whole problem is the consequence of a file named SetPdb14Pro.  I found the file among those on my Add/Remove panel.  Once I removed it the package worked without a hitch and it did not return because I now use my original password installation discs and activation code.  Here is a month lost because I don't watch carefully before I made a leap.

  Doeboy_9

• Casting poses a problem-how to fix?

  Response to a question I asked in April (see Deanglicise? Deamericanize? I have this function that takes in a string such as "publicize, promote, assign, italicize ' and spit on"publish, assign", removing redundant duplication of the suffix - ise, - IZE:
  

  create or replace function deise (instring varchar2)
  return varchar2
  is
         v_outstring         varchar2(32000);
  begin
  WITH T AS
     (SELECT  1 rn , instring
         TXT
            FROM DUAL)
  select  substr( string, 2 ) into v_outstring
  from (
   select TXT ,  rn,  pos, row_number()over(partition by regexp_replace(txt,'[ize|ise]') order by pos ) n
             from ( SELECT   TXT ,  rn, position pos
                 FROM   T
                       MODEL
                       RETURN UPDATED ROWS
                       partition by ( rn)
                       DIMENSION BY (0 POSITION)
                       MEASURES     (TXT , NVL(LENGTH(REGEXP_REPLACE(TXT,'[^,]+','')),0)+1 NB_MOT)
                       RULES
                         (TXT[FOR POSITION FROM  1 TO NB_MOT[0] INCREMENT 1] =
                        REGEXP_SUBSTR(TXT[0],'[^,]+',1,CV(POSITION)) )) t)
  where n=1
  model
  return updated rows
  partition by ( rn )
  dimension by ( row_number() over (partition by rn ORDER BY pos ) as position )
  measures ( cast( txt as varchar2(4000) ) as string )
  rules
  upsert
  iterate( 1000 )
  until ( presentv(string[iteration_number+2],1,0) = 0 )
  ( string[0] = string[0] || ',' || string[iteration_number+1] )
  order by rn;
  return v_outstring;
  end;

  Works very well, in general. Sometimes, however, I have "ORA-25137 Data Value Out of Range" errors and the line it lists as being at fault is the one who reads the measures (cast (txt as varchar2 (4000)) as String).
  
  I tried that bump up varchar2 (8000) or, indeed, to varchar2 (4001), but he refuses to accept anything more than 4000. (He is 10 g Release 2, 10.2.0.4).
  
  Is there a simple way to rewrite this function so that the casting is possible (for example) a CLOB?

  Catfive Länder wrote:
  Well, this certainly seems to be (a) a much simpler code, and (b) very successful code! The outputs seem appropriate for any entry that I could throw at it, although I'll have to do some tests much more, of course. :-)

  I realize, I push at this point, but could you maybe explain what you consider bad/excessive/redundant on the original code? I am at a loss to understand why the initial necessary so casting further suggestion / what do you have when you seem able to drop it and achieve the same type of result. Not really to be a developer of any sort (Tubby, take note!), I'm really not in a position to judge if this is 'just' compared to the original, and your ideas as to why this code all that is needed, and the original is excessive or inefficient would be useful, I think.

  Basically, MODEL is a new feature and I'm not an expert in it. But without a doubt your condition does not require the use of the MODEL clause. A simpler approach more is enough.

  (Salim champion) who offers the MODEL approach just like the TYPE clause (not saying anything wrong thereon) and tend to solve the whole problem with him;).

  Now, I would like to add to your comments on suggestion of francs.

  I personally don't think it's a bad idea. Why?

  1 SQL is basically a language used to work with data stored in the table.
  2. your condition does no table or the data in the DB. It requires even a DB.

  I think that your understanding of the rule of Tom is incorrect. He suggested that, especially when you're dealing with stuff with database.

  You condition does not require a database. If I where a java developer, I would in a java code Miss to make a call from DB. The call to DB it would be much more expensive than code written in Java.

• Scanning HP Photosmart C4585

  My scanner will not scan the entire image and scans only parts - parts every time. Any way to ensure the whole image is parsed every time?

  Hi @markdUK ,

  I see that you are not able to scan the entire image. I can help you with this.

  What operating system do you use?

  How to find the Windows Edition and the Version on your computer.

  Mac OS X: how to find which Mac OS X Version is on my computer?

  What software you scan for?

  If you use the HP Solution Center software, there should be an option in the advanced settings for the scanning glass throughout.

  If you are using Windows, download and run the Print and Scan doctor. It will diagnose the problem and could solve it automatically. Find and fix common printer problems using the tools of diagnosis HP for Windows?

  Have a wonderful day!
  Thank you.